SSRS Maps - Display data that crosses international dateline without spanning half the world

G'day,
I'm hoping someone here can help me out - I've tried a bunch of thing and can't seem to crack this one.
Basically I have a collection of position data (w.r.t. WGS84) provided by an aircraft local to my area (Auckland, New Zealand). Occasionally when the aircraft flies off to the east this position data crosses the international date line -
so Point 1 at say -36° Latitude, -179.9° Longitude,
and Point 2 at say -36° Latitude, +179.9° Longitude.
The issue I'm having is when I attempt to display this data superimposed on a map in SSRS the viewport zooms right out to show the entire southern hemisphere.
On the extreme left I have 180° Longitude, in the center of the viewport is 0° Longitude, continuing through to -180° Longitude on the extreme right. From left to right my map layer displays South America, Southern Africa, Australia and New Zealand.
Needless to say the data I was attempting to display is invisible at this scale - however I'm assuming there are some points on the extreme left and some on the extreme right (with a lot of nothing in the middle).
What I need is some trick I can apply to center the map layer projection over New Zealand so that my report doesn't freak out every time the data spans over the date line.
Any suggestions around how to achieve this with SQL Server/SSRS? Many thanks for your help :)

Hi Moshifish,
According to your description, you want to show position data which acrossing international dataline without switching each half world. Right?
In Reporting Services, since maps is based on the Bing map background, it's not a tellurian model. So the only thing we can do is split the data into two parts along the international data line. This is the default render behavior of SSRS map.
For this kind of issue, we suggest you submit it to the Microsoft Connect at this link
https://connect.microsoft.com/SQLServer/Feedback.
This connect site will serve as a connecting point between you and Microsoft, and ultimately the large community for you and Microsoft to interact with. Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you
can learn more about and contribute to the exciting projects on Microsoft Connect.
Reference:
Maps (Report Builder and SSRS)
"Best Practices" when spanning International dateline?
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Similar Messages

EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.

EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9. This issue occurs for some users only.I tried the same url in google chrome and is working fine.
Can you please help.
Please find the attached screenshot.

Hi BJ1986,
According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
as a trusted site in IE browser to check this issue again.
If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
steps below to troubleshoot the issue:
Click Tools -> Internet options.
Switch to the Security tab, click Local intranet, and then select Default level.
Switch to the Advanced tab, and click Restore advanced settings.
Temporarily disable third party add-ons. For detailed steps, please see the link below:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Tried to Change my Apple ID email - but it tells me it's my rescue email address, despite having deleted that rescue email address. What in the world can I do?

Hello all!
I'm in a bit of a quandary. I have three email addresses, and I'm TRYING to pare down the number of addresses that I use. Thus, I am trying to change my Appple ID to one of those email addresses. Having said that, I tried to Change my Apple ID (which is an email address - one of the ones that I need to get rid of) to one email address that I constantly use. However, the screen tells me that the new address I wish to use, is my rescue email address, despite having deleted that rescue email address. What in the world can I do? I'm about sick and tired of Apple ID's.

Ok I'm goin to call your old Apple ID #1 your new email you want to use #2 and another email #3.
- go to http://appleid.apple.com
- select manage your apple id
- sign into #2
- edit primary email and change it to #3
- save changes and sign out
Now
- sign into #1
- edit primary
- change it to the email that was used for #2
- save changes
- check #2's email inbox for verification email
- verify account
If done correctly you should be fine, also in terms of #3 that would be an email you have that you dont mind being an apple id that you wont use. Sorry for the funny way of explaining just thought it would be shorter to type out lol.
Note: Once changes have been made you must sign out of features such as iCloud, iMessage, FaceTime, iTunes & App Store as they will still display the old Apple ID. Sign in with new email but same password as normal.

Can't display data that exist in cupe

Hi All,
I get a problem which is thar even i entered data in the cube i cant display with charecteristics. When i go to bw and display data if i say select charecteristics i can see any data but if i dont select charecteristics i can display data. Also when i enter data and sen data it say succesful but i loose data on view. Have anyone get any problem like that thanks for your interest.
Kasim

Hi,
The code you sent appears to be the Audio Talkthrough example with several modifications. Here's the first thing I noticed that appears to be incorrect: You're using the BF AD1871 Wait on Data Ready Flag VI to fill the sub-buffer, then you go into a loop and get the contents of that buffer 256 times. You should be filling the buffer each time before you get the buffer instead of only filling it once. You also aren't resetting the data ready flag by using the BF AD1871 Clear Data Ready Flag VI.
Message Edited by Michael P on 07-28-2006 09:55 AM
Michael P
National Instruments

SAP Query Display data from 2 internal tables

Hi ABAP Gurus,
I am developing a SAP Query.
I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset.
How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in the Query (SQ01)
For every pa9050 entry there exist multiple records of ZPA9050. I need to display the pa9050 fields in the 1st row and the corresponding zpa9050 fields in the subsequent rows.
Kindly advise how to accomplish this task.
A quick reply is highly appreciated.
Useful answers will be rewarded.
Thanks
Sriram

Hi Deepika,
Your reqirement is to print data from the two internal tables ..and if u r not using interactive alv then u need to merge data into single internal table... if anycase u dont want to merge in the table itab as u told u can use another final internal table in which u can merge data from the two previous interal tables then u pass this final internal table to ur FM.
Thanks & Regards
Ashu Singh

HT1483 My ipod needed repairing, so I backed up the data into restore file. My ipod was swapped for a totally new ipod and now I am having difficulty reloading the restored data that I saved. I keep getting the corrupt or not compatible MSG??? Any Ideas

My IPOD needed repairing, so I backed up my personal data into a restore file. In the end my ipod was exchanged for a brand new one and now I am having difficulty with restoring all of my data that I saved.
While trying to restore through iTunes I keep gettingthe corrupt or not compatible error message. Does anyone have any ideas or experience with this issue?
Much Appreciated for any help!

You can not restorea a backup made with a newer version of iOS to a phone with an older version of iOS.
1400 photos stored on the phone? Do you not EVER extract them? The camera roll is intended to be temporary storage. Like the SD card in a digital camera. You should be extracting them to your computer on a regular basis.
Contacts should be synced to a compatible contact manager or cloud service. If you were not doing any of these things, guard your backups with your life and make sure your computer is being backed up on a regular basis, because you won't be able to get them back until you get a new phone with at least the same version of iOS that your 4 had.
There are 3rd party applications that say they can extract this information from a backup file, but I don't have personal experience with them.

Upload data to an internal table with Services of the Table Tool

Hi,
I'm trying to upload data to an internal table with the table with the new abap debugger but I can see the option in Services of the Table Tool. I see the information in this sap link and also I saw some screen shot in other pages.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/49/2db60934e414d0e10000000a42189b/content.htm
Is this option depends the SAP version or the patch version or I need to configure the debugger?

Hi,
I used the statement
SPLIT i_file AT '|' INTO TABLE It_file.
But it is overwriting each row but not appending to the internal table while passing do and enddo.
Actually my requirement is download the pipe delimited text file and sent an XLS attachment to the
distribution mail id's.
I know sending the mails by using the FM.
But I need all data from the file line by line and pass to the Mail sending function module.
Can you help me in acheiving this.
Regards
Jay

Display Data in Cross Tab Format...Per Quarter

Hi Team,
I have following issue...which i am struggling to solve...
My current report format is
Material Technology - Q1(Qty) Q2(QTY) Q3(QTY) Q4(QTY) - Q1(Pirce) Q2(Pirce) Q3(Pirce) Q4(Pirce) - Q1(Rate) Q2(Rate) Q3(Rate) Q4(Rate)
I have generated cross tab report...in which i am getting following display...
Material Technology Q1(Qty) Q1(Price) Q1(Rate) and so on...
Is there any way i can get the required format...please assist..
Q1 to Q4 - Quarter 1 to 4...
regards
nic

Hi Nic,
The problem is you have 3 measure objects available: qty, price and rate.
If you put them in a vertical table then you will have 3 columns. As soon as you put in the quarter to create the crosstab BO will the for each quarter display the qty, price and rate.
To solve your problem is to not create a cross-tab, but a vertical table.
For each measure object you crreate 4 new variables (type measure) using the the formula:
E.g. for the quantity in the first quarter you create variable like: qty_q1
=<qty> Where (<quarter> = 1)
The same you do for the quantities for the other quarters.
And you do the same for the price and rate.
Ending up with 12 new variables which you can put in a vertical table in any order you like.
Regards,
Harry

How to display data in interactive report column without colons (:)

Dear Apex gurus,
I'm a newbie and have just created an Apex application from a spreadsheet. I've created a named list of values and used it in a checkbox against a field in the default page 3 Create form.
When I've selected multiple values in my check box in the form, the data in the interactive report appears as one line with colons separating the selected values like this: Dog:Cat:Bird
What I would like is to have the data appear in the interactive report column as a multi-line list like this:
Dog
Cat
Bird
I can work around this by modifying the SQL code in the Region Source of the Region Definition of the report (Default Page 1 interactive report) to replace the colons with 
SELECT replace("PETS_CHOSEN",':',' ') "PETS_CHOSEN", FROM "MYAPP" Note: this doesn't format properly in the posting. I replace the colon with a html br
This works, but seems to be a hack to me. I am guessing that I've missed a simple option setting somewhere, but I can't find it.
The other problem with this solution is that when I export the report to Excel, what is exported is Dog Cat Bird, which is seems worse than colons.
Thanks,
- Morgan
Edited by: mnrussel on 16-Feb-2009 04:13

Hi Morgan,
I think you have at least two choices:
1 - Replace the colons with ', ' (comma and space) - sort of reasonable on screen and in an export
2 - Create a second page that has the same report but uses the "export: csv" template. Create a manual link to this page to replace the standard Export link. When such report pages are requested, they download immediately instead of displaying. You can, therefore, use commas in this one and tags in the on-screen report version
Andy
ps - To display tags in a post, use &lt; for < and &gt; for >

ABSEn automatically maps Port 5353 UDP to internal computer without asking?

I only have a single port map to an internal computer. It is something like:
Port 60000 WAN 65.123.456.789 -> Port 22 LAN 192.168.1.200
Looking at the AEBSn logs however I see something like this:
Feb 10 20:55:10 Severity:5 Binding added for udp, 65.123.456.789:5353 to 192.168.1.200:5353 with lifetime 3600
I know that Port 5353 is for Bonjour, but why would it map to an internal machine if I have not explicitly told it to do so? Or am I misunderstanding the log?

The log is not showing a port map.
The log is showing only the communication between the AEBSn to the remote computer.
Port 5353 is not mapped to the remote computer.

How to transmit 70 channels of field point data that i am reading in fp2000 to the client

i want know to what are the ways to do it,please send me some examples on how to do it.(datasocket,fp publish)

Check out these links. I hope that they help!
Fieldpoint and RT
Logging Data with a FieldPoint FP-20xx to View in a Web Browser
Transferring Files from a FieldPoint FP-20xx through an FTP Server
Introduction to Using DataSocket Commands to Communicate with FieldPoint Etherne
t Network Modules
Good Luck!
Mike
NI

My Phone has data that I deleted how do i get the space back?

I deleted all of the photos on my phone permanently yesterday, but after looking at how much usage i have left on my phone's space I still see that it has the deleted photos taking up false space. I checked to see if any photos where on my phone but, there weren't

what phone do you have?
try deleteing apps 1 at a time, starting with the most recent installed and working back
if that doesnt work, try a facotry reset maybe even format the sd card

Can I Write Data to a *.xlxsx File Without Screwing Up the Excel File Formatting?

I'd like to programatically add LabVIEW-generated data to a nicely-formatted *.xlsx file, one with all the right borders and column widths, etc. But every time I try to add the LabVIEW data, the xlsx file formatting gets all screwed up and the file gets corrupted. Is there a way around this?
Thanks!
- FB
Solved!
Go to Solution.

FB,
I was able to find the following link on the NI website. I think it addresses the issue you are describing using the Excel ActiveX interface.
AutoFit Columns and Rows in Excel Using LabVIEW: http://digital.ni.com/public.nsf/allkb/8697100BBFA68902862571D4006D893B?OpenDocument
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

I have windows 7 and can't get my bookmark to come out of the bookmark folder and onto a toolbar that I CAN ACCESS WITHOUT GOING INTO THE BOOKMARK FOLDER

I tried dragging from the site onto the toolbar, and even though that works on my Mac, doesn't on Win. 7. I saved Facebook to my bookmark toolbar in the bookmarks folder, but can't get it out of the folder.

My iphone 4s just developed a similar problem. Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
The symptoms I experienced were that the phone would not pull a charge. I tried different cables, wall outlet versus computer USB connection, etc. The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black.
If your battery is dead, that icon will not show up at all. If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge.

Display data to edit based on fields and its value defined in internal tabl

I need to display data in a internal table for editing in a screen.
you have a internal table with field name , data types and its value. I need to display data in a screen ( sceen painter not in a report) row by row in vrtical format.
The internal table's structure not fix. you can have any number of fields in the internal table.
Can you please send me code if it is available with you or send me any senario in SAP if any ...so that i can debug to extract the code..
have to display data vertically as below in editable format,
for example,
Airline
Flight Number
Flight date
Flight price
Airline Currency
Plane Type
Maximum capacity
Occupied econ.
Total
No of fields will change.
also F4 help needs to be attached with each field.
I think it can be done through step loop. can anybody give sample code or tell me where to find in SAP or somewhere else?
it will be great help to me..
Sanjeev

Hi
just check out this program DEMO_DYNPRO_STEP_LOOP.

SSRS Maps - Display data that crosses international dateline without spanning half the world

Similar Messages

Maybe you are looking for