ST22 DUMP When I tried to change settings in se03 transaction
Hello Gurus
We are facing some troubles after we done an upgrade ECC EP6, In the "old system" when we try to change settings to "no modificable" in transaction se03 appears the following dump (we have the same issue in both systems (new and old)), I show you in the next screens:
Please share your comments or advices to solves this issue.
Best Regards
Eduardo
Hi Pranay thanks for the comments
This is the Error analysis
And the "How to correct the error"
And here is the log mentioned
And the transaction you mentioned, I cheked before I post this issue and the results are: SM13 no error updates, SM12 no locks and the sm50 works fine.
Thanks for your help
Eduardo
Similar Messages
-
Wireless Router asking for different password when trying to change settings
I have an "old" wireless router Linksys BEFW11S4 V2.
I am trying to change settings using the web interface.
I can get in using the "admin" password but as soon as I try to change anything (such as SSID, security, etc) and click "Apply", it asks me for a password. This time, the "admin" password doesn't work and I get to a red screen saying I entered a wrong password. I reseted my router and came back to the default but still, I get the same thing.
...any clues anyone?
Thanks.Try upgrading the firmware from ftp.linksys.com/pub/network ..also after upgrade ...reset the router & reconfigure it ... See if it works ...
-
I had an old iPod under an old Apple ID which was stolen. I replaced it with an iPhone and apparently created a new Id under my current email address. When i went to sync the phone to my comuter (several months later), I accidentally restored the phone to my old iPod settings and lost everything. I then continued to make purchases on the phone but didn't realize that it had reverted back to my old Apple ID. This is under an old email that I no longer have access to. When I tried to change the Apple ID/email address in the account settings, it won't let me because it says that there is already an Apple ID under this address. However, all my information (settings, contacts, photos, aps) are under an incorrect email. How can I change the account I have been using to reflect my valid current email address if there is already an existing account (which I never really used) under this address? Please, I don't want to lose all my info again.
Change the email on the old account to another new, current email address.
An email address can only be linked to one Apple ID.
It is possible to have content from multiple Apple ID's on a single iDevice. -
Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
screen showing. I Need to regain The right side of the scree
I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna xHi,
When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
Regarding screen resolution, we may follow the below two articles to change it:
Change your screen resolution
Getting the best display on your monitor
Follow the steps below:
1. Open Screen Resolution by clicking the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
And if the monitor is LCD monitor, The monitor's manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor. Or we may check the monitor's manual to adjust.
Best regards
Michael Shao
TechNet Community Support -
Problem when I tried to change weblogic listen port from 7001 to 80
HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John -
lion, system preferences freezes when I tried to change wall paper,how do I fix this?
Quit System Preferences if it's running. In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following item to the Desktop:
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item. -
why I can't make a purchase on other itunes store I always get a message that "this account name can only make a purchase from the Qatari store" when I tried to change the store since the product is not available or only available in USA or Philippines
just call them...i bought my PB when it came out...but I had an issue recently and called them up and they helped me out....
Sorry can't help you with any of the other problems...mine are working fine... -
While trying to change a BOM with transaction CS02, a runtime error appears
While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1 .
Source LKED1_WRITE_CE4_BPS1U01 Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
Short dump "090618 110101 donalda 11557 " generated
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Occurred on 18.06.2009 at 11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol -
SEM CPM - Dump when i tried to assign a variable
Hi Gurus,
Im working with SEM-CPM and i facing the following issue:
When i tried to assign a CPM variable in design mode it show up the following DUMP (during the preview of the Frame) :
"MESSAGE_TYPE_X" C- "ADD_DATA_TO_BUFFER"
Does anybody knows how can i fix this ?
RegardsHola Marco,
Estoy desarrollando en Management Cockpit unos frames y me está pasando el mismo error que en tu caso.
Podrías ayudarme en como solucionarlo?
Saludos -
I purchased iphone in London one year back. Then i shifted to India recently. Now when i want to change my credit card detail in itunes, i get an error message that This card is not valid in UK. But i am no more in UK now. In the same page i edited my address but itunes does not change that details showing the above error message.
So you are trying to change the account from India to the Uk right...? Cause it wont accept UK card if you're trying to keep it for India...
-
Videos Corrupted When I Tried To Change Their Icons?
Today I tried to change the icon of an avi. file from the standard video screenshot to a normal picture. I started by changed the icon of the file in 'get info' & then using liteicon, I restarted the finder to change the image. For some reason though, all the other videos in the folder were reset to the standard avi. file icon, and appeared to be corrupt.
Since this I've removed the new icon & re-restarted finder. At first all of the avi. files had the default icon & would crash quicktime when I tried to open them. However, a few of the files have returned to their original icon; some of which work in quicktime (but give me the 'corrupted file' message in DIVX player) & some of them will play but without sound.
I realize the corrupted files are pretty much gone, but I'm wondering if anyone can tell me why this might've happened & (if possible) how I might go about changing an avi. file's icon properly next time.
Thanks
Message was edited by: Mo-DillaI was just able to open the file with an older version of numbers. I imagine that the issue is related to updating the file to the latest version of numbers / mavericks - likely due to the multiple pages and file size.
-
HT201263 unknown error (1015) is showing on my iphone 3 when im trying to restore settings
unknown error (1015) is showing on my iphone 3 when im trying to restore it
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
I uploaded a photo to my desk top as my screen saver and it was too big, when I tried to get back into iPhoto I couldnt, it wouldn't open, I closed it and tried again and it still will not open, can you help me?
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Error while trying to change settings in SALE
Hi
I am trying to trigger Idocs from QAS, ECC to XI. There are some problems with the settings.
I went to SALE -.> Logical System --> Define Logical System and reach " Display Logical Systems OverView screen.
Here under the Logical Systems, I don't see the name of the Logical System for XI QAS. I think this entry should be there, then only I can enter it next to Partner number in WE20. Is my understanding correct?
But when I try to add the Logical System name of the XI to the list, I am NOT able to do it. I don't see any option to edit it. The Dispplay- Change option under Table View is greyed out.
How do I change it and add XI system to it?
RegardsHi,
You have to follow the below steps :
1. ask basis to provide the proper authorization, or let them do that.
2. once done provide the LS name of XI-QAS,
3. Go partner profile and provide your idoc type.
4. go to port and provide the port which will be followed..
5. configure the xi system, using the idx2, idx1 transaction.
7. replicate the structure in xi and configure your xi system.
8. trigger one idoc in ECC QAS and monitor the same in xi system.
Cheers,
jay -
I tried to backup my computer and it didn't make any progress for many hours. After a few hours I gave up and closed the backup panel. I restarted the computer and now the panel comes blank with the external backup drive plugged in. If I double click
the backup folder on the external drive and click restore I keep getting the error dialogue, "The parameter is incorrect. (0x80080057)".
If I don't plug in the drive it and click Options > Change backup settings I get the same error dialogue. Note, the backup control panel displays and says the drive is not plugged in and shows the last time I attempted to backup. It says that backup was
complete but some files were skipped. The error code is 0x8100002F.
I tried to solve the problem using: http://support.microsoft.com/kb/982736/en-us It did not help.
I have looked into some of the logs and found this:
Description
Windows Backup failure
Problem signature
Problem Event Name: WindowsBackupFailure
Operation: Backup
AppVer: 6.1.7601
HRESULT: 0x81000015
TargetType: 11
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Files that help describe the problem
WindowsBackup.1.etl
This is the second to last time I backed up.
Someone else had this problem: http://www.techsupportforum.com/forums/f299/solved-windows-7-backup-0x80070057-error-546542.html
They had a restore image and could go back to an earlier time. I do not have this option.
What can I do?Hi,
I doubt this was External harddrive problem. Please check Event log about VSS error log. If there is any error message with VSS.
If so, please refer to the link below for more details about VSS error.
http://technet.microsoft.com/en-us/library/ee692290(v=ws.10).aspx
In addition, please also try to backup your system to other location for test if it had same problem. If not, it should be external drive problem.
Roger Lu
TechNet Community Support
Maybe you are looking for
-
my ex girlfriend stepped on my fone and decided to type in the wrong security code numerous times till it got locked for 23,648,410 minutes. the guy at genius bar said i should do a restore but once i done it its now stuck on "conect to itunes" scree
-
Dvd-r recorded from 8mm won't play in macbook pro?
Happy super bowl Sunday! I recently burned some 8mm footage onto a dvd-r using a samsung vhs/dvd converter. The dvd plays perfectly on all dvd players in the house but it won't play on my macbook pro or my imac. I've looked into systems to hook the c
-
Can you listen to the radio without internet on the ipod touch?
Can you listen to the radio without internet on the ipod touch? (like the nano?)
-
Hi We're testing SAP HR ActiveSync with IDM5.5 , SAP . There are two questions about SAP HR Active Sync. 1. When I started SAP HR Active Sync I can't find IAPI task instance.usually other resources makd task instance to keep last changelog-ldap or ti
-
Why am i having this problem on icloud "the maximum number of free account have been activated on this ipad"