SSRS- Drill down to sub report of a bar chart on click on a particular color of the bar

Hi,
I have a bar chart which can have many colors on each bar, Now if i click on a bar, i am getting all the data related to that particular bar. Is it possible to click only on a particular color and get related data instead of whole bar?
To be more precise, in the below image if i click on 16/6/2013 bar, i am getting all the data related to the bar, but is it possible to click on red and green colors of the bar separately and get the relevant data? Any help is greatly appreciated.
Kruthi Hegde

Hi Kruthi,
In your case, you can use “Go to report” property to solve the issue.
Suppose we have a dataset (DataSet1) in main report and subreport with following fields: Months, DateTime, Amount. We can according to Months and DateTime fields to display the subreport. Please refer to the steps below:
Subrepot:
Add dataset (DataSet2) in the report with Months field.
Add dataset (DataSet3) in the report with DateTime field.
Add two parameters in the report. Please refer to the following Available Values:
Months:
Dataset: DataSet2
Value field: Months
Label field: Months
DateTime:
Dataset: DataSet2
Value field: DateTime
Label field: DateTime
Add filters in the tablix.
Main report:
Right click the bar chart, select Series Properties.
Click Action in the left pane, select “Go to report” option.
Specify the corresponding report.
Click Add icon to add parameters to run the report:
Name: Months Value: [Months]
Name: DateTime Value: [DateTime]
(Note: If we want subreport display these data which is only relevant with color, we can delete DataTime parameter in the report.)
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Similar Messages

Drill down to detail reports from a Pie Chart

Is it possible to code for drill downs in a Pie Chart to a detail report based on the section that is clicked in an RTF template?
Can anyone provide an example for this?

Hi Raja,
I used CEO LOG ON TOKEN to avoid asking for credentials when im trying to access the dash doard form another dashboard.
From connections we can have flash variable
Note : Names are case sensitive here in flash variable so name it as shown below
Define its name as CELogonToken
Variable Format as CSV
Variable data -->under ranges define a range :
Name it as CELogonToken
Range :map to a excel cell (Ex Sheet1!A$2)
From info view you can find DOC ID suppose your DOC ID is 9609
Then frame your URL AS
http://sapdev:8080/Xcelsius/opendoc/documentDownload?iDocID=9609&sKind=Flash&CELogonToken=
in another cell Concatenate the above your with your Logon token captured in Sheet1!A$2
suppose your url is in 'Sheet 1'!A$6
then your formula cell for concatenation should be 'Sheet 1'!A$6 & Sheet1!A$2
Use a url component and map the concatenated url cell to the component and place it over your pie chart.
uncheck show button background
try this and apply according to your scenario.
Hope this works..
@Sri

Drill down into a report

Hi!
I've been working on a report to be able to drill down into another "detailed" one, and I was able to do it but not exactly the way i needed.
I created an action link for the column values, but my problem is that for EVERY value, i always drill into the same exact report, and my idea is to drill into the same report for all of them, but with different parameters for each one
Example:
Sales representative revenue
John 230K
Mark 100K
Martin 500K
I've set a drill down for the revenue column, but all 3 values are obviously drilling into the same exact report, and I want to set it in a way I can tell the sub report "give me the detail report but only for the corresponding sales representative"
If i click on 230K, I want to see the "detailed report" only for John's oppties. If i click on 500K, I want to see the "detailed report" only for Martin's oppties. And so on...
That's the whole deal. I don't know how to do that.
Thanks for your help,
Martin

Hi, thanks for your answer
I'm navigating from a master to a detailed report, and i have already set the attribute as "is prompted" but Its not enough. Let me try to explain why
Lets say I have this example report:
Prompts: Primary position
Table:
Primary position | forecast
John | 768687
Paul | 200000
George | 923882
then I drill down on "Paul" to the next position level, so the report changes to something like this:
Primary position | secondary position | forecast
Paul | Jane | 100000
Paul | Martin | 100000
So, now... I want to drill into Martin's 100.000 forecast (drill into a detailed report) and despite I have the primary position set as "is prompted", I have no prompts for second, third, or n-position... So If I drill down from martin's 100000 forecast, I will only be able to pass the primary to the detailed report, and It will only be able to show Paul's 200000 forecast details
I want the detailed report to pull Paul for primary, Martin for secondary, and show only the detailed report for that 100000 forecast value
That's the issue
I hope I was clear enough
Thanks,
Martin

Drill Down for Map reports

Hi All,
I have a requirement in which i need a create a sales map report across all the states in NA.
i have created a main map report using the default map gallery and displayed all the sales figures across all the states in NA. Now i want to show the City level sales when i click on a particular state. The state on which i am going to click
should enlarge (or) it should redirect to other report having the particular statemap with city related values on it.
How can i do it please help..!
Do i need to download all the local statemaps and how do i store those maps in SQL server DB. Please explain in detail.
Thnaks in Advance..!
Regards,
Balaji Prasad B
Balaji - BI Developer

Hi Balaji Prasad,
According to your description, you create a state level map. When clicking on a particular state on the map, you want to display corresponding city level map.
In this scenario, we should import state and city level shapefiles into the database, then create maps with these spatial data. After that, we should click on the state map and select Polygon Properties to create a drill down report and specify state as
parameter to run the city map. For detail information, please refer to this article:
Drill down in SSRS Map Reports.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Not able to drill down S_ALR_87013558 in reports

Hello Experts,
I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
What could be the reason.?
Please suggest.
Thanks,
Kumar Srinivasan

Hi Kumar,
Follow below steps in sequence.
1. Please execute CJE2.
2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
4. Save it.
Check your report again and you will have an option there.
Regards,
Amit

How to setup the drill down on union report

Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.

Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish

HOW TO ADD DRILL DOWN IN A REPORT

hi
well i want to add drill down in my report....
im unable to find it ....
can you please help me to make a drill down in my report.
thnx and regards
UMAR NAYAB.

hey thnx toronto..
im able to make drill in my report....
now my chart is not changing its data according to drill.....
like my bar chart should also change with the data drilled down....
please help regarding this....
regards.

Drill down in XL Reporter

Hi
Can we have drill down in XL Reporter -Report Organizer
Regards
Farheen

Hi Rekha,
We can user drill down in XL reporter composer and excel . IN rerport composer when you drag a field to the selection criteria then you can drill down by transaction level.
But Report organiser is where all the reports are saved and give a look and feel like windows explorer.
What is your requirement. Post reporting related queries in the reporting forum
[Reporting and Printing;
Regards,
Rakesh N

PIE Chart Drill down in bex report

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

Drill down in webi report

Hi,
Is there any way to display the drill down in webi report. For example:
YearQuarterMonth--Week.......
if the drill the Year option I can able to see all Quarter level measures and if I drill down further I can get into Month level measures and Week level and so on .
But my question is When I drill the Year to Quarter...I want it to display both Year and Quarter and If I drill down further
I want all the measures related to Year ,Quarter, Month and so on
Basically want I need is a tree level hierarchy......Could any one plz help me what all changes I need to make in order to get a detailed report.
Thanks
Sushma
Edited by: Sushma Reddy on Feb 9, 2010 9:44 PM

Hi,
Try to create a Class e.g Time in universe and objects to that class as year, quarter,month as
Year Object -> data type -> D/N
select To_date('sysdate','YYYY) as year from dual
Month object-> data type -> D/N
select to_date)'sysdate','MM') as month from dual;
Quarter -> data type -> D/N
case when @select(Time/Month) in (1,2,3) then q1
         when @select(Time/Month) in (4,5,6) then q2
          when @select(Time/Month) in (7,8,9) then q4
           when @select(Time/Month) in (10,11,12) then q4
endcase
Then create a hierarch in tools -> hiearchy ->custom hierarchy and add the above class there then in any report (Deski/WebI)
you will get the above hierarchy and use it according to your requirement.
Cheers,
Suresh Aluri.

Drill-down into AWR reports

Hi experts,
any can help me in this topic Drill-down into AWR reports.

A typical AWR report - produced in html format- includes its main categories(for example Top 5 timed events) hyperlinked. By clicking on each one , you can navigate to a thorough analysis of all db parameters regarding it......
Anyway....Can you more specific of what exactly do you want...?????
Greetings...
Sim

Issue to drill down from a report

Hi,
Our requirement is we need to show three different graphs in a single report representing different data, from that we need to drill down to a new different report ;
Two approaches we tried with crystal report are;
1. We put three graphs and the table in the single report and tried to implement drill down for each graph. We could group data on the basis of first pie chart data and could drill down. But while we tried to group data for second bar chart grouping is happening only as a sub group of first group. Ie, we cannot group data independently for different charts.
2. In the second approach we created different 3 sub reports and added in to a main report. But Crystal report is not supporting sub report to a sub report. Ie, we cannot go to drill down report.
It would be a great help, if you could suggest some solution.
Thanks,
Jomy

Hi,
As per my understanding, you have one report say Parent1 (SA1) and one Report say Child1 (SA2), now you want to pass some values from parent1 to child1.
1> Create 1 interim report from parent1.
2> In your Child report in filter part use result based on another analysis.
Please let me know if it resolves yourissues.
Thanks
Anirban

How to drill down from summary report to detail report using RRI?

Dear all:
A problem about RRI. Please help me!
1.I create a BEx query 'Q1' to show summary data.
2.I create a BEx query 'Q2' to show detail data.
3.In Q1, all the products are shown each row.
       The 1st coulmn is 'Balance in the begin', it shows how many customer claim cases are opened before this week.
       The 2nd coulmn is 'New', it shows how many customer claim cases are initalized in this week.
       The 3rd coulmn is 'Close', it shows how many customer claim cases are closed in this week.
       The 4th coulmn is 'Balance', it shows how many customer claim cases are still opened now. And this column is calculated by this fomula as follow:
         'Balance in the begin' + 'New' - 'Close'
   4.In Q2, it lists each customer claim case. Include ClaimNo, Sold-To Party, ProductNo...
   5. I set Q1 as sender, Q2 as receiver.
   6. If I focus on the value of 'New' or 'Close' and then go to 'Q2', the correspond detail calim information in 'Q2'. But it is fail if I focus on the value 'Balance'.
   Why?
Thanks,
Jolin

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

How to drill down another one report on one field value of one row

Hi,
I have two reports that can link together on one field of respective database query command. The effect i want to reach is that when user clicks this field value on some row of one report, which i call source object, another report, target object, would use this value as input parameter and the page would jump to this linked report. I can see Format Editor provides Hyperlink feature when one field is edited, but i don't know how to associate another report as what i described here.
What if one the following conditions is met:
1.one of two objects, source object, is one chart object
2.target object is one chart object
3.two objects are both chart objects
Note: two objects is separately from different reports.
Additionally, is it possible to code for hyperlink functionality under both .NET WinForm and WebForm? what if under RDC?
Thank you
Zhi
Edited by: zhi li on Sep 24, 2008 11:53 AM
Edited by: zhi li on Sep 24, 2008 11:57 AM
Edited by: zhi li on Sep 24, 2008 11:58 AM

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

SSRS- Drill down to sub report of a bar chart on click on a particular color of the bar

Similar Messages

Maybe you are looking for