ST780 WL Modem - unable to connect usning Linux

Hi,
I have a ST780 - software version 6.2.16.3.
Using XP I can connect to Internet and all seems to work OK. - I have used the modem for some years like this.
I just got a laptop running Ubuntu 10.4 and find it has problems, subsequently it appears to be a problem with Vista machines and Windows 7.
The connection is made via wireless to the modem without a problem and all the PCs on the local network are seen. However the Internet connection is not made.
The only way to connect to the Internet is to manually set the DNS addresses - this is not a problem except that when the PC then sleeps or hibernates the reconnection is not made.
I have done a factory reset and made no setting changes after this.
Do I need to set something up - I don't see anything in the manual?
Is this a known problem.
Any advice would be gratefully received.
Regards
John

Apologies, I was believed that Cisco were now the owners of the Thomson series - I guess from you answer I was incorrect.
Sorry

Similar Messages

Unable to connect to linux server though tight VNC server

Hi!
I have configured VNC server 4.1 for my Linux Red hat server. VNC server is working on port 5903 and user "oracle" is allowed to connect (It means he is vncuser). while i try to connect to server using VNC it prompts to enter password. It means server is reachable. But When I enter correct password it returns Authentication Failed even though password is 100% . To confirm password I changed it using "vncpasswd" command and then I restart the vnc service by $ service vncserver start command. The service started successfully but couldn't access the server through VNC.
I checked in /etc/sysconfig/iptables and it contains entry as
-A RH-Firewall-1-INPUT -p udp -m udp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 53 -j ACCEPT
So what anything else i m missing ? What should I do ?
Thanks & Regards
Tushar

Thanks
My remote server OS is Red Hat 5.2 . And I am trying to connect to my remote host server (Red hat 5.2 ) through VNC which is installed on my local system Windows XP. I usually use putty to get command base access of my remote server. I have also configured SSH tunnel in putty so that i can connect to VNC and get GUI access of my server.
What action will taken if i run command given by you. Do I have to reboot my server, if yes then it is not possible.
$ service iptables stop
I think there is no issue of firewall. Because it asks me to enter password .That means ping to server is reachable on port 5903.
My /etc/sysconfig/vncservers file contains following entry
VNCSERVERS = "3:oracle"
And one line for display resolution.

Client unable to connect to Oracle 10g on linux

I have installed Oracle 10g on an Intel box running RedHat AS 3.0. The database installation was succesful but I am unable to connect to it from the client on my laptop running Oracle 10g client and Winfdows XP Pro. The server ip is 192.168.1.10 and I can ping it from the client:
C:\>ping attila.n3kje.net
Pinging attila.n3kje.net [192.168.1.10] with 32 bytes of data:
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Here is some info about the 2 environments:
[oracle@attila bin]$ uname -a
Linux attila.n3kje.net 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386 GNU/Linux
Server hosts file
======================================================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 attila.n3kje.net attila localhost.localdomain localhost
hostname output
======================================================
[root@attila root]# hostname
attila.n3kje.net
ifconfig output
=======================================================
[root@attila root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:C0:9F:1D:0C:C8
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13772171 errors:0 dropped:0 overruns:0 frame:0
TX packets:13748842 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1269613311 (1210.7 Mb) TX bytes:4065314800 (3876.9 Mb)
Interrupt:16 Base address:0xecc0 Memory:fe100000-fe120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5513840 errors:0 dropped:0 overruns:0 frame:0
TX packets:5513840 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:865454291 (825.3 Mb) TX bytes:865454291 (825.3 Mb)
Client TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
PRDSRR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev10g)
Client SQLNET.ORA
======================================================
# sqlnet.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
Server TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Server LISTENER.ORA
======================================================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
Results from the TNSPING command issued at the client
=================================================================
C:\>tnsping prdsrr
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:11
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dev10g)))
TNS-12541: TNS:no listener
C:\>tnsping oracle10g
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:38
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVI
CE_NAME = DEV10G)))
TNS-12541: TNS:no listener
C:\>
Trying to connect to the database from the server
==================================================
[oracle@attila bin]$ echo $ORACLE_SID
DEV10G
[oracle@attila bin]$ ./sqlplus system
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:22:29 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
[oracle@attila bin]$ ./sqlplus system@dev10g
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:23:09 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
tnsping issued at the server
======================================================
[oracle@attila bin]$ tnsping dev10g
TNS Ping Utility for Linux: Version 10.1.0.2.0 - Production on 02-APR-2004 12:3
:44
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.1.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
What am I doing wrong?
Thanks
Renato

Ok, I was able to succesfully connect to the database from the client. I made the following changes to the sqlnet.ora, tnsnames and listener. Here are the changes I made:
sqlnet.ora
==============================
# SQLNET.ORA Network Configuration File: /u01/app/oracle/product/9.2.0.1.0/netwo
rk/admin/sqlnet.ora
# Generated by Oracle configuration tools.
# NAMES.DIRECTORY_PATH= (EZCONNECT)
NAMES.DIRECTORY_PATH= (EXCONNECT, TNSNAMES, ONAMES, HOSTNAME)
listener.ora
==============================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = DEV10G)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(SID_NAME = DEV10G)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
tnsnames.ora
===========================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Here is the new problem!
I start the dbconsole using the folowing command:
[oracle@attila bin]$ ./emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://attila.n3kje.net:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................
... started.
Logs are generated in directory /u01/app/oracle/product/10.1.0/db_1/attila.n3kje
.net_DEV10G/sysman/log
When I try and access it from the client I get the following error message:
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
What am I doing wrong this time?
Your help would be greatly appreciated
Thanks
Renato

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

Unable to connect wireless print server while using wireless modem to ISP

Unable to connect an HP Laserjet 1320 thru the JetDirect ew2400 External Print Server to an imac G5 that uses the 2WIRE352 modem for ISP access thru ATT. Either the ISP is connected and works, or the printer works but no internet access. HP (after 1hr 15 min.) said I need to change/access the "infrastructure" in the OSX. Is that correct? & if so, how do I do this? Do I need to hire Apple Tech Support to do this? How much will that cost. I'm ready to send the Print Server back to HP for a refund.

I would post your issue in the Printing & Faxing forum area. More chance for some of the gurus like Greg Sahli to respond.

I have a Motorola SB6141 modem that is connected to a time capsule. I am unable to connect to the internet on my laptop and playstation 3

Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
I am unable to connect to my internet via. wifi on my Playstation.
I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
Please help?
I tried being the most descriptive I could

I am only able to connect to the internet on my main computer.
What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
When you open the airport utility on the main computer.. click on the TC what errors does it show?
They will list in the summary.
What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
What model TC do you have??
You can slow the LAN port down or specify the actual speed in the Gen1-4.

Unable to connect to Oracle using OCI Drivers on Linux

Hi Everyone!
I am facing a peculiar issue while using Instant Client on Linux ( 64Bit ) running on Red Hat 4.1.
I have downloaded the instant client version 10.2.0.3(.zip) .so files from the below URL
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxx86_64soft.html
UPloaded all the files to a directory under /opt and changed the .bash_profile file, the latest content looks like
ORACLE_HOME=/opt/instantclient_10_2
export ORACLE_HOME
PATH=$PATH:$ORACLE_HOME
export PATH
TNS_ADMIN=/opt/instantclient_10_2
export TNS_ADMIN
LD_LIBRARY_PATH=/opt/instantclient_10_2
export LD_LIBRARY_PATH
PATH=$PATH:$LD_LIBRARY_PATH
export PATH
CLASSPATH=/opt/instantclient_10_2:/opt/instantclient_10_2/ojdbc.jar
export CLASSPATH
Java.library.path=/opt/instantclient_10_2
export Java.library.path
As i have downloaded the Sqlplus utility as well, i am able to connect to the Oracle FARM via sqlplus.
On the other hand, i am unable to connect to the same database via the application. It constantly gives me the following exception,
java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1030)
at oracle.jdbc.driver.T2CConnection$1.run(T2CConnection.java:3138)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jdbc.driver.T2CConnection.loadNativeLibrary(T2CConnection.java:3134)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:220)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:438)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:131)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:77)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:296)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:220)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:164)
at com.sun.gjc.spi.DSManagedConnectionFactory.createManagedConnection(DSManagedConnectionFactory.java:105)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.createResource(LocalTxConnectorAllocator.java:68)
at com.sun.enterprise.resource.AbstractResourcePool.createSingleResource(AbstractResourcePool.java:891)
at com.sun.enterprise.resource.AbstractResourcePool.createResourceAndAddToPool(AbstractResourcePool.java:1752)
at com.sun.enterprise.resource.AbstractResourcePool.createResources(AbstractResourcePool.java:917)
at com.sun.enterprise.resource.AbstractResourcePool.initPool(AbstractResourcePool.java:225)
at com.sun.enterprise.resource.AbstractResourcePool.internalGetResource(AbstractResourcePool.java:516)
at com.sun.enterprise.resource.AbstractResourcePool.getResource(AbstractResourcePool.java:443)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:248)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:327)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:235)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:165)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:158)
at com.sun.gjc.spi.base.DataSource.getConnection(DataSource.java:108)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:922)
at org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:984)
at org.springframework.jdbc.object.StoredProcedure.execute(StoredProcedure.java:117)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO$SysParamsStoredProcedure.execute(SystemParametersDAO.java:150)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO.getSystemParametersList(SystemParametersDAO.java:67)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO.getSystemParametersMap(SystemParametersDAO.java:94)
at com.gecf.uk.pca.dcs.util.SystemParameters.loadParameters(SystemParameters.java:44)
at com.gecf.uk.pca.dcs.util.SystemParameters.<init>(SystemParameters.java:33)
at com.gecf.uk.pca.dcs.util.SystemParameters.getInstance(SystemParameters.java:72)
at org.apache.jsp.common.secure.mypayment_jsp._jspService(mypayment_jsp.java from :86)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:93)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:373)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:470)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:364)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
at com.gecf.uk.pca.dcs.web.util.SessionFilter.doFilter(SessionFilter.java:97)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
|#]
I have used the classes12.jar and ojdbc.jar which came with the download and nothing seems to work. A bit surprising when sqlplus works and not the application. I suspect there could be an issue with the driver class. I have been struggling to figure this out for days now...
Can anyone please share their thoughts if something similar was observed earlier please.
Any quick help will highly be appreciated.

ORACLE_HOME=/opt/instantclient_10_2
export ORACLE_HOMEYou don't set ORACLE_HOME with Instant Client.
PATH=$PATH:$LD_LIBRARY_PATH
export PATHThis is unnecessary.
CLASSPATH=/opt/instantclient_10_2:/opt/instantclient_10_2/ojdbc.jar
export CLASSPATHThis is wrong.
It should be:
CLASSPATH=/opt/instantclient_10_2/ojdbc14.jar:<whatever else you need there>
Java.library.path=/opt/instantclient_10_2
export Java.library.pathThis is useless; java.library.path is not an environment variable.
java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.pathThe case is pretty clear. You want to use the OCI driver (your URL starts with "jdbc:oracle:oci:"), so the Java Virtual Machine is looking for libocijdbc10.so in the Java library path but cannot find it.
What is also clear is that the program does not use the CLASSPATH environment variable you set, because then it would never have found the Oracle Driver.
So it seems that your program is ignoring the environment you set (which would explain why it also ignores LD_LIBRARY_PATH which you set correctly).
You must have the environment variables set and exported in the shell that starts the "java" executable.
Also, check that there is no other ojdbc14.jar on this machine (use "find").
To help you debug your problem, let me explain how Sun Java sets Java library path on Linux:
- If you start java with "java -Djava.library.path=/some/dir:/other/dir ...", the Java library path is set to exactly that value.
- If you do not specify -Djava.library.path, the Java library path is taken from the environment variable LD_LIBRARY_PATH.
- Directories listed in /etc/ld.so.conf have no influence on the Java library path (which gave me quite a headache in the beginning).
Do you really need the OCI Driver? If you can do with the Thin Driver (i.e., use an URL that starts with "jdbc:oracle:thin:") you don't need any shared libraries at all.
Yours,
Laurenz Albe

Unable to connect to the Linux server - getting a message - username and pa

Hello,
I am unable to connect to the Linux server - getting a message - incorrect username or password . I have used this number of times and I am sure I am using the correct username and password.However, I tried to log in this time after few months to the Enterprise linux server and got this message. I have the VMware version 2.5.0 build-122581. I am using the Enterprise Linux 2.6.9-89.0.0.0.1.Esmp OS to use the Oracle EBS R12 off it. When I click the console in the VMware it starts the Linux. While it is at the 'Network starting, stage it shows 'Determining IP information : Failed' and few lines down the line 'starting smartd': Failed as well, while others are ok. I suspect these are cause of the message 'Incorrect username or password'.
What may be the issue? How do I resolve it?
Any urgent help would be highly appreciated.
Arunasish Sircar

Hello Hussein,
I cannot copy paste as I already mentioned. However I am just typing it from the text that I see - bottom few lines.
Root Services Enabled
Root Service Oracle Process Manager for PROD_linux adopmnctl.sh started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
Web Entry Point Services Oracle OracleTNSListenerAPPS PROD_linux adapcctl.sh failed
Web application Services Enabled
Web application Services OACORE OC4J Instance PROD_linux adoacorectl.sh failed
Web application Services FORMS OC4J Instance PROD_linux adfomsctl.sh failed
Web application Services OAFM OC4J Instance PROD_linux adoafmctl.sh failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrPROD_linux
adcmctl.sh started
Batch Processing services Oracle fulfillment server PROD_linux jtffmctl.sh started
Other Services Disabled
Other Services OracleFormsServer-Forms PROD_linux
adformsrvctl.sh disabled
Other Services Oracle Metrics Client PROD_linux
adfmcctl.sh disabled
Other Services Oracle Metrics Sever PROD_linux
adfmsctl.sh disabled
Other Services Oracle MWA Service PROD_linux
mwctlwrpr.sh disabled
Service Control is exiting with status 4
I hope you can let me know how to resolve it.
Thanks,
AS

Unable to connect to wifi modem using airport

I am unable to connect modem thru' airport utility whereas other devices (laptop/phones) are easily getting connected. I am even unable to create a new network even though the password is correct, which I have verified from modem properties. Even tough modem is working fine using ethernet, App Store is not connecting giving some message about missing secure connection. Other sites, even Apple support, are working fine. Why is mac refusing to add a new preferred network? This problem has cropped up suddenly today.

Can you connect to any other wireless network?

Unable to connect to internet with cable modem

I have a Imac about 2yrs old. Was running beautifully until lately. My modem shows all solid lights but for some reason it is unable to connect. Did all the things like rebooting, takng out the power cord on my modem letting rest a minutes. Changed the setting to manual from DHCP. Changed it back the other way.
Can someone help me,
Biscuit's

Now when you plug your iBook directly into the modem, the internet works. Correct? Which Airport do you have? Try resetting your Airport. Below are some more links that should be useful...
Knowledge Base Document #106858 is the Airport Troubleshooting Guide
Knowledge Base Document #107451 on Resetting the Airport Extreme Base Station
Knowledge Base Document #106602, which explains How to Reset the Airport Base Station (Dual Ethernet)
Knowledge Base Document #58613 - Resetting the Airport Base Station (Graphite)
Airport Express FAQ
Knowledge Base Document #108044 on Resetting Airport Express
Knowledge Base Document #166602 troubleshoots I Don't See My Airport Network
I didn't know what Airport you had, so I included all of them. Select your model and try reseting it. If worse comes to worse, just do a Factory Settings Reset. You will have to configure it like you just took it out of the box. I have found that this usually fixes most AirPort problems.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Unable to connect Z10 to WIFI 2WIRE MODEM 2710HGV White color modem

Hi, I bought Z10 on 30th March 2013 with great enthusiasm. That enthusiasm didn't last as I was unable to connect to the WIFI with the   WIFI 2WIRE MODEM 2710HGV. I took the help of my service provider but couldn't solve the problem. Yesterday I went to the service provider STARHUB and they were able to connect to the internet via their server. Then I went to the BLACKBERRY expert center at the CATHAY, there also they were able to connect to their server. I have done the basic things like inputting the correct password etc. I even tried setting the home network ID on my z10 but that didn't help. Where can I go wrong?. It
Please help to resolve this problem . Thanks.

I have no idea how to send private message but here is the log.
Wi-Fi Diagnostics Logs
WI-FI INFORMATION
> Status: Not Connected
> Signal Level: -60 dBm
> Failure Reason: Connection attempt timed out.
> Profile Name: 2WIRE285
> SSID: 2WIRE285
> Channel: 6
> AP MAC Address: 00:24:56:e2:7b:d9
> Security Type: WEP
> EAP Method:
> Connection Data Rate: 0 Mbps
> Network Type:
DEVICE INFORMATION
> Physical Address: 40:6f:2a:35:72:3f
> Device OS: BlackBerry 10
> Device Pin: 24DDFFF5
> OS Version: 10.0.10.261
INTERNET CONNECTION
> IP Address:
> Subnet Mask:
> Default Gateway:
> Primary DNS:
> Secondary DNS:
> Domain Suffix:
> MTU:
> Proxy Server:
> Proxy Port:
Supplicant Logs
> 22:25:22: <3>CTRL-EVENT-BSS-REMOVED 593 16:0c:c3:e6:e7:f8
> 22:25:22: <3>CTRL-EVENT-BSS-REMOVED 592 16:0c:c3:e4:04:40
> 22:25:22: <3>CTRL-EVENT-BSS-REMOVED 582 70:54:d2:33:db:e5
> 22:25:22: <3>CTRL-EVENT-BSS-ADDED 599 64:0f:28:56:19:52
> 22:25:14: <3>CTRL-EVENT-BSS-REMOVED 579 16:0c:c3:eb:94:00
> 22:25:14: <3>CTRL-EVENT-BSS-ADDED 598 90:f6:52:78:78:1c
> 22:25:05: <3>CTRL-EVENT-BSS-ADDED 597 64:70:02:42:df:3a
  > 22:24:56: <3>CTRL-EVENT-DISCONNECTED bssid=00:24:56:e2:7b:d9 reason=0
> 22:24:56: <3>WLAN_AUTH_FAIL:UNRESPONSIVE_AP: [id=4]
> 22:24:53: <3>Trying to associate with 00:24:56:e2:7b:d9 (SSID='2WIRE285' freq=2437 MHz) [id=4]
> 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:53: <3>CTRL-EVENT-BSS-REMOVED 585 16:0c:c3:de:5c:28
> 22:24:53: <3>CTRL-EVENT-BSS-ADDED 596 64:0f:28:4c:2d:d6
> 22:24:53: <3>CTRL-EVENT-BSS-ADDED 595 64:0f:28:4b:f6:6e
> 22:24:53: <3>CTRL-EVENT-BSS-ADDED 594 64:0f:28:57:4e:92
> 22:24:49: <3>CTRL-EVENT-DISCONNECTED bssid=00:24:56:e2:7b:d9 reason=0
> 22:24:49: <3>WLAN_AUTH_FAIL:UNRESPONSIVE_AP: [id=4]
> 22:24:47: <3>Trying to associate with 00:24:56:e2:7b:d9 (SSID='2WIRE285' freq=2437 MHz) [id=4]
> 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
> 22:24:47: <3>CTRL-EVENT-BSS-REMOVED 578 00:26:50:7a:38:a9
> 22:24:47: <3>CTRL-EVENT-BSS-ADDED 593 16:0c:c3:e6:e7:f8
> 22:24:47: <3>CTRL-EVENT-BSS-ADDED 592 16:0c:c3:e4:04:40
> 22:24:47: <3>CTRL-EVENT-BSS-ADDED 591 20:aa:4b:af:b4:02
> 22:24:43: <3>CTRL-EVENT-DISCONNECTED bssid=00:24:56:e2:7b:d9 reason=0
> 22:24:43: <3>WLAN_AUTH_FAIL:UNRESPONSIVE_AP: [id=4]
> 22:24:40: <3>Trying to associate with 00:24:56:e2:7b:d9 (SSID='2WIRE285' freq=2437 MHz) [id=4]
> 22:24:40: <3>CTRL-EVENT-BSS-REMOVED 571 00:16:b6:33:a1:fa
> 22:24:40: <3>CTRL-EVENT-BSS-ADDED 590 c8:d7:19:69:eb:a7
> 22:24:33: <3>CTRL-EVENT-BSS-ADDED 589 64:0f:28:57:00:82
> 22:24:33: <3>CTRL-EVENT-BSS-ADDED 588 38:60:77:aa:60:64
> 22:24:33: <3>CTRL-EVENT-BSS-ADDED 587 16:0c:c3:de:dc:60
> 22:24:24: <3>CTRL-EVENT-BSS-ADDED 586 00:26:75:87:0d:9a
> 22:24:24: <3>CTRL-EVENT-BSS-ADDED 585 16:0c:c3:de:5c:28
> 22:24:24: <3>CTRL-EVENT-BSS-ADDED 584 16:0c:c3:de:e4:80

Linux Clients Unable to Connect to VPN

Hello all,
There are a few linux clients that need to be able to access our OS X VPN server but I have been unsuccessful at setting up a connection. I have enabled PPTP and windows clients can connect just fine, but using the linux network manager, I cannot connect, I just get a 'Connection Failed' message. I have tried both locally and via internet.
Has anyone had success connecting a linux machine to the os x vpn? Any configuration ideas? I can post the vpn logs if that would help.
Thanks
Greg

Greg,
I've never gotten this working either, and I'm surprised how little information I found after hours of googling and reading. Have you made any headway?
-Aaron

Unable to connect to Internet via Airport Express - 'cannot contact server'

I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
The connection works fine via Ethernet cable.
Any ideas?

Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
Any other ideas?

How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
Anybody has an idea of how to resolve this?
Thanks,
J

1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

ST780 WL Modem - unable to connect usning Linux

Similar Messages

Maybe you are looking for