SSRS Subscription LastStatus "Failure sending mail: Failure sending mail."

SSRS 2012, SQL 2012 SP2.
We have about 50 different daily subscriptions that go out. In the last month or so, probably over 30% of SSRS subscriptions are getting this error and no e-mail is sent. I have tested out the reports with the parameters and the reports run just
fine on demand for both the user and myself. I'll change the subscription forward for testing, and it will intermittently work or fail even when no traffic is hitting our database so I dont think it's a matter of performance.
I see nothing in the error logs, and I see nothing in the logtable 2, or 3 in ssrs as suggested by a few MSDB sites.
The only spot I can even see this error, is when viewing the subscription. I have done LOTS of searching, and most people get a helpful error after "Failure sending mail" where as I only get 'Failure sending mail: Failure sending mail"

Hi,
Does your network is always available? Your scenario is so strange. Please check if you have missed something according to this article:
https://msdn.microsoft.com/en-us/library/ms159155.aspx.

Similar Messages

Ssrs 2012 - send email failure

Hi,
I have scheduled a report but this is the error it shows:
Failure sending mail: Failure sending mail.
Do you know where I can get detailed information on the error?
Any suggestions please?

Did you setup mail profile properly?
see the subscription config to get more details on error first
http://www.sqldbpros.com/2013/11/ssrs-subscription-error-failure-sending-mail-the-report-server-has-encountered-a-configuration-error-mail-will-not-be-resent/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Hi,
I have read your links.... thank you, and believe what I have done is correct.
But may be if I get more detailed information about this error that I get from a log file or somewhere then I can investigate the error further.
I should mentioned that the sql query in the link you sent does not return any rows and I do not know where to see the subscription Configuration?
Is there a way to see more information about the error message I get?
Thank you
Yep..The first place where you can check is the subscriptions page in report server
Also see this similar discusiion
http://social.technet.microsoft.com/Forums/en-US/e18054ca-82ee-4281-8217-078013e1109f/ssrs-error-failure-sending-mail-the-report-server-has-encountered-a-configuration-error-mail-will?forum=sqlreportingservices
And this link
http://sirsql.net/blog/2012/4/19/ssrsemail-subscriptions-not-being-delivered.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Before Workflow Notification Mailer fails sends failure alert.

Hi,
We are using Oracle E-Business Suit R12. It happens few times that Workflow Notification Mailer fails (unknown reason), thus stopping all the upcoming alerts.
1). Please tell me if there is way to identify those unknown reasons?
2). Secondly is there any way that before Workflow Notification Mailer fails generate an alert on just before failure?
Regards,
Farooq Khan.

We are using Oracle E-Business Suit R12. It happens few times that Workflow Notification Mailer fails (unknown reason), thus stopping all the upcoming alerts.
1). Please tell me if there is way to identify those unknown reasons?Please check the Workflow log file for details about the error.
How to Troubleshoot when the Workflow Services Go Down [ID 564394.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 75384
How To Troubleshoot Java-based Workflow Notification Mailer [ID 242941.1]
A Guide For Troubleshooting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
Oracle Workflow FAQ [ID 465887.1]
Workflow Scripts [ID 183643.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Troubleshoot&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Diagnostics&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
2). Secondly is there any way that before Workflow Notification Mailer fails generate an alert on just before failure?https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Monitoring&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Sending mail failure

Hi
I cannot send any e_mail via yahoo on my iPhone via wifi..(via apple.stmp.yahoo)I already receive mails but Ican't answer or even send new mails?? I re set my yahoo account on my PC and turned off my ip, then reset it and chosed yahoo mail but sending mails remains impossible..any help??thank you

Hi,
Does your network is always available? Your scenario is so strange. Please check if you have missed something according to this article:
https://msdn.microsoft.com/en-us/library/ms159155.aspx.

Why do i keep getting "Message Send Failure" every time I send pictures on iMessage? All are sent to other iPhone/iPad users.

For a few months now, I've been getting "Message Send Failure" every time I send pictures to other Apple devices (iPhones, iPads, Macs), despite the recipient receiving them. So, even though the pictures are going through, the "Message Send Failure" notice keeps showing up. I checked with other people who have Apple devices and they also encountered the same issue whenever they send pictures (usually send an email to make sure it was received). I thought when iOS 7.1.1 came out that it would fix this issue. Has anyone else encountered the same issue? Thanks!

I started getting the error on my iPhone 5 (iOS 7.1.x) several weeks ago - if not a month ago. Today I finally decided to run through a wholesale sign-out/sign-in process on all my devices (iMac, MacBook, iPad 1, iPad 3 and iPhone5) and it worked!
I signed out of iMessage/Messages on all devices. I also deleted my iCloud accounts on all my devices (make sure you tell the software to keep local copies when you are prompted - relax, it all stays in the cloud, too) Then I signed back in to iMessage/Messages and then re-added iCloud accounts all around. I just sent a message with a photo attachment and did not get the "Not Delivered" message - yay!
(FYI - even though I received the error every time I sent a message with an image attachment, the message still went through - very, very happy, though to finally get rid of the message...)

Send message failure when Messages beta is installed

Did you know that in some cases, iMessage on your phone will have send message failures on both sides of the conversation when Messages beta is installed on your Mac? Messages doesn't even need to be running. As long as you have it installed and your computer is running, you'll get the send message failures. Happens to myself and two friends. Just tested this myself.

Hi,
Can you detail how this is repeatable ?
8:21 PM Sunday; March 18, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

"Message Send Failure" every time I send pictures on message?

"Message Send Failure" every time I send pictures on message? Help. This is also happening on my husband's phone. I have the 5C and he has the 5S. This all started about 4-5 weeks ago. The picture do however go through.

There have been many, many reports of this lately so I believe it's not anything you're doing.

When send message it's says " messagae send failure" but message already send.why?

when send message it's says " message send failure" but message alredy send.why?

Go through the troubleshooting steps under "If you see 'Waiting for Activation'..." in this article: http://support.apple.com/kb/ts4268.

Suggestion: Send Message Failure Notification

Is there somewhere for iPhone OS update suggestions? I would like to suggest that a send message failure (SMS) notification for the next one update. This problem is pretty common for me (once or twice a day at least) and I'll end up looking at the recipient's concersation and discovering why they didn't reply 2 hours after sending the message.

Click here and fill out the form.
(47821)

HP LaserJet M5025 MFP "Inflate Failure - Download file now - send rfu upgrade on usb dev port"

HI,
I have a HP LaserJet M5025 MFP with "Inflate Failure - Download file now - send rfu upgrade on usb dev port" error. I have tried to solve this problem. I send the firmware using the run dialog " cmd /k copy /b C:\tmpfrm\your_firmware_filename.rfu \\your_pc_name\HPLaserJ. After that, the MFP screen appears "unsupported file type - Code CRC error". I tried to download several different firmwares but always get the same result. Help me please to solve this problem.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can't send Mail on Mac Mail, but can on Entourage - what am I doing wrong?

Aggg. Help.
I have been using Entourage on my Macs, and have decided to switch to Mac Mail. I have multiple accounts for my websites on my dedicated server. I use standard ports for sending and receiving mail - and, as it is my server, I can dictate all controls.
So... I can receive mail on my Macs, but can not send. I am trying to set-up IMAP accounts - and my server requires i use as outgoing" mail.mywebsite.com
I use a linux server using cPanel.
It works on Entourage. But Mac's Mail will not accept the outgoing mail information. I have tried with and without authentication (which is required). I have overridden the port and tried each individually (25, 465, etc..). I have tired smtp.mywebsite.com rather than the required mail.mywebsite.com, just to see. I have tried every combination of information with no luck. I sort of think I know how to set it all up, but can not understand what I am missing?
Why can I not get Mac Mail to send?
I can match what is in use by Entourage - but it just does not work.
I use MS Office 2008's Entourage - and to make things more fun, Mac Mail will not import my Entourage accounts (says it can not find them). I am using a 3 month old iMac with latest OS. I have been on Macs since 1988 - so I just don't get what is going on. HELP PLEASE. Puuuullleeeeeaze.
thanks!

Hello,
If you open the Activity viewer (click on Window in the menubar and choose Activity) and watch when you try to send, what phases if any are indicated are taking place before failure?
What type of authentication is required for this SMTP? When using in Entourage, what are the selections in Advanced sending options, particularly regarding the box beside Use same settings as receiving mail server?
Ernie

Mail is sending spam out on its own!!!

Hi
I have recently been getting a lot of "junk" mail saying "Undelivered Mail Returned to Sender" and "* has detected a suspected spam in a email from you" and "Delivery Status Notification (Failure)".
Now I am obviously not sending any of these emails manually but something seems to be sending them from my system.
Can anyone tell me how I can stop it doing this?
Lee

Was this always the case or did you train the junk filter to do so?
I use spamsieve which does require some training and yes I did train it. But it does recognise spoofed mail returns and it does filter them. It seems recognise what is a genuine bounced back mail and what is comes from a spoofed mail address.
spamsieve is the best filter I know for OSX if your not running your own mail server. If running a mail server your best using spam assasin.

The "send" button in the mail programm is gone ... how can I make it visible again?

For a couple of days my "send" button in the mail programm is gone and I can´t send emails due to this failure. I am pretty sure my 2-year old daughter hit some button by accident and the "send" button is gone since then. She discovered a couple of features by accident I would have never dreamed of so far so I believe the hidden button is also possible to get back. Please help since I couldn´t find something so far.
Thank you!

right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego

SQL Server 2008 Database Mail Failure

I am currently using SQL Server 2008. I have database mail setup and it was working for a while without any issues. However, now we are getting the following message anytime it trys to send an email with a domain address other than our own.
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2010-07-21T15:21:58). Exception Message: Cannot send mails to mail server. (The operation has timed out.). )
The emails have been setup and working since last year up until June 30th. I have made sure that the server name for the email server is correct. Ports 25, 110, and 443 are open on the email server and I setup the database mail to use port 25.
The sever name is webmail.somecompanyname.com
I tested on the server that I could telnet to the mail server and I get the response back from the server that says ready.
I tested sending an email to my work address by right clicking database mail and send test e-mail. When I send it to my work email it works fine (myname.somecompany.com)
When I do the same test only sending it to my personal comcast account I get the error message in the
sysmail_faileditems.
Can anyone help shed some light on other possible issues that might be causing this to fail now?
Any help is greatly appreciated.
Thanks in advance.

My issues with the email might be fixed now. I will be keeping an eye on it today.
It turns out that we have 2 IPs for the 2 different internet providers that we have for our company.
In the
On Mail server > Exchange Server Manager > SMTP Connector Properties
> Access Properties > Access Tab > Relay button it had the ip address for one of the providers, but not for the comcast one that we just installed on June 30th.
The network administrator added the ip for comcast to the location above and it seems to be working now.
We will keep our fingers crossed.
Thanks for all your suggestions.

Setting up Mail to send only (not receive)

Hello all,
I currently use Mail to send/receive to/from my Gmail account, and Entourage for my work (MS Exchange).
I want to use iWork 09 and the functionality of sharing documents using iWork.com.
The email addresses that iWork uses (for notifications to someone you want to share a document with) comes from Mail. So if you have multiple accounts on Mail, you can choose which one the email will appear from.
Obviously for work documents, the emails need to come from my work email, not my personal Gmail address.
So is there a way to set up an account (using POP3 or IMAP) so that it ONLY sends, and does not receive email?
It is straightforward to set up a fully functional POP3 or IMAP account for my work email using Mail, but with over 2GB of mail on my Exchange account, I don't want to duplicate my whole Entourage emails...
Thus my need to be able to _send only_....
Any pointers appreciated.

Hey Steven,
Sorry for digging back in the archives for this one, but a while ago you solved the problem of a missing iCal alarm clock with the following solution...
Thank you. This has been bugging me for far too long, but you finally made me look to see what was wrong. Here's what I did that has fixed it on my machine.
(I probably should have quit iCal first, but forgot.)
1) Navigate to iCal in your Applications folder.
2) CTRL-Click on the iCal icon in the Applications folder.
3) Select Show Package Contents
4) Double click on the Contents folder
5) Double Click on the Resources folder
6) Double click on the icon for alarmclock.mov
A dialog box came up telling me that the movie requires Adobe Flash to play, which is disabled in QuickTime, and allowed me to enable it. I also had to select 'apply to all movies'
7) Start iCal and test it. I had to restart iCal a couple of times, but that's probably related to my not remembering to quit the application before I started messing with its guts, and my failure to apply the change to all QuickTime movies.
Good luck
srb
Well I tried this without success... QuickTime opens alarmclock.mov, but it's still just a black square. Hope you may be able to help on this one... again!
Cheers!

SSRS Subscription LastStatus "Failure sending mail: Failure sending mail."

Similar Messages

Maybe you are looking for