ST-QCA: SAP Quality center adaptater

Hello,
I would like to test integration between Solution Manager 7 SP14 and Quality Center 9.2 but I need to install the addon ST-QCA.
This addon is supposed to be on the software download area (SAP ADAPTER FOR QC 1.0 is released since the 02.07.2007), but I cannot find it.
Could someone tell me where to find it, or send me the addon?
Thanks, François.

The documentation I received on the 2 way adapter states that you must be at least Support pack Stack 15
Download KITLEBA.SAR from the Marketplace
Review Note 1109650 for installation
Review Note 1059350 for Configuration
Maybe this will help

Similar Messages

SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
Marco

Hi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini

How to configure SolMan for interfacing with SAP Quality Center

Hello everyone,
Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
Can I find better documentation elsewhere?

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

How do i start doing SolMan integration with HP Quality Center?

Hi guyz,
I am new in this SAP field with zero knowledge on it and my first task being assigned to me is to integrate SolMan with HP Quality Center. So how do i start? What do i need to know before doing the integration? As iI know by far SolMan need to have QC adapter to communicate with HP Quality Center. What is the adapter anyway? Correct me if i'm wrong. Really need you guyz expertise on this. Thanks.

Hi,
The SAP Solution Manager Adapter for SAP Quality Center by HP is an interface between
SAP Quality Center by HP and SAP Solution Manager. SAP Quality Center by HP extends
SAP Solution Manager testing capabilities u2013 together they achieve a full integration of test
people, test processes and test data in the SAP Solution Manager Application Management
Platform. The integration on SAP Solution Manager side is realized via the SAP Solution
Manager Adapter for SAP Quality Center by HP.
After installing the Adapter, please check the Note: 1285941 for the installation of EIM versions and Solution Manager versions.
Please refer how to guide in Learning Maps.
https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706460&_SCENARIO=01100035870000000202&
We have to check for the activation of SM_QC_AD Enterprise Addon from IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate
Solution Manager Enhancements.
Then follow the IMG activity transaction spro: Scenario Specific Settings-> Third Party Integration-> SAP Quality Center by HP-> Integration Test Management & Integration Defect Management.
Hope this helps.
Thanks,
Raghavendra.

Quality Center/Solman configuration help

Hi. We're having some issues with our Quality Center/SolMan integration. We had it set up and working, and now "something" changed but we're not sure what, and our QC guru quit a few weeks back
We seem to be having authorization issues, but we're not sure where the config issue is. We have a user trying to push data from the Solman instance to Quality Center - when we look in the QC App server log, we see this.
com.hp.erp.ei.service.sm.base.exceptions.AuthorizationException: User is not authorized to perform the action PushBlueprintAction
the user is an admin on the QC system, the ID that was initially configured in Solman to handle the transfer also 'seems' to have the correct permissions. Where do we need to start looking to solve this?
What other information can I provide to help this out?
Thanks!
Bernie.

Hi Bernie Krause
1. Please check this back group communication user is not get deleted:
SAP_QC_INTERFACE Authorization for background communication user
2. check this also:
SAP Quality Center by HP
See IMG activity: Information and
SAP_QC_BY_HP_ADMIN Full authorization to configure, send and receive
data to/from Quality Center; needs to be assigned
additionally with respective role for Implementation
3 Did you check the Security guide under the communication channel
Solution Manager to Quality Center by HP uses following protocol SOAP
For more accurate details go to : https://websmp207.sap-ag.de/securityguide
you should be fine...
Regards,
Santosh Asuthkar

Solution manager adapter for HP Quality Center

Hi All,
We want to use Solution manager adapter for HP Quality center. Can you please provide some documentation/information regarding it's installation prerequisite, installation process and Licences.
Regards
Vivek

>
vivek b wrote:
> We want to use Solution manager adapter for HP Quality center. Can you please provide some documentation/information regarding it's installation prerequisite, installation process and Licences.
As a first overview:
[SAP Solution Manager Adapter for SAP Quality Center by HP |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000725149&_SCENARIO=01100035870000000202&]
Best regards,
Ruediger

Connecting solution manager to Hp quality center

Dear friends ,
could someone please give me the steps involved in connecting Solution manager to Hp quality center to be used for testing purposes , any documents or links describing this configuration will be greatly appreciated
thanks
Harsha

Hi Harsha,
Check Note: 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
Here you will find all the steps required.
Thanks & Best Regards,
Raghavendra.

HP Quality Center Adapter ST-QCA

We've just installed solution manager 7.0 ehp1 sr1 and hp quality center.
Is the adapter a separate purchased product for solution manager?
Do I need to purchase and install ST-QCA in solution manager?
Thanks,
Daniel

Is the adapter a separate purchased product for solution manager?
Do I need to purchase and install ST-QCA in solution manager?
The adapter works on 2 fronts, the SAP side and the HP side.
The SAP Interface is free, and can be downloaded from the marketplace however, HP will sell you the Enterprise Integration Adapter which has to be bought along with BPT licenses if you decide to implement automated testing using Quick Test Pro and SAP TAO.
Hope that helps
Cheers!

How to test the SAP modules like SD and MM By using Quality Center and QTP

Hi Experts,
How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
Regards,
Skumar.

Hi Sampath,
First install QTP and SAP Addin with in QTP.
2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
Once recording is done QTP will create a script in VB
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SAPGuiOKCode("OKCode").Set "/nVA01"
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SendKey ENTER
you can always add a parameter and other customization according to your requirement.
Let me know if you need more information regarding this.
Good Luck!

Using Quality Center (v9.0) to automate testing in SAP- questions/guidence

Hi,
First time on the expert forums for me. Hope you are able to help provide some guidance on this area for me.
Overview is our client is looking to fully automate testing in SAP for patches/upgrades/new developments by using Quality Centre v9.0 (which was implemented for test management as part of upgrade to SAP ERP 6.0)
I am starting to investigate this for them and looking for some answers on queries I have / guidance on whta is required to meet this objective.
- I have read mention of "SAP Quality Centre". Is this different to HP Quality Centre that we currently have installed? If it is different to HP QC do you need the SAP Quality Centre version installed to be able to automate the testing? Or is SAP QC if you just want to do it stand alone without using Solution Manager?.
- To automate testing in QC 9 is the implementation of SAP Solutions Manager required to enable it?
- Are other tools required to be implemented to enable the automation of testing in SAP ERP with HP Quality Centre ? eg for the process modelling (I read about the use of ARIS earlier?) or is the modelling done in SAP Solution Manager functionality?
- Is there qa brief overview anywhere on SAP or HP site that states the steps to automate the testing. eg Is the detail in QC for the transactions/parameters to use for each test or is this in SAP Solution Manager/Modelling tool? Also effort required in the implementations that are required (application wise) and effort required to get tests set up to the level required for the automated testing.
Any help/advice is greatly appreciated. As you can tell I am coming at this form a point of nearly zero knowledge on how it all fits together/effort required.
Thanks

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

Are you utlizing SAP's Quality Center with Integration to Solution Manager?

Hello,
I am interested in hearing from folks who are utilizing SAP's Quality Center with or without Integration to Solution Manager. Please post your experience on setting this up and realizing the benefits, i.e. efforts involved, what features of HPQC you are using, is it a good tool to use for integrated SAP testing etc.
Thanks in advance for your help!
Abu

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

SolMan integration with HP Quality Center

Hi Friends,
Is there any way by which we can integrate Solution Manager with Mercury Quality Center?
Please let me know.
Thanks,
Rock

Hi Rock,
The short answer is - yes, you can, after buying a 'Adapter' that SAP sells.
I am not sure if you have already seen some relevant pages and still have this doubt. In any case, I have listed some places where you would find relevant literature.
(1) http://service.sap.com/rkt-solman
In the above link, after supplying your OSS ID and password, you have access to various training documents. One of the links contain SAP Tutor and PDF files on this subject.
(2) For Adapter information, please got to the following link:
http://service.sap.com/upgrade
Click on Product Availability Matrix and then search for Adapter QC in Quick Search for Product Versions box.
You would get a window message that confirms that the Adapter is made available by SAP since 13.03.2008
(3) You also find some more information from 'Online Help' section on Solution Manager
Trust this helps.
Regards,
Srini

BW and HP quality Center Report Error

Hi ,
We have installed BW7.0 and EP 7.0 . Testing are running from Load runner with HP quality center. It is running some time properly and last minute we are getting error.
Basicalley performance testing is we are doing on the sap systems.
Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions
Can some body help on this??
Regards,

Hi,
Any ways we can get the log of the error to see here.
Also see for replicating the problem couple of times, check the log if its different for different tries please paste all those logs here.
Regards,
Ravi

Hp Quality Center Adapter for Solution Manager two-way

We just recently installed the SAP Adapter for Quality Center 2.0. The installation worked to the point of sending requirements to QC but when we try to send test results to Solman we just get a "In progress" and it never completes.
We reviewed the QC logs and we don't see the url information for Solman in the log. It just blank. Does anyone have any idea of what the issue could be.

Hi
I'm actually in a project where we want to integrate SAP SolMan Stack 18 (EHP1) with HP QC 10.0. So, to my knowledge, we need to have from SAP the SAP Adapter for QC 2.0 (which you have installed) and from HP the HP Enterprise Integration Release 2.0.
My problem now is, that I can't find anywhere on sap.com this SAP Adapter for QC 2.0. There is only 1.0 available.
So, as you can imagine, I would be very eager to know where you got this Version 2.0?
At the moment we got, officially from SAP, this name form a responsible in India who we should contact and nothing else.
Thanks for clarifying and helping.
Thomas

Quality Center Adapter - Connecting Multiple Solution Manager Systems

We are running Solution Manager 7/Enhp 1 and Quality Center 10 successfully using the Quality Center Adapter integration. My question is, can we connect multiple Solution Manager systems (i.e. SMP/SMS/SMX) to a single Quality Center server simultaneously? Or is there a one-to-one relationship restriction. Thanks.

I have answered this question in this post below:
http://forums.sdn.sap.com/thread.jspa?threadID=2110531&messageID=10962875#10962875
To quote myself
Each tie up is based on the logical ports at the Solution Manager end and the relationship between the two entities is between Projects. So if you set up the configuration like you would in a normal scenario and at the right moment, connect the projects in SolMans to the corresponding projects in HPQC, you should be fine.
Hope that helps.

ST-QCA: SAP Quality center adaptater

Similar Messages

Maybe you are looking for