SSRS Different Aggregation on Rows and Columns

I have a matrix in Reporting Services that has a matrix that looks like this:
I need to change the aggregation for the Data of matrix so it gets the SUM of Row Groups and the LAST of Column Groups.
Imagine two countries, USA and UK, the total for 2014 should be:
December 2014 for USA + December 2014 for UK
The same way, the total for Q1 2014 should be:
March 2014 for USA + March 2014 for UK
Usually what we get in SSRS for these cases is:
Whole 2014 for USA + Whole 2014 for UK
I basically need the last value for each parent item on Column Groups, summing them on Row Groups.

Hi irusul,
According to your description, you want to sum values for the last month of each quarter and the year, right?
In your scenario, you can specify the total value expression by embedding the IIF() function in the Sum() function. Please refer to the steps below:
1. Design the report like below:
2. Preview the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

How Calculate more than one value and store it into to different rows and column for each input?

thx guys.....i have a progress now in LV
But now i have new trouble here. Ok i attached my LV file (LV 7.0.1/7.1) and excel form. I just could'nt calculate more than one input value. I want a different result for each value that i enter ... and store it into different rows and column. But it just store at one row.
Attachments:
My Project.vi ‏31 KB
rumus motor bakar.xls ‏14 KB

duplicate post

SSRS Report Freezing row and column while scrolling Issue

Hello,
I have created the report and i have freezed the row and column of the report while scrolling [To Freeze made the changes in tabulex property of the table "Keep Header visible while scrolling"]
meade the changes in the property [Advaned Mode]
Fixed Data= true
Keep Together=true
Keep with group =After
Report on new page=true
When ever i will scroll down my report my all column headder will remains same. after that if i scroll to right my first freeded column headder will not display [group column or freezed row headder].
COuld you please suggest me for the same issue.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Sum calculated rows and columns

I have written a SQL report to count the number of offenses by levels of disciplinary actions. Now I want to total
the counts for the rows and columns. How do I do this? Below is my code. It produces column headings with counts. Ie.
Offense Description   Level I Level II Susps Terms
2 Minor Violations      0         1
0    0
SELECT
UPPER(DESCRIPTION) as OFFENSE,
SUM(CASE
WHEN OUTCOME = 'LEVEL I'
THEN 1
ELSE 0
END) as LEVELI,
SUM(CASE
WHEN OUTCOME = 'LEVEL II'
THEN 1
ELSE 0
END) as LEVELII,
SUM(CASE
WHEN OUTCOME = 'SUSPEND'
THEN 1
ELSE 0
END) as SUSPEND,
SUM(CASE
WHEN OUTCOME = 'TERM'
THEN 1
ELSE 0
END) as TERM
FROM
PAGRDI
Where
R_DATE >= '2014-01-01' and R_DATE <= '2014-01-31'
Group by
DESCRIPTION
Order by
OFFENSE

Hi Wildcatgirl,
According to your description, you have used T-SQL to get the counts for different OUTCOME. Now you want to get the total for each OFFENSE and OUTCOME. Right?
In this scenario, since you have already get those counts with T-SQL query, so in your dataset it will have data fields below: OFFENSE, LevelI, LevelII, SUSPEND, TERM. We just need to drag these data fields into a table, add a column at the end of the table
and use expression to sum the counts for different OUTCOME. Then we can add a total for the detail row. We have tested this scenario in our local environment. Here are screenshots for your reference:
Reference:
Tables (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

Table name input. and output i need all rows and columns using procedures

hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To All

An example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

Row and Column detection of a 2D boolean array

I use an array as showed by my example (LB8.2).
Press a 1 or 0 in the array changes it's value and it gives
back the Row and Column (that was changed).
I use this to program a 22 channel patterngenerator (GPIB).
It sends only the column (channel of patterngenerator) patterns, so that makes it faster.
Has someone an idea if this row and column detection can be made simpler (faster)?
Kind regards, Bernard
Attachments:
MyRowColDetection.vi ‏30 KB

Here is a different way
Tim
Johnson Controls
Holland Michigan
Attachments:
MyRowColDetection Rev TLE.vi ‏15 KB

Report Writer Row and Column Format

Hi
Was wondering if there is a possible solution to this :-
Understand that column format is controlled by format groups. This means that all figures in the same column will take the same format (such as scaling and decimal place).
Scenario is ->
                    Colunn #1 -> column set as displaying no decimal point
Rev                  120
OP                      5
OP margin %     4.2 -> how to set this to 1 decimal point. Any formula syntax that I can use?
Regards.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Help! Inserting a 1-D comment array into a 2-D string array at specified row AND column

Hello everyone,
I am writing a 2-D string array to excel and i need a way to add comments to my file like this:
SLAM NAME G Level Comments
1 RALF 26
1 RALF 26
1 RALF 26
1 RALF 26
For some reason, i cannot specify a row AND column to write because:
When i use replace array subset it only replaces 1 element at my index.
When i use replace array subset with a loop, it creates empty spaces until it reaches the end of the array it is replacing.
When i use Insert into array: i cannot wire 2 inputs for row and column.
In my complete VI i will need to write from row 1-1001, a different comment from 2-2002, a different comment from 3-3003, etc until a stop condition is met so i need to figure out how to do this programatically and not have it replace any elements outside of the range or it will override previous commetns.
I am at a loss of what to do. Any and all suggestions are greatly appreciated.
Thanks!
Solved!
Go to Solution.
Attachments:
array.vi ‏13 KB

Hi proph,
I made a small subtile change to yur VI and now it replaces all values of the 4th column…
THINK DATAFLOW!
Use shift registers when you need to propagate values from one loop iteration to the next!
USE/LEARN DEBUGGING TECHNIQUES!
There are tools like probes and highlight to understand your VI execution and to find problems…
Go through all those free online courses offered by NI!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
array.vit ‏12 KB

Sumproduct row and column?

hello --
it seems fairly straight forward to use sumproduct for two columns or two rows of a given length. how can i do the same for a row and a column of the same length. i keep getting an error when i do that. do i need to use a different function to get the desired result? basically what i am trying to do it:
sumproduct((A1:A5),(C1:C5))
thank you in advance for your help.

The arguments to the sumproduct() function require the same dimensions. I think this mean the same number of rows and columns. Therefore a range from A1 to A5 is 5 rows , 1 column, whereas a range from C1 thru C5 is 1 row and 5 columns.
I suggestion something like this to make the range in the C1 thru C5 reside in B1 thru B5:
Now you can perform the sum product on column A and B.
B1=OFFSET($C$1, 0, ROW()−1)
this is shorthand for select cell B1, then type (or copy and paste from here) the formula:
=OFFSET($C$1, 0, ROW()−1)
select cell B1, copy,
select cells B1 thru B5, paste
For this example:
D3=SUMPRODUCT(A, B)

Localization of CrossTab row and column label Crystal Report RPT file

Dear all,
Does anyone know how to support multiple locale texts (English and French) in CrossTab Row and Column Header labels and grand total labels? Is there a way to parameterize text objects CrossTab in one single Crystal Report RPT file to use some sort of locale resource file containing text string for different languages based on the users of RPT at runtime? The idea is to use one single RPT file to generate report for different locale text for CrossTab Row and Column abels and grand total labels instead of creating RPT files per locale?

Hi,
Does the database have a column that identifies the language? If it does, then you could create two separate cross-tabs and place them in different sections and conditionally suppress the section depending on the language from the database.
That's the only thing that can be done in my opinion.
-Abhilash

Maximum number of rows and columns in data form

Hi,
I wanted to know if there is a limitation to the number of rows and columns that can be displayed in a data form, in Hyperion planning 11.1.2.1 ?
And what would be the most appropriate number of rows and columns to be included for optimum performance.
Thanks.

Hi,
While its a fun fact to determine how much one can stuff into a web form, the reality is: how much can a user reasonably consume in a web form?
And what would be the most appropriate number of rows and columns to be included for optimum performance
You will find that the answer to this is by "what design makes a web form most usable?" And no, the users don't really know what they want from a design perspective, they see it in their head, but usually what they ask for is something that would look entirely different (huge).
The next thing to think about is the use of member selection functions in the page axis. IDescendants(Entity) in a dropdown could cause issues just as easily as too many rows - and again make the drop down unusable for a user.
If your question is a bit more technical, then consider this (somewhat oversimplified): Web forms are constructed by a process on the server. Objects are created based on the form's definition and used by the process that builds the form. The process uses Cartesian looping (lots of iterations) to construct the form cell by cell, starting at the top left and finishing up in the bottom right. If the form has a million cells on it, then the loop and all the code within it runs a million times. The capability of the server has a lot to do with how well it can handle this request, and how many it can handle at one time.
The result of this is gobs of HTML and JavaScript. All of this has to be sent over a network to the requesting client. The client starts receiving the web page code and has to render it in the browser and run the JavaScript. The ability to do this is limited by the browser, the OS, and the hardware that the client is running on.
And that's just rendering the page for use.
Now it has to be interacted with on the client machine, and changes parsed, packaged, and sent back to the server.
So the technical answer is, there can be many limitations to how many rows and columns a data form can have - none of which can truly be anticipated by anyone. This is why I put the part about usability first in this post.
Regards,
Robb Salzmann

Multiple Rows and Columns selection on ALV

Hi all,
What is the best solution to allow the multiple selection or combination of selection (rows and columns) on an ALV ?
I would like to be able to select some rows and some columns and to get the result cells in order to update them.
Thanks in advance for your help.
David

Thanks Srinivas and Seela,
I forgot to precise that my ALV is dynamic, I used the method 'add_new_child_node'.
I tried the different possibilties with method attributes but I don't find the good attributes combination to allow columns selection.
I add also that I have to be able to select several no adjacent columns.
What do you think about this workaround :
Is it possible to add a line on my ALV with checkbox between the header line (with column title) and data line.
I will search using the method add_cell_variant but I don't know if it's possible with dynamic ALV.
Thanks.
David

How to layout constraint rows and columns "right"?

Hi.
I have a complex constraint layout with 8 columns and 11 rows. Since this layout is not an MXML-file, I need to do it in actionscript. Is there a "best pratice" on how to layout this without the Design view in Flash Builder?
Is it possible to display the columns and rows like in HTML, where I could say "border=1" or use css?
Regards,
Jo

What makes you think that it is not there? Any form which doesn't have the same set of members across rows and dimensions are asymmetric.
Asymmetric rows and columns contain different sets of members selected across the same dimensions
Oracle Hyperion Planning, Fusion Edition Administrator's Guide
I can add a column with only Q1 and then another column with Q2, Q3, Q4 which will make it an asymmetric form. Keep in mind not to check "Place selection in separate columns".
Regards
Celvin
http://www.orahyplabs.com

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

SSRS Different Aggregation on Rows and Columns

Similar Messages

Maybe you are looking for