Ssrs Report taking to much time to load

Hello all,
I have a matrix report which was running nice before some days, but now taking too much time to load
i tested store procedure but it is ok to return same data in 5 seconds
and when i tested in ssrs BIDS side i set 60 sec for dataset timeout option, and it gets timeout
after i set 1000 seconds timeout but it is just rolling and rolling loading
when i check in executionlog of reportserver i found something like ..
TimeDataRetrieval TimeProcessing TimeRendering Status
RowCount
131951 323
95 rsHttpRuntimeClientDisconnectionError 1784
Reply me fast please, Help must appreciated ..
Thanks ..
Dilip Patil..

Hi Dilip,
According to your description, your report keeps loading symbol when rendering. Right?
In this scenario, as you can see in the Excecution Log, it spends a lot of time on data retrieval. Based on the status information, it's the issue on the conncetion. Since you have tested the stored procedure, and it works properly. Please check if the credentials
for data source has permisson to connect the database. You can also Test Connection when creating data source. As you mentioned, it uses Raido Frequency to connection. There might be large network traffic on transfering data.
Reference:
Troubleshooting Reports: Report Performance
Best Regards,
Simon Hou

Similar Messages

Crystal Report Taking too much time to load

Dear Support team,
Every time I open an existing Crystal Report, it is taking me about 5 minutes to load (Even if its a new and Blank report). Also after one report has loaded for the first time, Loading further reports would take the same long time.
Please note that I was not facing this problem earlier (Same Crystal Report version), this issue started occurring after I came back from a leave, and our IT guy have told me that he had uninstalled the Visual Studio in my absence (License issue), and no further relevant changes that he can think of.
Appreciate your help on resolving this issue, I work with a large number of crystal reports on daily basis, and this problem is killing my time.
Thank you for your time and support.
Best Regards,
Saadeddine Nahlous
Systems Developer

Hello again,
I just found out more info about this problem that might help us troubleshoot it:
My colleague and I were both using the Old Crystal Report version 10 (Before SAP) till about a month ago. Afterwards, I have installed the new SAP Crystal Reports 2013 Trial version to test it, and i faced no issues there and ordered to purchase the product. One week ago, my company bought for me and my colleague two licenses which arrived in two boxes containing two DVDs and we re installed the software using the DVDs. Since then we BOTH are facing this delay issue when opening any Crystal Report. (The delay is unbearable, it is truly about 3 min without exaggeration).
For the record, we both have high spec PCs.
Appreciate investigating this issue with us please.
Thank you

Full DTP taking too much time to load

Hi All ,
I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
Can you all please share some pointers which can help.
Thanks
Prateek

HI Raman ,
This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
ETVC0006           /BIC/DETVC00069     rows:      1.484    ratio:          0 %
ETVC0006           /BIC/DETVC0006C     rows: 15.059.600    ratio:        103 %
ETVC0006           /BIC/DETVC0006D     rows:        242    ratio:          0 %
ETVC0006           /BIC/DETVC0006P     rows:         66    ratio:          0 %
ETVC0006           /BIC/DETVC0006T     rows:        156    ratio:          0 %
ETVC0006           /BIC/DETVC0006U     rows:          2    ratio:          0 %
ETVC0006           /BIC/EETVC0006      rows: 14.680.700    ratio:        100 %
ETVC0006           /BIC/FETVC0006      rows:          0    ratio:          0 %
ETVC0007           rows: 13.939.200    density:              0,0 %

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

BPC application is taking too much time to load

Hi experts!
I'm facing a very weird problem...
We've developed a BPC application (app name: USM).
This application is taking too much time to be loaded in some computers (around 8 minutes to load). Yes, in SOME computers.
There is around 100.000 registers in the database and most coming from material master data.
If I try to load this USM application in another computer, the process loads smoothly. The computer's hardware is all the same, the server is hyper estimated and everyone is in the same network.
I talked to infrastructure departament and we made several tests. We run BPC on the server (loaded quickly), on several computers (some loads quickly, others don't), used wireless and cable connection (got all the same result) and checked communication between BW and BPC but it is ok.
After all, I tried to load APSHEL application in the same enviroment and it loaded intantly. So, I guess it is something wrong with my application. But if was this, I suppose it should happen to all computers and not only with part of them.
Have anybody ever seen something like this?
Thank you in advance.
Rubens
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:43 PM
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:46 PM

Hi Rubens,
I would try making a couple of test:
1. I will install the client in a machine that is located in the same network segment, or try using a vpn that comunicates with the server bypassing all security devices, only to see if the network it's the problem.
2. Making a full optimize of one application to see if maybe the problem it's related to the segmentation of the cubes (i don't think that this is the problem but give it a try).
It is very wierd that in some computers happends and in others don't... also try to clean up the local cache of the applications in those computers that are giving to you bad performce and retry.
hope it helps,

Reports taking unusually long time to load

Gurus,
I am using BO 4.1 SP1. I am trying to open a report on BI launchpad. But it is taking very long time to load. This occurs even when i am trying to access the last instance. Window remains in the following state.
I checked load on the server. But tha'ts fine. What could be the issue?

Hi,
Ok, that's strange because the connection server doesn't actually handle data processing.
(that would typically be the WebiProcServer or DSL_Bridge or DF service (depending on workflow))
My advice would be to turn off 'refresh on open', change viewer technology to "web view" (as opposed to Java rich internet client) and start investigating again from that baseline.
Also, this might be indicative of a BIplatform sizing or APS configuration issue. another option: have you upped your memory allocation to the Tomcat config?
Regards,
H

PRS600 ereader taking too much time to load all the books

Whenever I open My PRS600 from complete shutdown it takes too much time to load all the files which are present in Memory card. Is anyone else facing same issue?

Hello,
Recently, I have been having some serious issues when it comes to my Sony PRS-600. I am running on a Windows 7 64-bit, and an updated Reader Library 3.3
The issue comes when transferring books to the e-reader from the library, and from the e-reader to a collection. The problem is that the software becomes intolerably slow while it's processing the command. The Reader Library software window grays out, displays (Not Working) and if clicked on it, shades to a white color and displays either "cancel operation" or "wait until program responds". If I do close the operation, it appears as if the e-reader doesn't follow the operation and still displays "Do not disconnect". Since I do not see any other way to disconnect (other than the eject option), I remove the USB plug which causes a bit more issues with the reader (such as removing all of my collections, for example!).
But anyway, that's not the main issue here. The main issue is that the book transferring is really slow. I need to wait a couple of minutes (or even more) just for the software to process. Moving just 1 MB of data requires so much time as if it's 1 GB. Sometimes it's random and does it fast, and sometimes the application is better not to be dealt with at all while it's processing the command. If I would inspect My Computer, the simple loading of the e-reader storage icons and information would make the Windows Explorer to "crash" (e.g, close all windows and then reopen them). It just happens that in all randomness even the creation of a collection makes the software slow.
So to recap: the reader software is slow when adding and moving books.
I hope someone will help me resolve this annoyance.
Thank you,
KQ

Page leads to proxy error sometimes or taking too much time to load

Hi All,
APEX4.0
Web server: Apache 1.3.9 (Oracle 9iAS 10.0.1.2.2)
I am getting the below error at first time when I try to open a page or the page takes 3 to 5 mins to load. From second time on wards, It takes 5 to 8 sec to open as normal. I debugged the page and checked the log. Logs and execution time are looking normal. why the page takes too much time to load at first time or it leads to proxy error?? Is anybody got same experience before??
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET/pls/apex/f.
Reason : Document contains no data
Please guide me to find out and resolve this issue....
Thanks in Advance
Lakshmi

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Edge Animate .oam files taking a long time to load or not loading at all?

http://pierosalardi.businesscatalyst.com
Is there a way to correct this? I have exported this Muse Site and uploaded into my server and the same thing is happening: http://pierosalardi.com/animate/ Its taking to much time to load the .oam files and sometimes they do not load at all.
This is a screen shot after reseting Safari and going to the site. If you see, there is no logo on the up right hand corner, or the icons at the bottom of the page
This is another screenshot after reloading the site. Some how all the .oam files came together but only after reloading the site.
Is there a way to correct this? I saw in another post that needed to replace the iFrame on the Muse html file and replace it with the html code generated by Edge.
Couldn't get it to work.

Hey Piero,
Love your site! I'm not seeing the loading issue, but I'm also on a fast connection so that might be it.
Took a look at the source - it looks like each button is it's own individual OAM file, which increases your load time due to the extra requests the browser has to make to load everything. Have you tried consolidating the left and right button groups into two Animate projects instead of having a seperate one for each button? This may solve your loading problems.
You can copy and paste between projects inside of Animate so aggregating the buttons into one file should be pretty snappy.
Sarah

SSRS Reports taking long time to load

Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data,      I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~)    Processing (approx~)           Rendering (approx~)
10 second                                  15 sec
        2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~)       Processing (approx~)                Rendering (approx~)
more than 1 min                            15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory   2) Other memory   3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).

Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS report taking time to load the data

Hello Everyone,
I have create SSRS report get data using web service. When i run the web service methods its gives me result instantly, But when i run the report it takes lot time to load data in SSRS report. some times in SharePoint page it shows time out error.
Could you please tell me why SSRS report lots of time to load data.
Thank You.

Have a look at ExecutionLog tables in report server database to get an idea of which step is taking more time.
http://blogs.msdn.com/b/crm/archive/2008/11/19/auditing-report-execution-using-the-reportserver-database.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Sharepoint Report is taking very long time to load

SharePoint(2010) Report is taking very long time to load and display in first attempt but from the next attempt it loads and display result normally. It's urgent..please help how to troubleshoot ...

Hi Kunal,
is there multiple report viewer webpart on page? if so then SharePoint doesn't do well with multiple report viewer web parts. if possible then merge the reports in one.
Try to implement SSRS caching/ Database snapshots for reporting services, it will help you to improve the performance:
reference: http://msdn.microsoft.com/en-us/library/bb522786.aspx
Technet article to troubleshoot report performance:
Troubleshooting Reports: Report Performance
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Load is taking too much time & going to short dump.

Hi,
We have around 1000 records to be loaded from r/3 . The load is taking too much time and it is still running.
When tried to manually update the records ,we are getting an error ' converting the rate into indirect quote: CAD/USD( ex. rate type EURX). Did any one faced this type of error.
Thanks,
APR

Hi,
what are you trying to do? If you wanna load exchange rates this can be done via context menu of the appropriate source system ( transfer global settings/exchange rates)

Ssrs Report taking to much time to load

Similar Messages

Maybe you are looking for