ST06 - detailed Analisys - OS log not displaying anything

Hi Experts,
ST06 -> detailed Analisys -> OS log not displaying anything in my developement system. When I clickon the OSLog, it is giving the error message "<b>error message:Invalid Parameter
Please check your Saposcol and your CCMS Agents</b>"
I have already stopped and started the SAPOSCOL. even though it is not working still...
Please help to resolve this isssue.
Thanks,
Madhuri.

Hey Madhuri,
Did you get your issue resolved ? I 'm also facing the same problem.
If u hvae resolved the issue, do tell me how..
Regards
Rahat

Similar Messages

HT5429 maps on iphone 5 do not display anything

Hi everyone. I recently bought a new iPhone 5 and I have a serious problem with my maps app. It does not display anything I search except the grid lines and pins. please help how can I fix it. pls send the instructions at [email protected] Thank you in advance.

It is not a good idea to put any kind of personal contact information in such a public forum.
First, close the maps app. Double click the home button. At the bottom, press and hold any app until a red circle appears on the top of each. Tap the red circle on the Maps app. Next, reset the phone: press and hold the power and home buttons at the same time until the Apple logo appears. Ignore the red slider if it appears.

Some times the logs not display in process chains

Some times the logs not display in process chains then how could we find them??

If you are in Tcode RSPC and opened your process chain you are able to click on the Logs icon. It will prompt you for a date selection.
If this still doesn't work you might have forgotton to activate and schedule your process chain. Before you activate check that your start variant is set to Direct scheduling by double clicking on the start variant.
hope this helps.
Cheers,
Andrew van Schooneveld
(assign points if useful)

Compaq 615 not displaying anything

I was updating the Windows updates. then when It was displaying the message "do not turn off your computer. Windows is updating. " I mistakenly kicked the power pack cable and it removed it from the socket then the laptop turned off because I was using it with no bttry. When I switched it on its not displaying anything even the Windows f8 stage is not reached. how do I fix this problem. It's not getting in bios as well

bpali2001 wrote:
i have an adc 23 apple cinema hd display. that gets some power for the button backlights but no signal. i tried the dvi out with an other monitor. that gets no signal also. could resetting the PMU twice in a quick succession (accidentally) cause this problem?
Can you answer BDAqua's last question please…
BDAqua wrote:
I believe we have a PSU or Logic Board problem, using the DVI monitor does alt key on power up bring up anything on the display?
We need specific confirmation otherwise steps may be missed & nothing is resolved.
We also need to know about what tones you hear on startup - are you hearing the normal startup tone or something else?

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback

UIX Master-Detail - Find button does not display detail lines

Hello,
We have a master-detail UIX page. Master has one attribute only. When 'Next' or 'Previous' buttons are pressed, the next master-detail records are displayed.
However, when master attribute's value is changed by the user and the 'Find' button is pressed, the new detail lines are not displayed. Also we get following error:
JBO-26080: Error while selecting entity for <ViewObject>
Has anyone experienced this issue before?
Thanks, Ali.

Please dis-regard this post. The correct sequence is to click on Find button, enter new value then click on Execute button to query new values.
Thanks, Ali.

SNP to PPDS conversion log not displaying all errors

Hi Experts,
We use a batch job to convert SNP orders to PPDS order.
Post successful job completion, we checked in receipts view (/sapapo/rrp4) and found that there were some SNP orders still lying within PPDS horizon (these orders were not converted to PPDS orders)
But these erroneous orders were not displayed in logs (/sapapo/rrplog1).
Is there any configuration/setting that is restricting the display of these orders ?
Thanks
Shweta

Hi,
The issue is with regards to unconverted orders not being displayed in the logs.

Adf region is not displaying anything

Hi,
I am using adf region to display the data.For this I have created one bounded task flow with page fragments.
In the page fragment I created one output tag to display something.this page fragment is dropped in task flow.
Then I made one JSP page and drag the task flow and drop it as the region.The problem is it not displaying any data.
I am using jdev 12. Can you please tell me whether I am doing anything wrong.
Thanks,
Harsh

What do you mean by
Then I made one JSP page and drag the task flow and drop it as the region.
Did you create a jspx page or a jsf page. Depending on the fragment type it only works on a jsf page (jsf 2.0 page). 12c default is create fragments as 'Facelets' which only work in jsf Pages. If you want to use a jspy page you have to create the fragment as 'JSP xml'.
Timo

TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Onboard Graphics Card Not Displaying Anything

I got a free MS-7613 (Iona-GL8E) motherboard from my friend 's friend which was fully working, he upgraded his motherboard and no longer wanted/needed it. This is the first PC I have ever started to build, I've worked on the, before and know a reasonable amount about them, but the problem I have with this is, the onboard graphics card doesn't display anything. I tried via VGA and HDMI on a monitor and TV, both outputted nothing. The wire and monitor definitely work. The motherboards seems to work fine, it used to beep when it had no RAM, since then I bought RAM and it's been fine. I had a graphics card in but removed it as it also displayed nothing. All the USB drives work and it turns on fine, it just display nothing. Could it be because it had a graphics card in perviously and doesn't display anything because of that? Any help would be great!

Hi, "Beware of greeks bearing gifts." Obviously there are reasons why you have ended up with a hand-me-down. One might be a bad motherboard graphics processor. You need to provide more information about your hardware configuration. Additionally, contact your friend and find out what HP product was the motherboard installed in so we can look for specific information. Post back when you have more information.

Lumia 920 Not Displaying Anything

Hey everybody! I was trying to hard reset my phone when all of a sudden it got bricked. It got stuck on the spinning cog wheels for a good two hours, so I decided that I might as well try to unbrick it with this guide: Tip: How to fix a bricked Nokia Lumia 920 | Windows Phone Central Well, that didn't go all that great. It turns out now my phone won't even display anything. It's just a black screen, a plain black screen. When I plug into the computer it still makes the noise but other than that nothing will else will work. Is there anything I could try for now or is a complete goner? Someone else had the same issue and I'll quote him, as it's a bit more descriptive: "Hi guys,
I've a Nokia Lumia 820 who is bricked and have nothing displayed on screen, no spinning gears, no lighting... So I've tried the step here and the Nokia is detected by Windows (tried on 7 x64, 8 x64, and a XP VM), but strangely detected and no detected (like plug-in and plug-out) and then the Volume Down + Power don't do anything.
Some one have idea to make my Nokia working again... (i've an old iPhone for now... help me please ! )
Etienne"
That was a comment made at the very bottom of the guide. I'm having that same issue. Thanks for any help that I can get.

The only solution left seems to be a visit to Nokia Care. Be informed that you have already voided Warranty by following unauthorised process mentioned in the link pasted by you ..BTW, there are quite a few suggestions on THIS Forum (to resolve your original problem) that you would have tried without voiding the Warranty.

Account Details page transaction link do not display anything

Hi,
I extended the TransactionTableVO to include new columns. Initially, whenever I click on the transaction link, I get an exception error. But I fixed it by commenting out functions that seem to overrride the original one (like setIrSalesOrder, setAmountDueRemainingFormatted etc). It worked for Payment transaction type but not for the other types like Credit Memo, Chargeback, Invoice, Debit Memo, etc.
This Transaction link displays different pages according to the transaction type. I don't have any clue why it worked for Payment transaction type but did not work for the rest. There is no error just blank content.
I opened the original TransactionTableVORowImpl.class and found the following code possibly related to this issue:
public static String getStaticTransactionDetailsRegionCode(InvoiceTableVORowImpl invoicetablevorowimpl, String s)
String s1 = null;
if("INV".equals(s) || "GUAR".equals(s) || "CB".equals(s) || "DM".equals(s) || "DEP".equals(s))
s1 = "ARITRANSACTIONDETAILSPAGE";
} else
if("CM".equals(s))
s1 = "ARITEMPCMDETAILSPAGE";
} else
if("PMT".equals(s))
s1 = "ARI_PAYMENT_DETAILS_PAGE";
} else
if("REQ".equals(s))
s1 = "ARITEMPCMREQUESTDETAILSPAGE";
return s1;
public void setTransactionDetailsRegionCode(String s)
setAttributeInternal("TransactionDetailsRegionCode", s);
I checked the URL and it does contain the correct name of the page i.e. if it's an Invoice transaction type, it includes ARITRANSACTIONDETAILSPAGE in the URL. So it is getting the correct page to redirect to. The window title, however, contains the following:
Message not found. Application: AR, Message Name: nullTitle
Any assistance is greatly appreciated!
N
Edited by: pekochan on 25/11/2009 09:43

I think I'm not passing the correct paramaters. I checked the URL and it's not passing any &Irtransactiontype. How can I check where this parameter is coming from??

IPad does not display anything !! (white screen)

Hey,
I have a strange problem with my iPad(16GB WiFi). It turns on but the screen turns white (nothing display… Not even Apple logo)!!
It responds to my interaction … For instance, I can slide to unlock it (of course, I cannot see it but I know where it is located)
I try to restore it through iTunes, it did but it does not fix the problem !!
In other words, everything is working but you cannot see anything on the screen.
Please help !!??

Searching broadly through discussion areas, such as Safari, iPhone, Mac, etc. getting a white screen is common. Apparently this can happen while logged into sites such as Google. Apple seems not to know or care about this issue, since no one from Apple answers any of these messages.
I managed to bring back Safari from the dead by going to iPad Settings for Safari and cleaning out Cache, Cookies, History. Don't know why this helped.
Am wondering what would happen if I downloaded Firefox to my iPad and started using it instead. Firefox has worked wonderfully on my other machines - Mac Pro at work, Windows 7 at home.

Macbook pro does not display anything

Model is Macbook Pro 15" Mid 2009 Unibody
Mountain Lion
Modifications:
CD drive replaced with additional 500 GB Hard Drive
One of the 2 GB RAM chips replaced with a 4 GB chip
Earlier today I was browsing the internet on my MBP and suddenly the laptop froze, the screen froze, the mouse and keyboard were not responding at all, which eventually led me to have to force shut it down (by holding the power button). When I tried to turn the laptop back on it started up (as in I could hear the fan and the white light came on) but there was no display and then 4-5 seconds after it turned off and then started up again by itself and stayed on, still no display on the screen at all, its off and the keyboard doesn't seem to be responding either which I figured by trying to press the caps lock button to see if the green light comes on in which it didn't.
I have tried pressing the Ctrl+Shift+Alt+Power button and then turning the laptop on but the same problem still persists. The laptop starts up, turns off and then starts up again and then stays on with nothing displayed on the screen and no response from the keyboard. The start up chime also doesn't occur. I am unable to start the laptop in Safe mode or any other mode that requires me to hold a button when powering up as the laptop turns off after 4-5 seconds and then starts up again. I have looked online to find anyone with a similar problem but can't seem to find any posts regarding this.
The laptop has not been dropped or anything, neither had it experienced any liquid damage. It has been running smoothly before the problem that occured earlier. I am in desperate need of my Macbook Pro and there doesn't seem to be any Genius Bar appointments available in the next 7 days in any Apple store near to me (Central London).
Any help or advise will greatly appreciated.
Khal

Make that genius bar appointment and wait those seven days. That is your best option to get it diagnosed properly (for Free).
Ciao.

Dbms_output.put_line not displaying anything

I am running the below code (ssn_run.sql) using sqlplus 10.2.0.1.0 on my windows XP professional client PC.
The database is a Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit running on Solaris
I cracked my head for about one hour but couldn't figure out this :
accept input_ssn prompt 'Enter SSN :'
set feedback on
set serveroutput on
set echo on
set term on
set heading on
set pagesize 0
set linesize 10000
set verify on
undefne sdate input_ssn
col sdate new_value sdate
col input_ssn new_value input_ssn
select to_char(sysdate,'YYYYMMDD') sdate from dual;
spool C:\PERSON_DATA_&&sdate._&&input_ssn..TXT
select 'REPORT GENERATED ON : '||SYSDATE FROM DUAL;
begin
select personid into v_personid from person where SIN = '&&input_ssn';
INSERT INTO PERSON_OLD
(PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME, AKANAME, DCFM,
IROWID, SUFFIX, PTYPE, OLD_SSN)
SELECT PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME,
AKANAME, SIN FROM PERSON WHERE SIN = '&&input_ssn';
INSERT INTO MEMBER_OLD
(CLNT, MKEY, PERSONID, MEMNO, OLD_MEMNO)
SELECT CLNT, MKEY, PERSONID, MEMNO,MEMNO
FROM MEMBER WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
UPDATE PERSON SET FNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS'),
LNAME = TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
UNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS')||' '||TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
AKANAME=NULL WHERE SIN = '&&input_ssn';
UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
for i in(select personid person_other from person_relation where relpersonid in(select personid from
person where PERSONID = v_personid))
loop
dbms_output.put_line('i.person_other is : '||i.person_other);
UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID = i.person_other;
end loop;
EXCEPTION
WHEN OTHERS THEN
     ecode := SQLCODE;
     emesg := SQLERRM;
     dbms_output.put_line('Error while data scrubbing: Error code is : ' || ' - ' || ecode);
     dbms_output.put_line('Error message is :' || ' - ' || emesg);
end;
spool off;
set term on
set feedback on
set HEADING on
set verify on
--End of code
The SELECT statement that comes in the for loop should return data as v_personid has a value. (I tested this by a select statement)
However, I am just not able to display the line which comes in the inner loop :
dbms_output.put_line('i.person_other is : '||i.person_other);
The result of this dbms output put_line neither shows up on the screen, nor it gets written to the spool file...I am stumped with this...
The other dbms_output put_lines that display error displays okay, but not the one in the inner loop.... Can someone help me out if you see any obvious issues here........
Also my UPDATE MEMBER statement inside the for loop doesn't do anything whereas it was supposed to update a row !!
Thanks

You could display the number the query return by adding;
v_count number;After you assign v_personid;
dbms_output.put_line('v_personid is : '||v_personid );
(select count(*)
into v_count
from person_relation
where relpersonid in(
   select personid
   from person
   where PERSONID = v_personid)).
dbms_output.put_line('v_count is : '||v_count );

ST06 - detailed Analisys - OS log not displaying anything

Similar Messages

Maybe you are looking for