ST03, RSDDSTAT and 0BWTC_C10

Hello,
I wonder how the performance data of table RSDDSTAT, transaction ST03
and statistics cube 0BWTC_C10 relate to each other.
When I check what kind of SQL statement ST03 -> BW System Load produces
I get a simple query for table RSDDSTAT. When I perform the query myself,
I get different results than what I see in ST03.
For example, ST03 shows 205.126 navigational steps in November 2007.
Checking which SQL statement was executed via ST05 and performing
exactly the same select myself on Oracle I get 218.171 navigational steps
from table RSDDSTAT.
To make things really complicated, when I create a SAP Query
and select the data from InfoProvider 0BWTC_C10 I only get 182.477
navigatonal steps in November 2007.
How can such differences be explained?
Regards,
Mark

Hi Mark,
Difference in the performance can be explained in ST03.
ST03 clearly explains you about how much data transfered and how many records retried in the query.it also tells you how much time it taken to open a particular query.
You can also check in the table RSAGGRRDIR
Regards,
Lakshman.G

Similar Messages

  • Query Performance (ST03, RSDDSTAT etc)

    Hi BW gurus,
    I have a huge query runtime problem and I need to fix that immediately...
    I went to RSA1-> Tools-> BW statistics for Info... then I goto ST03 and in expert mode I tried to find my Infoprovider its not there...do we have to install the Business content statistics cubes in order to analyse the query run time
    also how do we do the analysis in RSDDSTAT table.
    Also is there any other way to increase the performance of your query .in RSRT ?? ..I have been refering many docs not of much help....
    Thanks

    RSDDSTAT is the key table.
    Do you collect BW statististics for the info providers. If not, start collecting them.
    RSA 1- extras - BW statistics for info providers - check both OLAP and WHM boxes and activate.
    Also, you need to activate the BW statistics cubes and the data flow.
    Quickly you can run RSRT and explore other possibilities.
    Ravi Thothadri

  • Missing Server and Datas in Workload Monitoring - ST03

    Hi,
    I tried to monitor workload using tcode ST03. But I am unable to see the server and datas for the same.
    Can anyone help me how to configure or assign server in ST03.
    thanks and regards
    Jaya Ganesh

    Hi Mike,
    Thanks for the reply.
    I have checked the BG job SAP_COLLECTOR_FOR_PERFMONITOR. its working fine in a hourly basis. and checked the reports concerned to the job. everything is fine.
    The problem is I am not able to see the server or instances in workload list. How do I assign it or add it.
    Help needed in this regard
    thanks and regard
    Jaya Ganesh

  • Purpose of ST02, ST03, ST04

    hi,
    Whats the Purpose of ST02, ST03, ST04. and what exactly we can do witg these T-codes
    Regards
    Ganesh

    Hi Ganesh,
    This transactions are statistic transactions, ST02 show you the memory utilization and buffers, ST03/ST03N show you the performance of the processes, ST04 is the SQL Server Database Monitor.
    Hope this help!
    Juan
    Please reward with points if helpful

  • Please solve a mystery for me involving the Reporting Analysis View in ST03

    Greetings to All,
      Happy 2008 to everyone!  We are trying to improve query performance.  I have found lots of helpful documentation telling me to use ST03.  All of the documents have instructed me to use the following navigation:
    1.  Run ST03.
    2.  Choose the Expert user mode.
    3.  Choose the period to be analyzed in the BI Workload tree.
    4.  Under Analysis Views, choose the profile Reporting. 
      HERE IS THE MYSTERY: my screen does NOT display a profile called "Reporting".  We cannot find it anywhere on the screen.  What am I missing?  Any assistance would be greatly appeciated! 
      We are using SAP NetWeaver 2004s.
    Thanks,
    Sarah-Jane

    u can discuss this issue with ur basis person or security person at ur firm.
    xplain them that u wanna use st03 transaction
    and authorization is getting faile
    xplain them u r not able to see any data...
    discuss the possible option.
    try to use st03 from other user id ... if u can get it ... ur colleague or just bother them and see the st03 result at their pc
    if it bring s the result to their pc then for sure u have authorizaiton problem.....
    as the authorization objects are maintained differently at each company i am not sure about how it works at ur place....
    (authorization is nothing but for each transaction and for acess to each transaction and several data providers, authorization objects are created for each of them and then they are assigned to ur user id...... for eg. sarahjc    now if there is some st03 authorization objects are there and if they are not assigned to ur user id , then they must if u wanna use that transaction.....)
    u can check authorization object to ur user id by using transaction SU01.... and if u know that someone else is getting result in st03 transaction then using su01 u can compare authorization objects to each user id and analyse what is missing ....

  • Application not displayed in st03

    Hello,
    Recently we have restarted our production, while restarting one of our application server (Dialog Instance) did not came up due to some problem at OS level.
    Now the problem is solved and the app server is up now.
    But when I see in st03 I couldn’t find this app server entry in that.
    Can any body tell me how this will be appeared in st03.
    And one more thing this is displayed in os07.
    Regards,
    Sekhar Reddy.

    Hello Markus,
    You are grate I have seen you answering may questions.
    All the best.
    Regards,
    Chandra

  • Extracting PAGEID and Text Description from Statistics cube

    Hi SDN Community,
    Can anyone please confirm that the following approach to extract the PAGEID and its text is the only way to do so:
    As i cannot find the PAGEID field in any of the 0BW* statistics cube, we will create an infoobject and add it to one of the cubes.
    Then Map PAGEID from RSDDSTAT to Field: OBJID from Table RSZWOBJTXT
    (This mapping between the tables RSDDSTAT and  RSZWOBJTXT can then be used to retrieve the web page description from the field TXTLG)
    Thank you for your assistance.
    Simon

    The PageID is not in the statistics cube

  • Workload and Performance Statistics

    Hi Experts,
    I am viewing Tcode 'ST03' - Workload and Performance Statistics. In the Memory View of ST03 I see a row with a report called 'Upd Ctrl'. Now this is neither a report or a transaction in our system. However it is consuming some dialog steps.
    Any idea what is it?
    Thanks and Regards,
    Ravi Bhatnagar

    Hello,
    How long have you been runnign the EWA reports for the systems int he solution?
    The reason I ask is that it tskes 4 weeks to build short term history and 12 weeks to build mid-term history.
    History is used for trending.
    It may be possible that what you are missing is the history and the trending cannot be generated until there is 4 weeks
    history. If at 4 weeks you still don't have trending there may be some other issue, but if you just started, and have not had at least 4 weekly runs, you just may not have accumulated the history to provide trending data yet.
    Hope this helps. If not, have you examined the EWAfS at the Service Session level, as therer may be more information
    there to illumonate the problem?
    Regards,
    Paul

  • Unable to  drill down and see the options in  DBACOCKPIT

    Hi All;
    I am unable to drill down any of the options in DBA COCKPIT.i am able to view st03,st04 and database backup is fine even in db13.Let me know what can be done to to do configuration of DBA COCKPIT and if i click configuration am unable to do anything with active and inactive systems
    Below is the error am getting::
    Object CL_DB6_SYS: Method call GET_FIRST_AVAILABLE_SYSTEM failed with return code = System not found.
    Message no. DB6PM001
    Regards
    Ram

    Hi, Make sure you have the latest DBA Cockpit Collection version installed via transaction => snote.
    1456402 DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
    regards

  • DB02 Space Statistics - how to change interval and measurements?

    In DB02, Space Statistics history, how do we change the interval and/or number of measurements?  Ours seems to be lagging a week behind.  We run update job once a week on Thursday night.  Right now DB02 shows current data run on 5/18/06 but history stops at 5/11/06.  We would like history up through 5/18/06.  Is that possible?
    TIA,
    Margie Teppo
    Perrigo Co.

    The frequency of the file statistics collection can be controlled through ST03 -> Collector and Performance DB -> Performance Monitor Collector -> Execution Times. For the table history, you need to loook at the entry for report name RSDB_TDB (in older releases: RSORATDB). If the setting is correct, you should check the job logs of the job SAP_COLLECTOR_FOR_PERFMONITOR at the time when you were expecting the collection to run. You can also submit a manual collection through DB02 -> Refresh File Statistis (Background). This will submit a job RSDB4090, and if you don't get the history data as expected, you should check its job log for potential errors. If this doesn't solve your problem, you can open a customer message for SAP, so that the SAP support can look at your system.
    Kind regards, Christian Bartels.

  • Statistics report helpu0085

    Dear all,
    I’ve been requested to generate a statistic report to view the most number of reports being generate and possibly further drill down by users. Is this possible and if it is, how should I go about getting such report for my boss?

    There is a wealth of information of this nature in the BW statistics content.  There is information about this in the online help under "BI content".
    Furthermore, transaction ST03 > Expert Mode > BW statistics load provides information of this nature, but is not as rich as BW statistics.
    In BW 3.x, the tables RSDDSTAT and RSDDSTATAGGRDEF are utilized as datasources for the BW statistics content.
    Note that this entire area has been re-designed in BI in SAP NetWeaver 2004s; BI statistics content is much more sophisticated, and the administrator cockpit uses this content to provide advanced monitoring and analysis.
    Thanks for any points you choose to assign.
    Regards -
    Ron Silberstein
    SAP

  • Aggregates Question (Performance) Please Help

    I have 2 Questions first one is
    <b><i>1. Its been mentioned in the Forum that we can anlyse in the workload Monitor (ST03N) i went through that and did not find any Data for anlysis rather its showing information for Load Analysis.</i></b>
    <i><b>2. Its been mentioned that we also check in RSDDSTAT table contents i checked this table but could not find data (How this table is Populated)</b></i>
    When i checked in
    <b>InfoCube Manage Screen --> Performance --> Check Statistics (Refresh Aggregate Statistics)</b>
    What are these for?
    Can we Analyse to create aggregates or not with out BW Statistics data and just checking ST03N and RSDDSTAT and RSDDAGGRDIR tables?Please Help Me
    I am using BI 7.Points will be assigned (Thanks)
    Message was edited by:
            SV S
    Message was edited by:
            SV S
    null

    Hi,
    For ST03N
    From Document
    BI Administration Cockpit and New BI Statistics Content in SAP NetWeaver 7.0
    As of SAP NetWeaver 7.0 BI, transaction ST03 is based on the Technical Content InfoProviders (unlike prior releases). Therefore, using transaction ST03 for BI Monitoring requires the Technical Content to be activated and to be populated periodically with statistics data.
    So, looks like you have to install the new statistics technical content.
    From thread /message/3461465#3461465 [original link is broken]
    Rajani Saralaya K   
    IN BI 7.0, ST03n is based on BI Statistics cubes, so unless you install these cubes and schedule the dataflow you cant see any result in there. Even the same thing is mentioned in the note 934848.
    For information about RSDDSTAT,
    see /message/3627627#3627627 [original link is broken]
    Raj.

  • How can i choose charecteristics while building aggregates on zsd-c03

    Hi Experts,
    I would like to build aggregates on my sales infocube. In this infocube having 6 dimensions,
    When we are building aggregates on characteristics how would i know on which characteristics want to choose for aggregates is there any t.code to measure size of the dimension.
    Can you please share you valuable ideas.
    Regards
    Siri

    Hi
    Genrally when we create aggregates ,we will follow some guidelines.
    1.If aggregation is more than 10
    2.If DB ratio is morethan 30.
    We can check these in the following t_codes
    ST03,RSDDSTAT& RSRT
    When we create aggregates,u will get popup whether to create urself or system proposals.U can get info from system proposals also.
    Assign points if useful.
    Regards,
    Hari

  • Queries in BW system

    Hi
    I'm get some more information on Queries in BW system.
    1. How many queries run on daily basis and how many queries run in parallel. Is there way to find out it? I checked with table 'RSDDSTAT' and it is hard to understand from there. I don't understand the starttime format '20.080.730.140.839,1668870'. I try with 'RSRT' and got the following information:
    STATUID -
    > 4ANJOK50HR3QGQ0P7JSI14QWA
    SESSIONUID -
    > 4ANJOKCP0PPFZCK5DDUUB6PM2
    NAVSTEPUID -
    > 4ANJOKKDJOB5HZ3LJ7X6L8OBU
    INFOCUBE -
    > 0COOM_C02
    HANDLE -
    > 1
    QUERYID -
    > 0COOM_C02/Y_0COOM_C02_QW003
    UNAME -
    > NAGI_A
    QNACHLESEN -
    > H
    OLAPMODE -
    > 1
    QRUNTIMECATEGORY--> 5
    QNAVSTEP -
    > 3
    QNUMOLAPREADS ---> 1
    QDBSEL -
    > 229.497
    QDBTRANS -
    > 3.819
    QNUMCELLS ---> 3.156
    QNUMRANGES --> 72
    RECCHAVLREAD --> 264
    QTIMEOLAPINIT ---> 0,214844
    QTIMEOLAP -
    > 0,414064
    QTIMEDB -
    > 3,191406
    QTIMEVARDP -
    > 1,589844
    QTIMECLIENT -
    > 0,062500
    TIMECHAVLREAD --> 0,144532
    TIMEREST -
    > 1,660156
    DMTDBBASIC -
    > 3,125000
    STARTTIME -
    > 20.080.730.140.839,1668870
    is there any link to understand all these above mentioned parameter?
    2. I have checked in our system that some of queries access the data from ODS instead of infocube. Is there any benefit to run the queries in ODS instead of infocube? In our company, BW application team execute one query to access the data from ODS. I don't know the reason for it.
    3. With 'RSRT', we can execute performance information for infocube. is there any tcode or tool to check the performance of queries that access the data from ODS?
    Thanks
    Amar

    Hi Amarjit,
       The choice of ODS or cube for reporting depends upon your requirements. It depends upon several factors like the details in which you want to see the reports, the amount of data you will be looking at etc. Since ODS is a flat structure (transparent table), you can not store large amounts of data. If you want to see some reports which contains data for several years (huge), you are better off running a report on a cube. Otherwise, reporting on ODS is ok. It all depends on your requirement.
    Refer:
    [Re: ODS Reporting]
    [Difference between ODS & Cube Reporting]
    [ODS vs Cube reporting;
          Hope this helps you.
    Regards,
    Yokesh.

  • Orasso.wwsso_audit_log_table_t access

    When trying to run the following query from an APEX application as the APEX schema owner of the workspace, I always get No Data Found.
    select user_name,
    log_id,
    log_date,
    ip_address,
    action,
    message
    from orasso.wwsso_audit_log_table_t
    where user_name = :P26_USER_NAME;
    I cannot figure out the grants needed to make this work. It seems like there is some kind of behind the scenes fine grained access control, but for the life of me, I can't find it. Any help would be greatly appreciated. I'm actually trying to run the above query against the wwsso_audit_log_view, but since the table doesn't work either, I figured I'd start there.
    Kris

    If i understand your question correctly, you want to find out tcodes accessed by a user in a particular time. You can get this information from st03  --> User and settlement statistics --> User profile.

Maybe you are looking for