SSRS 2012 Conditional Formatting Color Issues When Exporting to Excel

Hi all,
We recently upgraded to SQL 2012 from SQL2008 R2. I'm having a strange issue with SSRS2012.
One of the report has conditional formattings on cell background colors. Everything works fine when render the report in browser or preview mode. However, the conditional formatting stop working when export the report to Excel (no issues if
export to pdf). All cells are high-lightened with pre-defined color although it should only high-lighten those cells that fulfil the condition.
Has someone encountered this issue before ? Thanks for any help.

Hi ZZ02,
I have test the scenario in my testing environment, however, everything goes well when exporting to Excel format. The issue might be related to the expression for the conditional background color. To make further analysis, please post the expression as well
as the report design structure.
Additionally, in SQL Server 2012 Reporting Services, the Excel rendering extension renders a report to the native format of Microsoft Excel 2007-2010, the format of which is ExcelOpenXML. By default, the previous version of the Excel rendering extension,
compatible with Microsoft Excel 2003, is disabled. At this time, I suggest that you enable the Excel 2003 rendering extension by modifying the RSReportServer.config file. After that, the Excel 2003 rendering format will be available on report manager (not
available in Report Designer). So, please export the report from report manager and check the result again.
For more information about enable the Excel 2003 rendering extension, please see:
http://social.msdn.microsoft.com/Forums/en/sqlreportingservices/thread/0713de27-dcc0-4e51-81ac-5272647d171f
Regards,
Mike Yin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Mike Yin
TechNet Community Support

Similar Messages

SSRS 2012 background color format by expression issue when exporting to Excel.

We are using SSRS 2012. We have a report that conditionally formats a background color for some cells. The report renders properly in a browser and in Excel 2003 format. In Excel format all cells after the first one that meets the condition are highlighted,
even if only one cell should.
The sample expression that triggers this condition looks like this:
=IIF(Fields!VIOL_NOTE.Value="Internal","Green","No Color")
All cells after the first one that meets the condition Fields!VIOL_NOTE.Value="Internal" have a green background.
Excel 2003 (proper) results:
Excel (improper) results:
Zenon

Hi Zenon,
Based on your description, I try to reproduce the issue in my test environment, however it is work well. After export the report to Excel and Excel 2003, I can get exact same result when open the Excel file in Excel 2010.
Did you open the repot in Excel 2003 or Excel 2007-2010? Please post more deatils, so we can help to work out this issue.
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Conditional Formating colors not printed

I have an OBIEE Report that has conditional formating to display results with background colors based on the values like if actuals is greater than goal then display the number in green and if below the goal then red etc. What I am seeing is that when I display the report (Table view) on dashboard on IE6 browser, it shows all the conditional formatting colors on the dashboard but when I do print preview, the colors are lost. When printed, it prints the report without the colors. I developed the reports in IE8 version and when I view and print from IE8 browser, it prints with colors. I feel it might be a bug or incompatibility with IE6 but am not sure about that. Is there any way to resolve this issue. This report will be viewed on IE6 browser and upgrading the company wide browser is not an option.
Environment - Oracle Business Intelligence 10.1.3.4, OS: Windows, Browser - Internet Explorer 6
Thanks in advance

try tools-internet options-advanced-printing-check print background colors.

Formatting lost when exported to excel

When I export a worksheet results to excel the formatting is being lost like in my worksheet I wanted a line and space for every grouped item which is lost in excel sheet. Is there a way get around for this ?
Thanks

Not exactly sure what formatting you're having a problem with, but I'll list some of the points I can think of, of exporting to Excel and will hopefully cover it. I believe you may be referring to point 1 below, but just in case ...
1. If you have group sort on for a column or more, then when exported to Excel, you won't have those 'blank' values for the column(s) that's grouped. That's why when you know someone will be exporting to Excel, it's a pain as all group sorts are usually taken back off (which can screw up exactly what you're trying to point out in the workbook).
2. If you have a page -> item (ie: lots of values you pull down like a LOV), then I believe, that you won't get an Excel worksheet for each value in the LOV but only for the one currently displayed when you performed the File -> Export.
3. When you export to Excel, you only get actual values, no functions of how it was calculated (ie: it'll be static, not dynamic).
4. You can export to Excel using Plus and might not get the formatting characteristics you want in Excel. I've seen users specifically bring up Viewer just to get the formatting characteristics (colors, fonts, etc.) when they export from that Disco version.
5. Sometimes when you export from Disco to Excel, that actual value that gets posted in Excel is different. I know ... it sounds wierd, but it's a fact. The problem is NOT Disco, but is a problem with Windows and a setting has to be altered (although I'd have to hunt what that setting is now though). However, I've only seen this happen a few times, so definitely not the norm.
Russ

Changing default color scheme when exporting ALV report to Excel spreadshee

Hi all,
We have a bunch of FI reports created using OOPS in abap. Each of the reports has the functionality to be exported to an excel spreadsheet. When exporting to Excel, the headers are a very dark brown color, making them difficult to read and it has been requested that they are shaded a lighter color. I have not defined any sort of color scheme within the report itself, and I was wondering if there was a way to change the color scheme when exporting the report to excel. Let me know if there is anything that can be done, thanks!

check ur fcat

Prblm in Date format when exported to excel

Hi ,
I had a problem when using the Export To Excel option from Portal. The data is getting fine populated in Excel but it's in General No Specific Format. But I wanted the data to be in its original format even when exported to Excel. Like...
Country -
Date Goods Delivered
India----
01.01.2001
America----
05.12.2004
Singapore----
12.04.2003
Here the country should be of type TEXT FORMAT and Date Goods Delivered should be in DATE FORMAT(Here its visible as date but it's in General format)
I am facing problem with date, it is displayed(01.04.2006) as shown above but it's in general format. I wanted it to be in date format at excel.
I am in BW3.5 with portal version EP7.0
Please suggest the solution and I had even gone through previous forum questions related to this but couldn't get.....the solution.
points will be assigned...
Regards,
rudra.

Hi,
My end users requirement is to get all data in Standard format. We can't ask to select the date column and change the format in excel as there are more date fields(columns ).
Using macro i had one problem,even though i am not sure..
i can't enable the macro to get enabled in page load of export to excel as it is to be done at users end...
If theres any possibilty of enabling....pls let me know
Thanks for your valuable suggestions...
Regards,
rudra.

Cross Tab Formatting Problem when exported to excel

Hi There,
I got a problem with cross tab when exported to excel, Call_id field is occupying 4 cells. Below is the structure
AssignedGroup-Call_Id-Total
A--1001-
A--1011-
Total-----2-
B--1021-
B--1031-
Total-----2-
C--1041-
Total-----1-
can anyone help? How to restrict call_id to fit in single cell?
Thanks,
Jyothi
Edited by: Jyothi Yepuri on Sep 16, 2009 7:50 AM

Yeah.. crystal has giving some issues while exporting reports without SPs, especialy previous versions.
So Better to install latest SP or patches for CR 10.0. I think SP 6 is the updated one for CR10.0.
For More info Go through this link,
http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR10
Regards,
Salah

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

How do I get rid of memory issue when exporting in imovie

How do I get rid of memory issue when exporting in imovie?

Delete the content that is filling it up. Text messages, iMessages, SMS, emails, Safari Cache; essentially all data for all of the built in apps.

Alignement issue when exporting to PDF

Hello,
I'm having some alignment issues when exporting an InDesign file to PDF.
I have a couple of square pictures, touching eachother at the edges. These are aligned bang on in InDesign (the lines overlap), but when exporting to a PDF and viewing in there, it seems that some seem to jump up slightly.
Is this just a display issue or a setting issue when exporting to PDF?
Thanks
Benny

The detail is cropped too tight for me to tell how many photos are intersecting there. Is there a vertical intersection as well? If not, I think you're looking at a very slightly non-rectangular frame, if there is, then you might still be looking at a non-rectangular frame, or the frames are not perfectly aligned, which doesn't surprise me if you snapped to a guide -- I find that less than 100% reliable since CS6.
Presuming that you've zoomed in to show us the problem, that's probably a single pixel misalignment and you'd be very hard pressed to see it in printed output without a loupe.
You can check the bottom edge of the top photo, and the top edge of the bottom photo(s) for being out of horizontal by using the direct select tool to select the corner points and seeing if the y-coordinate is the same on both sides of the frame.
My printer tell me to always overlap frames, rather than butting them, for trapping, for what that's worth, but I don't always do what he says, and I've never had a problem.

ALV GRID with icon fields. When exports to Excel, icon fields are emtpy.

Hi all,
In our SAP system (6.0 ECC) we've noticed the following behaviour:
In ALV GRID with icons (color lights for example...) when we export the list to Excel format with the standard button bat, the icon column is always empty.
We think that in previous SAP version (4.7), the code corresponding to the icon appeared (For example @08@ for green light).
It's possible to have tha same functionality in this new version like in 4.7?
Regards.
Edited by: Ole ES on Nov 17, 2010 6:05 PM

Hi,
Check the format in which you export to Excel (MHTML, XML, ...) and try antoher one.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/66/79ad48157f11d2953700a0c930328a/content.htm
I think the integrated Excel mode shows '@08@'.
Best regards,
Guillaume

Issue with export in Excel in WAD

Hi
I have an issue with export to excel in WAD. I have a web template with two or more tabs.
On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
can anyone help / give a clue what to look for.
br,
John
Edited by: John Dolph on Apr 15, 2010 10:50 AM

Hi
Sorry I has been a while but the problem still occurs,
I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
<bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
            <bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
                <bi:BUTTON_LIST type="ORDEREDLIST" >
                    <bi:BUTTON type="COMPOSITE" index="2" >
                        <bi:CAPTION value="EXCEL" />
                        <bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
                        <bi:ACTION type="CHOICE" value="INSTRUCTION" >
                            <bi:INSTRUCTION >
                                <bi:EXPORT >
                                    <bi:ITEM_REF_LIST type="UNORDEREDLIST" >
                                        <bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
                                        <bi:ITEM_REF index="2" value="TAB_A_CHART" />
                                        <bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
                                        <bi:ITEM_REF index="4" value="TAB_B_CHART" />
                                    </bi:ITEM_REF_LIST>
                                    <bi:EXPORT_FORMAT value="XLS" />
                                </bi:EXPORT>
                            </bi:INSTRUCTION>
                        </bi:ACTION>
                    </bi:BUTTON>

Crystal Report 2008 doesn't set page size when export to excel file

Hi,
I am using Crystal Report 2008 Developer edition.
At Crystal report design time setting the below page setup:
Page Options -
to A3(297X420 mm)
Orientation --- Landscape
and using the following code in .net (c#)
I am using below format options to export in excel in .net 2005
ReportDocument oReport = new ReportDocument();
oReport.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
oReport.FormatEngine.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA3;
if (aParamlist.ReportFormat == ReportFormatEnum.MicrosoftExcel)
ExcelFormatOptions excel = new ExcelFormatOptions();
excel.ExcelUseConstantColumnWidth = false;
// Use detail section one as a guideline to determine column width
excel.ExcelAreaGroupNumber = 1;
//excel.ExcelAreaType = AreaSectionKind.Detail;
excel.ExcelAreaType = AreaSectionKind.Detail;
// Prepare exporting options
ExportOptions export = oReport.ExportOptions;
export.FormatOptions = excel;
export.ExportFormatType = ExportFormatType.Excel;
oReport.Export();
when export to excel it doesn't set the Paper Size to A3(297X420 mm).
Is there any way to set the paper size while export to excel or in other formats also????
Thanks & Regds,

Hi,
thanks for your email.
This is not happening in development environment.It is setting the paper size anf paper orientation properly.
this is happening in the production environment where only redist installation is done.
thanks

Does not display axis label in graph when exported to excel

I have a wierd issue.I have a report with graph with coloum chart and axis labels description on x axis.WHen i export the report to PDF everything looks OK.But when i export it to excel few axis labels disapper.Out of 12 labels only 2 apper when exported to excel.Has anyone encountered this issue.
If so is there a way to fix this.
PS: I am using BO XI 3.1 Webi.
Thank you,
Sanjeev

hi,
I have tried this out with a sample.
In WEBI preview mode and PDF, all axis labels will appear fine.
But when exported to excel, some labels will disappear.
Workaround: We have to increase the chart size in Excel till all axis labels appear clearly.
Regards,
Vamsee

Reports output delayed when exported to Excel using OLE2

Hi All,
Platform - Oracle Application Server 10g Release 2 10.1.2.3 on Windows 32 bit.
The report output is getting generated in a minute when exported to PDF i.e destype=cache & desformat=pdf. When we generate the output to excel is considerably delayed. It is taking time and internal server error is occuring.
1) Report developed with simple query
2) Used RPT2XLS procedure which uses OLE2 builtin to export report output into excel.
3) Called RPT2XLS.run procedure in After-Report trigger of the report.
4) We have relased all memory objects in the RPT2XLS package after exporting data and there is no EXCEL.exe running once the file is generated.
System parameters used in the URL.
. destype=file
desformat=pdf
CONTAINSOLE=yes (Required for exporting OLE2 objects into Excel in report)
desname=path & name of the file.
I have gone through the tuning documents for reports server and increased minengine, maxengine and initengine parameters of the reports engine and also changed maxconnect and IdleTimeout parameters in reports server configuration file.
What might be the reason for delaying in the output of the reports when exported to Excel. Can the guys with special knowledge on this area help us in getting out of this issue.
Thanks in advance.

hey all,
Thanks everyone for the reply.
I am using the foloowing field cat:
l_col_pos = l_col_pos + 1.
    wa_fieldcat-col_pos = l_col_pos.
    wa_fieldcat-outputlen = 32.
     wa_fieldcat-fieldname = 'SOLLWERT'.
     wa_fieldcat-inttype   = 'P'.
*    wa_fieldcat-tabname = 'i_final'.
    wa_fieldcat-seltext_l = text-t11.         "Target Value
    APPEND wa_fieldcat TO i_fieldcat.
    CLEAR wa_fieldcat.
I have use this also in the field cat but stil i get space in the excel header.
wa_fieldcat-REF_FIELDNAME = 'SOLLWERT'.
*    wa_fieldcat-REF_TABNAME = 'QAMV'.
Also the space comes with the descrip[tion in the cell of excel.
its like [space Target Value] and i dont need this Space.
I have also used wa_layout-colwidth_optimize = 'X'. but it doesnt wrk.
Please suggest

SSRS 2012 Conditional Formatting Color Issues When Exporting to Excel

Similar Messages

Maybe you are looking for