Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is  not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Similar Messages

  • LOV values not displayed (when master values are changed)

    Sorry for the confusing subject....
    I have a codevalue table which contains all generic lookup values.
    employee table has employeetype which is getting value from codevlaue table but they are not linked (no foreign key relationship)
    Problem is this
    Example.... for eomployee 1 let say exmployeetype = perm. if i change the codevalue from perm to permanent.
    next time I open the employee 1; I see the employeetype = empty as perm value is not available in lov.
    Any way I can overcome this problem using configuration or do i have to generate my own lov in Vo?
    I am using oracle 11.1.1.3 adf bc.
    let me know if you need any more info

    Thanks ....
    Let me go through step by step process....
    LOV is working fine.....for employetype i see the correct value
    Now steps I performed which led to this problem
    1. for my employee #1, i have employeetype='perm'*
    2. I went to codevalue table and changed the value from 'perm' to 'permanent'
    3. I went to employee page for employee #1, i see empty employeetype (I want to see the current value which is 'perm')
    drop down for employeetype shows correct current value
    Now 'perm' doesn't exist in codevalue table and when lov gets generated..... it doesn't have that value......
    What i want is not matter if codevalue has the current value of employeetype or not, I want to see the current employeetype value selected......
    does that make sense?
    1.

  • The parameter 'host_name_full' of ICM not showing the right value

    Hi ,
    The parameter 'host_name_full' is not showing the correct value.
    It is still showing the value as fully qualified domain name, where as we have reverted the setting some time back .
    can anyone let me knwo from where does it pick up the value from .
    and how can i Edit the value to show the correct value
    Thanks
    Nikhil

    Hi Nikhil,
    Check this 2 links will be useful to u r query...
    http://help.sap.com/saphelp_nw04/helpdata/en/e7/7af83b0255a206e10000000a11402f/content.htm
    http://www.basisconsultant.com/modules.php?name=Content&pa=showpage&pid=12
    Regards,
    Sridhar

  • Camera Raw Defaults & Presets not showing menus (BRIDGE)

    Hi There
    I just upgraded to a new version of PS CS3 & Bridge and the option to apply Presets, or to Apply Camera Raw Defaults is not showing when I right click a file in Bridge. It also doesnt show up in the menu. I need to be able to Batch process hundreds of photos at a time and then convert them to Tif formats. I used to be able to do this by applying my Adobe Camera Defaults to many images at once. How do I do this now????
    I am running Bridge 2.0.0975 and PS 10. Help!! This is critical for me!!!
    thanks so much!

    > Even if old versions are available for download, having older versions available on disk in case of malfunction is a perfectly acceptable practice.
    > This applies to any update of any software.
    Agreed. I have gigabytes of disk space packed full of iso's, dmgs, and zips for
    (almost) all of the software I've installed on my computers. It's a pain to
    manage sometimes, but I know I can go back and reinstall PS7 (for instance) if I
    need to even though I have no clue where the CD is at. It's just one part of my
    configuration management and backup strategy. I don't have a sysadmin to take
    care of this kind of thing for me any more, unfortunately, so I have to do it
    myself.
    This plan also has the advantage that I don't have to be online to download
    older versions from a vendors site (if it's even available) or go searching for
    a seeded torrent (if it's not).
    I'm not saying this approach is good for every one or even good for anyone but
    me, but it is a perfectly valid way of doing things.
    -X

  • Parameter Field issue : Parameter not showing in enter values.

    i got three paramater setup...
    All three parameters are used in record selection formula.
    When i click on refresh, only two parameters are showing up in enter values screen...why thired parameter is missing?
    two parameters are date and third one is string. String parameter is not showing in enter values. How to fix this?.

    Hi,
    I haven't run into this problem so I'm not sure if it's a bug or not.  When you added the parameter to the report, did you type the parameter into the formula yourself or did your double-click on it from the Field Explorer?
    It should be fine adding it from the Field Explorer.  Strange but not really sure why it's not working for you though.
    Good luck,
    Brian

  • Preview icon not showing when in thumbnail. (Sketchu

    Hello,
    I recently updated my MBP to Yosemite and installed sketchup on it.
    The preview icon of my sketchup files are not showing when in thumbnail. But as i increase the size of the icon from thumbnail in viewoption i.e from 64px x 64px to 124px x 124px it shows. So my icon is shown as blank without any app logo. Also when i change my view from thumbnail to coverflow or something it shows. Otherthan thumbnail everything works.
    So where is the error in it?
    Please help...
    Thanks
    Amar

    Try the standard fixes:
    - Rest. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. - Restore from backup
    - Restore to factory defaults/new iPod.

  • CJI5 commitment line item report not showing po gross value

    Dear All,
    system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
    Example:
    po net value: 1000
    st 10%: 100
    po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
    what could be the reason for not showing po gross value in commitment line item report.
    Thanks & Regards,
    Sandeep

    Hi,
    As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
    I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
    Regards,
    Gokul

  • Help: Records not showing when cube is placed under the Multiporivider

    Hi Experts,
    I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
    When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
    There are 2 other cubes:
    MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
    DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
    When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
    e.g. in a simple report such as
    Row       :  Plant
    Columns:  Pqty, Sqty, TQty, AQty
    In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
    InfoProvider  InfoObject
    Bcube----
    Plant
    MCube-------Plant
    DCube -
    Plant
    and same for. e.g. 0Calyear
    and same for Key Figures, e.g. I checked all 3 boxes  for PQty which exists in each of the cubes
    1. Why is my data for BCube not showing when reporting against the multiprovider?
    2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
    Thanks

    Hi,
    regarding your questions:
    1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
    2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
    Characteristic Assighment:
    0calyear -- 3 boxes checked for BCube, DCube & MCube
    Plant -- 3 boxes checked for BCube, DCube & MCube
    0Material-- 3 boxes checked for BCube, DCube & MCube
    Key Figure selection
    PQty-- 3 boxes checked for BCube, DCube & MCube
    Sqty --checked for DCube, this key fig is ONLY in DCube
    TQty--checked for DCube, this key fig is ONLY in DCube
    AQty--checked for DCube, this key fig is ONLY in DCube
    I hope this helps you to guide me.
    Or, were you referring to mappings in the transformations?
    Thanks

  • Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.

    Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.  I also cannot attach any of these pics into an e-mail or into any other file.  I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild.  Any Help?!  Any Suggestions on how to fix this?!  I have spent almost 2 days now going through all of the published help.
    I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

    The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
    If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database  --  if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
    If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
    You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
    LN

  • My external hard drive does not show when I am trying to open a document in Office Org??

    My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

    Does the drive show up under 'Devices' in Finder?

  • Battery icon dose not showing when i plug in to usb or power

    battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

    I would try another cable or try the cable in another ios device
    to verify if the cable was broken or your iphones connector is

  • Need to send my back up email a reset security questions email but the option does not show when I click on password and security

    Need to send my back up email a reset security questions email but the option does not show when I click on password and security

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97456)

  • Date not showed when report is viewed in PDF .

    Hi,
    We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
    Totally there are four pages for the report.

    I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
    I have chatted with Oracle Support, and they will not address it with a patch for now.

  • My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

    My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

    Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working.  The only way I can fix it is by shutting down the phone. It will work for a while, then it won't. 

  • In smartforms the quantity field is not showing the perfect value .

    In smartforms the quantity field is not showing the perfect value because the point is shifting left
    insted of showing 8.10 it is showing 80.00.

    Hi,
    Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
    Regards,
    Rohan.

Maybe you are looking for

  • Muse 2014 -sub menu items appearing on roll-over etc.

    Hi, complete newbie, so sorry if this has already been covered elsewhere. Only started using Muse about 1 month ago and now using Muse 2014 - using horizontal menu widget and discovered how it now shows sub-menus when hovering over the main menu item

  • Sourcing : Error while Running Java Concurrent Program

    Hi All, Navigations: Application: Sourcing Responsibility : Sourcing Buyer Concurrent Program : Generate and Store Sourcing response spreadsheet I am trying to run Java Concurrent Program : Generate and Store Sourcing response spreadsheet in SRS Wind

  • Issue with Exporting to PDF appears to be saving Automatically

    Currently under SAP Business One Version 2007A SP:01 and PL:09 On Exporting any report or document using the PDF  button on the Toolbar Open's up PDF  viewer showing the document, but also appears to automatically save a copy into the path of the "Pi

  • Third party web fonts service "integration"

    Please make it possible for people who use other web fonts services than TypeKit in a more non annoying, hair puling approach. I use Fontdeck, Fonts.com and Linotype, not TypeKit. And I have no issue with doing it manually by pasting <link> tag into

  • Error in dimension but cannot find in dimesnions_exceptions - How find erro

    Hi, Using 11.2.0.3 on IBM Power Series 7 AIX and dbms_dimesnion.validate_dimension to see why shows compile_state as error for a dimension. Have dimesnions-exceptions table but nothing in there after running this procedure. DBMS_DIMENSION.VALIDATE_DI