St22 Dump in Mail

Dear All,
I want to configure the St22 dump in mail , With criteria if Mail is more than 150 in a day it should send a mail.Please Let me know the steps need to be done.
RK

Hello Rableen,
in RZ20 there are several MTEs, where dumps are catched, for example, ABAP dumps are displayed under:
RZ20 --> SAP CCMS Monitor Templates
               --> Entire System
                    --> <SID> --> Application Server
                         --> <instance> --> R3Abap
and here you have these MTEs
You can configure threshold values in the properties of MTE "Shortdumps Frequency" and assign an autoreaction method.
But this MTE is only for ABAP dumps. Other type of dumps you can find as described in KBA:
1942651 - RZ20 does not display shortdumps
but there is no such monitor in RZ20, which cathes all dumps from ST22 in one MTE.
Regards,
Alwina

Similar Messages

Trigger ST22 Dumps as EMAIL

Hi Everyone,
I want all my ST22 Dumps to be automatically triggered to a particular User mail id (Busines Workplace). so that, if any new Dump comes in a Production system i will come to know that while checking mail and provide solution immediately.How this can be done from Basis side
Thanks& Regards,
Siva

Hai,
Check the below link.....
http://help.sap.com/saphelp_nw70/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
Regards,
Yoganand.V

COMPUTE_BCD_OVERFLOW ST22 dump

Dear All,
When I run the ECC_PRD_BITX_D_FDM_INVOICE, which is a standard SAP(program FDM_INVOICE_MEMORY).
I get COMPUTE_BCD_OVERFLOW ST22 dump.
This short dump occured due to CX_SY_ARITHMETIC_OVERFLOW i.e. Target field size was not able to store the value of source field at the folowing code location while assigning value to l_days_of_delay.
   90       ENDIF.
   91
   92 *     set actual discount and delay in payment
>>>>>       l_days_of_delay = sy-datlo
   94                       - <open_item>-zfbdt
   95                       - <open_item>-zbd1t.
Are there SAP Notes that can solve this problem?
My system details
S/w Component : SAP_APPL
Release : 604
Highest Support : SAPKH60405
sapnote_0000620532, sapnote_0001239612 , sapnote_0001323002 do not work in my system
Regards,
Jack Silverz

hi jack,
just check these avalilabe notes for your dump.
620532
1323002
1239612
hope this will help u.
thanks

ST22 Dumps in ECC pushed to Slution Manager

Hi,
We have a ECC6.0 and Solution Manager in our system.
I wanted to configure that if a ST22 Dump occurs in ECC 6.0, the ST22 dump should be pused to the Solution Manager and i should be able to view it through the Solution Manager.
Please let me know whether it is possible or anyone has done it

Dear andreas,
You will not be able to see ST22 dumps in solution Manager. You can see dumps in Solution Manager Diagonstics.. for that you need to configure SMD agents on satelite system and SMD on solution Manager...
also if you just want to get alerts .. you can configure.. CCMS RZ20 and use solution manager as central system..
search in help.sap.com for more info..
Let me know if you require any furher info..
Regards,
akhilesh

How can I read st22 dump in ABAP

hello,
i would like to know if st22 dump info could be read via FMs or Classes. I found a class CL_DUMP_INFO_MANAGER, btu well could not find documentation on it usage. Will be glad if someone can tell me how to retrieve St22 info.
- Harish

Hi,
Try the fun module
RS_ST22_GET_DUMPS
to get the dump results.
other related fun modules are:
RS_ST22_GET_DUMPS_CATEGORIES
RS_ST22_GET_DUMP_CATEGORY
RS_ST22_GET_DUMP_CATEGORY_TEXT
reward if useful
regards,
Anji

ST22 Dump - Need to find associated proxy XML

Hi,
I need to find the inbound proxy call (xml message), which has caused the ST22 dump. Can any of you tell me whether the transaction id or any other values from ST22 can be used to track the message unique?
Thanks,

HI Joe,
for any proxy call either inbound or outbound, you will find all the processed the messages in the SXMB_MONI transaction.
the messages which are processed successfully has the status and processed successfully but if there is any problem during the processing of message because of program dump then this message remains in the green flagged status. hence try to find out the green flagged status and check the error log for the same. you will find out the exact error message which is appearing in ST22.
you can also try to check the queue using smq2 transaction , if there is any dump while processing the message the followeing messages are got stuck as long as you are not deleting the first messages. from there also you can see the erroneous XML data.

SAP ST22 dump SAPSQL_ARRAY_INSERT_DUPREC

Hi All,
We are getting dump SAPSQL_ARRAY_INSERT_DUPREC in testing system. SAP basis: 701 and Oracle 10.2.0.2
We are getting this dump from yesterday only and the details of the dump are as mentioned below:
============================================================================================
Short text
    The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSBAL_DB_INTERNAL" had to be terminated because it
     has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "BAL_DB_INTERNAL_NO_UPDATE_TASK" "(FUNCTION)", nor was it propagated
     by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
Information on where terminated
    Termination occurred in the ABAP program "SAPLSBAL_DB_INTERNAL" - in
     "BAL_DB_INTERNAL_NO_UPDATE_TASK".
    The main program was "SWNCCOLL ".
    In the source code you have the termination point in line 64
    of the (Include) program "LSBAL_DB_INTERNALU02".
    The program "SAPLSBAL_DB_INTERNAL" was started as a background job.
    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"
    Job Initiator.. "BASIS"
    Job Number..... 08893100
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "BAL_DB_INTERNAL_NO_UPDATE_TASK" "(FUNCTION)", but it was neither
     handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLSBAL_DB_INTERNAL "; its source code begins
     line
    1 of the (Include program "LSBAL_DB_INTERNALU02 ".
System environment
    SAP-Release 701
    Application server... "appl543"
    Network address...... "122.99.01.88"
    Operating system..... "AIX"
    Release.............. "5.3"
    Hardware type........ "099DER88BN90000"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 27
    Shortdump setting.... "full"
    Database server... "appl543"
    Database type..... "ORACLE"
    Database name..... "Q22"
    Database user ID.. "SAPSR3"
=====================================================================================================
Also some jobs are cancelled and they are forming the above dump. the detials are:
SAP_COLLECTOR_FOR_NONE_R3_STAT                 BASIS        Canceled        17.12.2010 00:43:31
SAP_COLLECTOR_FOR_NONE_R3_STAT                 BASIS        Canceled        17.12.2010 02:43:31
SAP_COLLECTOR_FOR_NONE_R3_STAT                 BASIS        Canceled        17.12.2010 03:43:31
SAP_COLLECTOR_FOR_NONE_R3_STAT                 BASIS        Canceled        17.12.2010 04:43:31
SAP_COLLECTOR_FOR_NONE_R3_STAT                 BASIS        Canceled        17.12.2010 05:43:31
SAP_COLLECTOR_FOR_NONE_R3_STAT                 BASIS        Canceled        17.12.2010 06:43:31
**The cancelled job SAP_COLLECTOR_FOR_NONE_R3_STAT generating the above dump at ST22.**
Please suggest us a solution. Thanks in advance!!!
Regards
Veera
Edited by: Veerab on Dec 17, 2010 11:33 AM

>     1 of the (Include program "LSBAL_DB_INTERNALU02 ".
Try the following:
open http://service.sap.com/notes
Search for "LSBAL_DB_INTERNALU02"
Markus

ST22 Dumps: Shared Objects

Hi SDN,
in our SRM System, SRM Server 5.5, WAS700 ABAP, we get ST22 Short Dumps concerning "shared objects".
This is the Dump Short Analysis:
Runtime Errors         SYSTEM_NO_SHM_MEMORY
Date and Time          19.08.2008 12:20:50
Short text
     No more memory for 2516576 bytes in the shared objects memory.
What happened?
     The shared objects memory is full or an area management specified
     memory limit has be reached.
In heard, that "shared objects" is part of the new WAS 620, 640, 2004s, 700 ... releases
What are exactly these shared objects. And how can we avoid the dumps?
We have an instance profile parameter set:
abap/shared_objects_size_MB                 100
Apparently this is not enough... Are there any recommendations?
thanx, matthias

Take a look at [Note 972757 - Occurence of the SYSTEM_NO_SHM_MEMORY runtime error|https://service.sap.com/sap/support/notes/972757] for further information. You should investigate what is using the shared objects memory, it may be an error in a application. The note will help to determine this.
Regards,
Nelis

ST22 Dump Analysis

How to use ST22 to analyse dump analysis in a ABAP program ?

Hi
You can use the function module SUBST_LIST_ABAP_DUMP to get the complete text of the dump and you can use the function module TCC_SHORTDUMP_INFO to get all the short dumps within a date range.
SUBST_LIST_ABAP_DUMP - Get the complete text of the dump
TCC_SHORTDUMP_INFO - Get all the short dumps within a date range
RS_ST22_GET_DUMPS
RS_ST22_GET_DUMPS
to get the dump results.
other related fun modules are:
RS_ST22_GET_DUMPS_CATEGORIES
RS_ST22_GET_DUMP_CATEGORY
RS_ST22_GET_DUMP_CATEGORY_TEXT
Regards
Vasu

ST22 Dump Pointing to ab_inidt?

Anybody ever seen this in a dump?
The termination occurred in the function "ab_inidt" of the SAP
Basis System, specifically in line 336 of the module
"//bas/46D/src/krn/runt/abload4.c#3".
Thank-You.

ABAP runtime errors    LOAD_COMMON_PART
       Occurred on     09/10/2007 at 13:48:27
The length of COMMON PART "PRIPDATA" in program "SAPFV50P" is incorrect.
What happened?
The current ABAP/4 program "SAPMV50A " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
The structure of the COMMON PART "PRIPDATA" in program "SAPFV50P" is
different from the area in the calling program.

1000's of old emails keep dumping into mail

Help. My wife has an iBook with Mac OS X Tiger. Last November, I bought her an iPhone and set up her mail account on the iPhone. Since then, 1000's of old emails keep dumping into her laptop Mail inbox. She will take an hour to delete them, but then a week later suddenly they are all back. I deleted the email account on the iPhone in case that had anything to do with it. I don't know if this is a Apple Mail problem or a mail provider issue. I've checked the settings on her mail and can't see anything that affects it. I have the new Mac with Leopard and have never had any problems with mail with my previous iMAC or this one but here laptop is another matter.
Any suggestions?

Which protocol is your wife using with Mail - POP, or IMAP? If it's POP, once the emails appear again, right click on the mailbox in question and select 'Get Info'. Ensure "Show messages: All messages on POP server" is selected, and see if the emails in question are listed. If so, click the 'Remove From Server' button at the bottom on the right.
If not, it appears this is likely an issue with Mail not removing the messages completely when deleted.
..k

St22 dump : Syntax error in program "SAPLCRM_KNOWLEDGE ".

Hello experts,
When i click on Define Template for folder in SPRO ( spro -> customer relation relationship management>
basic function --> content management ---> define template for folder) it goes to dump.
Runtime Errors         SYNTAX_ERROR
Short text :Syntax error in program "SAPLCRM_KNOWLEDGE ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSVIM" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLCRM_KNOWLEDGE " in include
      "LCRM_KNOWLEDGEF03 " in
     line 71:
     ""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
     "trings, references, or structures as components. -"
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "SAPLSVIM" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPLCRM_KNOWLEDGE :
    ""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
    "trings, references, or structures as components. -"
The version of CRM is crm 2007 with support stack sp02
Regards
Ranadhir

Thanks Venkataramanan, after the implementing the note 1117598 and 1101434 the problem solved.
Regards
Ranadhir

RV60SBAT DBIF_RSQL_INVALID_RSQL - ST22 dump using VF06

Hello
We are trying in test system to run a test in VF06 selecting approx
13000 DMR. When we try to run the program, we recieve a dump . Is there a limitation for number of selected DMR, and if so what is the max amount?
Kind regards

Check these threads
[Error DBIF_RSQL_INVALID_RSQL in R/3|Error DBIF_RSQL_INVALID_RSQL in R/3]
[Reg Blocked Export Documents Runtime Error |Re: Reg Blocked Export Documents Runtime Error]
thanks
G. Lakshmipathi

ST22 DUMP When I tried to change settings in se03 transaction

Hello Gurus
We are facing some troubles after we done an upgrade ECC EP6, In the "old system" when we try to change settings to "no modificable" in transaction se03 appears the following dump (we have the same issue in both systems (new and old)), I show you in the next screens:
Please share your comments or advices to solves this issue.
Best Regards
Eduardo

Hi Pranay thanks for the comments
This is the Error analysis
And the "How to correct the error"
And here is the log mentioned
And the transaction you mentioned, I cheked before I post this issue and the results are: SM13 no error updates, SM12 no locks and the sm50 works fine.
Thanks for your help
Eduardo

Ready to dump my Mail program

I have a similar problem as previous post "Password not accepted". I've been happy with Mail for years (version 1.2.5), but when I recently changed my password, that was the end of smooth runnings.
No matter how many times I edit my password and double-check information in Mail settings, I get the following:
"UNABLE TO RECEIVE MAIL There may be a problem with the mail server or network. Check the settings for account “******” or try again.
The server error encountered was: The user name and password specified in Mail preferences were not accepted by the server. "
or sometimes, for variety, it gives me this:
"The server error encountered was: reading data from host mail bellsouth.net failed."
I can send e-mail no problem. And I can log in to webmail no problem.
I'm just tired of dealing with this. Assuming there is no easy fix, is there another stand-alone e-mail program available to OSX users?
Imac G3 400Mhz Mac OS X (10.2.x)
Imac 400Mhz Mac OS X (10.2.x)

hi there--
i would try setting up your account in a test user (in accounts in system preferences, just click the plus sign) to see if it works there. if it does, the first thing i would do would be to back up mail just in case http://docs.info.apple.com/article.html?artnum=301239 and then begin troubleshooting in the home folder. the first thing i would do would be to pull the com.apple.mail.plist to the desktop and restart the computer. if this helps the situation, then trash the file. if not, then put it back. let me know how that is going. [ 8 ) ]

St22 Dump in Mail

Similar Messages

Maybe you are looking for