ST04 -table index info.
Hi,
In ST04 I check the table index information for one table there I noticed that Last statistics date is 02.01.2006 and CHAIN COUNT is 1850 also the table is having a large no of records so will it affect the performance of the table. if so then what is the necessary action we should take and what is the ideal conditions for this or is there any rule set by SAP .
Please help.
With Regards
Vinayak
Hi Vinayak,
what database version are you using and/or how are you updating your statistics (dbms_stats/ analyze)?
CHAIN COUNT 1850
first of all, CHAIN COUNT is only determined with analyze, not with dbms_stats.
This means your value of 1850 is as of the last statistics date done with analyze.
If you switched to dbms_stats (which was recommended) your chain count remains
on that value but your last statistics date is changed with each following dbms_stats run.
Your chain count value therefore might be much older than the last analyzed date if you
are using dbms_stats since then.
So if your are using dmbs_stats, get the current chain count with analyze.
If the number is still high check the row length if < 8kb and nr. of fields < 255 a reorganization
could eliminate your chained rows. (If you have records that are longer than 8kb and/or more
than 256 fields a reorganization could decrease the chained rows as well, for those records
that are <8kb and spanning over more than one block, but chained count will not be zero).
Generally speaking reducing chain count could reduce I/O (logical/physical).
Get in contact with your DBA in order to get the current chain count and dependent on
that reorganizing your table.
Kind regards,
Hermann
Similar Messages
-
I have a table with info and would like to select an item from that table
Hi
I have a table with info (course info that I searched for) and would like to select an item from that table to use for further use in my application.
It must work more or less like the tree structure where I can use an On Action select.
In other words; let say I am looking for all courses with "Advisor" it its descriptin / name, I want to click on one of the names and use it lets say to book people on.
Could some please assist me with this.
Regards
DebbieHi
The datasource for my table is the node searchcatalog. Under this node there is an attribute calles description where the items found are displayed.
I changed my code as follow:
data: ls_table type wd_This->Elements_searchcatalog,
lr_element type ref to if_wd_context_element.
DATA lo_nd_searchcatalog TYPE REF TO if_wd_context_node.
DATA lo_el_searchcatalog TYPE REF TO if_wd_context_element.
DATA ls_searchcatalog TYPE wd_this->element_searchcatalog.
navigate from <CONTEXT> to <SEARCHCATALOG> via lead selection
lo_nd_searchcatalog = wd_context->get_child_node( name = wd_this->wdctx_searchcatalog ).
@TODO handle not set lead selection
IF lo_nd_searchcatalog IS INITIAL.
ENDIF.
get element via lead selection
lo_el_searchcatalog = lo_nd_searchcatalog->get_element( ).
@TODO handle not set lead selection
IF lo_el_searchcatalog IS INITIAL.
ENDIF.
get all declared attributes
lo_el_searchcatalog->get_static_attributes(
IMPORTING
static_attributes = ls_searchcatalog ).
lo_nd_searchcatalog->get_lead_selection->( exporting index = wdevent->index importing
element = lr_element ).
lr_element->get_static_attributes->( importing static_attributes = ls_table ).
wd_context->set_attribute( exporting name = 'SELECTED' value = ls_table-description ).
When I try to activate it errors with: List elements that take up more than one line is not allowed. This error at the sentence: lo_el_searchcatalog->get_static_attributes(
If you cannot assist me further I will understand. Thank you. -
How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office
I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreetHi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi 23 KB -
To Use Cursor or TYPE table Index by PLS_integer
Hi All,
Let's see if I have table with no. of records 19,26,20,000.
If I want to loop through all the records which will be a optimized way To Use Cursor or TYPE table Index by PLS_integer.
Please guide.
Thanks.What is it you want to do to/with the rows you're looping through?
Ideally you want to avoid looping, as that's row by row (aka slow by slow) processing and it's expensive time-wise.
If you're doing DML (insert/update/delete) then you're best off doing it in one sql statement, rather than looping. -
BIA gurus..
Prior to our BIA implementation we had the drop and rebuild index process variants in our process chains.
Now after the BIA implementation we have the BIA index roll-up process variant included in the process chain.
Is it still required to have the drop and rebuilt index process variants during data load ?
Do the infocube fact table indexes ever get hit after the BIA implementation ?
Thanks,
Ajay Pathak.I think you still need the delete/create Index variants as it not only helps in query performance but also speeds up the load to your cubes.
Documentation in Perfomance tab:
"Indices can be deleted before the load process and after the loading is finished be recreated. This accelerates the data loading. However, simultaneous read processes to a cube are negatively influenced: they slow down dramatically. Therefore, this method should only be used if no read processes take place during the data loading."
More details at:
[http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a6473e07211d2acb80000e829fbfe/frameset.htm] -
Need to find total no fo tables/index/m.views in my database
Hello Everyone ;
How can i find total no fo tables/index/m.views in my database ?
when i google i have seen following command ;
SQL> Select count(1) from user_tables where table_name not like '%$%' /
COUNT(1)
but i dont understand what '%$%' indicates ?
Thanks all ;Hello Everyone ;
How can i find total no fo tables/index/m.views in my database ?
when i google i have seen following command ;
SQL> Select count(1) from user_tables where table_name not like '%$%' /
COUNT(1)
but i dont understand what '%$%' indicates ?
Thanks all ;
consider to simply Read The Fine Manual YOURSELF!
Oracle Database Search Results: like -
Invoice: How to use more than one Internal Table's info in one Table
Hi ,
I am doing an invoice, and have the info from internal table wa_itgen showing - Matnr, material description and quantity.
I want to also invlude the info Unit Price and Total price on the table line, but can't seem to do it.
I know that someone I must fill an internal table as I did on the Table itself : is_bil_invoice-it_gen INTO wa_ITGEN.
( TYPE IBBIL_INVOICE).
So now I need to insert:
IS_BIL_INVOICE-IT_PRICE INTO WA_ITPRICE.
Do I insert Program Lines, or do it via a LOOP. Obviously it needs to go under the same Table's cells to incluce it.
I tried a LOOP, Program lines under the CELL of the table where I want it displayed, and even a Second table.
If I have the first table's info, the page displays under VF03, but as soon as I try to insert the 2nd Table's info, under VF03 the screen just not show anymore.
Please help - I've started looking at local maps for bridges... yes, to jump from...Hi try this,
in the program lines fetch unit price and total price based on ur invoice number(as u are already in main loop which fetches invoice no material no etc).
now loop that internal table with condition inv no = current invoice no and item no = item number
and display those values on a new text field accordingly.
sample code...
select vbeln
posnr
j_3asize
FKIMG
KZWI1
from vbrp
into table itab
where vbeln = GS_IT_GEN-BIL_NUMBER.
loop at itab into wa where vbeln = GS_IT_GEN-BIL_NUMBER and
posnr = GS_IT_GEN-ITM_NUMBER .
move : wa-j_3asize to v_grid,
WA-FKIMG TO V_QTY,
wa-KZWI1 to v_val.
v_up = v_val / v_qty.
endloop.---->like this -
New tables & indexes created do not show up in dba_segments view
Dear all,
I have created 3 tables and some indexes, but these objects do not show up in dba_segments view. Is this a normal behaviour? Previously, with dictionary managed tablespace, I can specify the minimum extent to create, when the table/index is created. But I'm not sure how the locally managed tablespace work. Please do advice. Thank you very much in advance.
I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.
For the purpose of reproducing this issue, I have created the tablespaces as follow:
CREATE TABLESPACE CUST_DATA
DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_DATA01.DBF' SIZE 512K
AUTOEXTEND ON NEXT 256K MAXSIZE 2000K
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K
SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLESPACE CUST_INDX
DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_INDX.DBF' SIZE 256K
AUTOEXTEND ON NEXT 128K MAXSIZE 2000K
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K
SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10),
CUST_NAME VARCHAR2 (30),
EMAIL VARCHAR2 (30),
DOB DATE,
ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE IN ('B1','B2','H1','H2')),
CRE_USER VARCHAR2 (5) DEFAULT USER,
CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP,
MOD_USER VARCHAR2 (5),
MOD_TIME TIMESTAMP (3),
CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
TABLESPACE CUST_DATA;
SQL> SELECT TABLE_NAME, TABLESPACE_NAME
2 FROM USER_TABLES
3 WHERE TABLE_NAME LIKE 'CUST%';
TABLE_NAME TABLESPACE_NAME
CUSTOMER_MASTER CUST_DATA
SQL> SELECT INDEX_NAME, TABLESPACE_NAME
2 FROM USER_INDEXES
3 WHERE TABLE_NAME LIKE '%CUST%';
INDEX_NAME TABLESPACE_NAME
PK_CUSTOMER_MASTER CUST_INDX
SQL> SELECT SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME, BYTES
2 FROM USER_SEGMENTS;
no rows selectedPrior to 11g, when you created a table or whatever, you automatically allocated one extent.
This is now no longer true and depends on a parameter I don't remember.
dba_segments is a summary of dba_extents.
Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
Sybrand Bakker
Senior Oracle DBA -
Hi
Can anybody tell me how the BWA decides when a fact table index gets split into multiple parts? We have a number of very large cubes that are indexed and some have a fact table index that consists of one logical index which is made up of multiple physical indexes but other, similar sized cubes, just have one very large physical index for the fact table.
With the one very large physical index we seem to get an overload problem but when they are split into multiple parts we don't.
Thanks
MartinHi Martin,
this depends on the reorg config and the attribute of the index. You can manually trigger a splitting of an index via command 'ROUNDROBIN x', x stand for the number of parts which the index will be split to. Therefore you have to go into trexadmin standalone tool -> landscape right click on index -> split/merge index...
If you want an automatically split, you have to setup your reorg settings. Goto trexadmin standalone tool -> tab reorg -> options -> here you can choose the type of algorithm. Have a look into note 1313260 and 1163149.
Do you have a scheduled reorg job?
Regards,
Jens
PS: Every black box can be understood... -
Is it permissable to extend an SAP-provided table index?
(Please note I realize this might not be the best forum for this post; I did look at ABAP development, SAP on Oracle, and a few others, but given some other threads, it seemed like this might be the best place for it. Apologies if not).
We have a very large table (GMIA), and I noticed that two customer-created indexes can essentially be combined into one because the first index is RGRANT_NBR plus fields A and B, and the second index is RGRANT_NBR plus fields A, B, C, D, and E. So I might as well get rid of the first index and just keep the second one having RGRANT_NBR plus fields A through E.
However, I noticed that SAP-provided index 4 contains simply one field - RGRANT_NBR. So ideally, I could just add fields A, B, C, D, and E to index 4, then I could get rid of my second customer-created index.
Question: Is it permissable to extend an SAP-provided index like this? As a developer, I'm not in the modifying SAP objects business, but this is the first time I've been presented this situation with a table index. Given that our GMIA table has MILLIONS of records in it, getting rid of another customer-created index completely might be a great opportunity.
Thoughts?
DaveI really don't have a requirement for this. I'm a developer, and I've noticed some of our biggest timeout issues concern programs that hit table GMIA. So I thought I'd take a look at GMIA and our indexes to learn more about it via SE11 and DB02.
In our Production environment, we have over 88 million records in this table for a table size of 38.23 GB. Aside from the 6 SAP-provided indexes, 8 customer indexes have been created by others over time. It was in looking at these indexes that I noticed our 8th customer index, ZS8, is essentially the same 3 fields as ZS3, plus a few more fields. Ideally, ZS8 should NOT have been created, and ZS3 should have simply been extended with the additional fields.
It was suggested to me in another thread a long while back that I could potentially get rid of ZS3 as well and just make SAP index 4 look like ZS8 because SAP index 4 is just indexed by Grant Number (RGRANT_NBR). ZS8's first index field is Grant Number followed by 5 or 6 additional fields. That's why I was wondering if it was even a "thing" or a possibility to extend an SAP index, but customizing an SAP component makes Dave a very, VERY nervous boy.
Basically, I'm alarmed at the number of records in the table and the number of indexes we have. There's no archiving strategy here, so I probably can't do anything about the number of records in GMIA, which go back to 2006 when we first went live with SAP. But I can clearly get rid of one customer-created index (ZS3). And if I can deactivate SAP index 4, I would assume the system would then automatically use ZS8 since the first field is Grant Number for situations where it would have used SAP index 4.
So that's the background here. Honestly, I don't know how much improvement these things will make, but getting rid of ZS3 will save 5 GB of space, and presumably "deactivating" SAP index 4 would save almost 5 GB as well. I'm assuming we might see some negligible performance gains on our table operations involving GMIA, but it's still a beast with a large number of indexes, so I don't know.
I'm really, really interested in hearing from others' thoughts and recommendations -- your input is MOST welcome here!
Dave -
Problem with table-indexes when using select-options in select
Hello experts,
is it right that table-indexes will not be used if you take select-options to select data from the database?
in detail:
i have build up an table-index for one of our db-tables and test it via an test-programm. The first test with '=' comparisons worked fine. Every key of the index was used; checked via ST05!
e.g.: SELECT * FROM TABLEA INTO ITAB WHERE keya = '1' AND keyb = '2' AND keyc = '3'.
Now i startet the test with select-options
e.g.: SELECT * FROM TABLEA INTO ITAB WHERE keya IN seltabA AND keyb IN seltabB AND keyc IN seltabC.
First of all i just filled the seltabs with only 1 value: eg: seltabA= SIGN = 'I' OPTION = 'EQ' LOW = '1' etc.
Everything worked fine. Every key of the index was used.
But now, I putted more than one entries in the seltabs e.g.
seltabA: SIGN = 'I' OPTION = 'EQ' LOW = '1'
SIGN = 'I' OPTION = 'EQ' LOW = '2'
SIGN = 'I' OPTION = 'EQ' LOW = '3'
From now on, the indexed was not used completely (with all keys).
Isn't that strange? How can i use select-options or sel-ranges with using the complete table-indexes?
Thanks a lot,
MarcelHi Hermann,
i hope this helps:
this is the first one, which uses the complete index:
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" = ? AND "ORGID" = ? AND "KOART_BASIS" = ? AND
"STATUS" = ? AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR "STATUS" = ? OR
"STATUS" = ? ) WITH UR
RESULT: 5 IXSCAN /dbcon/01_con05 #key columns: 4
And the second one, which does not use the complete index! The 3 ranges are filled each with 2 values. Remember; when i fill them each with only one value, the result is the same as you can see above(/dbcon/01_con05 #key columns: 4):
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" IN ( ? , ? ) AND "ORGID" IN ( ? , ? ) AND
"KOART_BASIS" IN ( ? , ? ) AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR
"STATUS" = ? OR "STATUS" = ? ) WITH UR
and here the access-plan
0 SELECT STATEMENT ( Estimated Costs = 5,139E+01 [timerons] )
5 1 RETURN
5 2 NLJOIN
5 3 [O] TBSCAN
5 4 SORT
5 TBSCAN GENROW
5 6 <i> FETCH /dbcon/01_con
7 IXSCAN /dbcon/01_con05 #key columns: 2
As you can see, only 2 keys were taken for indexed selection!
Any idea?
Kind regards,
MArcel
Edited by: Marcel Ebert on Jul 28, 2009 5:25 PM -
TIPS(29) : TABLE에 걸려 있는 INDEX 찾아 보기
제품 : SQL*PLUS
작성날짜 : 1996-12-27
TIPS(29) : TABLE에 걸려 있는 INDEX 찾아 보기
===========================================
/* show_index.sql USAGE: Show the indexes on a table */
/* This script prompts the user for the table owner and name then gets */
/* the indexed columns for any indexes on the table */
column index_name format A20
column column_name format A25
column column_position format 999 heading 'Pos'
column uniq format a5
set verify off
break on index_name skip 1
select C.index_name,substr(I.uniqueness,1,1) uniq, C.column_name,
C.column_position
from all_ind_columns C
,all_indexes I
where C.table_owner = upper('&table_owner')
and C.table_name = upper('&table_name')
and C.index_owner = I.owner
and C.index_name = I.index_name
order by 2 desc,1,4
/ -
SQL Developer Behavior When Gathering Table/Index Statistics
Hey All,
Not sure if this has been posted yet. I did a search and did not find any threads on the topic though.
I noticed with SQL Developer 2.x, when you using the context menu to gather table/index statistics for a given table, you get no modal progress/waiting window like you did in 1.x. It just kind of "does nothing", even though it did actually execute the DBMS_STATS package. If you press cancel and try to navigate around, you get multiple "Connection is Busy" errors. Eventually it will come back and say "Statistics gathered for table <whatever>". In the old versions there was just a modal window with an animated progress bar while it ran the DBMS_STATS package. What happened to that? Or is this something unique to my install? Anyone else ran into this? Is there a fix or somewhere I can report this as an official bug? FWIW I'm running 2.1.1.64, and this did occur in the initial 2.0 release.
It is very confusing the first time you run into it... I pressed the "apply" button several times thinking it didn't take, but it ended up running the DBMS_STATS for every click I did.
Thanks!Same happens to all the other context menu opened dialogs. Indeed very confusing at first and disturbing.
The only official site to report bugs is Metalink/MOS, but you might be lucky if someone from the team picks it up here.
Regards,
K. -
Oracle Sys table index rebuild
hi, expert
I am new to this expert Forums
Blow Table Index are rebuild,This table are relation with sys user or not?
after rebuild index, getting error in alert log file
ORA-00600: internal error code, arguments: [psdnop-1], [1410], [], [], [], [], [], [], [], [], [], []
ORA-01410: invalid ROWID
when trying to select * from dba_network_acls getting error massage Rowid invalid
ALTER INDEX CTXSYS.SYS_C003684 REBUILD;
ALTER INDEX CTXSYS.SYS_C003683 REBUILD;
ALTER INDEX CTXSYS.SYS_C003682 REBUILD;
ALTER INDEX CTXSYS.SYS_C003681 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54056 REBUILD;
ALTER INDEX CTXSYS.SYS_C003677 REBUILD;
ALTER INDEX CTXSYS.SYS_IL0000054052C00002$$ REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54044 REBUILD;
ALTER INDEX CTXSYS.SYS_C003675 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54038 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54031 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54028 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54018 REBUILD;
ALTER INDEX CTXSYS.DR_STOPLIST_PK REBUILD;
ALTER INDEX CTXSYS.DR_STOPLIST_UNIQ REBUILD;
ALTER INDEX CTXSYS.DR_THS_BT REBUILD;
ALTER INDEX CTXSYS.DR_UNIQ_THS_BT REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_54003 REBUILD;
ALTER INDEX CTXSYS.DR_THS_RINGID REBUILD;
ALTER INDEX CTXSYS.DR_UNIQ_THS_PHRASE REBUILD;
ALTER INDEX CTXSYS.SYS_C003629 REBUILD;
ALTER INDEX CTXSYS.SYS_C003626 REBUILD;
ALTER INDEX CTXSYS.SYS_C003627 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_53991 REBUILD;
ALTER INDEX CTXSYS.SYS_IOT_TOP_53963 REBUILD;
ALTER INDEX OLAPSYS.SYS_C004604 REBUILD;
ALTER INDEX OLAPSYS.SYS_C004600 REBUILD;
ALTER INDEX XDB.SYS_C003740 REBUILD;
ALTER INDEX XDB.SYS_C003741 REBUILD;
ALTER INDEX XDB.SYS_C003742 REBUILD;
ALTER INDEX MDSYS.UNIQUE_CLASS_CONSTRAINT REBUILD;
ALTER INDEX MDSYS.UNIQUE_USER_CONSTRAINT REBUILD;
ALTER INDEX MDSYS.UNIQUE_LRS_GEOM_LAYER REBUILD;
ALTER INDEX MDSYS.UNIQUE_NETWORK_LAYER REBUILD;
ALTER INDEX MDSYS.UNIQUE_NETWORK_LINK_LAYER REBUILD;
ALTER INDEX MDSYS.UNIQUE_NETWORK_NODE_LAYER REBUILD;
ALTER INDEX MDSYS.UNIQUE_NETWORK_PATH_LAYER REBUILD;
ALTER INDEX MDSYS.UNIQUE_NETWORK_PATH_LINK_LAYER REBUILD;
It is possible to recreate this index again to solve this problem, or any other solution.
Thanks in Advance sir,Pl do not post duplicate threads - Oracle sys Index rebuild then Getting error Invalid Error Ora-01410
-
Processing SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
I tried to import my 20GB data into my database but it is pending/hanging almost 1 day at this line, which is
Processing SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX .
My db version is :Version 11.1.0.7.0
What could be the reason? Why it is waiting so long on this line? It is locking indexes?Windows Server 2008 R2 Enterprise
impdp user/pass@DB exclude=statistics schemas=user dumpfile=a.dmp log=a.log
Import: Release 11.1.0.7.0 - 64bit Production on Friday, 10 August, 2012 17:04:03
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "ODB"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "ODB"."SYS_IMPORT_FULL_01": odb/********@TEST parallel=4 dumpfile=UAT_08082012.DMP
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"ODB" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TYPE/TYPE_SPEC
Processing object type SCHEMA_EXPORT/DB_LINK
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. . imported "ODB"."PN_INVENTORY_HISTORY" 218.6 MB 1302517 rows
SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
and waiting here since 1 day..
alert log file has some warnings like:
<txt>Warning: drop_queue_table: No evaluation for the queue table: ODB.ROS_IN_QUEUE_TABLE
</txt>
</msg>
<msg time='2012-08-11T00:29:21.710+03:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
Thread 1 advanced to log sequence 91 (LGWR switch)
Current log# 1 seq# 91 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO01.LOG
Sat Aug 11 10:16:16 2012
Thread 1 advanced to log sequence 92 (LGWR switch)
Current log# 2 seq# 92 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO02.LOG
Sat Aug 11 10:16:40 2012
Thread 1 cannot allocate new log, sequence 93
Checkpoint not complete_
Current log# 2 seq# 92 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO02.LOG_
Thread 1 advanced to log sequence 93 (LGWR switch)_
Current log# 3 seq# 93 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO03.LOG_
Thread 1 cannot allocate new log, sequence 94_
Checkpoint not complete_
Current log# 3 seq# 93 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO03.LOG_
Thread 1 advanced to log sequence 94 (LGWR switch)_
Current log# 1 seq# 94 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO01.LOG_
Sat Aug 11 10:16:56 2012_
Thread 1 cannot allocate new log, sequence 95_
Checkpoint not complete_
Current log# 1 seq# 94 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO01.LOG
Thread 1 advanced to log sequence 95 (LGWR switch)
Current log# 2 seq# 95 mem# 0: D:\APP\TRAXADMIN\ORADATA\TEST\REDO02.LOG
<txt>Errors in file d:\app\traxadmin\diag\rdbms\test\test\trace\test_j003_6036.trc:
ORA-12012: error on auto execute of job 74639
ORA-20111: ORA-24010: QUEUE ODB.IFACE_AEX_IN_Q does not exist
ORA-06512: at "ODB.PKG_IFACE_QUEUE", line 80
ORA-24010: QUEUE ODB.IFACE_AEX_IN_Q does not exist
ORA-06512: at "ODB.PKG_IFACE_QUEUE", line 48
ORA-06512: at "ODB.PKG_AEX_INBOUND"
Edited by: user638937 on 11.Ağu.2012 00:27
Maybe you are looking for
-
Track "state" in Captivate 2.0
Hello Captivate Forum Members, First - thanks for the help and good information that this forum provides! My question of the day is: Can I track state in captivate? I am using Captivate 2.0. What I mean is: I have a slide setup with 5 buttons. Each b
-
Podcast stopped downloading - note popped up telling me to press the "get" button to continue download-WHERE is the "get" button?
-
Can I delete files in My Music
Apologies for the tone of this question: I've been trying to understand iTunes for the past 4 weeks, without much success. These days one expects software to be intuitively self-evident; that's why we don't have manuals anymore. In my case I have fo
-
Premiere Pro CS3.0.1 Update
Found this on another sire. Any ideas? Premiere Pro CS3.0.1 Update Just got notified that an update is available for Premiere Pro CS3. The update is 3.0.1. Went to Adobe's site to see what the update was, but couldn't find anything on it. Anyone know
-
I installed lm-sensors through pacman and ran the detection script. I've got 4 cores on my CPU but it seems only three are shown when I run sensors (and the word "coretemp" is nowhere to be found). # sensors radeon-pci-0100 Adapter: PCI adapter temp1