SSRS 2012 service application error in sharepoint 2010

Hi,
I have installed MS SQL SERVER 2012 enterprise edition and sharepoint 2010 SP2 standalone as i want to learn a few things. Everyting went smooth upto the point when i wanted to configure a Create the Reporting Services Service application in sharepoint.
Firstly i cant change the account from network service on the checkbox predifined under Select security account for this application pool.
Secondly I get a error if i try to proceed >>>>> "The database engine
instance 'SERVER\SharePoint' does not meet the edition requirements for the Reporting Services database."
Please help me on this one im stuck i cant proceed

Hello,
I think this thread may help you:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/dddc7f63-935d-40fa-8402-ec43bd288c56/cant-create-a-ssrs-2012-service-application-in-sharepoint-2010?forum=sqlreportingservices
http://blogs.msdn.com/b/psssql/archive/2013/02/20/rs-database-engine-does-not-meet-edition-requirements.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

New SSRS 2012 Service Application Fails to Upgrade ReportServer Database

Hi -
I am in the middle of an SSRS upgrade from 2008R2 to 2012, SP 2010 integrated, without upgrading the database engine. This is on my DEV environment. I am running into problems when I add the new SQL Server Reporting Services Service Application through Central
Administration. I am keying in the previous db names, so they will be upgraded, "ReportServer". After clicking OK, a screen pops up notifying me that "ReportServer" and "ReportServerTempDB" will be upgraded. So far so good
right? Well as it is processing, it returns with the error found at the bottom:
The correlationID is nowhere to be found in the ULS Logs. I turned on Verbose logging and still no luck. I have restored the ReportServer database from a backup from 3 days ago and tried again. Same error, different correlation ID, not found
in ULS logs. NOTE: I first encountered a specific permissions error for the service account I was using. That was nice and descriptive :). Changed the permissions to db_owner and sys_admin (for overkill) and now this non-descriptive error appears. I
have a few questions:
1. I have gone through the same process of adding a new service application and let a new set of the 3 SSRS db's be created with a different name. But that means I lose all previous subscriptions, data source connections
to the rdls, etc. Is there a way to port/migrate over the previous ReportServer db contents to the newly created db's? I tried a simple SSIS transfer of each table, and as expected I immediately received FK contraint errors, ID Inserts and so forth.
2. Why wouldn't the correlation ID be showing up with verbose tracking?
3. Does anyone know common reasons why the previous RS databases would not be successfully upgraded???
Thank you for any and all help. I am in the position of being able to roll back to snapshots created Thursday morning of the entire SP farm, but we are now at the point of having consultant work being lost so I am really trying hard to get this upgrade to
be successful and done in our DEV environment.

I restored to a backup of the databases REportServer and ReportServerTempDB that I took last night before I tried to manually update them with writing out the SQL File via Powershell. I tried to have the Service Application upgrade the database
again, knowing it would fail, which it did, and am now reviewing the logs in the location you mentioned above. For the 2 minutes that the failure could have happened during, all I see is OWSTIMER.EXE (0x07CC) errors, which I'm fairly positive
are unrelated, mainly cause they keep occurring round the clock and a caching error? Again, I am trying to simply find out why the Service Application upgrade the db's and have reverted back to a previous state. I felt the collation errors i was troubleshooting
above were too far down the rabbit hole.
Batch Read on counter \servername\SharePoint Foundation\*\Process ID get 3 instances
1fe34924-470c-42a8-af5d-f60509c31aff
02/08/2014 13:43:00.91 OWSTIMER.EXE (0x07CC)
0x1204
SharePoint Foundation General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_CSTATUS_BAD_COUNTERNAME.
1fe34924-470c-42a8-af5d-f60509c31aff
02/08/2014 13:43:00.91 OWSTIMER.EXE (0x07CC)
0x1204
SharePoint Foundation General
ff69 Medium
PDH failure on counter \servername\SharePoint Publishing Cache\\Publishing cache hit ratio with error Unknown error (0xc0000bc0)
1fe34924-470c-42a8-af5d-f60509c31aff
02/08/2014 13:43:00.93 OWSTIMER.EXE (0x07CC)
0x1204
SharePoint Foundation General
563a Medium
Unable to create system performance counter servername\SharePoint Publishing Cache\Publishing cache hit ratio\. The following exception was thrown: System.ComponentModel.Win32Exception: Unknown error (0xc0000bc0) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS
status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.Initialize() at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.Utilities.SPPerformanceCounterMonitorInternal.UpdateValue()
at Microsoft.SharePoint.Utilities.SPPerformanceCounterMonitorInternal.Create(String computer, String category, String counter, String instance)
1fe34924-470c-42a8-af5d-f60509c31aff
02/08/2014 13:43:00.93 OWSTIMER.EXE (0x07CC)
0x1204
SharePoint Foundation General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_CSTATUS_BAD_COUNTERNAME.
1fe34924-470c-42a8-af5d-f60509c31aff
02/08/2014 13:43:00.93 OWSTIMER.EXE (0x07CC)

Can you refine people search results using a SharePoint 2013 search service application connected in SharePoint 2010?

We have an SP2010 farm which is now using some of the service applications from an SP2013 farm, including the search, managed metadata and user profile. This is part of an upgrade programme of work which will involve upgrading infrastructure and
then gradually the sites, and this is seen as one way to minimise the impact.
So, the SP2010 search results are being generated by the SP2013 which is indexing the SP2010 content. The initial results appear fine, however, the refiners in the people results for Job Title and Department are no longer working. We are receiving
a 404 page not found, even though the page is there as was working before.
If we compare the URL generated in SP2010 for refining results to an OOTB SP2013 search centre site, there is clearly a big difference to the format. Example below is where LastName is Smith and then refined where Department is HR.
SP2010 URL which now gives a 404 error:
http://intranet2010/search/pages/peopleresults.aspx?k=LastName%3Asmith&r=%22owstaxIdSPShDepartment%22%3D%23832e3479%2Dd168%2D4620%2Dac69%2D9b00a4c4205b%3A%22HR%22
OOTB SP2013 URL:
http://intranet2013/search/pages/peopleresults.aspx?k%3Asmith#Default=%7B%22k%22%3A%22smith%22%2C%22r%22%3A%5B%7B%22n%22%3A%22Department%22%2C%22t%22%3A%5B%22%5C%22%C7%82%C7%824335%5C%22%22%5D%2C%22o%22%3A%22and%22%2C%22m%22%3Anull%2C%22k%22%3Afalse%7D%5D%7D
I've looked at the URL decoded versions so can see how the query is built up.
Any ideas? Is this even possible?
Matt

All working now. Turns out there was an entry in the web.config which was causing issues.
<denyQueryStringSequences>
<add sequence="ID" />
</denyQueryStringSequences>
Seems IIS is denying something in the query string. We removed the whole section as was not needed.
http://www.iis.net/configreference/system.webserver/security/requestfiltering/denyquerystringsequences
Thanks to a colleague who spotted this; I would've never of thought to check the web.config for something like this.

Server Error in '/' Application. (while opening sharepoint 2010 intranet portal )

Hi All,
i am facing a error while opening the my SharePoint 2010 internet portal
"HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly."
please help me to fix this issue.
Regards,
Sudhanshu

Can be everything but not related (Of topic)to this forum.
Try a sharepoint one
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=sharepoint&filter=alltypes&sort=lastpostdesc
Success
Cor

SSRS 2012 Excel Rendering Error

Hi
I need help
Platform
Sharepoint 2013
SSRS 2012 integrated in sharePoint 2013
I've no problem when I export my report (25000 records) to EXCELOPENXML format, but each time I try to export it with 140 000 records i've always the error described below , however I can export it to csv format
at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream
createAndRegisterStream)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
--- End of inner exception stack trace ---;
w3wp!library!1b!02/25/2014-12:18:44:: e ERROR: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.Threading.ThreadAbortException: Thread was being aborted.
at System.AppDomain.GetId()
at System.Threading.Thread.GetCurrentCultureNoAppX()
at Go17(RegexRunner )
at System.Text.RegularExpressions.RegexRunner.Scan(Regex regex, String text, Int32 textbeg, Int32 textend, Int32 textstart, Int32 prevlen, Boolean quick, TimeSpan timeout)
at System.Text.RegularExpressions.Regex.Run(Boolean quick, Int32 prevlen, String input, Int32 beginning, Int32 length, Int32 startat)
at System.Text.RegularExpressions.Regex.Match(String input)
at Microsoft.ReportingServices.ReportProcessing.Validator.ValidateColor(String color, Color& c, Boolean allowTransparency)
at Microsoft.ReportingServices.OnDemandReportRendering.ReportColor..ctor(String color, Boolean allowTransparency)
at Microsoft.ReportingServices.Rendering.ExcelOpenXmlRenderer.OpenXmlGenerator.AddColor(String colorString)
at Microsoft.ReportingServices.Rendering.ExcelRenderer.Layout.LayoutEngine.ItemInfo.FillBorders(RPLStyleProps style, Boolean omitBorderTop, Boolean omitBorderBottom, IExcelGenerator excel)
at Microsoft.ReportingServices.Rendering.ExcelRenderer.Layout.LayoutEngine.RenderNewItem(IRowItemStruct item, Int32 top, Int32 topRow, IExcelGenerator excel, String pageContentKey, Dictionary`2 sharedBorderCache, Dictionary`2 sharedImageCache,
Boolean& autosizableGrow, Boolean& autosizableShrink)
at Microsoft.ReportingServices.Rendering.ExcelRenderer.Layout.LayoutEngine.RenderPageToExcel(IExcelGenerator excel, String key, Dictionary`2 sharedBorderCache, Dictionary`2 sharedImageCache)
at Microsoft.ReportingServices.Rendering.ExcelRenderer.MainEngine.RenderRPLPage(RPLReport report, Boolean headerInBody, Boolean suppressOutlines)
at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream
createAndRegisterStream)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.Library.RenderFromSnapshot.CallProcessingAndRendering(ProcessingContext pc, RenderingContext rc, OnDemandProcessingResult& result)
at Microsoft.ReportingServices.Library.RenderStrategyBase.ExecuteStrategy(OnDemandProcessingResult& processingResult)
w3wp!wcfruntime!1b!02/25/2014-12:18:44:: e ERROR: Reporting Services fault exception System.ServiceModel.FaultException`1[Microsoft.ReportingServices.ServiceContract.RsExceptionInfo]: An unexpected error occurred in Report Processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
An unexpected error occurred in Report Processing. ---> System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors (Fault Detail is equal to Microsoft.ReportingServices.ServiceContract.RsExceptionInfo).
Any solutions

Hi Vichu,
According to your description, you encountered the timeout issue when rendering your report. Right?
In Reporting Services, sometimes this issue happens when rendering big report, and it exceed the default Query Timeout time. Generally, we increase the Query Timeout and Session Timeout so that it will have more time to retrieving data.
In this scenario, since you have done this adjustment and the issue still exists randomly. We suggest you optimize the performance of your report. Please refer to the articles below:
Processing large reports:
http://technet.microsoft.com/en-us/library/ms159638.aspx
Performance (Reporting Services):
http://technet.microsoft.com/en-us/library/bb522786.aspx
Improving report performance with caching:
http://technet.microsoft.com/en-us/library/ms155927.aspx
Report performance optimization tips:
http://blogs.msdn.com/b/robertbruckner/archive/2009/01/08/report-performance-optimization-tips-subreports-drilldown.aspx
In addition, we recommend you install the Updates for SSRS 2012:
http://sqlserverbuilds.blogspot.com/
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SQL Exceptions, transport-level errors on SharePoint 2010 App Server

SharePoint 2010 becomes inaccessible 2-3 times per day. It happens at approximately the same times: 8 PM, 1 AM and 1 PM. It is inaccessible for about 3-4 minutes and then comes back on its own.
During the time it is down, we see the following errors in the event viewer on the application server:
EventID: 5586 Task Category: Database -
Unknown SQL Exception 64 occurred. Additional error information from SQL Server is included below.A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The specified network name is no longer available.)
EventID: 3 Task Category: None -
.Net SqlClient Data Provider: System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error:
0 - The specified network name is no longer available.)
EventID: 6398 Task Category: Timer -
The Execute method of job definition Microsoft.Office.Server.Search.Monitoring.HealthStatUpdateJobDefinition (ID f9db48f1-f115-47ab-99b6-552460cbb782) threw an exception. More
information is included below. A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
EventID: 8086 Task Category: Business Data -
The BDC Service application failed due to a SQL Exception: SQLServer host ums1spd1v. The error returned was: 'A transport-level error has occurred when sending the request to
the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)'
The SharePoint logs have errors during the same time period saying the same kinds of things: Sql exception raw message: A transport-level error has occurred when receiving results from the server,
The specified network name is no longer available, etc.
Our network administrator has looked at the issue and cannot find any network problems.
He setup a continuous ping from the app server to the database server.
Even during the times these errors are occurring, the app server is still able to reach the database server.
However, you cannot ping the app server itself during this time.
Our database administer cannot find any SQL Server issues.
There are no errors in the event viewer or the SQL logs on the database server.
In Central Admin, we can see that one or two jobs fail with SQL errors during the times these errors take place.
It is almost always the “User Profile Service Application – User Profile Language Synchronization Job” and often the “Health Statistics Updating” or “Crawl Log Report for Search Application Search Service Application”.
These jobs run successfully at many other times during the day.
Is there a good way to tell if the database, network or SharePoint itself is the root of these problems?
The database and network guys say there are no problems in their areas, but all I can find in the SharePoint logs is that it can’t reach the database server.
Thank you for any suggestions you may have!

Since these seem to happen at very specific times, I would run a NetMon trace at that window to capture what is going back and forth (or perhaps the timer service is just unable to reach the SQL server).
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Content Database Status Error in SharePoint 2010 Central Administration

Hi,
I am having a new problem with SharePoint 2010 on Windows Server 2008 R2. I have SQL Server 2008 R2 as SharePoint Database on Windows Server 2008 R2. I have total no. of
Seven Content Databases for one Web Application. I found
two of my Content Databases showing Error under the
Database Status column in Manage Content Database section in
Central Administration. Five Content Databases are showing
Started.
Would someone please guide how to resolve it and whats wrong is going on?
Thanks in advance.

What is the output of:
$db = Get-SPContentDatabase <error'ed db name>
$db.Status
And can you set it to Started?
$db = Get-SPContentDatabase <error'ed db name>
$db.Status = "Online"
$db.Update()
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SSMS 2014 to SSRS 2012 WMI connection error / Invalid namespace

We have swapped out the default SSRS2012 Windows Authentication with our own FormsAuth custom authentication.
From SSMS2012, I can connect to our reporting server instance via FormsAuth without issue.
From SSM2014, I can't connect to our reporting server instance. I get this error:
Invalid namespace (Microsoft.SqlServer.Management.UI.RSClient).
How should I troubleshoot / resolve this error?

Hi scott_m,
Based on my understanding, you come across an Invalid namespace error when connecting to Report Server 2012 from SSMS 2014.
In Reporting Services, the namespace for SSRS 2014 is root\Microsoft\SqlServer\ReportServer\RS_<EncodedInstanceName>\v12\Admin
while the namespace for SSRS 2012 is root\Microsoft\SqlServer\ReportServer\RS_<EncodedInstanceName>\v11\Admin. When using SSMS 2014 for connecting to SSRS 2012, by default, it also access v12 instead of v11 , so we will get Invalid
namespace error. In other words, we can’t connect to SSRS 2012 from SSMS 2014 because of different namespace.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

SSRS 2012 Session Expired Error..

We have reporting environment with SSRS 2012 configured with forms authentication…
When users taking reports we are getting following errors randomly. We increased the valued of Query Timeout and Session Timeout in WebConfig. But still the error is persisting…Any one help us to resolve this issue?
microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.;
session!ReportServer_0-9!1070!08/11/2014-03:08:58:: e ERROR: Error in getting session data: Invalid or Expired Session: e3z2csibgn4kmbum1wm2cs2b

Hi Vichu,
According to your description, you encountered the timeout issue when rendering your report. Right?
In Reporting Services, sometimes this issue happens when rendering big report, and it exceed the default Query Timeout time. Generally, we increase the Query Timeout and Session Timeout so that it will have more time to retrieving data.
In this scenario, since you have done this adjustment and the issue still exists randomly. We suggest you optimize the performance of your report. Please refer to the articles below:
Processing large reports:
http://technet.microsoft.com/en-us/library/ms159638.aspx
Performance (Reporting Services):
http://technet.microsoft.com/en-us/library/bb522786.aspx
Improving report performance with caching:
http://technet.microsoft.com/en-us/library/ms155927.aspx
Report performance optimization tips:
http://blogs.msdn.com/b/robertbruckner/archive/2009/01/08/report-performance-optimization-tips-subreports-drilldown.aspx
In addition, we recommend you install the Updates for SSRS 2012:
http://sqlserverbuilds.blogspot.com/
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Using NLB over Application Server in SharePoint 2010?

I have two application server that I need to load balance using Microsoft NLB.
My queries:
1) Just load balancing the Application Server will load balance the SharePoint service as well?
2) How would service application on application server would response to the request that is coming via VIP, what I want ask is where in IIS the physical ips be configured?
3) Once I configure the NLB and have VIP pointing to two physical IPs, how would the Web Server knows that he has to send the request over the VIP(virtual ip) . Where is this configuration done?

In the SharePoint world an 'application server' is a server that does not handle user traffic directly. It doesn't host the websites that users access but instead handles the behind the scenes processing such as searches, PowerPivot etc.
For those servers you do not need to use load balancing, SharePoint handles load balancing internally for those services.
If you want to load balance the web front ends (WFEs) which serve websites to users then this blog covers it quite comprehensively:
http://blogs.technet.com/b/praveenh/archive/2010/12/17/setting-up-load-balancing-on-a-sharepoint-farm-running-on-windows-server-2008.aspx

Creating Secure Store Service Application Error

Hi Experts,
Weird thing's happening in our SP. Everytime we create/delete service application, we always end up with this:
It says that it shouldn't take long but it takes forever on our side.. Do you have any idea about this?
Thanks!
Regards, Glenn

Hi Glenn,
Yes, this is the point. SharePoint Server 2013 requires 8GB RAM at least.
You can have a look at the blog:http://communities.quest.com/community/sharepointforall/experts-blogs/blog/2012/08/31/sharepoint-2013-hardware-requirements--a-consideration-qsharepoint-sp2013
Best Regards,
Eric
Eric Tao
TechNet Community Support

Performancepoint service application error

Hi,
I am new to SharePoint 2013, I have configured the PerformancePoint Service Application. When I tried to create the data source from the PerformancePoint Content section. I am getting the following error.
"Cannot connect to the PerformancePoint, contact the administrator"

This might be problem with PerformancePoint service application association.
Go to Central Administration -> Application Management -> Configure Service application associations.
Associate PerformancePoint Service application with your web application.
Hope this will resolve your problem.
Please mark it answered, if your problem resolved.

Error in sharepoint 2010 designer while saving:"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see the results of the save? "

Hi,
I am doing development in sharepoint 2010 and facing this very weird problem.
If I create a site page with the sharepoint look and feel for that site and try to save the site page,i am getting this error:**"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see
the results of the save? "** and when i say reload,the server removes some parts of my page, e.g onclick event of html,asp buttons.
This error just comes for any sharepoint site page,e.g i took a copy of 'How To Read Library' page just edited the text part of taht page,and when i try to save this error again comes up.
However,if i create a simple aspx page with only htmltags like head body,then thr is no problem ,everything works great. But sharepoint look and feel pages are giving troubles while saving.
has anybody seen this earlier,what could be the reason for this?
Thanks

I think the excerpt and link below is the why, but the page talks about server code and not javascript. I guessing that this is why blank pages work, but not wiki pages. Can anyone verify this?
The following are general rules for using server-side code on a site page.
If the page is uncustomized, server-side code is supported on the page.
If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx

Photoshop Service Application Error

I just installed Premere Elements 9. When I open Organizer in the Premere Elements welcome screen I get the message
Font Capture: Photoshop Service.exe Application Error
The instruction at "0x103e8453" referenced memory at "0x0000a74". The memory could not be "read". Click on OK to terminate the program.
Since I had no other choice I clicked on OK.
In the past I have hade a problem with Elements Organizer - Each time I opened Organizer the region/county box appeared. Now, Organizer no longer requests the region / country when I opened it.
Can any one tell me what all this means and should I be concerned about the Photoshop Service.exe application error?

I'd recommend you contact Adobe Tech Support with this one. It's not a typical issue by any means!

Adobe Acrobat X Pro Error in SharePoint 2010

I have a group of users who are unable to access PDF Files in a
Specific Folder in SharePoint 2010
They are however able to open PDF Files from emails, desktop, other shared folders and
other folders in SharePoint 2010. See the error message below.
Error Message:
There was an error opening this document. File open failed.
Note the users are currently using Adobe Acrobat X PRO. Could this be a permission issue in SharePoint?
Regards,

Hello,
In addition to permission, are you able to open same PDF from other folder or library? Just download PDF file using windows explorer and upload in any library folder and open it.
Since you are able to open other PDF files so i suspect that there is issue with specific file only. You might also try to same file in different browser.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SSRS 2012 service application error in sharepoint 2010

Similar Messages

Maybe you are looking for