ST-PI nad ST-A/PI VERSION

Hi,
I am in the process of go-live auditing early watch alert configuration. and bi system patch level below i mentioned.
SAP_ABA 700 18
SAP_BASIS 700 18
PI_BASIS 2005_1_700 17
SAP_BW 700 19
BI_CONT 703 11
solmon is 7.0. and for ecc 6.0 already configured EWA.
for ecc they have implemented the below patch level.
ST-PI 2005_1_700 0003 SAPKITLQI3 SAP Solution Tools Plug-In SAPKITLQIA 2005_1_700
ST-A/PI 01I_ECC600 0000 Application Servicetools for ECC 600 SAPKITAR7A 01I_ECC600
For bi which ST-PI and ST-A/PI i have to download for my ewa config.
kvl

Hi
If you run report RTCCTOOL in your BI system it should give you the answer.
Mark

Similar Messages

Passagem do XML version no SCAN.

Olá Pessoal,
Eu estou ativando o SCAN na 4.6c e depois de estudar o funcionamento do SCAN estou tentando testar o mesmo. Porém descobri que na versão que eu estou trabalhando aqui no lado R/3 a função J_1B_NFE_CHECK_ACTIVE_SERVER chama a função de checagem do servidor no GRC(/XNFE/RFC_SRVSTA_READ) passando alguns paramêtros. Na estrutura LT_REGIO está passando apenas valor para o campo REGIO e nada para o campo VERSION, sendo assim no lado do GRC existe um código que valida se o VERSION está em branco e se sim ele alimenta esse campo com o valor 005a(versão antiga).
Existe alguma nota de correção disso, é algo configuravél ou preciso tratar isso pela metodo GET_SERVER na BADI ????
Eu procurei notas mas não encontrei e creio que o SAP deveria passar o valor 006 no campo VERSION ou no GRC ter uma validação para chegar qual a versão do XML e preencher corretamente caso venha em branco, certo?
Obrigado,
Michael Peretto

Bom dia Michael,
Trecho de código da nota, ele só não passa quando versão 1.10, se for 2.00 ele seta o 006:
ls_regio-regio = ls_branch_info-regio.                   "1484983
* Convert XML version to GRC format                        "1484983
IF ls_cust3-version >= 2.                                "1484983
   ls_regio-version = '006'.                               "1484983
ENDIF.                                                   "1484983
APPEND ls_regio TO lt_regio.
Abre um chamado para XX-CSC-BR-NFE, provavelmente este trecho está faltando para 4.6c
Atenciosamente, Fernando Da Ró

Problem installing flash 9 (nothing new I'm sure)

cuttin to the chase, bought a mac secondhand off a friend with mac os x 10.2.8 on it (explains why such an old version of os x).
been trying to upgrade the flash player (which is currently...6 i believe) to 9. have gone through the adobe site and followed all their prompts in addition to at least ten other forums upon my search for a solution, all to no avail have tried various combinations of the following but mainly:
- I delete the old flash plug in file and folder from the internet plug ins folder in library.
- drag the two new plug in file and folder from the downloaded flash mount thing (ok, so my terminology ain't so crash hot...) and into the aforementioned folder.
- exit firefox, restart computer, even go into disk utilities and run repair permissions
BUT regardless of what order I do this in, everytime I test what version I have on adobe's site or try to view something on youtube etc, nada, still the same version
now, it may be something really simple, but alas, my limited knowledge in such things prohibits me from resolve. is there any advice from you guys? would be much appreciated. cheers!
kind regards,
marcus

hi there--
i found a link with info concerning this error which recommended typing the following into terminal to resolve this issue--
sudo chmod 775 /Library/Components
the link is here if you'd like to look over it. http://www.unibrain.com/support/FAQFire-iDC.htm seems it is a permissions error. it is not for the same thing, but the error is the same, because it is an os x error, not a flash error. you could also simply try repairing the permissions beforehand. [ 8 ) ]

Licencias de Acrobat

No puedo ver las licencias que tengo registradas en la pagina de adobe cuando inicio secion con mi usuario. Me comento el proveedor la ultima vez que fueron registradas a otro nombre, lo confirme con la persona y tampoco le fue posible revisarlas. Por que desaparecieron? intento de registrar nuevamente las licencias por numero de serie pero dice que no son validas.

No esta nada claro lo que dices. Si los registró otra persona con su ID, podría comprobarlo, y cómo sabe el proveedor (el vendedor?) que se registraron con otro nombre, con esa persona?
La única solución que hay, es, suponiendo que los numeros de serie sean auténticos, que quién los registró hable con Soporte Técnico de Adobe, para ver si a traves de algun dato, direcciones e-mail, etc. los encuentran, caso frecuente cuando se han usado varios nombres.
Ahora bién, en el orden práctico: si tienes los programas instalados, funcionando, el registrarlos no es obligatorio, para nada. Puedes actualizar versiones, desactivar, desinstalar e instalar de nuevo en el mismo u otro ordenador,...
Cúal es entonces el problema?

Itunes refuses to open after installing yosemite. downloaded and installed the latest version but nada

itunes refuses to open after installing yosemite. downloaded and installed the latest version but nada

Thank you for the response Linc- here are the first four dozen lines-
12/8/14 13:07:54.000 kernel[0]: memorystatus_thread: idle exiting pid 2205 [accountsd]
12/8/14 13:07:55.000 kernel[0]: memorystatus_thread: idle exiting pid 2236 [com.apple.Accoun]
12/8/14 13:07:56.000 kernel[0]: memorystatus_thread: idle exiting pid 2243 [com.apple.Addres]
12/8/14 13:07:57.000 kernel[0]: memorystatus_thread: idle exiting pid 2267 [CloudKeychainPro]
12/8/14 13:07:58.000 kernel[0]: memorystatus_thread: idle exiting pid 2212 [CalNCService]
12/8/14 13:07:59.000 kernel[0]: memorystatus_thread: idle exiting pid 2204 [CalendarAgent]
12/8/14 13:08:01.000 kernel[0]: memorystatus_thread: idle exiting pid 2269 [diagnosticd]
12/8/14 13:08:02.306 UserEventAgent[234]: com.apple.TMHelperAgent.SetupOffer enabled
12/8/14 13:08:02.000 kernel[0]: memorystatus_thread: idle exiting pid 2271 [com.apple.CloudP]
12/8/14 13:08:02.769 com.apple.iCloudHelper[2237]: service connection interrupted
12/8/14 13:08:02.769 com.apple.iCloudHelper[2237]: service connection interrupted
12/8/14 13:08:03.000 kernel[0]: memorystatus_thread: idle exiting pid 2268 [com.apple.sbd]
12/8/14 13:08:04.578 UserEventAgent[234]: com.apple.TMHelperAgent.SetupOffer enabled
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
12/8/14 13:08:04.000 kernel[0]: BUG in process suhelperd[177]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)

Trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), nad do I want to relace with older version. I do this and then it says change can't be done because Firefox is in use. ??

trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), and do I want to replace with older version. I do this and then it says change can't be done because Firefox is in use. ??

That version cannot be upgraded further if it's a 2G model. The 3G model can be upgraded to iOS 5.x.x. You can't have a 2G model because the maximum iOS version is 4.2.1.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Hola tengo itunes 10.6 cuando entro siempre me sale actualizar nueva version 10.7 le doy actualizar y no hace nada tengo windows starter que hago?

Hola cuando entro en itunes me dice que existe una nueva actulizacion de itunes 10.7 le doy actualizar y no hace nada ? tengo windows 7 starter

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Mi iphod se bloqueo se le puso en la pantalla una leyenda que dice que lleva 2 semanas sin crear una copia que si esta conectado se actualizara solo pero no pasa de ahy ya lleva 4 dias que ago ya actualice la version y nada

EN MI IPHOD SE APARECIO LA SIG LEYENDA
LLEVA 2 SEMANAS SIN CREAR COPIA DE SEGURIDAD
MIENTRA ESTE CONECTADO Y BLOQUEADO SE ACTUALIZARA
AUTOMATICAMENTE
YA LO CONECTE Y NO PASA DE AHY LLEVA 4 DIAS

aqui esta el reporte.
ademas de eso pense en esta solución hacer una nueva ventana (segundo adjunto)
en este si puedo cambiar los datos del reporte bueno aun debo aumentar algunas cosas verdad.
Pero esta es mi idea o si tienen una mejor gracisa.
Y como les decia necesito q me permita cambiar el usuario y la contraseña sin tener q ingresar al diagrama de bloques solo desde el panel frontal y con el programa haciendo RUN.
Porq la aplicación final sera en un ejecutable
Reitero muchas gracias por la ayuda
Attachments:
reporte4.vi ‏34 KB
REGISTRO CONTRASEÑAS Y USUARIOS.vi ‏40 KB

Hola mi telefono se quedo en que no se puede activar actualize a una version mas reciente y nada

hola mi telefono quedo en que no lo puedo activar despues de la actualizacion de softeare que puedo hacer

Message not clear. Use smaller sentences. Google translator.

Firefox update 10 won't open and the previous version 3.6 won't load any pages. I have done everything this site said to do. HELP?

The last version of Firefox that I had was the one before 3.6. I stopped upgrading due to it always messing up and not working right for me... whether it be due to vista, or just errors on your part. My husband decided to upgrade firefox to the newest one two days ago because the version I had was just "too slow!" Ever since he did that, I cannot get firefox to open. No matter how many times I uninstall it and delete everything mozilla on my computer then reinstall after restarting my computer, it just refuses to open. Every time i try it says that firefox has stopped working. It cant even check for solutions. I then try to click on the icon and I get something that says: firefox.exe - Bad Image C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCP80.dll is either not designed to run n windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I have tried installing it over and over again several times, same message shows up. So i had clicked on the link to go download the previous version of firefox... what sucks is that the only version on the site is 3.6.27. I have never upgraded to this. So the second i installed that version, i now am able to open up firefox... BUT it is unable to connect. I have internet... a pretty bad ass connection. So my internet is not the problem. I then looked up how to fix that issue and did all 5 things listed under the Firefox cant load pages but other browsers can link. Still nada! I am now stuck using IE and going insane. I am on the verge of throwing my laptop out of the damn window because I have to wait 3 hours for google to load. Nothing is working for me... and it would be appreciated for something more. If i can get help with a ton of details on what to do or how to fix this issue... either version... i would greatly appreciate it. I am going nuts having to put up with IE because my husband decided to update Firefox to a version that sucks with vista!

Here is the system requirements page: http://www.mozilla.com/en-US/firefox/system-requirements.html.
http://www.mozilla.com/en-US/firefox/all-older has the latest 3.6.x version, and http://www.floodgap.com/software/tenfourfox/ is another option.

DEEPLY upset w/rapid-fire updates 2 FF & TB. ex: michael b unable 2 update toolbar buttons; w/out them FF/TB just other apps. this method incredibly disconcerting, frustrating, etc. PLZ RECONSIDER METHOD; go back 2 version changes. annoyed w/mozilla, LA

i've been using [& updating] mozilla FF & TB for years...in large part cause i felt they were the best for my needs, allowed the most functionality...and then became the most attractive with personas. but i found a long time ago, as with most computer applications, to wait till the second version of a new product. this was especially true of mozilla to make sure the add-on developers can keep up.
the add-ons to FF & TB give me so much more functionality....so much better than any other browsers out there. and then there are the changing personas...too match one's changing moods. [all hail MaDonna and her constantly exquisite & innovated art work.]
but mozilla has now made continuing this functionality an impossibility by its new horrible rapid update methodology. because MANY DEVELOPERS CAN NOT KEEP UP with this pace of significant change, FF & TB have been become FAR LESS FUNCTIONAL...and thus more & more like other, previously lesser, browsers & email programs out there,
is this perhaps the clue to go take a look at chrome, safari, opera and other browsers?
using this "update" methodology, will mozilla become like its predecessor, netscape.....OBSOLETE.
or, as has happened with so many other software companies including netscape, many of its employees or contributors saw that they could, in fact, do a better job and so started their own companies, as in how mozilla was born.
we can only hope this will be the case with mozilla: that many of its contributors will band together and divert from the mess that the current mozilla exec team has created.
oh by the way, ff 3.6.19 has suddenly started to crash more often, which i dont understand. and TB has started to freeze. hmmmmm......???????
if i changed browsers, i'd sorely miss personas & the many add-ons i use to customize FF & T B...making them it a much more functional than i ever could have hoped for. but each updated takes so much time & effort and so many add-ons are lost each time anyway, i would also lose that functionality anyway with mozilla. so what's the difference? NADA.
for years i have been an ENTHUSIASTIC SUPPORTER of all things mozilla, encouraging friends and coworkers to install and use it....often going out of my way to install FF & TB for many of them myself.
but as a result of the current "update" methodology by mozilla, i dont think updating FF & TB is worth it anymore so i stopped updating....both personally and professionally.
not only have i stopped recommending FF & TB, as the computer tech at an elementary school i no longer update FF or TB on the dozens of our existing computers that i previously installed them on and i no longer install it on our new computers. in fact, because the update situation in terms of add-ons has given some of my people such a headache, i have actually UNINSTALLED FF and TB on some computers...and, horror of horrors, they have actually gone back to microsoft internet explorer than risk what they have just gone thru with mozilla.
many on our staff are not so computer savvy so they depend on me for my computer advise and assistance.
each our classrooms has 2-4 computers, plus we have many more in our main offices, resource room, library, etc. we just ordered a 30-laptop mobile computer lab: i will make sure FF & TB are NOT installed on them.
our entire school campus has just had wi-fi installed. this will allow many on our staff to use their own laptops on campus. i will be discouraging them from installing FF or TB too.
JUST BECAUSE SOMETHING IS POSSIBLE DOESN'T MEAN IT IS THE RIGHT OR BETTER THING TO DO.
mozilla's exec team has failed to realize this...and for this reason alone i think they should all be sacked!!
just as some at netscape thought they could do a better job and formed mozilla, I PRAY some mozilla people will see the LACK OF MERIT in the current mozilla methodology and move out, starting a new browser company reinstating the functionality and sensibility that mozilla once had.
many developers can not keep up with this either....they also have lives, many of them very busy.
so this update method is unfair to developers and users. THIS ALL SPELLS INCONSIDERATION BY SMARTY-PANTS MOZILLA EXECUTIVE TEAM.
another problem at mozilla, getting more and more like evil microsoft in terms of DISALLOWING customer response.. i went to make a comment in another area, it would not even let me UNTIL I "UPGRADED" [if that's what it is] till the newest frustrating version. BOO HISS. BAD FORM MOZILLA
mozilla looks like it is replicating microsoft's outrageous methodology of updating its products AND treatment of consumers. but even ms doesnt do crazy updating too often. frequency of updating is way too much. OOOPPS....mozilla IS making the oft-hated microsoft look good. who could have thunk it.
or will mozilla end up going the way of netscape.......oblivion.
my frustration increases daily with mozilla's repetitious notifications to update to TB 6. not a chance until i can have MY michael b toolbar button add-ons.
as far as i am concerned the mozilla exec team has gone from stable & reliable to chaotic messiness. SHAME SHAME SHAME.

IPod updater/restore proble w/ latest 2006-06 version - FIXED

Alright kids peep this!
Background- have a Gateway 506GR running Winblows XP Home. Nothing special on it except I use both XPlay 2.0 and iTunes. Everything runs dandy. I have had 2 iPod Mini and a friend has a first gen Ipod U2 version. Updated them, restored them all gravy. Again, no probs...
SO, the wife gets a an iPod Nano... thats when the problems start kicking in. Plug it in and it says we need to update to the 2006-06 updater. Cool. I did it with my Mini so I think this will be easy breazy... WRONG. Muf*cking Nano keeps freezing up. Updater freezes up, restore has no chance. Seems that something is fouling up the system here. Also get the error that cannot write to drive "G", the nano removable drive, sweet!
I uninstall EVERYTHING - iTunes, updaters, XPlay, start up PC in safe mode, turn off firewall (ZoneAlarm), disable virus, remove MusicMatch... nothing. Tried to do the update /restore by manually putting the Nano in Disk Mode and still nada. Oh yeah, took it to the Apple "Guru's at the Stanford store and ValleyFair in SJ and they have NO CLUE. They try some simple fixes and of course get nowhere. They just end up giving me another. I went through 2 this way.
I got real desperate now. I search Google and found this - http://screwdave.blogspot.com/2006/05/ipod-nano-updater-3-23-really-needs.html and of course no dice there either. Maybe it will work for you.
OK, FINALLY peep out DSLreports, the cats there are freaking real GURUS man, and found some guy with the same issue as me. The guy tried EVERYTHING the forum was throwing his way and he had no luck. One casually mentions that he may have a power supply issue regarding the USB 2.0 ports on his PC. "Hmmmmmm", I think that this is just stupid enough to work. I go to Radio Shack and buy a crappy $20 USB 2.0 hub with an external power supply and plug it in. Removed iTunes, all the updaters, and Xplay and start from scratch. Re-install iTunes 6.0.4.2 and use update 2006-03, then re-install XPlay 2.9. Plugin the Nano and Whamo! it freaking works. Sweet.
Gateway 506GR Windows XP Winblows
Gateway 506GR Windows XP Winblows

Same thing happened to me (well my 30gb video iPod XD) And to a lot of people, apparently. My iPod has been comatose (I REFUSE to say it's dead) since Monday after the iPod Update. It's NEVER had problems before, so I lay the blame on the Update. It took forever to "update" (I had it in for hours) and when I finally dced it (prematurely apparently?? I don't know how leaving it in a couple hours and then taking it out makes it premature but okay iPod Updater...) it flashed to the Apple screen, which I then reset, and now it's in its comatose state
I have really nothing to contribute but to say it's happened to me, too XD I've had no luck at other threads so if anyone could help, it would be much appreciated Thanks

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

This is the best method to install a new version of Studio!

Do it cleanly. By this I mean create a new fresh startup disk for the install of Studio. Whether for Studio 1 ,2 or 3, trust me. this method will get you to a really stable FCS system.
1. Backup everything you want to keep if you're using the same drive you've been using as your startup disk. Clone it if you'd like to save time digging around for the files you want to keep. Or buy a new drive for your tower and use it as a startup disk, keeping the earlier one until you've transferred all you need from it. (I have no less than 3 startup disks for my single tower here) One is a 250 gig drive, the other two reside on their own partitions of a second physical drive. I use one system for beta testing, reinstalling the OS each beta test, and one "working" system for daily real work environments, and yet another "backup" system which is there just in case I need it. (but never really do actually).
2. Load your latest OS disk, and restart your computer from it holding down the c key during a boot up, or selecting it from the startup disk control panel in the apple system prefs.
3. Once your computer starts up from the OS disk, select "optional installs" from the button you'll see in the window. From there select "erase and install" and install will begin.
4. After the OS install, run Software update and go all the way with it. There's nada out there that's not OK to install.
5. Install Studio. If it's an upgrade version, no problem to not install the earlier version you're upgrading from. Just have it's serial number handy because FCS will ask for it as well as the upgrade serial number.
6. Run Software upgrade again to make sure all of your FCS apps are up to date. INSTALL EVERYTHING that Software Update proposes to install.
7. You'll be a very happy camper.. it will also feel like your whole computer is faster because of this clean install of the OS you did...
It's not impossible to get a fine upgrade done without doing it as I've described above, but with the latest round of problems being posted about a new install, I gotta say that this clean method will fix all the problems being posted here and elsewhere. Why even bother taking the risk? What I've posted above will be THE WAY to make sure you're system is running right.
I've espoused this method of install any time you upgrade your OS (i.e., Tiger to Leopard or the upcoming Leopard to Snow Leopard upgrades about ready to hit us all) OR any time you install a new version of FCS or even a FIRST install of the studio. It's not all that time consuming, and running pro level software really demands that the system install is totally clean.
I oversee about 75 FCS stations at the Colorado Film School, we do this clean install every semester (4 months) on the systems there, and really have incredibly stable setups. Never really having the problems that get reported all over the forums... not only that, they boot fast, run fast, and just work.
When software companies test new versions of their software in beta, it's always asked by all software manufacturers to install their beta over a clean fresh OS... always... so there's a lesson here to learn from them, and also a hint: nobody chooses the "upgrade" button for a new version of said software, rather they are testing over CLEAN installs only. Makes perfect sense then to install new versions of software as complicated as this is over a clean new OS install.
Jerry

I fully support Jerry's advice. Though it is a little like the old auto repair manual I once had. If you looked in the section under "clutch replacement", it started out like this ...
*Clutch Replacement procedure.*
• elevate car - be sure to use jack stands to support vehicle
• remove engine
• with clutch pressure plate exposed ....
Of course, they never spelled out all that was involved in the "remove engine" step. So, in the interest of adding more detail to Jerry's advice on the "erase and install" process for those who have not done it before and might be intimidated - read on.
• Make a list of all Applications to install. Which ones do you need? Go through your Applications and Utilities folder and note which ones you'll want to reinstall. Note the version.
(I don't know about you, but I had a shocking number of apps I downloaded, used for a few times and never used again. Forget installing these disused apps.)
• If you are upgrading from a PPC to an intel machine, you'll want to know if the apps are UB or PPC. Upgrading your PPC software to UB can be a significant cost in a PPC to intel conversion. Know what you are getting into - do a search before installation to see if there is a UB version available. You can find out whether an app is PPC or UB by looking in System Profiler>Software>Applications. This window will also tell you the current installed version number. Generate a .pdf file of it and have everything listed for your records.
• In the list, note whether is was a download or you have a disk. If it was a download, find the DMG or installer package and copy it to an external firewire drive. Put it in a folder titled - Apps to be installed - or something easily identifiable.
• If you need to go back to a previous version (e.g. QT 6.5.2) download the dmg file BEFORE you start the installation process.
• In the list, note if the application is a full install or an UPGRADE. If an upgrade, make sure you have the previous version's disks (as well as the serial numbers - see below).
If the UPGRADE version does not require the previous version to be present - eg when installing the upgrade version of FCP 7, DO NOT install earlier software. All you'll need is the previous serial number. The way to figure this out is to try to install the newest version. If it needs the previous version present before proceeding, the install process will tell you that.
Some upgrades will require that a version of the previous app is on the disk. If this is the case, when you install the first version, simply install the minimum so the app will be on the hard drive. You will need to do this because there will be NOTHING on the disk after you do your clean erase.
• Referencing your list, find ALL your disks before you start. This includes previous versions if you are unsure whether they will be needed.
• Spend some time looking through this forum for Professional Application installation issues. The classic example is a conflict between Logic and FCP. Install FCP first and you'll have no issues.
• Sort your list into an installation sequence. Lay out your disks in that order.
• Referencing the list, make sure you have ALL your serial numbers including those you've downloaded. I've purchased a number of programs on line and the only documentation of the serial number was an email. All those are kept in a dedicated folder in Mac Mail. For serial numbers that arrived via electronic means, use cut and paste instead of re-typing whenever possible. This will prevent errors in transcription.
In making the list, TEXT EDIT works ok, (I use Excel). Text edit has the benefit of being easily readable on any mac. Print the list out for reference, put a copy on a flash drive or a firewire drive where you can access it to cut and past serial numbers during the installation process.
• Recognize this is going to take some time. Ranting, drinking too much coffee, swearing, sitting in front of the computer watching the progress bar, etc will not make things go faster. All it will to is put you in a really bad frame of mind. Do it over a weekend when you can be multitasking. While you are cleaning off the mountains of paper on your desk or raking the yard, you can take regular breaks to check on progress.
Process -
• Download Carbon Copy Cloner or one of the other backup utilities and do a full backup of your existing system drive to an external firewire drive. Make the drive bootable. *Do not* cheap out on this as this is your insurance policy. If you forget something or can not find a serial number, you often can find it and copy it from the backup system to the newly installed version. Or, if things go horribly wrong, you can simply copy the old system back to your computer and pick up where you left off.
If you have a MacPro or G5 tower, an alternative to cloning your existing system disk is to pick up a new hard drive to use as the clean new system disk. Your existing system disk will be the clone.
• Once you have gathered and organized all the materials and backed up the drive or installed the new system drive ...
• Insert your OSX installation disk and boot the computer from the disk (Jerry explains how)
• Erase the hard drive. Use the ZEROs option as this will map out any bad sectors. This will take time. See the note above.
• Install the OS. If it is an upgrade install, see the note above regarding upgrade installs. Repair Permissions and then run the updates. Repair Permissions.
• Install your applications following your list. Make sure to Repair Permissions after each install and update..
Have fun, be prepared for a few minor glitches. If you multitask, you can get the garage/ or office cleaned out and your computer rebuilt. In all honesty, this process took all weekend plus time in the next week as I discovered apps that needed additional updates, configuration settings, etc. No doubt it would have been faster if I was sitting at the console the whole time, but I was able to get the office cleaned up and organized (which also makes ME much faster). Overall it was a very slick process.
When you have a fully functioning system again (you have tested all applications and everything works), CLONE the new system and put your info, your notes and the disks in a safe place - once you've done this once, why go through the pain of organizing this stuff again ...
Now, rejoice in a much faster machine with a lot more free disk space.
Cheers,
x

Msg: "No compatible version of Java 1.7+ is available"

Hi,
I recently upgraded my mbp to Mavs. Most everything owrking fine, but trying to launch a certain software I get the message, ""No compatible version of Java 1.7+ is available."
I know nada about Java.
Typing 'java -version' into Terminal I get:
java version "1.6.0_65"
Java(TM) SE Runtime Environment (build 1.6.0_65-b14-462-11M4609)
Java HotSpot(TM) 64-Bit Server VM (build 20.65-b04-462, mixed mode)
Does Mavs run 1.7?
Any info on what it means or suggestions on what to do?
best,
elmer

Thanks!
Just criously, how come I don't have a Java icon in System Preferences? I thought 10.7 and up are supposed to have it.

ST-PI nad ST-A/PI VERSION

Similar Messages

Maybe you are looking for