SSRS How to pass subtotal value in matrix into another table just for display?

Hi all,
I have two matrix with subtotal for two grouping. I need to pass the value of this two group subtotal into another matrix table to display and perform simple calculation to get the differences.
How can I pass the subtotal amount into the other matrix?
In Crystal report I can define two variable where i can set the total to the value and call the two variable anywhere in the same report. But how can I do it in SSRS?
Appreciate can help
Thank you

Yes, basically both are same grouping, i just want to capture the subtotal for comparision with scenario 2.
I can do it in SQL, but if possible, I hope to do it in report. Thank you
Simulation as below
Matrix for scenario 1
Group 1
Detail
Detail
Subtotal Group 1
9999
group 2
Detail
Detail
SubTotal Group 2
8888
Matrix for scenario 2
Group 1
Scenario2
Scenario 1
Differences
Detail
Detail
Subtotal Group 1
2000
9999
2000-9999
group 2
Detail
Detail
SubTotal Group 2
3000
8888
3000-8888

Similar Messages

How to calculate some value that referring to another table

Hi...
Need help asap
The questions are :
Q1 : In Microsoft Excell, we can take value from one cell and use it to another cell.
How about in BO, if we want to take value (ex. 93.75) from the other table and use or refer the value that we want to to another table (just use the value from another table)
Just for information, we want to use the number (93.75) in another function. (if <93.75, then........) and the value (93.75) is a result from another function or calculation.
Q2 : How to SUM from one table and show the result to another table.(We want to use the result of SUM for another calculation in different table.)
Thanks for your kind help.

Eva,
In answer to your question about using a cell from report (block) as a value to be manipulated within another block, will be tricky unless you can employ the "Merge Dimensions" technique. Working in the blind and trying to visualize what you are trying to do is very difficult, so to speak in general terms, you will have to determine a best way to merge dimensions, then build specific local variables to "flag" and extract succinct values from one data provider, and then use that local variable in applying it to the other block. This will take some experimentation and testing before you can feel confident and get the hang of it.
On the other hand, if you know what the threshold value is that you want to apply (like for instance 91.75), then you can either "hardcode" that in your formula(s), or build a prompt in your report that captures this tidbit from the user when the report runs, and using the UserResponse function you should be able to calculate what it is you want to do.
Good luck and post more details (specific tables, columns, and manipulations) and perhaps some one can post a suggestion on how to best execute your report.
Thanks,
John

How could I insert the deleted row into another table within a trigger?

Hi,
How could I insert the deleted row into another table within a trigger? The destination table has the same columns as the source table. Since the statements are in the trigger, it is not allowed to query the source table named 'test'. Thanks! The trigger is as follows, uncompleted:
CREATE TRIGGER delete_trigger
AFTER DELETE
ON test
FOR EACH ROW
BEGIN
-- How could I insert the deleted row into another table
END delete_trigger;
Message was edited by:
user569548

Hi,
I'm not sure what's wrong there.
I read the oracle docs about ANALYZE and ALL_TAB_COLUMNS, and did the following:
ANALYZE TABLE my_tab VALIDATE STRUCTURE; //went ok.
SELECT column_name
FROM all_tab_columns
WHERE table_name = 'my_tab'; //but no rows selected?
This topic might not be what this thread should be about. Here I posted a new thread:
How to get colum names of the newly created table?
Thanks.
Message was edited by:
user569548

SSRS How to pass a value for Hidden parameter ?

Hello,
I have a SSRS report deployed on the Report server. This report is having an "Hidden" parameter.
Could someone please guide me, how to pass the value to this internal parameter in each of the following case -
1. Report is accessed through a Desktop application/Web application in Report Viewer.
2. Report is accessed through the Url.
3. Report is accessed through the Report Manager.
Any quick help on this is highly appreciated.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hi Vinay Pugalia,
Internal Parameters in SSRS are parameters that are not configurable by the end-user at run-time and values cannot be passed to this type of parameter (when present in the child report) in case of a drill-through report implementation. This
type of parameter is read-only and not accessible in parent report.
This varies from a Hidden Parameter, which the user is not prompted to provide, but can still be configured through the URL to the report server.
So no matter you access the report through report manager, URL or Report Viewer. The passing value to the internal parameter will not work.
As you have mentioned that I will also suggest you use the hidden parameter instead.
More details information in this blog for your reference:
SSRS – Understanding Report Parameter Visibility
How to pass value to hide parameter is the same as that of the visible parameter, similar thread for your reference:
Passing the value in action property of a text box
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

SSIS-How to pass multiple value to stored procedure from table row one by one using ssis package??

I want to execute a stored procedure using ssis.But the problem I am having is that there is a table with 200 rows with only
single column.Now i want to execute stored procedure using value one by one from table .once the stored procedure is executed with top value from table i also want to delete that topmost column value and execute with next table value.and store the result in
text file.
please help me..or provide a package.

If you want to do it in SSIS, a way to do this is by using For Each Loop as mentioned above.
Create 1 OBJECT type variable (list of values) and one STRING type variable (one value at a time)
Use EXE SQL Task with ResultSet = FULL RESULT SET and query = SELECT COL FROM TABLE ORDER BY COL ASC...output this to the OBJECT type variable
Next, a For Each loop container with Foreach ADO Enumerator, ADO object source variable = Object type variable and map that to String type variable with index = 0.
Within your for each loop container, select another EXEC SQL Task and pass in an input parameter (the String type variable) and query = EXEC PROC ? -- WHERE ? = String type variable.
This will execute your store procedure just for that one value out of the whole list.
Now within the same For Each loop, select another EXEC SQL Task and again pass in an input parameter (the same String type variable) and query = DELETE FROM TABLE WHERE COL = ? -- WHERE ? = the current value
The above process should A) get the list of values from the table B) pick one value at a time and execute the proc and delete and right after delete that value from the table.
Hope this helps.
-- some further investigation/tweaking may require but it should help you get started.

How to pass the value of variable to another java file?

Hi. I have 2 java files (LogonAction.java and PCAction.java). The value of variable(String getrole) depends on the logon user. How can I use this value of variable in PCAction.java? I want to execute a sql statement in PCAction.java which is (String sql="Select * from PP where role"+"='" + getrole + "'") Thanks a lot.
LogonAction.java is below:
package test;
import test.jdbc.util.ConnectionPool;
import java.sql.*
import java.util.*;
import javax.servlet.http.*;
import org.apache.commons.logging.*;
import org.apache.struts.action.*;
import org.apache.struts.util.*;
import org.apache.commons.beanutils.PropertyUtils;
public final class LogonAction extends Action {
private Log log = LogFactory.getLog("org.apache.struts.webapp.Example");
private ConnectionPool pool;
public LogonAction() {
pool = ConnectionPool.getInstance();
public String getrole;
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception {
Locale locale = getLocale(request);
MessageResources messages = getResources(request);
ActionErrors errors = new ActionErrors();
String username = (String)PropertyUtils.getSimpleProperty(form, "username");
String password = (String)PropertyUtils.getSimpleProperty(form, "password");
String getusername=CheckUser(username,password);
getrole=getusername;
java.lang.System.out.println(getrole);
if ("".equals(getusername))
errors.add(ActionErrors.GLOBAL_ERROR,
new ActionError("error.password.mismatch"));
getusername=username+getusername;
// Report any errors we have discovered back to the original form
if (!errors.isEmpty()) {
saveErrors(request, errors);
return (mapping.getInputForward());
// Save our logged-in user in the session
HttpSession session = request.getSession();
session.setAttribute(Constants.USER_KEY, getusername);
if (log.isDebugEnabled()) {
log.debug("LogonAction: User '" + username +
"' logged on in session " + session.getId());
// Remove the obsolete form bean
if (mapping.getAttribute() != null) {
if ("request".equals(mapping.getScope()))
request.removeAttribute(mapping.getAttribute());
else
session.removeAttribute(mapping.getAttribute());
// Forward control to the specified success URI
return (mapping.findForward("success"));
* Look up the user, throwing an exception to simulate business logic
* rule exceptions.
* @param database Database in which to look up the user
* @param username Username specified on the logon form
* @exception ModuleException if a business logic rule is violated
public String CheckUser(String username,String password){
Connection con = null;
try
con = pool.getConnection();
String sql = "SELECT * from user WHERE userid = ? AND password= ?";
PreparedStatement ps = null;
ResultSet rs = null;
try {
if (con.isClosed()) {
throw new IllegalStateException("error.con.isClosed");
ps = con.prepareStatement(sql);
ps.setString(1,username);
ps.setString(2,password);
rs = ps.executeQuery();
String returnstr="";
while(rs.next())
returnstr=rs.getString("role");
java.lang.System.out.println(returnstr);
return returnstr;
} catch (SQLException e) {
e.printStackTrace();
throw new RuntimeException("error.ps.executeQuery");
} finally {
try {
if (ps != null)
ps.close();
if (rs != null)
rs.close();
} catch (SQLException e) {
e.printStackTrace();
throw new RuntimeException("error.rs.close");
catch (SQLException e)
e.printStackTrace();
throw new RuntimeException("Unable to get connection.");
finally
try
if (con != null)
con.close();
catch (SQLException e)
throw new RuntimeException(e.getMessage());
}

You can use PreparedStatement and
String cmd = "select * from PP where role=?";
PreparedStatement stmt = conn.prepareStatement(cmd);
stmt.setString(1,theRole);

How to pass the value one portlet to another portlet

I have one page they are two portlet one portlet html portlet, another one form portlet. i want html portlet value pass to form portlet , is possible pls replay me

in the tag ACTION of the HTML portlet, or in a HREF tag inside, you just have to put the URL of the same page, but with adding the parameter. (this step in manual because it's a html portlet).
Then, you declare the parameter at the page definition level (as documented), and finally, you map the page parameter to input parameter of the form portlet. I Hope that Form portlet accepts input parameters. You better Check before.
Other technique: Use the companion portlet of omniportlet which builds a parameter form. It's suitable for entering value that are propagated to others portlets in a page. And the call back URL is build automatically.
Patrick.

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass a value to a bind variable in a query report in oracle apex

Hi Guys,
I have requirement to send weekly reports via email to some users. The users should receive their own records in the report. The user details is stored in a table. What I am planning to do is to create a report query in oracle apex to generate the report and then run a function/procedure via a scheduler to email the report to respective users. Now my query is ............. is it possible to pass a value (user name) to the report query to pull records of only that user? I know we can have bind variables in the report query but I have no idea how to pass a value for bind variables from a function/procedure.
Can anyone help me on this issue or suggest a better approach?
Thanks,
San

You need to use dynamic sql
But please keep in mind that since you're using Oracle you may be better off posting this in some Oracle forums
This forum is specifically for SQL Server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How can i pass the value one from to another form?

hi all
how can i pass the value one from to another form with out use it when ever i want to needed this value that ican useit?
like i have two fields U_test1 and U_test2 table name @AUSR
that i have four form A! , A2,A3,A4 please tell me in details....?

Hi,
U can assign the values to some variables and access then in ur required forms.
Vasu Natari.

How to Pass Click Value to DB using Java

How to Pass Click Value to DB using Java and display tat
clicked value row data in flex
i have created connection with Sql Server using java and drew
pie chart from values fetched from XML file created by Java
wat i need is when i click pie chart region (widget) i should
display a alert by giving value of particular widget name and Value
from Database and display in Flex Alert

Use AddResource to add Javascript in your BackingBean Code and pass the value to your javascript code.
JSCookMenu and other dynamic adding of javascript to a JSF-JSP page is done using AddResource....

How to pass the value to "Assignment" when submit the program RFITEMGL?

Hello friends,
I want to submit program RFITEMGL (t-code FBL3N) with some screen fields, some fields are OK to fill such as u201COpen at key dateu201D， u201CG/L accountu201D and u201CCompany codeu201D。 But for the field "Assignment" (It will appear after cilck Dynamic Selection), I don't know how to pass value to it.
Could you help me about how to pass the value to "Assignment" when submit the program RFITEMGL (t-code FBL3N) ?
Thanks a lot!

Hi,
Well you can create a small BDC.
Regards,
Harsh Bansal

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

SSRS How to pass subtotal value in matrix into another table just for display?

Similar Messages

Maybe you are looking for