ST06 data not reflecting

Dear Experts,
WE are running on ECC 6.0 on Windows MSSQL 2005 platform kernel level 146.
Since yesterday we are not able to see any value in ST06 transaction code.( shwoing 0 value )
We have not done any changes in system and SAPOSCOL is running fine.
What could be the reason for the same. I have also rebooted system twice but didnt helped.
Best Regards,
AjitR

Hi,
Could you recommend any SAP note which talks about replacing SAP Unicode kernel for NON-Unicode system after Java-ADD IN installation
-> not possible to change kernel only, required Unicode conversion
check service.sap.com/unicode
Ideally for any Unicode ABAP+java installation it should be
K:\usr\sap\DEV\SCS01\exe
yes you are right for ABAP+JAVA system path should be \usr\sap\SID\SCS<Instance_nr>\exe\saposcol.exe
I tried to change the path in services through REGEDIT but still results are same as before
-> change through regedit not affected untill you reboot the server.
instead of that try to register saposcol service under windows service again.
do following steps.
first stop saposcol from windows services.
now open command prompt.
now change to your kernel directory.
execute following command.
ntscmgr remove SAPOsCol
now install service with following command
ntscmgr.exe install SAPOsCol -b <path_to_saposcol>\saposcol.exe -p service
where path_to_saposcol = <drive:\>\usr\sap\SID\SCS<inst_nr>\exe
regards,
kaushal

Similar Messages

File Upload data not reflected in the Layout

Hi,
Using the following how to document, I have written the file upload functionality.
The upload functionality works and the data is saved in the cube. We have a layout to display the uploaded data.
Issue:- The data is not reflected in the layout soon after fileupload, even after saving the data in the cube.
If i close existing webinterface and re-execute it. I see the uploaded data.
Once the data is saved in the cube, we would like to see this data in our layouts.
How do we achieve this ?
Appreciate your help.
Regards,
Vinay.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20load%20a%20flat%20file%20into%20bw-bps%20using%20a%20web%20browser.pdf

Hi,
When you click on Submit button the file data goes in the buffer and when you click on Save the data gets posted into cube and then the function module release the buffer.
Comment the FM call API_SEMBPS_REFRESH in Save button and refresh the layout, check if you can see the new data in the layout.
Please grant the points if this answer helps you.
Regards,
Deepti

Data not reflecting in ECC

We have cycle of material or vendor creation as given below.
New vendor/material creation on portal > Approve on portal > Check in MDM data manager > PI > Check ECC > Table Entry.
In many cases we have found Materials or vendors are reflecting in MDM after approval from portal but not going in ECC.
In some cases we have observed that PI_MDM sender adapter is picking up same file twice. The data contain payload are same in both messages.
While posting these messages in ECC 1st Idoc is successful in WE05 & 2nd is throwing error u201Cvendor is locked by user ABC (our own user ID)u201D
MDM adapter in PI server is occasionally picking same XML twice from MDM ready folder & tries to post both Idocs in ECC at same time, hence at ECC system gives an error.
Kindly suggest the solution.
Regards,
GAG

Please have a look at the Note 947081, Now on a broader level
this can be achieved by the Note mentioned above.
the hierarchy of what locale a component will be shown in the portal,
will be :
1)component- if he have a locale define
2) portal mandatory locale -
3)user locale
4)browser locale
5)Portal default locale
6) system locale
if you check on the prtDefault.properties file you will see
a line with : request.defaultcountry=us . on the hierarchy it is No 5.
on your Portal it determine to 'us', so you can make the change on this
level to uk , that way the default locale will take effect only if
the locale was not determine on a higher level.
and for your question : that way
afrench user will have a french locale. because the user locale locate
on a higher level on the hierarchy.
Hope the information will help you.

Forwarded successfully the workitem for BO-BUS2000220(complaint) in the worklist of other user: Problem in "Sent date" not reflecting correctly in SAP CRM 7.0 Web UI

I am working with SAP CRM 7.0. We have a workflow in the system which is triggered at the creation of complaint(BO:BUS2000220) and then assign the complaint workitem
in the woklist of specified agent. I have created a report and scheduled it daily to forward the complaint into the worklist of user B from worklist of user A after 7 days
from creation date of complaint. But the problem is that the forwarded complaint is showing in the worklist of user B with sent date(the creation date of complaint, not the
forwarded date).
Relevant code:
IF gw_complain-PROCESS_TYPE = 'ZCMS' AND age_complaint = 8.
          CALL FUNCTION 'SAP_WAPI_WORKITEMS_TO_OBJECT'
           EXPORTING
objtype         = 'BUS2000120'
objkey          = obj_guid_key
top_level_items = ' '
SELECTION_STATUS_VARIANT       = 0001
           IMPORTING
return_code     = return_code
           TABLES
worklist        = it_worklist[].
READ TABLE it_worklist INTO wa_worklist WITH KEY wi_type = 'W'.
CALL FUNCTION 'SAP_WAPI_FORWARD_WORKITEM'
            EXPORTING
workitem_id    = wa_worklist-wi_id
              USER_ID        = wa_worklist_esc-ESC_USER
LANGUAGE       = SY-LANGU
DO_COMMIT      = 'X'
CURRENT_USER   = wa_worklist_esc-CURRENT_USER
            IMPORTING
RETURN_CODE    = lv_return_code
            TABLES
MESSAGE_LINES = lv_mesg
* MESSAGE_STRUCT =
* USER_IDS       =
ENDIF.
Can someone help me how to change the sent date to actual forwarded date of complaint.

Hi Kavita,
There is a standard column in UWL with name 'Sent Date'. Other functionalities in UWL for example deadline monitoring (Due date column) are based on this sent date. This shows an employee what was the date workitem was created (sent date) and when it will get escalated (due date). Displaying forwarding date in Sent date will not give clear picture to employee as the deadline will be calculated based on sent date only not based on forwarding date. this was just an example.
even though if your client is insisting, i dont think it can be done without any enhancement in UWL web dynpro com sort of thing. you can check with your portal consultant too.
Regards,
Ibrahim

Data not reflecting in the front end after hiring from PA48

Hi,
I am doing the data transfer process from the webdynpro application. The candidate to be hired is getting reflected in PA48,and once the hiring is done and I run HRALXSYNC, the status is still red. Can anybody suggest what else needs to be done, so that the employee details are reflected in the front end.
Regards,
Afra

Hi,
Check this
Switch PBPHR: ON
Switch HRAC: X
in 77S0 table.
Regards,
Sai

Data not reflecting in Table

Hi,
I've simply added the Table Component from the Pallete to my web page and Connected with a Table named "Role_master".
while running the web application it shows me the following syntax on the Browser:
<table id="form1:table1:_table" class="Tbl_sun4" width="100%" border="0" cellpadding="0" cellspacing="0"
I have completely followed the steps as given in [Dru Devore's Blog |http://weblogs.java.net/blog/ddevore/archive/2008/02/jsf_tables_with_1.html]
Really, i'm not able to judge that why i'm getting this type of syntax instead of displaying Table with Data.
Please Help..
Thanks
Hitesh
Edited by: Hitesh_kumar on Jul 31, 2008 8:25 AM
Edited by: Hitesh_kumar on Jul 31, 2008 8:27 AM

Hi,
Thanks for the reply.
I'm Connecting my JSF Web application with the Sql server 2005 using NB 6.0 and i'm using the latest sqljdbc4.jar driver for sql server 2005.
while connecting the application with the sql server 2005 it is giving me following error :
java.lang.UnsupportedOperationException: Java Runtime Environemtn(JRE) version 1.6 is not supported bgy this driver. Please use the JDBC 4 Driver (sqljdbc4.jar)instead.Sourecode :
        Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
                java.sql.Connection con=DriverManager.getConnection("jdbc:sqlserver://localhost:1433;user=sa;password=test1;databaseName=sample");
                java.sql.Statement stmt=con.createStatement();
                java.sql.ResultSet rSet=stmt.executeQuery("select * from details where empcode='1001'");
                while(rSet.next())
                    lblName.setText(rSet.getString(1));
                rSet.close();
                con.close();
                stmt.close();               Since i'm using the latest driver, i don't know why such type of error is coming up...
If you any link, from i can download the NetBeans 6.0 Supported Sql Server 2005 Driver.. please suggest...
Thanks
- Hitesh

Credit memo related Data not reflected in BCT Query

Hi Experts ,
If anyone can help me .
Problem : I have loaded data in 0SD_C03 for sales analysis. Everything is alright and all data except Credit Memo related data are showing . During the selection in query the C/D posting + Doc Categ + Net Value forms the output value for Credit memo but it is not showing . The SD doc categ has credit memo records in VBFA table . Now i don't understand why data related to Credit memo is not retrieved in the query . I am using the standard queries and std BCT objects only .If anyone have come across please share your experience .
Theba

Check in your Cube fact table whether you have entries with document category O - for credit memo
If not, ensure cube has the data and your query do not have any exclusion filter dor document category O. Check in PSA also, if not there your extractor is excluding the credit memo records

BAPI_ACC_DOCUMENT_POST posted data not reflected in BKPF or BSEG

Friends,
I am using BAPI_ACC_DOCUMENT_POST, for posting the FI bad debts data through FB01. I am using BAPI_ACC_DOCUMENT_CHECK for checking the input data and subsequently BAPI_ACC_DOCUMENT_POST and BAPI_TRANSACTION_COMMIT for committing the data posted.
After using BAPI_ACC_DOCUMENT_POST, the commit bapi is also successful. The bapi return the document no. posted. But if you see the data in the tables BKPF and BSEG the data is not found.
It is really frustating, what could be the reason. Anyone of you faced such problem before. Any help on this issue.
regards
Bill Joseph

Hi,
              CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
                   EXPORTING
                        documentheader    = it_hdr
                   TABLES
                        accountgl         = it_gl
                        ACCOUNTRECEIVABLE = act_rec
                        currencyamount    = it_curr
                        return            = t_result.
              LOOP AT t_result WHERE ( type = 'E' OR
                                       type = 'A' ).
                EXIT.
              ENDLOOP.
              IF sy-subrc <> 0.
                REFRESH t_result.
                CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
                     EXPORTING
                          documentheader    = it_hdr
                     TABLES
                          accountgl         = it_gl
                          ACCOUNTRECEIVABLE = act_rec
                          currencyamount    = it_curr
                          return            = t_result.
                CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
              ENDIF.
See the above code.
And check wether you are checking for right company code and year that which you are checking in tables.
Thanks.

Master data modified at SQL end not reflecting in Info object master data

Hi All,
we have done some data modification at SQl end where the modified data not reflecting in infoobjects master data.
for example:
we have split/skills numbers like 1-1000 in the data base and now we did some modifications to that particular split/skills numbers and uploaded that data successfully in the SQL end.now the problem is that modified data is not reflecting in split/skill info-objects and showing the same old data but not the modified one.can you please explain me how to reflect that modified data in BI side.
regards
Vamshi D Krishna

Hi vamshi ,
what is type of data load to master data infoobject (Full / Delta), if you know the split/skills numbers, try to load with repair full till PSA and check the data. if data is correct you can load to infoobjects and data will be overwrite, after loading data into infoobject -> in RSA1 -> infoobjects-> right and select "Activate master Data" ( this is not a mandatory step, if there is any M and A version data is there that will be adjusted.) and updated data will be available infoobject master data.
Regards,
Daya Sagar

PO no not reflecting in GL/ Vendor line item display

Hi Guys,
Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

Hi Amit,
You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in Assignment field. What may be the reason and how I get the data (PO no.) in this field?

Tree table is not reflecting the updated model data changes at the front end

I have two tables ,
1) Provider table(tree table) 2)member table
I have implemented drag and drop functionality using jQuery UI on both tables.
In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
here is the code,
on drop:
$("#Provider tbody tr").droppable({
drop: function(event){
oController.AssignMember(oProviderId, oMemberId)
}).disableSelection();
Assign member function: here am updating the model.
AssignMember : function(oProviderId, oMemberId){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var oParameters = {};
oParameters.PROVIDER_ID = oProviderId;
oParameters.MEMBER_ID = oMemberId;
oParameters.CREATED_ON = new Date();
oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
var oController = sap.ui.controller("adsm.provider.member_assignment_view");
oController.GetProviderData();
},function(jqXHR) {
var errorMessage = jqXHR.response.body;
var jsondata = JSON.parse(errorMessage);
sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
GetProviderData function: here i bind the data to the table
GetProviderData: function(){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
var outputJson = {};
var p = 0;
var r = {};
if (oEventdata) {
r = oEventdata;
try {
if (oEventdata.d){
r = oEventdata.d;
} catch(e){
//alert('oEventdata.d failed');
try {
if (oEventdata.d.results){
r = oEventdata.d.results;
} catch(e){
//alert('oEventdata.d.results failed');
try {
if (oEventdata.results){
r = oEventdata.results;
} catch(e){
//alert('oEventdata.results failed');
$.each(r, function(i, j) {
outputJson[p] = {};
outputJson[p]["NAME"] = j.NAME;
outputJson[p]["ID"] = j.ID;
outputJson[p]["PROVIDER_ID"] = j.ID;
outputJson[p]["DELETE"] = 0;
var m = 0;
if (j.ASSIGNEDMEMBERS.results.length > 0) {
$.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
outputJson[p][m] = { NAME: b.NAME,
ID : b.ID,
PROVIDER_ID: b.PROVIDER_ID,
DELETE: 1};
m++;
p++;
var oModel = new sap.ui.model.json.JSONModel();
oModel.setData(outputJson);
oTable.setModel(oModel);
function onError(oEvent){
console.log("Error on Provider Members");
oTable.bindRows({
path:"/"
Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
Please have a look at the attached screen shots.
Best regards,
Amala Suganya.

Hi Amala,
I think this will help you:
Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
Kind regards,
RW

AR Down Payment Invoice Does Not Reflect in BP Master Data...

We have placed a sales order for a BP.
We select payment means and accept the payment
In the background a AP Down Payment Invoice is created
When we view the BP master data - the account ballance window does NOT reflect this "down payment"
If we select the golden arrow at account ballance, uncheck "reconciled transactions" you can see the payment and AP down payment and they clear each other out.
The problem is that when the final invoice is created it is not obvious that a down payment has been received. Even if you are simply working at the BP master data window, it is not obvious that a down payment has been received. I belive our process is correct because If you click the TDP box, the payment is listed and will be applied to the final invoice.
It simply does not alert the user that a payment had been received.
What are we doing wrong?????\
Thank you!
Edited by: Andrew Bleier on Feb 4, 2009 1:27 AM

Keith Taylor
You are right this feature is only available in Version 2007A. There account posting happen purely due to the pay SAP has been designed and the configuration of GL Accounts.
To make fundametal change to the core product is very difficult if you explain me your business process exactly as you do, I could think of alternatives.
Please let know.
Suda

Date Customer Exit in the query is not reflecting in the workbook

Hello.
We have a BI 7.0 Query where we have a restriction for req del date and billing date to show the month of current date - 2.
We have written 2 customer exit variables and we have restricted the same. The query is working well.
For Broadcasting, we have created a workbook for this query and saved it under a role.
The workbook is fine running for the current month., But if the month changes to the next, the workbook is not reflecting the same.
Still only Old dates are available in the workbook.
Please let me know if i am doing any mistake

Hi Karthik,
If the customer exit variable is of type i_step = 1, ie if it is a manual entry variable as well, then this will not get updated based on teh month of execution.
Kindly check the article below for info.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/enterprise-data-warehousing/how%20to%20update%20variable%20values%20in%20broadcast%20settings%20dynamically.pdf
Regards.
Shafi.

0material master data - attribute updated - not reflected in all providers

Hello,
An attribute of 0material was populated with data. Previously it was blank.
Since 0material is available in the dso's and cubes, the attributes come in as navigational.
I am a bit confused. The DSO which loads to the cube is not reflecting the 0material new attribute when displaying data. The cube which is loaded from the same DSO is reflecting the change to the 0material.
I did not think that data needed to be deleted and reloaded?
The attribute change run is part of the process chain and should update both dso and cube?
Example;
Cube
Cust 1
material abc
new attribute bingo
net value 100
DSO which feeds above cube
no data when selecting the same criteria above?
However, when extracting only material and new material attribute in the dso, the attribute comes up.
I am not sure if I am being clear. Thanks for any help you can provide.
Lynda

figured out the issue - I went back and saw the dso nav attributes were not selected. Should have noticed it sooner.

Changes made in RFC is not reflected in data services

Hi,
I am using a data service based on SAP R/3 RFC in my view
In my RFC i have some import parameters
and some export parameters
and when place a data service which is based on this RFC on the view for the first time , I am getting the import parameters and export parameters correctly
but the issue comes
when ever some one make changes in RFC and activating it again.
those changes are not reflected in data service (ex: a new import parameter is added or a parameter name is changed in the RFC, this is not reflected in data service)
i tried with deleting the existing data service and creating a new data service based on modified RFC
but even iam getting the data services details as pervious one ( as old data servie which i used at firt time)
why this is happening
how to solve this issue
regards
Srinivas

Hi,
Yes you need to restert the J2EE engine. Because when you imort it first time then it holdes it in cache memory. It will not be updated untill you restert the server. You restert the server then try it , you will get the right result for updated RFC.
Thanks
Chandan

ST06 data not reflecting

Similar Messages

Maybe you are looking for