ST22 User SAPSYS - CALL_FUNCTION_NOT_FOUND
Dear Experts,
we have couple of ST22 runtime errors. Where can I find information about the destination system since
the called Function Modules are RFC calls.
Regards
Saniye
Hi Saniye,
1.Open the St22 dump
2.Click on the source code extract.
3.Double click on the line no which is showing error.It will navigate you to a program.
4.Do a global search in the program(Binocular button) .Choose in main program radio button.
5.Search for keywords, DESTINATION ,IN BACKGROUND TASK,
6. Destinations might be hard coded or assigned to a variable.
Thus you can find the defined systems.
Hope it will be helpful.
Regards,
Kannan
Similar Messages
-
EWA Configuration... DUMPS... user SAPSYS
Hi,
I have setup the EWA report to my sandbox. Report is generating fine. I did all the setup from my own user which has S_RFC, S_RFCACL, & S_TCODE Objects. I have SAP_ALL Authorization. Everything is working fine. sandbox is generating early watch reports fine. But the problem is I am getting DUMPS in my Sandbox everyhour in 33 mins... and its dumping sooo many times. I had 147 dumps yesterday. Here is the Dump Log (ST22)
User "SAPSYS" has no RFC authorization for function group "SCUST_SYS_INFO ".
What happened?
The user "SAPSYS" attempted to execute a function module from
the function group "SCUST_SYS_INFO ", but does not have the appropriate
RFC authorization.
Error in ABAP application program.
The current ABAP program "SAPLSCUST_SYS_INFO" had to be terminated because one
of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The user "SAPSYS" has no RFC authorization for the function group
"SCUST_SYS_INFO ". Please contact your system administrator to give you
the RFC authorization for the required function groups (e.g. "SCUST_SYS_INFO
The RFC authorization object is S_RFC.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
Now i dont understand that from where this user came up SAPSYS in client 000... and we dont use client 000. strickly not allowed. I didnt use this user when generating RFS's.... Everything I did using my own user.
Please help ASAP. it is very critical...
Thanks,
Points will be posted for sure!!!Hi,
Those are the following RFC's I am using;
In Solman: SM_XXXCLNTXXX_READ- user: Blank
SM_XXXCLNTXXX_TMW - user: Blank
SM_XXXCLNTXXX_TRUSTED - user: RFC-it has all the other rfc permissions as well as the you've provided me.
In CRM: SM_XXXCLNTXXX_BACK - user: SOLMANXXX
SM_XXXCLNTXXX_TRUSTED- user: checked on Current user
Please currect me if I am wrong. I think In solution manager, the user for xxxREAD should be SOLMANSMP001 which is standard under my other system when I go to sm59..
and for XXX_TMW, I should have user: SOLTMWSMP001...
Please correct me If I am wrong.
Thanks, I really appreciate your help -
RFC_NO_AUTHORITY error for user SAPSYS in client 000
Hi
I have a lot of abap dumps in ST22 RFC_NO_AUTHORITY error for user SAPSYS in client 000 for today which I'm not sure what they mean. I don't have a SAPSYS user in client 000.
The reason that I'm concerend is we had an incident with the SAP server last night where it became unresponsive about 2.30 am and had to be manually rebooted this morning. The R3 jobs all ran OK but the BW loads failed and had to be re-run this morning. There were no unusual jobs or programs running last night and the Server Event Log does not contain any further information as to the probable cause of the problem.
I'm not sure if this error is related to the BW jobs running and was wondering did anyone come accross it and what it means.
Thanks
SiobhanCheck notes 944615 and 93254.
Rich -
Dear expert,
I read some message about user sapsys. However, i still could not understand the concept or running mechanism.
please give me a clear explanation. where can i find this user ? why was there such user sapsys in sm50?.
thank you very much.HI,
Sapsys is used for internal purpose in SAP server and is not harmful. But if it increases it can be logged off as well. But in many cases sapsys is used for OS jobs, CCMS monitoring hence it may impact if not handled carefully
SAPSYS is a group. It's used for DEV - QA - PRD to share files (especially /usr/sap/trans), for <SID>adm and ora<SID> to talk to each other and share files also.
SAPSYS is a user group name in sap os .SAPSYS is an internal communication user, which access the tables from the dictionary and give access to the users.
Check in SM21 and ST02,
Thanks
Ramakrishna. -
Hi,
We are getting below alerts
RFC/CPIC logon failed Reason=24 Type=R
client:000
user:SAPSYS
Also
RFC/CPIC logon failed Reason=1 Type=S
client:000
user:SAPSYS
what is the diff between these two alerts and what is the reason for getting this.
Regards,
ARNS.Thank you too much Rob,
But I am not able to find the answer for my case.
What I understod from the post is:
for using LDAP authentication for ciscopca, we will have to import users
from LDAP integration.
For me I do not care ( I just need to login, whether I used CUCM passwords , AD or Local I jsut need to login in any method )
but the actual scenrio is both CUCM nad CUC are integrated with LDAP and I IMPORT USERS FROM LDAP. I belive that I have problem with authintication throw LDAP ( I am not sure)
Is there any way to login using Local Passwords I do not need LDAP.
and what I should tupe to login shall I add the domain to username or no? In unity there is a feiled to enter the domain, what about Connection?? -
Failed to activate authorization check for user SAPSYS
Hi Experts
I am trying to run the sdcc, it was throwing time_out error. i have increased the work process runtime. now
i am getting a error Failed to activate authorization check for user SAPSYS.
Please help me to solve this issue.
Regards
VenkatHi, Mr. Joe Bo.
Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
Basis Patch - 15, Kernel 159
I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
Thanks & Regards
Venkatesan J -
What is transaction no buffer for user SAPSYS in transaction ST03?
Looking into transaction ST03 I find an unusual high number of transaction <no buffer> for user SAPSYS concentrated on one dialog instance during a short time frame. Can some one explain what this means?
Thanks
HarrieHi Harrie,
Have a look at the following notes:
Note 104026 - Semaphore 16 blocked by SAPSYS/high resp.time
Note 63476 - Response times too high for CPIC/RFC in ST03
Regards,
Siddhesh -
Trace deactivated for user SAPSYS
hi,
I see the following message in the sap system for one application server only for ENQ Process
I see the message in SM21
Trace deactivated for user SAPSYS
I could not find any other details of the sam
Please let me know of what can be the reason for the sameCheck Security Audit setting in SM19 to see if by any chance theres a trace enabled for SAPSYS that is failing to "activate".... Long shot but worth trying.
Regards
Juan -
What do system user SAPSYS and DDIC?
Hello,
In SM51 I can see the users SAPSYS and DDIC. Both execute continuously different reports.
Thus, also not user is logged on the system, system activity is noticed, caused by SAPSYS and DDIC.
Using ST03 you can see, which reports both processes execute regularily. But I do not have a clue, what these reports are good for. What is the purpose of SAPSYS and DDIC?
Can anybody give a detailed description?
thx, holgerSAPSYS & DDIC are pre-defined R/3 system users. User DDIC is a user with special privileges in installation, software logistics, and the ABAP Dictionary. The user master record for the above id's is created in clients 000 and 001 when you first install your R/3 System.
-
SAPSYS user+client 000+Plugin HTTP
Dear Expertise,
As a part of monitoring activity I have executed SM04 where in I found SAPSYS user from 000 client and the corresponding activity is Plugin HTTP. I wonder many simillar entries in sm04(around 40) I known he is a system user but I have very less knowledge about sapsys userid .
Please any one kindly clarify me that what is he and what he is doing at the moment? is he a good sign or harmful? how to regulate him.
Thanks in Advance
Satya207>
Julius Bussche wrote:
> What made you suspect that this is a public service? I would think that it would still be advisable to create a service user for this, to be able to start services and possibly also perform additional checks.
>
> That SAPSYS is appearing means that there is no authentication - just a session which cannot pass any authority-checks and by design cannot submit any ABAP programs either.
>
venkata satya wrote:
> As a part of monitoring activity I have executed SM04 where in I found SAPSYS user from 000 client and the corresponding activity is Plugin HTTP.
"Plugin HTTP" indicates: we are dealing with http requests (inbound).
And the fact that "user SAPSYS / client 000" is the one assigned to the taskhandler session (SM04) told me: this session is unauthenticated. So, combining both (knowning that there are "public ICF services") I've concluded that this is a public service.
Well, there are three different types of ICF services:
- those that require authentication (default)
- those that run unauthenticated (public services, operated under 000/SAPSYS)
- those that run under a configured identity (of a service user)
From the outside you cannot distinguish between the last 2 ones - in both cases you can use the service without being prompted for authentication.
And yes: 000/SAPSYS is not assigned to any authorizations. -
SAPSYS, Password logon no longer possible
I get an error info from log file dev_rfc0, it's "User: SAPSYS (Client: 000) Password logon no longer possible - too many failed attempts".
Same error info can also be found in ST22, shown below:
Runtime Errors: CALL_FUNCTION_REMOTE_ERROR
Short text: "Password logon no longer possible - too many failed attempts"
Please advise on how to correct it. ThanksHi,
Ya Just unlock the user.
Cheers
Deepanshu -
Hi everyone,
We noticed that sometimes the user SAPSYS logs on default to the SAP System.At that time System will be hanging some time it will be happening regularly how to avoid these situtation.mine environment is ecc5.0,aix with oracle.
ThankuHi,
At the time of login to sap its showing in sm04 the user SAPSYS logs on default(its showing login into some 127.**ip address) to the SAP System .At that time System will be hanging some time it will be happening regularly how to avoid these situtation.mine environment is ecc5.0,aix with oracle.
Thanku -
Hello,
On my production system (PRD) which is an 4.6C release, user SAPSYS lock many processes in SM50.
Solman 7.0 SP15 is used to monitor PRD.
I don't know what is SAPSYS uses for and how to release processes ?
Here is a extract of SM50 view on prd.
No Ty. PID Status Reasn Start Err Sem CPU Time Report Cl. User Action Table
0 DIA 2072 Complet No 1 000 SAPSYS
1 DIA 7844 Complet No 1 000 SAPSYS
2 DIA 7236 Complet No 1 000 SAPSYS
3 DIA 6188 Complet No 1 000 SAPSYS
4 DIA 7220 Complet No 1 000 SAPSYS
5 DIA 5052 Complet No 1 000 SAPSYS
6 DIA 6464 Complet No 1 000 SAPSYS
7 DIA 6332 Complet No 1 000 SAPSYS
Many thanks,Hi
SAPSYS is an internal communication user, which access the tables from the dictionary and give access to the users.
Check in SM21 and ST02,
I think it is due to the swap problem check it out.
Regards
Bhaskar -
Hi All,
i have created a trusted connection(say system A_100 and B_100,---100 is a client) as per SAP note 128447 - Trusted/trusting systems
I have all required authorisation i.e s_rfcacl,S_rfc ,s_rfc_tt.
i am able to remote logon from system B_100 to system A_100 ,but issue in when i try to logon from system A_100 to system B_100.
error is -
No authorization to log on as a Trusted System (L- RC=1 T-RC=1).
i can see run time error in system B_100 as with user SAPSYS and client 000(why it is showing this user and client )
CALL_FUNCTION_SINGLE_LOGIN_REJ
Details-
Category Installation Errors
Runtime Errors CALL_FUNCTION_SINGLE_LOGIN_REJ
Date and Time 08.08.2014 09:07:04
Short text
No authorization to log on as a Trusted System (L-RC=1 T-RC=1).
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An RFC call (Remote Function Call) was send with an invalid user ID
"XXXX " or the caller system is not registered as a Trusted System in the
target system.
Information on where terminated
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 113
of the (Include) program "SAPMSSY1".
Source Code Extract
Line SourceCde
83 COMMUNICATION SEND ID convid BUFFER header.
84 IF sy-subrc EQ 0.
85 PERFORM (sy-xform) IN PROGRAM (sy-xprog).
86 ELSE.
87 MESSAGE a800.
88 ENDIF.
89 ENDFORM. "cpic_call
90
91 *&---------------------------------------------------------------------*
92 *& Form remote_function_call
93 *&---------------------------------------------------------------------*
94 * text
95 *----------------------------------------------------------------------*
96 * -->VALUE text
97 * -->(TYPE) text
98 *----------------------------------------------------------------------*
99 FORM remote_function_call USING value(type).
100 DATA rc TYPE i VALUE 0.
101 DATA: l_syxform TYPE syxform,
102 l_syxprog TYPE syxprog,
103 l_cbe TYPE i.
104
105 * necessary variables for class based exceptions
106 DATA: l_root TYPE REF TO cx_root.
107
108 DO.
109 *
110 * with ID 'CLException' we determine, whether the caller is
111 * class based excptions or not
112 *
>>>> CALL 'RfcImport' ID 'Type' FIELD type
114 ID 'SYXForm' FIELD l_syxform
115 ID 'SYXProg' FIELD l_syxprog
116 ID 'CLException' FIELD l_cbe.
117
118 IF l_syxprog = 'JAVA'.
119 SYSTEM-CALL plugin
120 ID 'JAVA' VALUE 'FORW_JAVA'
121 ID 'RC' VALUE RC.
122 * if there is no rollout on the JAVA side which
123 * rolls both, JAVA and ABAP, we return to the
124 * C-Stack and reach this point
125
126 * in case there was an rollout, the ABAP-C stack is lost
127 * and we jump direkt to this point
128
129 * here we trigger the rollout on this Abap side with
130 * the following statement
131 SYSTEM-CALL plugin
132 ID 'JAVA' VALUE 'ROLL_OUT'
I have also referred sap note-1627901 - Trusted RFC troubleshooting
No luck.
Do let me know if additional information is needed .
Kind Regards,
SumitHi Sumit
1. Is this both system Support pack level are same?
2. As you said that you SAP_Basis 7.31 - support package level?
3. Have you check the SAP note 128447 - Trusted/trusting systems they are given ABAP runtime correction 2021691 - CALL_FUNCTION_SINGLE_LOGIN_REJ and trusted RC=1
4.
one question - why it is working in system B and not in system A.
Its may be software bug for that they give ABAP runtime correction
Regards
Sriram -
CALL_FUNCTION_SIGNON_REJECTED
We are getting the short dump CALL_FUNCTION_SIGNON_REJECTED in every 30 minute in ECC6 server (We just upgradeed R/3 4.6c to ECC6 last week). We have two application server and one CIDB server. We are getting the following short dump in both applcation server after every 30 minute:
Short text |
You are not authorized to logon to the target system (error code 1).
Error analysis |
RFC (Remote Function Call) sent with invalid
user ID "SAPSYS " or client 000.
User "SAPSYS " under client 000 from system "NPR " has tried to carry out an
RFC
call under the user ID "SAPSYS " and client 000 (Note: For releases < 4.0, the
information on caller and caller system do not exist.).
User and Transaction
Client.............. 000
User................ "SAPSYS"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4B84CF0E521C02CFE10000000A2C0A31"
Program............. "SAPMSSY1"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "NPR"
Database Release.... 701
Kernel Release...... 701
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. 000
User................ "SAPSYS"
Transaction......... " "
Call Program........."SAPLSALC"
Function Module..... "SALC_GET_MT_LIST_BY_MTCLASS"
Call Destination.... "rx1n1v3_NPR_03"
Source Server....... "dbcinpr_NPR_15"
Source IP Address... "10.44.10.10"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 1
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
| only partially available.
Pls help to fix this problem.
Thanks
AmarFor this issue please read:
"Note 1622004 - RZ20 sometimes displays a communication error", if your dump shows issues on function module SALC_GET_MT_LIST_BY_MTCLASS.
Sometimes RZ20 shows communication problems and dumps on ST22 CALL_FUNCTION_SIGNON_REJECTED appears with user sapsys and client 000, you have to check your system topology on RZ21 under technical infrastructure and change the oracle context instance (database and CCMS database Selfmonitoring) to the correct segment name database server or CI.
Kind Regards
Maybe you are looking for
-
How do I safely replace the keyboard on my laptop?
Hi everyone. I have a TouchSmart tm2-2150us laptop and one of the keys has broken. The hinge and plastic cup have broke off as well. I doubt I'll be able to fix it. I'd hate bringing it in to a shop to get fixed, so is there any safe way that I could
-
As per the above, every time I open Firefox, a box appears on the left, offering me the option to update certain add-ons. It then crashes. end of story!
-
If external monitor is placed above laptop screen, dock won't appear on external monitor
I've just migrated from PC to Mac and I've found something that drives me crazy. The dock won't appear on my external monitor if the external monitor is placed directly above the MacBook Air built in display. At home. I plug in my external monitor
-
XMLP5.6.2 - template LOV under Layout definition is always empty !
hi, I installed XML Publisher 5.6.2 + XML Publisher destop. I created a RTF template with MS WORD. I try to create a new Report (following the differents steps described by User Guide). Under Layout node, I uploaded the RTF template I created with MS
-
I have a iphone 3 and its stuck on connect to itunes on the screen. When I connect it, itunes says it cant recognize my phone. What do I do??