Ssrs 2012 - dataset does not populate in designer

Hi,
Stored proc. (sp) returns fields in the query designer of SSRS 2012.
but the dataset does not populate fields in the designer.
in case it makes any difference, note that the sp uses functions in several places.
Any suggestions please?
Thanks

Hi there,
Does the stored proc use temporary tables? Are multiple resultsets returned?
Can you try simplifying the stored procedure until it populates the fields properly?
cheers,
Andrew
Andrew Sears, T4G Limited, http://www.performancepointing.com

Similar Messages

Solaris 11: configuring/installing/verifying zone: dataset does not exist

Hello all, I am working my way through setting up a dataset via the instructions listed here
http://docs.oracle.com/cd/E23824_01/html/821-1460/z.conf.start-85.html
http://docs.oracle.com/cd/E23824_01/html/821-1460/z.inst.task-2.html
I am now trying to verify my zone (*zoneadm -z stfsun1 verify*) and I get the following error message:
"*could not verify zfs dataset waas/stfsun1: dataset does not exist*
*zoneadm: zone stfsun1 failed to verify*"
I did a search but nothing of benefit showed up. Can anyone point me in the right direction?
Edited by: thisisbasil on May 22, 2012 9:04 AM

zonecfg -z stfsun1 info
zonename: stfsun1
zonepath: /zones/stfsun1
brand: solaris
autoboot: true
bootargs: -m verbose
file-mac-profile:
pool:
limitpriv: default,sys_time
scheduling-class: FSS
ip-type: exclusive
hostid: 80825649
fs-allowed:
[max-sem-ids: 10485200]
fs:
     dir: /usr/local
     special: /opt/local
     raw not specified
     type: lofs
     options: []
anet:
     linkname: net0
     lower-link: auto
     allowed-address not specified
     configure-allowed-address: true
     defrouter not specified
     allowed-dhcp-cids not specified
     link-protection: mac-nospoof
     mac-address: random
     mac-prefix not specified
     mac-slot not specified
     vlan-id not specified
     priority not specified
     rxrings not specified
     txrings not specified
     mtu not specified
     maxbw not specified
     rxfanout not specified
anet:
     linkname: net1
     lower-link: auto
     allowed-address not specified
     configure-allowed-address: true
     defrouter not specified
     allowed-dhcp-cids not specified
     link-protection: mac-nospoof
     mac-address: random
     mac-prefix not specified
     mac-slot not specified
     vlan-id not specified
     priority not specified
     rxrings not specified
     txrings not specified
     mtu not specified
     maxbw not specified
     rxfanout not specified
device:
     match: /dev/wifi/*
     allow-partition not specified
     allow-raw-io not specified
device:
     match: /dev/ipnet/*
     allow-partition not specified
     allow-raw-io not specified
device:
     match: /dev/*dsk/*
     allow-partition not specified
     allow-raw-io: true
dedicated-cpu:
     ncpus: 1
     importance: 10
capped-memory:
     physical: 1G
     [swap: 2G]
     [locked: 500M]
attr:
     name: comment
     type: string
     value: "This is the CodeTEST work zone."
dataset:
     name: waas/stfsun1
     alias: stfsun1
rctl:
     name: zone.max-swap
     value: (priv=privileged,limit=2147483648,action=deny)
rctl:
     name: zone.max-locked-memory
     value: (priv=privileged,limit=524288000,action=deny)
rctl:
     name: zone.max-sem-ids
     value: (priv=privileged,limit=10485200,action=deny)
Edited by: thisisbasil on May 22, 2012 9:56 AM

Cluster does not populate in sub-vi unless front panel is opened

I have a sub-vi that saves my data to a database and the cluster
containing the data will not populate unless I open the front panel
when it executes. What could possibly cause this?

It is the readings cluster that does not populate. That is the input cluster for the vi. When I run in the development environment the program saves correctly without opening "Save Readings.vi". However after the complete program is compiled the data will not save unless "Save Readings.vi" is opened when it executes. I have attached the missing vis
Attachments:
Log SQL.vi ‏27 KB
Connect SQL Server.vi ‏48 KB
Update Process Info.vi ‏81 KB

Lucreate zfs BE dataset does not exist

Hi guys,
I'm trying to upgrade a Solaris 10 full zfs with liveupgrade but unfortunatly after one day search and after re-reading all sunDocs I block on and I cannot create a new BE.
The final objective is to have the server on release 10 10/09 for VDI3.1.1
If someone get an idea would be so great.
tks
Please find here all informations:
SunOS lima 5.10 Generic_142900-02 sun4v sparc SUNW,Sun-Blade-T6340
Solaris 10 10/08 s10s_u6wos_07b SPARC
NAME USED AVAIL REFER MOUNTPOINT
rpool 15.0G 119G 94K none
rpool@install 0 - 94K -
rpool/ROOT 5.83G 119G 18K legacy
rpool/ROOT@install 0 - 18K -
rpool/ROOT/s10s_u6wos_07b 5.83G 113G 5.71G /
rpool/ROOT/s10s_u6wos_07b@install 127M - 5.70G -
rpool/ROOT/s10s_u6wos_07b@sol10_u8 394K - 5.71G -
rpool/ROOT/sol10_u8 0 119G 5.71G /.alt.tmp.b-.7.mnt/
rpool/dump 2.00G 119G 2.00G -
rpool/export 112K 1024M 20K /export
rpool/export@install 16K - 20K -
rpool/export/home 75.5K 1024M 56.5K /export/home
rpool/export/home@install 19K - 31K -
rpool/flar 4.38G 3.62G 4.38G /var/flar
rpool/flar@install 67K - 68K -
rpool/opt 134M 890M 133M /opt
rpool/opt@install 200K - 89.0M -
rpool/tarantella 2.61G 397M 1.11G /opt/SUNWvda
rpool/tarantella@install 491M - 491M -
rpool/tarantella/var 1.02G 397M 1.02G /var/tarantella
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
old yes yes yes no -
sol10_u8 no no no yes -
The errors :
root@ lima #lucreate -n sol10_u8
Analyzing system configuration.
Comparing source boot environment <old> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <sol10_u8>.
Source boot environment is <old>.
Creating boot environment <sol10_u8>.
Cloning file systems from boot environment <old> to create boot environment <sol10_u8>.
Creating snapshot for <rpool/ROOT/s10s_u6wos_07b> on <rpool/ROOT/s10s_u6wos_07b@sol10_u8>.
Creating clone for <rpool/ROOT/s10s_u6wos_07b@sol10_u8> on <rpool/ROOT/sol10_u8>.
Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/sol10_u8>.
ERROR: cannot open ' ': dataset does not exist
ERROR: cannot mount mount point </.alt.tmp.b-.7.mnt/opt> device < >
ERROR: failed to mount file system < > on </.alt.tmp.b-.7.mnt/opt>
ERROR: unmounting partially mounted boot environment file systems
ERROR: cannot mount boot environment by icf file </etc/lu/ICF.2>
ERROR: Unable to mount ABE <sol10_u8>
ERROR: Unable to clone the existing file systems from boot environment <old> to create boot environment <sol10_u8>.
ERROR: Cannot make file systems for boot environment <sol10_u8>.

In fact the /opt were seperated to include this in the / resolve the issue.

External display on late 2012 macmini does not go to sleep.

External display on late 2012 macmini does not go to sleep, instead the content freezes. After Pram reset it does go to sleep, till it undergoes next system sleep cycle (hibernatemode 25). I need to suspend it to disk because it is an offgrid setup and the power needs to be cut between Sessions. Display is connected to the hdmi port. Runing OS 10.8.4. Reinstalling did not help, neither. I have struggled with this for half a year now, it accured about 2 month after first use of the machine.
Thank you for possible help!

Hey
Thank you for the quick anwswer!
I am aware of what you described, here is the preferece file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Custom Profile</key>
          <dict>
                    <key>AC Power</key>
                    <dict>
                              <key>AutoPowerOff Delay</key>
                              <integer>14400</integer>
                              <key>AutoPowerOff Enabled</key>
                              <integer>1</integer>
                              <key>Automatic Restart On Power Loss</key>
                              <integer>0</integer>
                              <key>Disk Sleep Timer</key>
                              <integer>10</integer>
                              <key>Display Sleep Timer</key>
                              <integer>0</integer>
                              <key>Hibernate File</key>
                              <string>/var/vm/sleepimage</string>
                              <key>Hibernate Mode</key>
                              <integer>25</integer>
                              <key>PrioritizeNetworkReachabilityOverSleep</key>
                              <integer>0</integer>
                              <key>Sleep On Power Button</key>
                              <integer>1</integer>
                              <key>Standby Delay</key>
                              <integer>4200</integer>
                              <key>Standby Enabled</key>
                              <integer>0</integer>
                              <key>System Sleep Timer</key>
                              <integer>0</integer>
                              <key>TTYSPreventSleep</key>
                              <integer>1</integer>
                              <key>Wake On LAN</key>
                              <integer>0</integer>
                    </dict>
          </dict>
          <key>LastSleepUUID</key>
          <dict>
                    <key>Date</key>
                    <date>2013-07-20T21:41:21Z</date>
                    <key>UUID</key>
                    <string>53DDFFCE-AFA3-402F-B35E-8CBED6E293DF</string>
          </dict>
</dict>
</plist>
Next on my list would be an installation from scracht - wich i would obviously love to avoid
The bewildering thing is that through a pram reset i can get the display to sleep once again...
Maybe a hardware prob?
Might want to check using the thunderbolt port instead, as soon as i can afford the adaptor.
Anyway i will go to offline world for some time now, on a crazy bicycle tour trough remote eastern europe.
I would love to hear from you on an occasion of a peek to cyberworld during my trip!
So long
Senior KLikklac

Step 3 in payment wizard does not populate any BP's?

Hi all-
We have a customer that is trying to run the payment wizard for outgoing payments. In Step 3 the payment wizard does not populate any BP's? We think we have all of the settings correct. Is there anything 'not obvious' that might prevent the vendors from populating on this step 3 (we choose all vendor groups and vendors DO have balances).
Any ideas as to where to look or what to check would be greatly appreciated.
Thanks Pat.

Hi Pat,
the most common reason for this is that no payment run defaults were selected. As for the definitions necessary, please have a look at note 725786 - Definitions necessary for the payment wizard.
All the best,
Kerstin

XSLT Mapper file does not open in design view

XSLT mapper file in the composites exported from weblogic EM as a jar and imported in JDeveloper 11.1.14 does not open in design view. There is no option of design view itself in the tab structure. It is viewable only in source view.
Please suggest, how do I view the desgn view of the xslt mapper?
Thanks,
Promiit

When you export composites from Weblogic EM in jar format, the resulting files are differently formatted from what was used for deployment.
So, basically, the XSLT file, you are trying to open in Jdeveloper has lost the "mapSources" and "mapTargets" sections, which are generally present in the header section of the jdeveloper-generated XSLT file. Try to manually hand-crack those sections and you should be good to go.
Hope it helps !

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

Trying to verify my app using codesign, but it fails with "does not satisfy its designated Requirement"

Hello,
When attempting to verify my ios app using codesign it fails:
macmini:MyApp admin$ codesign -vvvv Payload/MyApp.app
Payload/MyApp.app: valid on disk
Payload/MyApp.app: does not satisfy its designated Requirement
I tried to diagnose it, so I ran this command that as far as I know shows what the requirements are:
macmini:MyApp admin$ codesign -d -r- Payload/MyApp.app Executable=/Volumes/Share/Temp/appstore/MyApp.3.12.2.0/Payload/MyApp.app/MyApp designated => identifier "com.bla1.bla2" and certificate root = H"40characterstring"
But I'm not sure how to proceed now. The identifier looks correct and not sure what to do with that 40 character string for the certificate root. Any ideas?
Thanks in advance!

Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps.

PhpBB2 source code does not show in design view /CS3

I would like to customize a php bulletin board.
The default bulletin board page does not show in design view.
Is there a way to do it , such that php code can be written
by DreamWeaver via the design view ?

> The files I am trying to edit, or that is think I should
be trying to edit ,
> are
> index.php , and in the includes file template.php
If I am sorting this out correctly, which i am _not_ sure of
at the moment:
those aren't .tpl files.
they are .php files, and are part of the forum. They aren't
displaying in
design view because they are all php.
You need to find and edit the template files.
In previous link given:
http://www.phpbb.com/community/viewtopic.php?t=10764
<q>
So where do I find these great 'templates'?
Look in /templates/subSilver (thoroughout the FAQ I will be
using subSilver,
the default template. If you are using a different template
then change the
folder you look in accordingly). You will see a collection of
files there.
The templates are the ones with the file extension '.tpl' The
majority of
files in that folder are .tpl files. </q>
strongly suggest you make a backup copy of anything you try
to touch.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Net Weight (NTGEW) does not populate in table VBRP and LIPS for Purch Order

The net weight field (NTGEW) does not populate in tables VBRP and LIPS when created from a Purchase Order. The field Net Weight (NTGEW) does populate when created from a sales order. Do you know if there is a way to make the field populate when created from a Purchase order?
Thanks,
Ta

Hi,
Ta
In Material master Basic Data tab 1, you have to maintain Gross wgt and net weight. then when you creating purchase order, The Item level, Additional data tab you will able see Gross and net wgt.
I hope solved your problem.
Regards....
Sanjeev

Group shows in contacts but does not populate to send?

Say I want to send or forward an email to a group-- it works fine from the desktop. Although the iPhone Contacts book shows all members correctly, so I guess they are syncing properly, and when I type the name into the Send To field it autofills the group name, it then informs me that this doesn't look like a valid email address and does not populate with group addresses.
I see a number of folks have had similar questions but I'm not seeing an answer. IS there one? (iPhone 4, latest OS)

the hd of the macbook shows both the old itunes folder (4123 songs, 25 GB) AND the new itunes folder (all songs, same size)
both? on the new MB? where are these located?
Your iTunes folder should be in the SAME relative position on the new Mac as on the old. If not, then try copying it to that place (e.g. ~user/Music/), then relaunch iTunes with the option key held down, and when asked to Choose Library.., point it to your iTunes folder. (iTunes needs a Library file pointing to a Music folder in order to display and play your music.)

EXCHANGE ACCOUNT ON MAC MAIL DOES NOT POPULATE SOMETIMES. WHY??

Since installing Mountain Lion on our computers (2) my exchange account for email does not populate everytime. Sometimes it does and sometimes it does not. Why does this happen? If I reboot or close mail and reopen it sometimes will populate. But not always??? Why?

Are you certain it is not a limitation with your SMTP-server? OR the receiving end of your larger-than-10MB message?
Try and send a big one to yourself. If it doesn't work, try a free SMTP server.

If Muse does not support responsive design, can someone tell me why I have seen 100% browser width

If muse does not support responsive design (and therefore cannot adapt to the differing sizes in browser width of different devices, so I understand it) , as I have read on these forums and been told by Adobe's support tech's via chat support, can someone please explain how the 100% browser width slideshows that I have seen on Adobe's featured Site of the Day sites, were acheived? Are these sites only able to display correctly on the same size screen? If I cannot create a site in muse that displays a constant design on a laptop, desktop, or tablet screen, then why should I use this program at all, and why isn't that dislcaimer right up front to save folks like me hundreds of dollars in cloud subscription fees and hours designing a site only to find out that it will look like crap on 2 of the three devices any one uses to view it???? I was sent here for this question by the support team at Adobe. Hopefully someone has a workaround, because Adobe apparently are nonplussed.

If muse does not support responsive design (and therefore cannot adapt to the differing sizes in browser width of different devices, so I understand it) , as I have read on these forums and been told by Adobe's support tech's via chat support, can someone please explain how the 100% browser width slideshows that I have seen on Adobe's featured Site of the Day sites, were acheived? Are these sites only able to display correctly on the same size screen? If I cannot create a site in muse that displays a constant design on a laptop, desktop, or tablet screen, then why should I use this program at all, and why isn't that dislcaimer right up front to save folks like me hundreds of dollars in cloud subscription fees and hours designing a site only to find out that it will look like crap on 2 of the three devices any one uses to view it???? I was sent here for this question by the support team at Adobe. Hopefully someone has a workaround, because Adobe apparently are nonplussed.

Cannot preview SSRS report in Visual Studio 2012 - assembly does not allow partially trusted callers

Hi,
I have an SSRS report that works fine in Visual Studio 2008 BIDS. This report references a .Net assembly namely:
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
I use this assembly in some simple Code functions in the report. e.g.
System.Web.HttpUtility.UrlEncode(inURL).ToString
I have converted the SSRS project to 2012 and am trying to preview the report. However, I get an error relating to: "That assembly does not allow partially trusted callers". If i deploy the rdl to my local SSRS it renders fine, but
how do I fix Visual Studio to preview the report without error? This is highly annoying.
My Visual Studio version is:
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3402.0
Any help is appreciated on this one.
Regards,
MrHH

Hi MrHappyHead,
According to your description, you used custom assembly in the report, when you run the report in Visual Studio 2008, the report works fine. When you run the report in Visual Studio 2012, the error message occurred: "That assembly does not allow partially
trusted callers". But the report works fine after you deployed it to report manager.
Only applications that are fully trusted by the runtime code access security system are allowed to access a shared managed code assembly that is not explicitly marked with the System.Security.AllowPartiallyTrustedCallers attribute. A partially trusted assembly
(one that is registered in SQL Server with the SAFE or EXTERNAL_ACCESS permission set) that attempts to access a strong-name signed assembly without this attribute causes a System.Security.SecurityException to be thrown. To troubleshoot the problem, please
refer to the following steps:
Add namespace system.security to AssemblyInfo.cs file
Add [assembly:allowpartiallytrustedcaller] to the file.
Set trust level to "Full" in web.config file
For more information, please refer to the following document:
http://support.microsoft.com/kb/2869522/en-us
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Ssrs 2012 - dataset does not populate in designer

Similar Messages

Maybe you are looking for