SSRS how to get for number of months

Hi All;
below is my SSRS expression
=Cdate(Format(Cdate(Mid(Fields!createdon.Value,4,2) & "/" & Mid(Fields!createdon.Value,1,2) & "/" & Mid(Fields!createdon.Value,7,4)),"MMMM yyyy"))
which gives me the month in MMMM yyyy format in Jan 2014, Feb 2014, Mar 2014... so on
i need to remove a average of a month
i.e Months value/No of months
I do i get number of months dynamically in SSRS
Any help much appreciated
Thanks
Pradnya07

Hi Pradnya07,
In your scenario, it seems that the createdon is a string data type field with this format: 15/09/2014.
If we want to get the number of the month in the createdon field, we can directly use the expression below:
=cint(Mid(Fields!createdon.Value,4,2))
If you also need to get the average data for a month like ‘Months value/No of months’, please refer to the following expression:
= Fields!Amount.Value /cint(Mid(Fields!createdon.Value,4,2))
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

How To get the number of request's for a single Composite Application

Hi can any body tell how to get the number requst's for a single composite application.
Thanks
Mani

Hi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay

How to get online Number for India ?

Spoiler (Highlight to read)
How to get online Number for India ?
Spoiler (Highlight to read)

Hello,
Skype does not offer Online Numbers in this country.
For more info regarding Online Numbers please visit: https://support.skype.com/en/faq/FA269
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

How to get total number of days

Hi All,
how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
and how to get total number of days in a month.
Thank You,,
Sriii..

Hi Sridhar,
Pls Try to search before posting general questions.
Try this,
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = p_lv_date1
      i_datum_von                   = p_lv_date2
   IMPORTING
     e_tage                        = p_e_date_difference
   EXCEPTIONS
     days_method_not_defined       = 1
     OTHERS                        = 2
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Sunil kairam.

How to get row number of selected entry from OVS search result

Hi,
Anyone having any idea on how to get row number of the selected entry/ how to differentiate rows in OVS search result in ON_OVS method?
Regards,
Jatin

Hi,
You can get the selected record to <ls_selection> structure in co phase 3.
From that structure you can get what ever field you want.,
check the below code for reference,
<< Moderator message - Cut and paste response from F4 help for ALV table field removed. Plagiarism is not allowed in SCN >>
hope this helps u.,
Thanks & Regards,
Kiran
Edited by: Rob Burbank on Jan 5, 2012 5:24 PM

How to get the number of messages consumed by a MDB ??

Hi all,
How to get the number of messages consumed by a MDB displayed in OEM in a Java Application ???
DMS ??? what use DMS ???
tanks

ok.
Well using DMS is one way to get at these sorts of stats in a programmatic manner.
There's a Java API you can use, or you could call out to the Spy servlet to query the DMS stats in either text or XML form.
I don't have an MDB published so I can't show you specifiically, but here's the sort of query you can use to extract the data.
http://localhost:8888/dms0/Spy?format=raw&table=oc4j_ejb_stateless_bean&recurse=children
Which produces a table of the TEXT form:
<DMSDUMP version='9.0.4' timestamp='1163456821185 (Tue Nov 14 08:57:01 CST 2006)' id='8888' name='OC4J'>
<statistics>
/oc4j [type=n/a]
/oc4j/default [type=oc4j_ear]
/oc4j/default/EJBs [type=oc4j_ejb]
/oc4j/default/EJBs/jmsrouter_ejb [type=oc4j_ejb_pkg]
/oc4j/default/EJBs/jmsrouter_ejb/AdminMgrBean [type=oc4j_ejb_stateless_bean]
pooled.count: 11 ops
pooled.maxValue: 1 count
pooled.minValue: 0 count
pooled.value: 0 count
ready.count: 11 ops
ready.maxValue: 1 count
ready.minValue: 0 count
ready.value: 0 count
session-type.value: Stateless
transaction-type.value: Bean
/oc4j/default/EJBs/jmsrouter_ejb/EnqueuerBean [type=oc4j_ejb_stateless_bean]
pooled.count: 11 ops
pooled.maxValue: 0 count
pooled.minValue: 0 count
pooled.value: 0 count
ready.count: 11 ops
ready.maxValue: 0 count
ready.minValue: 0 count
ready.value: 0 count
session-type.value: Stateless
transaction-type.value: Bean
/oc4j/default/EJBs/jmsrouter_ejb/TimerHandlerBean [type=oc4j_ejb_stateless_bean]
pooled.count: 11 ops
pooled.maxValue: 0 count
pooled.minValue: 0 count
pooled.value: 0 count
ready.count: 11 ops
ready.maxValue: 0 count
ready.minValue: 0 count
ready.value: 0 count
session-type.value: Stateless
transaction-type.value: Bean
</statistics>
</DMSDUMP>
Or produces an XML document of the form:
http://localhost:8888/dms0/Spy?format=xml&table=oc4j_ejb_stateless_bean&recurse=children
You can use the Spy console to find the table that contains the details for MDB and then take it from there.
This is not what you specifically want to do, but it does provide a good overview of how DMS is used.
http://www.oracle.com/technology/pub/notes/technote_dms.html
-steve-

How to get the number of bytes at TCP port

Hi all,
How to get the number of bytes to read at the TCp port...as someone had suggested in some forum we do read the number of bytes first and then pass this...
but we get a problem when we have FF data in this...because then it sends 2 FF data...and cause of this we skip the last data...is there any solution for the same?

Hi
In LabVIEW you don't have the same property as in serail port.
You havn't "Byte at TCPIP port".
if you developp a protocol, one soltion, is to send the size to read.
Ingénieur d'Application / Développeur LabVIEW Certifié (CLD)
Application Engineer / LabVIEW Certified Developer (CLD)

How to get week number from date

Hi,
please mention how to get the number of week from a particular date using fn module?

Hi Debarshi,
Use FM DATE_GET_WEEK
Reward points if helpful.
Regards,
Hemant

Indesign CS3: How to get the number of the current layer?

Hallo!
How to get the number of the current layer in a page?
Thanks,
Alois Blaimer

InterfacePtr<ILayerList> layerList(documentUIDRef, UseDefaultIID()); int32 layerCount = layerList->GetCount(); To findout layer name use IDocumentLayer* documentLayer = layerList->QueryLayer(layerIndex); PMString layer=documentLayer->GetName();

How to get physical number of selected row on the screen.

Hi,
We have block defined with Numbers of Records Displayed = 3. In the same time the data set contains 10 records. We would like to know how to get a number of row selected on the screen. i.e. in our case that the number will be always between 1 and 3 independent of the current row position in the data set.
Best regards,
Constantin.

You can calculate that number by subtracting :SYSTEM.CURSOR_RECORD and GET_BLOCK_PROPERTY('BLOCK', TOPMOST_RECORD)

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

How to get paragraph number of selected text in ID CS4

Hi,
Can anybody help me how to get paragraph number of selected text in Indesign cs4.
Thanks,
Gopal

Ah, I see -- thanks. Turns out that there's no difference in speed between texts.itemByRange(), characters.itemByRange(),and insertionPoints.itemByRange(). In a document with 170 pages of text, and with the cursor in the last paragraph, the second and third lines, below (and your function), give exactly the same result:
t = app.selection[0];
t.parentStory.texts.itemByRange (t.parentStory.insertionPoints[0], t).paragraphs.length;
t.parentStory.characters.itemByRange (t.parentStory.characters[0], t).paragraphs.length;
Peter

How to get the number of files currently open?

hi,
does any one know how to get the number of files currently open in windows OS?
e.g. lets say .txt files...
any comment will be really appreciated.
thanks

Assuming that you don't want to actually do this from within Java code (which would obviously require native code), here's a utility that will give you a list of which file handles are opened by which processes (on Windows):
http://www.sysinternals.com/ntw2k/freeware/handle.shtml
- K

How to get the number of elements in DB

Could you tell me how to get the number of elements in DB??
My code to get the number is below, but I think it is not efficient
DB->cursor(DB, NULL, &cursorp, 0);
while ((ret = cursorp->c_get(cursorp, &key, &data, DB_NEXT)) == 0)
count++;
--------------------------------------------------------------------------------------------------------------

Hi,
The most efficient way to get a count from the database is using the DB->stat API (http://docs.oracle.com/cd/E17076_02/html/api_reference/C/dbstat.html)
The code will be something like:
        DB *dbp;
        DB_BTREE_STAT *statp;
        int ret;
        /* Print out the number of records in the database. */
        if ((ret = dbp->stat(dbp, NULL, &statp, 0)) != 0) {
                dbp->err(dbp, ret, "DB->stat");
                goto err1;
        printf("%s: database contains %lu records\n",
            progname, (u_long)statp->bt_ndata);
        free(statp);The code comes from the example included in the distribution at examples/c/ex_btrec.c
If the database isn't a btree, you should update to the appropriate statistics structure and field.
It's worth noting that retrieving the count is never a "cheap" operation. The count is not stored in the database - since doing so introduced a single point of contention that creates a bottle neck.
Regards,
Alex Gorrod
Oracle Berkeley DB

SSRS how to get for number of months

Similar Messages

Maybe you are looking for