ST03N does not current day statistics
Hi all,
We've just graded our system from 4.6C to ECC6.0. However, when we execute ST03N, it does not show the current day statistics. It will only shows 2 days ago statistics, that is, on 29th Dec it shows statistics up to 27th Dec and on 28th Dec it shows stat up to 26th Dec.
We've checked all collector jobs are run successfully with no error.
Anybody has any idea on how to resolve this problem.
Points will be rewarded with solution.
Thanks and regards,
Mei Ling
Hello Mei Ling,
most probably the time zone settings in client 000 is not correct. <a href="http://service.sap.com/sap/support/notes/926290">Note 926290</a> describes this problem.
Regards, Michael
Similar Messages
-
ST03N does not show reporting statistics
Dear all,
For a NW04s BI7.0 system I am asked to setup the technical content for BI statistics. As stated in this forum, ST03N now uses the InfoCubes to display the statistics instead of tables like RSDDSTAT_OLAP and RSDDSTAT_DM.
I have activated all business content for the statistics and I have loaded the cubes with data using the process chains, but there are no reporting statistics available in ST03N.
When I choose "BI workload", I only see "Load data" and "Process Chains" under "Analysis Views" tree, but no "Reporting".
Does anyone know how to make the reporting part visible in ST03N?
Thanks in advance,
Steven GrootHi Steven,
Our system has the following components:
SAP_ABA 700 0011 SAPKA70011 Cross-Application Component
SAP_BASIS 700 0011 SAPKB70011 SAP Basis Component
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B PI_BASIS 2005_1_700
SAP_BW 700 0012 SAPKW70012 SAP NetWeaver BI 7.0
BI_CONT 703 0005 SAPKIBIIP5 Business Intelligence Content
Based on this, I would think you do not need to apply any newer support packages, SP12 should be fine for BI Content patch level 5.
2-3 months ago when we applied patch 5, also 7 was available but our Basis person said we cannot go for 6 and 7 as those would require applying newer support packages as well.
Unfortunately I have no other idea on how to solve the problem that you have. I just know that I had lots of problems with BI content 703 with no patches and 80% of these problems have disappeared with patch 5.
Please keep us posted if you manage to solve this issue any way.
Thanks and regards,
Csaba -
ST03N does not show Infopackage statistics
Hi all,
For a NW04s BI7.0 system I am asked to setup the technical content for BI statistics.
I have activated all business content for the statistics and I have loaded the cubes with data using the process chains, but there are no Infopackage statistics available in ST03N.
Does anyone know how to make the Infopackage visible under "Load data" node. I can able to see DTP under "Load data" node but not the infopackage. I have checked all the steps twice to make sure everything is correct.
FYI: Reporting,Process Chain and Load data(only DTP) nodes are visible under "Analysis Views" tree.
I am just wondering why the Infopackage statistics is not visible under the Load data node.
Any inputs will be highly appreciated.
Thanks
AkyHi......
Sorry.....but I never face such a situation........
Still check this.........If this help you........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8733d190-0201-0010-239a-e428b16b2809
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Regards,
Debjani....... -
ORA-12514: TNS:listener does not currently know of service requested
While connecting "sqlplus SYSADM/SYSADM@HCM" I am getting the below error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Installation background:
Windows 7 l(64-bit) laptop.
Created linux virtualbox to installl peoplesoft VM templates.
so far installed: Oracle11gR2.vdi and HCMDB.vdi on the linux virtualbox.
Followed the steps exactly what it is in the link below: Got the above error in page 4 of the link at connecting to database via sqlplus.
http://bloggingaboutoracleapplications.org/running-oracle-vm-templates-oracle-enterprise-linux-guide-part-1-7/
Below provided initHCM.ora, tnsnames.ora, listerner.ora and some responses I tried. I could not figure out what causing the issue even after researching in web.
Your help would be highly appreciated.
tnsnames.ora:
=============
# tnsnames.ora Network Configuration File:
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM)
Listener.ora:
=============
# listener.ora Network Configuration File:
/u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
initHCM.ora:
============
DB_FILES =256
OPEN_CURSORS = 1000
db_block_size = 8192
remote_login_passwordfile = NONE
undo_tablespace=PSUNDOTS
NLS_LENGTH_SEMANTICS=CHAR
# Cache and I/O
#db_block_size=
db_file_multiblock_read_count=16
# Database Identification
# db_domain=us.oracle.com
# db_name=
# Diagnostics and Statistics
#background_dump_dest=
#core_dump_dest=
#user_dump_dest=
# Job Queues
job_queue_processes=10
# Processes and Sessions
processes=150
# SGA Memory
sga_target=287309824
# Security and Auditing
#audit_file_dest=
#remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=95420416
# System Managed Undo and Rollback Segments
undo_management=AUTO
#undo_tablespace=
unnestsubquery=false
# Miscellaneous
compatible=11.2.0.2.0
control_files=(/u01/app/oracle/oradata/HCM/control01.ctl)
DB_NAME=HCM
[oracle@hcmdb91 ~]$ tnsping hcm
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
07:40:37
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
HCM)))
OK (20 msec)
[oracle@hcmdb91 ~]$
[oracle@hcmdb91 ~]$ tnsping hcm
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
07:40:37
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
HCM)))
OK (20 msec)
[oracle@hcmdb91 ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:41:32
Copyright (c) 1991, 2010, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
[oracle@hcmdb91 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 28-MAR-2013 07:29:21
Uptime 0 days 0 hr. 13 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File
/u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
Listener Log File
/u01/app/oracle/product/11.2.0.x/db_1/log/diag/tnslsnr/hcmdb91/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hcmdb91.example.com
)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully
[oracle@hcmdb91 ~]$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:44
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@hcmdb91 ~]$
[oracle@hcmdb91 ~]$ sqlplus SYSADM/SYSADM@HCM
SQL*Plus: Release 11.2.0.2.0 Production on Thu Mar 28 07:44:25 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in
connect descriptor
My guess is that the database service "HCM" is not up and running but not sure how to make up and running. Even I could not find it listed in the linux services list.
Note: Able to login sqlplus using "sqlplus sys/sys as sysdba" but failing to access database table as "select * from PSRECDEFN;"
thanks
Espii.
Edited by: 995437 on Mar 28, 2013 6:52 AM
Edited by: 995437 on Mar 28, 2013 6:59 AMHi Nicolas,
I have no luck and the error still persists.
I have set the "export ORACLE_SID=HCM" from root user and oracle user too.
I guess, I have already loaded database when I ran the "cd /opt/oracle/psft/vm
./oraclevm-template.sh"
The outcome of the above script as similar as below:
Creating
ovm_configure_pre
CreateVirtualEnvironment
/u01/scripts/db-reconfig.sh: line 238: ovm_set_password: command not found
/u01/scripts/db-reconfig.sh: line 239: ovm_configure_network: command not found
INFO:
Starting Oracle database reconfiguration.
Oracle Database Configuration
This will configure on-boot properties of Oracle Database.
The following questions will determine whether the database should be
starting upon system boot, the ports it will use.
Press <Enter> to accept the defaults.
Do you want to relink binaries? (y/n) [n] y
Specify a port that will be used for the database listener [1521]:
Do you want Oracle Database to be started on boot (y/n) [y]:y
Wrote to /etc/sysconfig/oracle11g
Relinking Oracle Binaries...
Oracle Relinking Completed Successfully
Logs: /home/oracle/relink.log
Running orainstRoot.sh and root.sh...
set 2GB tmpfs
Enabling Oracle Database service
Configuration Completed Successfully.
Enter the name of the database SID [TESTDB]:HCM
ORACLE instance started.
Total System Global Area 288104448 bytes
Fixed Size 2225832 bytes
Variable Size 104859992 bytes
Database Buffers 176160768 bytes
Redo Buffers 4857856 bytes
Control file created.
Database altered.
Tablespace altered.
Tablespace altered.
Tablespace altered.
1 row updated.
160 rows updated.
Commit complete.
Kumar - I have found no sqlnet.ora file exist in the $ORACLE_HOME/NETWORK/ADMIN
Edited by: 995437 on Mar 28, 2013 9:15 AM -
Listener does not currently know of service request in connect descriptor
Hi experts,
Am new to the oracle database, I cannot able to connect my database while i try to connect database the error was flashed
*1. Error while connect the database*
SQL*Plus: Release 11.2.0.1.0 Production on Fri Nov 9 09:33:39 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: sys@giis64 as sysdba
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:*2. TNS Ping*
C:\>tnsping giis64
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 09-NOV-2
012 09:58:28
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
c:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = WIN-M1R2
SQYZTHI)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = giis
64)))
OK (0 msec)
C:\>*3.tnsnames.ora*
# tnsnames.ora Network Configuration File: c:\app\Administrator\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
GIIS64 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-M1R2SQYZTHI)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = giis64)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER_GIIS64 =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-M1R2SQYZTHI)(PORT = 1521))*4.listener.ora*
# listener.ora Network Configuration File: c:\app\Administrator\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = c:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:c:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER_GIIS64=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-M1R2SQYZTHI)(PORT = 1521))
ADR_BASE_LISTENER = c:\app\Administrator*5.lsnrctl status*
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 09-NOV-2012 10:00
:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 09-NOV-2012 09:30:01
Uptime 0 days 0 hr. 31 min. 8 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File c:\app\Administrator\product\11.2.0\dbhome_1\network\a
dmin\listener.ora
Listener Log File c:\app\administrator\diag\tnslsnr\WIN-M1R2SQYZTHI\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-M1R2SQYZTHI)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>Kindly help me to get out from this issue.
Thanks in advance
Arun M M945512 wrote:
Hi experts,
Am new to the oracle database, I cannot able to connect my database while i try to connect database the error was flashed
*1. Error while connect the database*
SQL*Plus: Release 11.2.0.1.0 Production on Fri Nov 9 09:33:39 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: sys@giis64 as sysdba
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
http://edstevensdba.wordpress.com/2011/03/19/ora-12514/
http://edstevensdba.wordpress.com/2011/02/27/tnsping-101/
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
<snip> -
Problem: ORA-12514, TNS:listener does not currently know of service request
When I enter a command for an Oracle 10g Express installation I am getting the following error:
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
Running IRCA for all product(s):
connection="localhost 1521 orcl", -overwrite, orabpelUser=ORABPEL, esbUser=ORAESB, orawsmUser=ORAWSM
ERROR: Failed to establish database connection due to the following error:
Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Please check your connection parameters and try again.
Hmm, whats wrong?
Listener status yields:
D:\db\install\soa_schemas\irca>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 10-FEB-2008 13:04:22
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Startdate 10-FEB-2008 12:48:44
Uptime 0 days 0 hours. 15 min. 38 sec.
Trace-Level off
Security ON: Local OS Authentication
SNMP OFF
Standard-Service XE
Parameter file of listener D:\Oracle\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log file of listener D:\Oracle\app\oracle\product\10.2.0\server\network\log\listener.log
Summary listener endpoints...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services overview...
Service "CLRExtProc" hat 1 Instance(s).
Instance "CLRExtProc", Status UNKNOWN, has 1 Handler for this service...
Service "PLSExtProc" hat 1 Instance(s).
Instance "PLSExtProc", Status UNKNOWN, has 1 Handler for this service...
Service "XEXDB" hat 1 Instance(s).
Instance "xe", Status READY, has 1 Handler for this service...
Service "XE_XPT" hat 1 Instance(s).
Instance "xe", Status READY, has 1 Handler for this service...
Service "xe" hat 1 Instance(s).
Instance "xe", Status READY, has 1 Handler for this service...
The command was successfully executed.
D:\db\install\soa_schemas\irca>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 10-FEB-2008 13:18:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services _bersicht...
Service "CLRExtProc" has 1 Instance(s).
Instance "CLRExtProc", Status UNKNOWN, has 1 Handler for this service...
Handler:
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 Instance(s).
Instance "PLSExtProc", Status UNKNOWN, has 1 Handler for this service...
Handler:
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 Instance(s).
Instance "xe", Status READY, has 1 Handler for this service...
Handler:
"D000" established:0 refused:0 current:0 max:1002 Status:ready
DISPATCHER <machine: LOCALHOST, pid: 3584>
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1049))
Service "XE_XPT" has 1 Instance(s).
Instance "xe", Status READY, has 1 Handler for this service...
Handler:
"DEDICATED" established:1 refused:0 Status:ready
LOCAL SERVER
Service "xe" has 1 Instance(s).
Instance "xe", Status READY, has 1 Handler for this service...
Handler:
"DEDICATED" established:1 refused:0 Status:ready
LOCAL SERVER
The command was successfully executed.Hi,
no, you got it wrong:
Oracle uses network services which are a logical representation of the database to resolve network requests.
in your ntsnames.ora file you have the following:
network_alias = my_alias -- here you can write anything you just need to resolve it correctly
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(host=hostname or IP)
(port=listener adapter port)
) -- this a complete socket information of the listener adapter!!
(CONNECT_DATA=
(SERVICE=your_service) -- this is what you tell the listener about the service you want to connect to. It is defined in the instance with the paramter service_names
In general it is network aliasses which are resolved with connect descriptor in the tnsnames.ora.
A connect decriptor consists of the address part + the connect_data part.
The address part is used to reach the listener.
The connect_data part is the information you hand over to the listener.
So the listener must know the service name.
The listener can either know this from the instance itself. When an Oracle instance is started it tries to registrer itself with a listener which listens on port 1521 for the protocol TCP.
The instance tell this listener two paramater values: INSTANCE_NAME and SERVICE_NAMES. Then the listener knows the instance and which services are defined. It is just a reprentation of the database to the listener.
If the listerner knows the service requested with a connect, it can establish a connection to a service handler. This could be a dedicated server process or a dispatcher.
Another mehtod to let the listener know the service requested is so called static regustration of the instance. This is made with an SID LIST in the listener.ora file.
Then the listener knows SID for the instance plus ORACLE_HOME and can find the executable to start a server process for a connect request.
Hope it helps a little-.
=;-)
If you have further questions pls do not hesitate to ask. O.K.? -
JDBC - ORA-12514 TNS:listener does not currently know of service requested
Hi, I am using JDBC driver in Java for connecting to my Oracle XE 11g database on Windows 2008 Server R2 Standard, but I am receiving the following error
+java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor+
I am using this connection string:
jdbc:oracle:thin:@WIN-H0E7IBS7HLQ:1521:XE;
The configuration files:
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-H0E7IBS7HLQ)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-H0E7IBS7HLQ)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
I have already run some diagnostic tools:
tnsping XE
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 18
013 17:38:48
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = WI
IBS7HLQ)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME
OK (30 msec)
lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-MAR-2013
:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 -
ction
Start Date 18-MAR-2013 17:25:02
Uptime 0 days 0 hr. 16 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\net
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\WIN-H0E7IBS7
stener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-H0E7IBS7HLQ)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-H0E7IBS7HLQ)(PORT=8080))(P
ation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl services
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-MAR-2013
:06
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: WIN-H0E7IBS7HLQ, pid: 5248>
(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-H0E7IBS7HLQ)(PORT=57253))
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I have searched a lot about what is possible is going on, but I have'nt found nothing yet. Can somebody please help me
Edited by: 994624 on 18-mar-2013 15:54Both client and server are in localhost. I had a DNS to change the hostname to 127.0.0.1. I have remove it. Same thing happens. This is the listener.log
Mon Mar 18 18:15:18 2013
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63780)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63781)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63782)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63783)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63785)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63786)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63787)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63788)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63789)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63790)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63791)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63792)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63793)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63794)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63795)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63796)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63797)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63798)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63799)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63800)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63802)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63803)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63804)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:18 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63805)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:24 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.84)(PORT=63885)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:24 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::b8b1:84a9:681b:ab5a%11)(PORT=63886)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:24 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::18ef:3bdd:3f57:feab%15)(PORT=63887)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
18-MAR-2013 18:15:24 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))(SERVICE_NAME=xe;)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=2001:0:9d38:953c:18ef:3bdd:3f57:feab)(PORT=63888)) * establish * xe; * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor -
Good Day,
I'm encountering this problem
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
here's the java code
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String url = "jdbc:oracle:thin:@//10.143.85.21/UCSL";
String userName = "mssoriano";
String passWord = "mssoriano_4319";
conn = DriverManager.getConnection(url, userName, passWord);
and here's my tnsnames.ora
UCSL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.143.85.21)(PORT = 1521))
(CONNECT_DATA =
(SID = psusldb11)
Please do let me know if what may the cause of the problem and how to solve this. Thank you and God bless.Hi,
see this example
Connect to Oracle DB via JDBC driver
Frank -
TNS:listener does not currently know of SID given in connect descriptor
Hi
I have installed 11g on Windows 7, the startup & shutdown of DB is normal.
But connecting to a particular DB is giving a problem:
ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
in the listener.ora following entry is made:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = sid_test)
(ORACLE_HOME =$ORACLE_HOME)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = sid_test)
(ORACLE_HOME = $ORACLE_HOME)
(SID_NAME = orcl_test)
LIST1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
Also tried using ALTER SYSTEM REGISTER;
still there is no connection being established.
following outputs i am getting while connecting:
SQL> connect test_db@tns_test
Enter password:
ERROR:
ORA-12505: TNS:listener does not currently know of SID given in connect
descriptor
Warning: You are no longer connected to ORACLE.
While running lsnrctl status command, following error is appearing:
C:\Windows\system32> lsnrctl status list1
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 28-SEP-2012 10:35
:38
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias list1
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 28-SEP-2012 10:29:40
Uptime 0 days 0 hr. 5 min. 58 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File XXXXXXXXXXXXXXXXXXXXXXXXXXXX\listener.ora
Listener Log File XXXXXXXXXXXXXXXXXXXXX\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
The listener supports no services
The command completed successfully
Please help...!!!Hi Niket,
Thanks for the reply, i tried following as well in the listener file (still the error persistes):
list1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = sid_test)
(ORACLE_HOME =$ORACLE_HOME)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = sid_test)
(ORACLE_HOME = $Oracle_home)
(SID_NAME = sid_test)
The tnsnames.ora entry:
tns_test =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SID = sid_test)
) -
ORA-12505, TNS:listener does not currently know of SID given in connect des
Hello,
After installation of Oracle Database Express Edition 11g and Oracle SQL Developer 3.0, I tryed connect a database.
Informations entered :
Nom de connexion : xe_sys
Nom utilisateur : sys
Mdp : *********
Type de connexion : de base, role sysdba
Nom d'hote : POST1.compteUs.local
Port : 1521
SID : XE
when I tested the connection I have this famous message that appears:
Statut : échec -Echec du test : Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
this is listener.ora :
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = POST1.compteUs.local)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
this is sqlnet.ora :
SQLNET.AUTHENTICATION_SERVICES = (NTS)
this is tnsname.ora :
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = POST1.compteUs.local)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Can you help me please ?
ThanksThanks of help.
here, commande 'lsnrctl stat' executed :
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 10-OCT. -2012 08:
40:29
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 10-OCT. -2012 03:30:05
Uptime 0 days 5 hr. 10 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\POST1\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=POST1.compteUs.local)(PORT=1521)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
So, I tryed :
Informations entered :
Nom de connexion : test
Authentification OS
Type connection : de base, role sysdba
host name : POST1.compteUs.local
Port : 1521
Service name : XE
And this is message erreur :
Statut : échec -Echec du test : Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor -
Thread: ORA-12514: TNS:listener does not currently know of service request
HI guys,
I had installed oracle 10g on an AIX platform
now when I try to connect to the database using the normal way sqlplus dma/***@DMAN
it gives me the error:
$ ./sqlplus dma/dma@DMAN
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 29 09:27:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I can connect to the database specifying before the oracle SID on unix
ORACLE_SID=DMAN
export ORACLE_SID
$ ./sqlplus dma/dma
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 29 09:41:02 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
SQL>
I cant understand the problem
my listener.ora is:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dmora1)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /orasoft/app/oracle/DMAN)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = DMAN)
(ORACLE_HOME = /orasoft/app/oracle/DMAN)
(SID_NAME = DMAN)
and my listener status:
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 29-SEP-2008 09:43:19
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status LISTENER
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dmora1)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production
Start Date 29-SEP-2008 08:29:32
Uptime 0 days 1 hr. 13 min. 53 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /orasoft/app/oracle/DMAN/network/admin/listener.ora
Listener Log File /orasoft/app/oracle/DMAN/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "DMAN" has 2 instance(s).
Instance "DMAN", status UNKNOWN, has 1 handler(s) for this service...
Instance "DMAN", status READY, has 1 handler(s) for this service...
Service "DMANXDB" has 1 instance(s).
Instance "DMAN", status READY, has 1 handler(s) for this service...
Service "DMAN_XPT" has 1 instance(s).
Instance "DMAN", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
has any one any idea about my problem, because I have the same listener.ora in the backup machine and it works fine
Thank YOU in advancePlease don't duplicate threads :
ORA-12514: TNS:listener does not currently know of service requested in con -
Target does not currently support account discovery
What does the message "Target does not currently support account discovery" means?
I am getting it while using OPAM REST API to get the accounts from a given resource.
How can I make it support it?
TIA
LeoI would suggest waiting a day or two. YouTube has their standard flash format that will play on a web browser, but they also have an h.264 format that will play on the iPhone. It may take some time before they create the iPhone version. Similarly, it may take some time for YouTube to post a high def version.
-
Urgent:ORA-12514: TNS:listener does not currently know of service requested
Database server LinuxAS4 10g
oracle client in windows XP
getting error
lister.ora
# listener.ora Network Configuration File: /home/oracle/product/network/ad
stener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.9.19)(PORT = 1521))
tnsnames.ora
ORCL=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.9.19)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
sqlnet.ora
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES= (none)
tnsping orcl is working fine
C:\Documents and Settings\Administrator>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 21-JUN-2
006 11:17:31
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
E:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.
9.19)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
OK (0 msec)
from the client
c:> set oracle_sid=orcl
C:>sqlplus scott/tiger@orcl
C:\Documents and Settings\Administrator>cd c:\
C:\>sqlplus scott/tiger@orcl
SQL*Plus: Release 10.1.0.2.0 - Production on Wed Jun 21 11:21:30 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor[oracle@localhost admin]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 21-JUN-2006 11:52:20
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting /home/oracle/product/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.1.0.2.0 - Production
System parameter file is /home/oracle/product/network/admin/listener.ora
Log messages written to /home/oracle/product/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.9.19)(PORT=1521
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.2.0 - Production
Start Date 21-JUN-2006 11:52:20
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/product/network/admin/listener.ora
Listener Log File /home/oracle/product/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.9.19)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
still getting eror -
ORA-12505: TNS:listener does not currently know of SID given in connect
hi Dears,
i had insatlled new 11g on my Linux centios 5 system for testing purpose. when i started oem i can see agent is down but when i checked the agent status its saying below messages. i'm new to oracle . please guide me.
oracle11@test bin]$ ./emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.2
OMS Version : 10.2.0.4.2
Protocol Version : 10.2.0.4.2
Agent Home : /sd01/oracle11/app/product/11.2.0/dbhome_1/test_training11
Agent binaries : /sd01/oracle11/app/product/11.2.0/dbhome_1
Agent Process ID : 4206
Parent Process ID : 4181
Agent URL : https://test:1830/emd/main
Repository URL : https://test:5500/em/upload/
Started at : 2011-11-21 14:30:21
Started by user : oracle11
Last Reload : 2011-11-21 14:36:23
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 762
Size of XML files pending upload(MB) : 16.39
Available disk space on upload filesystem : 77.21%
Data channel upload directory : /sd01/oracle11/app/product/11.2.0/dbhome_1/test_training11/sysman/recv
Last attempted heartbeat to OMS : 2011-11-21 15:11:09
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
from OEM
* Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
i had restarted the listener
oracle11@test admin]$ lsnrctl start LISTENER_1
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-NOV-2011 15:05:16
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /sd01/oracle11/app/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /sd01/oracle11/app/product/11.2.0/dbhome_1/network/log/listener_1.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1523)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.1.25.151)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
STATUS of the LISTENER
Alias LISTENER_1
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-NOV-2011 15:05:16
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /sd01/oracle11/app/product/11.2.0/dbhome_1/network/log/listener_1.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1523)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.1.25.151)(PORT=1523)))
The listener supports no services
The command completed successfully
in this server i have 10g home but in the different filesystem : /home/oracle/oracle/product/10.2.0/db_2
11g home : /sd01/oracle11/app/product/11.2.0/dbhome_1
as per the agent messages i thought to add SID LIST in listner but got error message when i start the listener.ora below listener.ora details
# listener.ora Network Configuration File: /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER_1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1523))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.25.151)(PORT = 1523))
SID_LIST_LISTENER_1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = training11)
(ORACLE_HOME = /sd01/oracle11/app/product/11.2.0/dbhome_1)
(SID_NAME = training11)
(SID_DESC =
(GLOBAL_DBNAME = orcl11)
(ORACLE_HOME = /sd01/oracle11/app/product/11.2.0/dbhome_1)
(SID_NAME = orcl11)
ADR_BASE_LISTENER_1 = /sd01/oracle11/app
when i ran lsnrctl start LISTENER_1 i got below messages could any one please help me to solve this problem. my aim is when i start oem everything should work rightnow agent is down
[oracle11@test bin]$ lsnrctl start LISTENER_1
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-NOV-2011 15:27:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /sd01/oracle11/app/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /sd01/oracle11/app/product/11.2.0/dbhome_1/network/log/listener_1.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1523)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.1.25.151)(PORT=1523)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER_1 parameter in LISTENER.ORA
NL-00303: syntax error in NV string
NL-08014: Failed to initialize Diagnosability framework, falling back to old network tracing/logging
NL-08002: Diagnosability context creation failed
thanks ,
johnJohnvd wrote:
hi Dears,
i had insatlled new 11g on my Linux centios 5 system for testing purpose. when i started oem i can see agent is down but when i checked the agent status its saying below messages. i'm new to oracle . please guide me.
oracle11@test bin]$ ./emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.2
OMS Version : 10.2.0.4.2
Protocol Version : 10.2.0.4.2
Agent Home : /sd01/oracle11/app/product/11.2.0/dbhome_1/test_training11
Agent binaries : /sd01/oracle11/app/product/11.2.0/dbhome_1
Agent Process ID : 4206
Parent Process ID : 4181
Agent URL : https://test:1830/emd/main
Repository URL : https://test:5500/em/upload/
Started at : 2011-11-21 14:30:21
Started by user : oracle11
Last Reload : 2011-11-21 14:36:23
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 762
Size of XML files pending upload(MB) : 16.39
Available disk space on upload filesystem : 77.21%
Data channel upload directory : /sd01/oracle11/app/product/11.2.0/dbhome_1/test_training11/sysman/recv
Last attempted heartbeat to OMS : 2011-11-21 15:11:09
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
from OEM
* Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
i had restarted the listener
oracle11@test admin]$ lsnrctl start LISTENER_1
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-NOV-2011 15:05:16
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /sd01/oracle11/app/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /sd01/oracle11/app/product/11.2.0/dbhome_1/network/log/listener_1.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1523)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.1.25.151)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
STATUS of the LISTENER
Alias LISTENER_1
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-NOV-2011 15:05:16
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /sd01/oracle11/app/product/11.2.0/dbhome_1/network/log/listener_1.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1523)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.1.25.151)(PORT=1523)))
The listener supports no services
The command completed successfully
in this server i have 10g home but in the different filesystem : /home/oracle/oracle/product/10.2.0/db_2
11g home : /sd01/oracle11/app/product/11.2.0/dbhome_1
as per the agent messages i thought to add SID LIST in listner but got error message when i start the listener.ora below listener.ora details
# listener.ora Network Configuration File: /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER_1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1523))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.25.151)(PORT = 1523))
SID_LIST_LISTENER_1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = training11)
(ORACLE_HOME = /sd01/oracle11/app/product/11.2.0/dbhome_1)
(SID_NAME = training11)
(SID_DESC =
(GLOBAL_DBNAME = orcl11)
(ORACLE_HOME = /sd01/oracle11/app/product/11.2.0/dbhome_1)
(SID_NAME = orcl11)
ADR_BASE_LISTENER_1 = /sd01/oracle11/app
when i ran lsnrctl start LISTENER_1 i got below messages could any one please help me to solve this problem. my aim is when i start oem everything should work rightnow agent is down
[oracle11@test bin]$ lsnrctl start LISTENER_1
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-NOV-2011 15:27:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /sd01/oracle11/app/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /sd01/oracle11/app/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /sd01/oracle11/app/product/11.2.0/dbhome_1/network/log/listener_1.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1523)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.1.25.151)(PORT=1523)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER_1 parameter in LISTENER.ORA
NL-00303: syntax error in NV string
NL-08014: Failed to initialize Diagnosability framework, falling back to old network tracing/logging
NL-08002: Diagnosability context creation failed
thanks ,
johnhttp://edstevensdba.wordpress.com/2011/03/19/ora-12514/ -
Listener does not currently know of SID given in connection descriptor
Oracle 11g R2 64bit on Windows 7 professional giving following Error
Listener refused the connection with following error: ORA-12505, TNS: listener does not currently know of SID given in connect descriptor.
Oracle 11g R1 64bit on windows 7 professional works perfectly fine
Test through Net Manager. no use
check files ../Network/Admin/listerner.ora and tnsnames.ora which is perfectly fine. Still getting same error when trying to connect using sql developer.C:\Windows\system32>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 15-DEC-2011 00:14:40
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
The command completed successfully
C:\Windows\system32>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 15-DEC-2011 00:15:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\mycomputer\diag\tnslsnr\MW76O5RUIGAO3F\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MW76O5RUIGAO3F.dir.svc.accenture.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 15-DEC-2011 00:16:06
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\app\mycomputer\diag\tnslsnr\MW76O5RUIGAO3F\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MW76O5RUIGAO3F.dir.svc.accenture.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Windows\system32>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 15-DEC-2011 00:17:38
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "comcast" has 1 instance(s).
Instance "comcast", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "comcastXDB" has 1 instance(s).
Instance "comcast", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: MW76O5RUIGAO3F, pid: 5800>
(ADDRESS=(PROTOCOL=tcp)(HOST=MW76O5RUIGAO3F.dir.svc.accenture.com)(PORT=52996))
The command completed successfully
C:\Windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 15-DEC-2011 00:18:51
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 15-DEC-2011 00:16:06
Uptime 0 days 0 hr. 2 min. 49 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\app\mycomputer\diag\tnslsnr\MW76O5RUIGAO3F\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MW76O5RUIGAO3F.dir.svc.accenture.com)(PORT=1521)))
Services Summary...
Service "comcast" has 1 instance(s).
Instance "comcast", status READY, has 1 handler(s) for this service...
Service "comcastXDB" has 1 instance(s).
Instance "comcast", status READY, has 1 handler(s) for this service...
The command completed successfully
Maybe you are looking for
-
Two queries on same table in sender JDBC adapter
Hi all.. My requirement is as follows.... query a table and fetch rows where column Error="true" If there are no records in the table satisfying the above condition ,i want to send a mail stating that there are not records with error flag set to "tr
-
I imported over 4000 hi-res images into imovie. Preview screen is black.
I just imported 4774 images with dimensions of 3264 × 1832 (pretty huge, I know). After the 3.5 hours it took to import, the preview screen was dark, and only about 1/3 of the image thumbnails worked (the first third). I moved on anyway, and made all
-
Slide show headaches:(
Hi Folks, We are having trouble with the cronological order in slide shows. More specifically we wanted to make a ibook from the images in a slide show, in the same order that we arranged them for the slideshow. When pulled into the book folder, or e
-
IPhoto images reverting spontaneously (edits lost)
I'm not sure if I'm following protocol here. I started a discussion about "iPhoto Library Locked" and in attempting to solve the problem realized I have a different problem. I'm going to go ahead and post under the new heading in the hopes that it wi
-
I'm trying to recover my daughter's Pavilion dm4-3170se. My daughter had not made a recovery disk and has no recent back-up of her data file set. Problems (and what I have done so far) are quite parallel to what the user reported in this amazingly de