ST-PI and ST-API plug in upgradation
Hi All,
I need to upgrade the plugins ST-PI and ST-API and our team has downloaded the below things from service market.Can any body tell me which i need to deploy and the sequence and what are the things i need to keep in consederation please let me know.
1.Application service tools for R/3 46C
2.Service tools for other for APP/Basis 620
3.ST-PI 2008 1 46C:Add on installation
4.ST-PI 2008 1 620:Add on instalation
Please let me know for what 1&2 are used and the procedure (sequence of applying)
Thanks in advance for the help,
Thanks&Regards,
Raj
Hi Raj,
You did not mention about the system version. I could see the patches which are downloaded are for
46 C and 620 both.
By the way ST-PI and ST-A/PI can be applied in any sequence.
Regards,
Ashish
Similar Messages
-
Mac Lion 10.7.3, LR 4.1, CS6, Canon 5D Mark III and all the plug ins upgraded! Need the RAW update!
My workflow has tripple because nothing wants to run smoothly! I am so bent because Adobe, Canon, Apple and every other plug-in software provider can't seam to get on the samer fricken page and I've spent BIG $ over the last 2 months trying to make everything run better... Where is the latest RAW?
I Purchased the Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, Mac Pro server update to Lion, WHEN is next dot release Camera Raw? My workflow has trippled in time because of this issue. I'm so frustrated with having to convert images in a slowed up piece of crap canon software package and then wait another decade for the newest LR to load the images I could crap fire! Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. As for Canon, they are not consistant with community software sharing and can kiss my *!! because to leave Adobe hanging sux!
There should be new laws that penalize jerks that screw with workflow!
Time is money, let's go Adobe!Let's see:
5 Minutes of research would have told you about 5DMKIII support availabitliy but that is too much time to spend additionally researching a 15K purchase.
You paid 79.00 for the LR Upgrade and 14,000 plus for the rest of the package.
You bought a camera that was released after the 79.00 software.
You are using a Public Beta for the other software (no cost to you)
A Camera Raw release candidate with support is availabe. I(again no cost to you
Yet you say:
"Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. "
So far, you've paid 79.00
Finally: this is a user-to-user forum-not a direct conduit to Adobe. -
Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?
-
Hello - I upgraded from photoshop cc to cc 2014 and lost my plug ins. How can I move them into cc 2014? Thanks
The install of 2014 doesn't move or copy anything from a previous version, with the exception of settings. You can go into your Photoshop CC installation folder, navigate to your plugins folder and then just copy all the plugins you've installed from that folder and into the Photoshop CC 2014 plugins folder. The plugins should then be available in 2014 the next time you launch Photoshop.
The only thing that may prevent this from working is if you're using the 32bit version of Photoshop CC. Photoshop CC 2014 is 64bit only so 32bit plugins don't work. If this is the case for you, check out the manufacturer of the plugins and see if they have 64bit versions available. -
I have a new computer and when i plugged my iphone in to upgrade it, I lost all of my songs and applications. I need to know how to recover it as I've looked all over the website and my account is empty?
If you are in the USA (is that Pearland, Texas), with iTunes 10.3 and iOS 4.3.3 or later, you can download your previous purchases directly to your iPhone, iPad, iPod touch, or computer.
Here are the instructions: Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519 -
My ipod when i cut it on shows the ITunes icon and the usb plug icon on my ipod screen. so I plugged it into my computer and when it took me to the Itunes menu it says I needed to reinstall the proram to the manufactures settings and upgrade. My Ipod appears to be whiped clean. I does nothing now. It didnt reinstall or upgrade at all. I have 2 Ipods and I think things got crossed up with them.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
Unable to uninstall Adobe Reader 7.0 (SSSecurity.api PLUG-IN missing) what should i do?
Unable to uninstall Adobe Reader 7.0 (SSSecurity.api PLUG-IN missing) what should i do?
I want to install adobe Reader 8.0 and first I would like to uninstall my Adobe Reader 7.0, However, when I click on Unistall, it says PLUG-IN SSSecurity.api is missing, and it won't allow me to unintall.
I am using Windows XP
What is the problem there?
What should I do?
Please helpWhen I want to install 7.0 again. (I tried to do a override file)
The following message will appear, and it will stop me from instal
"This Patch Package could not be opened, verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer patch package" -
Phone dying and my mom used my upgrade
I've had the original Droid since 6/2010. I would be due for an upgrade soon, but my mom used it a few months ago. Her upgrade isn't until November, according to the My Verizon app on my phone. I'm not the account holder so I can't see on the web site.
Anyway, my phone isn't going to live that long. Any chance they would let me upgrade now?
When I plug my phone in to charge it resets or goes to a black screen with white text that says something about Bootloading.Your best bet is probably to go into a Verizon store and talk to someone (I've heard calling in works too but I've never tried that myself). You might be able to get someone to help you out. I was talking to one store person and they said basically that they can't do anything for you unless you have less than a year on your contract (which you do). From there, it's typically up to the store whether they want to help out or not (they usually budget some money for circumstantial upgrades or to waive certain fees, give accessories, etc).
That said, typically, phones can't be discounted past a certain point and sometimes, they'll try to make it up in other features, accessories, etc. So even if you can't afford the full or "discounted" price of the phone, they might be able to help you out in one form or another.
Another option for you to get by til November is to take your mom's old phone, if it's in worse condition than yours. Or have your mom use her old phone and YOU take her new upgrade that was actually YOUR upgrade. But that's between you and your mom (and if she's paying the bills, you don't have a whole lot of leverage on that one).
Good luck! -
Got a new car and when i plug in my older shuffle it ask me to check the firmware. What do I need to do?
It's possible that your new car audio system is not compatible with your older shuffle, or it may not be compatible with shuffles, period. You should consult the documentation for the car audio system (or its tech support) to check the list of compatible devices.
There is no firmware upgrade for an old shuffle with will make it work, if the car audio system does not support the device.
NOTE: As an alternative, you can buy an inexpensive USB flash drive. Maybe you already have one. Load it with your favorite songs. Here's one that barely sticks out of the USB port
http://eshop.macsales.com/item/SanDisk/SDCZ33008G/
with several times the storage capacity of a shuffle. No dangling cable and more resistant to extreme heat/cold, and you can leave it connected to your car audio system. -
I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US -
I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie
The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade. -
I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!
Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete. -
Lenovo G560 - Issue with won't boot and black screen after HDD upgrade
Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I have usb cord from printer to Mac cannot print anything and says missing plug??? Anyone who can help me? I do not understand what missing plug means?
What Mac?
What Mac OS X?
What Printer?
What software are you trying to print from?
What sort of stuff are you trying to print? {just text, text and some diagrams, graphics, photos, animated Giffs, movies, something else}
Maybe you are looking for
-
Relationship table of Sales Order (VA03) and Delivery Order (VL03N)
Hi everyone! What table can I see the relationship of Sales Order document (VA03) and Delivery Order document (VL03N) as shown in VA03 > Environment > Document Flow? I mean, what tables saves the partnerships of each document (query sales order no. a
-
IPod touch 4th gen that wont charge or show up in itunes.
I have an iPod touch 4th gen. that wont charge. When I plug it in, it shows the battery with a little red at the one end and a lighting bolt ( the usual screen when charing the itouch after it is completely dead). I have left it in pluged in for a fe
-
How to use a gunshot in iMovie 11'
Well I simply just don't get it. I've tried to watch multiple YouTube videos to see how The only thing I got was how to download the actual video . Whenever I choose picture in picture when I drag a vid into another it shows up as a black background.
-
I create a BPM project and a process in this project. I copy a process in the same project. However, after this project is deploying to BPM standalone 10g, the original process disappears. But in the studio, the orginal process is still there and the
-
After ml download no startup- just spinning doughnut
Just installed mountain lion from snow leopard. Computer won' move past spinning doughnut when starting up