SSRS: Setting Header from Top/Footer from Bottom

Hello there guys
We're using RDLC-Files to create some word reports.
In our previous version, where we used RDL-Files on SQL 2008 R2, the Margin-Properties (Header from Top / Footer from Bottom) didn't get set at all an was always 0.
This behaviour was reported, but marked by Microsoft as 'By design'. Since I can't post a link, just google for
"Word export sets margin-top, margin-bottom to 0mm".
Interesting enought, on our new Version with RDLC, this properties are always set to 1.27cm, but ignore the Margin-Properties of the Report-Page at all.
Since we'd like to port our reports from the old RDLs to the new RDLCs, it would be the easiest way, if we could kindahow set these two properties.
But so far I didn't find a possiblity. Is there one, to tell the Word-Renderer what we'd like to set there?
Thanks in advance
Matthias Müller

Hi Matthias,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

How to invert vertical slide control from top-down to bottom-up style?

How to invert vertical slide control from top-down to bottom-up style?
Actually vertical slide control has default style as the below image:
I want it to be something like this:
Sorry for my bad photoshop skill

Thanks a lot !!!
It's what I didn't know

Trim off x pixels from top, y from bottom, z from sides

Hi!
I need to trim off x number of pixels from the top, y number of pixels from the bottom, and z number of pixels from both sides from a bunch of screenshots. I'm looking for a way to batch process this, and first I thought of creating an action, but I can't find a tool that will let me remove different (predetermined) numbers of pixels from different sides.
In this instance I need to remove 24 pixels from the top, 15 from the bottom and 8 from the sides, but if there is a way to make a script or action where each value can be input before batch processing that would be great (top, left, right, bottom). Not all screenshots need the same amount of trimming/cropping.
Any ideas on how to do this?

I think you should be able to do this using Image/Canvas Size, you can use Relative mode and then anchor the image accordingly. You will have to do it several times, but I think it should work and be recordable as an action..

Store Header and/or footer from flat file to an oracle table by customizing LKM.

I like to customize my LKM by adding extra option in LKM and extra step in LKM, so that I can store Header and Footer of the source File (Header : normally at beginning of the line Footer At the end of the line) in a separate oracle table.
File format would be
Header row
data
data
data
data
footer row
I like to store header row and footer row inside a table.
Please suggest how the LKM can be customized to do so.

Answered at
Re: Uploading files to server

Firefox icon has a white "no" symbol (circle with diagonal line from top left to bottom right) superimposed over it. Clicking it yields: "The application 'Firefox' cannot be launched" followed by: "-10661"

I’m a novice and a Mac user. Don’t know computer lingo. About a week ago, while working at computer, I received repeated unsolicited messages, presumably from Firefox, to update to Firefox 4.0. I attempted to comply by clicking, but maybe clicked something wrong and now can’t open Firefox. Hope I don’t lose all my bookmarks. Advice welcome.
Possibly unrelated - highlighting the icon then clicking “Get Info” yields “Kind: Application (Intel)”. Only mentioning this because, being an “iMac G5 / PowerMac8,2 / PowerPC G5 (3.0) / Version 10.4.11”, this computer doesn’t have Intel processors.
Thanks

You're welcome.
Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

Removing removal of standard image from Top Left from java applications

Hello All!
i am working on java application. i have to remove image(standard java image in every frame , dialog box and JOption Pane etc....).
I'll be very thankfull if anybody can help me.
Looking forward for early response
Asima

Hi Asima ,
you can use:
setIconImage((new ImageIcon("yourIcon.gif").getImage())); for JFrame.
For JOptionPane and others where setIconImage does not exist you have to use the constructor which specifies the owner (your JFrame with yourIcon) so it uses that same Icon. If you want to remove the Icon completely you have to create your own icon as a blue (0,0128) square and use that.
HTH
Phil

Left & Right Margin from Top to Bottom

Friends,
I want Left & Right Margin (Line) from top to bottom even if there is a single item in the Repetitive area. Problem is that when there are less items there is always a gap between Repetitive Area/End of Report & Footer.
Regards,
Uday Shankar
Edited by: uday singh on Jun 13, 2008 5:30 PM

Hi,
We have also tried to the same requirement. But we can't.
Only one thing we can do is, the end report can be set at the bottom with the property of "Align to bottom". But the Horizonal, vertical lines and grid not fills from the last item to end of report beginning.
I think this is most required to view the document perfectly or neatly.
Particularly in indian localization this is the must since the customer need to be declared the specific neat format to the legal departments.
Hope SAP Support should solve the issue. But I am wondering this question has been posted many times by many people but unfotunately nobody I think get the solution.
Thanks & Regards,
Venkatesan G.

How to remove Header and Footer from Flat File

Hi,
In a scenario , we are going to recieve a flat file which will contains header , footer and data. We have to have to load data in Oracle tables and remove header and footer.
once the data load is complete , we have to delete flat file from source directory.
Please help me in solving this issue.
Thanks,
Kamlesh

You have a header parameter in the file datastore. You can provide any number to skip rows from top of the file. For footer you can create a filter in staging area.
Filter coould be something like this.
where source_alias.source_column not like '%FOOTER_OR_ANY_VALUE_AS_PER_YOUR_REQ'

How delimited by header and footer from Source file in BPEL 11g

Hi Friends,
I have source data below like This..
SOFTWARE COMPONENTS:
BPEL 11G,
J DEVELOPER(11.1.1.3)
FILE READ ADAPTER
WEB LOGIC EM SERVER(10.3.3.0)
1|10005|857896|BR |0000 |6544|kantro|54635
1|10265|69875|.36544|2456112|00000|000000|00000|SE|5456|466554|789745|54.325|KVM|56476.32
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|55566|4454544|45669
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|55566|4454544|45664
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|55776|4454544|45660
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|55566|4454544|85668
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|55566|4454544|45666
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|85876|4454544|45666
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|55566|4454544|69848
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|69566|4454544|45666
1|10235|JA|5456|4565|56|656|5855|5555|55445|5444|D|45457|0000|KIL|6555|78966|4454544|85669
1|10255|km|5653|RJ |00000|5557544|13-08-1998
But i need to Delimited and insert the data into table ..Here Header data insert into saperate table and
middlle of the data insert into main table and footer data insert in another table it all happen one attempt by using file read Adapter(11.1.1.1.3)

You have a header parameter in the file datastore. You can provide any number to skip rows from top of the file. For footer you can create a filter in staging area.
Filter coould be something like this.
where source_alias.source_column not like '%FOOTER_OR_ANY_VALUE_AS_PER_YOUR_REQ'

Automating a border around graphics that is 5in wide and .5in from top/bottom of graphic w/stroke

I have a repetitive task at work that sidetracks me from my 3d work quite a bit. I take graphics that are converted to .ai from Coreldraw. My task is to create a border around the graphic that is either 5in wide or 6.5 wide and whatever height I need, usually .5in from the top and the bottom. Then I group them together (which isn't 100% necessary), save them back out for the desktop publisher to use in Indesign. So essentially I need a script to access the data from the entire graphic and create this border rectangle around it and center them together. I would also like it to be able to choose that if a graphic is 4.8 wide to make the border 6.5, and likewise if it's less that 4.8 wide then create a border that is only 5in wide. This whole process is necessary to import the graphics into indesign. This would save our company LOADS of time. Any help would be appreciated.
EDIT: As well the stroke needs to be aligned to the inside. This may be a very simple script, I'm just pretty new to scripting in Ai.

If there is no border it comes into ID blank. I'm not in the loop on their workflow but before I started
writing this script I asked why they needed the border and why it had to be aligned to the inside. I'm to the point of just making the script and save myself hours a day rather than question their pipeline issues. It's keeping me from getting my 3d work and animations done having to mess with it so...Here's the code I have so far.
'Variables
Set appRef = CreateObject("Illustrator.Application")
Set docRef = appRef.ActiveDocument
set artHeight = docRef.groupitems(1).height
set artWidth = docRef.groupitems(1).width
'Set variable to adjust width depending on art width
If artRef.width >= 325 then
set rectWid = 468
If artRef.width < 325 then
set rectWid = 360
End If
End If
'Make rectangle height 1 inch taller than the artwork
set rectHeight = rectHeight + 72
'Create rectangle
set rectRef = docRef.PathItems.Rectangle (700, 50, rectWid, recHeight)
rectRef.stroked = true
rectRef.filled = false
'Create white color and variable
set colorRef = CreateObject("Illustrator.RGBColor")
colorRef.red = 255
colorRef.blue = 255
colorRef.green = 255
'Apply the color to the stroke
rectRef.strokecolor = colorRef
This is my first script for Ai and I haven't worked with VB code in a good while.
I can't find a way to set the groups height and width to a variable to I can add to them to give dimensions of the border. As well I can't find an attribute to align the stroke to the inside of the rectangle.

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

How to remove header and footer from a "blank" page in Pages?

Hi,
In the top and the bottom there seems to be a header and footer, it noticeable when i do "mouse over". But when i right click i don't get the option to delete it. I cannot move it. I cannot move any other text or colums above it.
??? Help

+Inspector > Document (1st tab) > Document > Uncheck Header and Footer+
The Pages09_UserGuide.pdf is available for download under the Help menu and is a good read.

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

HT1766 I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.

Remove Header and footer from Word Docs

Is it possible to remove the header/footer from Word docs?
The html output from ctx_doc.markup gets the header/footer and (specialy)page numbers all messed up.
[]'s
thanks

Please define 'messed up'. I'll reproduce here and then try to find a cause/solution. I checked a couple of other forums and Metalink with no good discussion on the topic.
-Ron

SSRS: Setting Header from Top/Footer from Bottom

Similar Messages

Maybe you are looking for