Stabilization and Optimize Video

If the stabilization box is checked when at 100% is there any stabilization taking place? It appears as though at 100%, unchecked or checked gives the same result - no stabilization.
At 101% and above though a visible reduction in shaking can be noticed.
If "optimize video" is then chosen after stabilization, iMovie alters the frames ie. applies a tone curve without user control (iMovie '09 ver 8.0.4 (807)).
It appears both stabilization and "optimize video" cannot be reversed or converted back to the original file and both stabilized only and "optimize video" have converted the video.
Questions for advanced users:
1. At 100% checked is there any stabilization taking place?
2. When optimized are you also finding tone curve shifts?
3. Is there any way to convert back to the original file once converted after stabilization or "optimize video" have been applied?
4. Is it best then to stabilize and optimize copies instead, so that original iPhoto videos are preserved in their original formats for future renditions?
Any responses would be appreciated.

I can only comment on your first question and hypothesize about your other questions...
Stabilization works by zooming into the footage and applying translations that counter act the shakiness that you typically see. If you apply stabilization in some more advanced systems but don't zoom in at all you can see a black border around your video that shakes. In iMovie you must zoom in at least 1% to get any stabilization. The more you zoom in the more stable iMovie can make your clip but you lose more of your video. You'll need to find an appropriate trade off to make your movies look their best.
Stabilization shouldn't have any effect on the clip on your drive. It should remain untouched. The same goes for optimization. I've seen that optimize video creates another clip in the Apple Intermediate Codec format in a folder called iMovie Speed Conversion. Look for those folders. If you delete them and go into iMovie it will use your original, unoptimized clip.

Similar Messages

"AVCHD" gets choppy when I try to edit in "FCPX" ... should I import and optimize video or create a proxy media???

So I'm shooting some video on a Sony CX430
60fps & 24fps
Both on AVCHD format.
And working out of my MacBookPro
Processor 2.8Ghz (intel core 2 duo)
Mem 8GB 1067 MHz ddr3
1TB hard drive Space (440GB actual free space right now)
im having trouble editing the video. the video becomes choppy and seems to drop frames. its no where near as smooth as when i play it back on the camera itself.
1. should I be transcoding the files as I import them. ?
2. And if so, which option.
I. Create optimize media. Or
II. Crete proxy Media ?
once I have played and done some editing in FCP.X
3. Do I need to buy and use a compressor to get them burned on to a Blu Ray or DVD. ?
4. What is a good Blu Ray burner (external) I should use/buy?

#1 on my completely under powered MacMini, 2.26GHz/8GB, I'm noticing, it's faster to make the import/conversion a two-step process: step1 import, step2 after import select all clips, cmd-click, convert. If you import 'over night', I wouldn't care anyhow.....
#2 for stutter free edit, I prefer Proxies; … Optimize is only recommended when you use a seperate, ext. hard-drive, due to sheer amount of data (~220GBs/h)
#3 FCPX allows creation of DVD/BluRays - but: very simple ones, to be exact: two 'designs', just one Project, no fancy menus etc. 'Disk' isn't Apple's preferred delivery format for many years …
#4 I'm not burning disks; LG and Samsung seem to have a good track-record ...

Where is the optimize video for iMovie 10??

Hi,
I have HV20 HDV camcorder with bunch of older tapes. I had iMovie (8 or 9) before where I used to get specific options for importing the tapes.
For example, I could choose save location, add to or create new event, split days into new events, and optimize video.
Now under the new iMovie 10, I don't see most of the above options. And before you say use the older iMovie, I've looked under the application folder and I can't find the older iMovie folder.. Just the new version 10...
So I Need the:
1. Split days as new event
2. Optimize video option. (So that I can make sure I'm importing the maximum quality/ full/original size not a lower bit rate.) How do I know the new iMovie is importing the highest quality and not downsampling as the older iMovie had other bitrate options..
Please tell me where I can find the older iMovie 9 to download and install (again, I can't find it in my application folder), or tell me where I can find those options in the new versions.
Thank you

I agree but it's not there...
I know what it should do but the reality is something else at this point.
Any other suggestions?
Do you know if iMovie 10 just imports at the highest possible resolution? I don't know why iMovie 9 had the option and now the new one doesn't...
Tx

When I open my video inspector, the box for image stabilization and shutter roll does not appear. How do I get it to appear?

When I open my video inspector and I click the Video button, no options for stabilization and rolling shutter appear. Is there any way that I can get them to appear, so that I might use these tools?

Tom,
Many thanks for replying so soon. Actually, I think I've solved my little conundrum. I was selecting all of my clips in the timeline with the hope of running both functions. I found that when I only selected one clip at a time, that the two options would appear and that I could select them.
Again, Tom, thank you.
Cheers,
Rob

AE project crashes on startup - due to Warp Stabilizer and Highlight/Shadow

I've got a head scratcher here...
Firstly, I have been working on this project file for several days with no problems. Everything was running smoothly... working, tweaking, rendering... all successful.
A couple days after doing a final render, I went to re-open the project and got these two errors, followed by AE crashing:
To the best of my knowledge, I changed nothing on my system.
I've tried removing my 3rd parth plugins (Video Copilot Optical Flares, Element, etc...) but to no avail. The program still crashes when opening this file.
I've since installed the updates to AE CS 6, but still no luck.
Removing Warp Stabilizer and Shadow/Highlight allow me to open this project file (obviously telling me that its missing both).
I've tested out both plug-ins in a different file, and I'm able to open those no problem.
I'm running this on a Mac Book Pro running OSX 10.6.8
Model Name:
MacBook Pro
Model Identifier:
MacBookPro8,2
Processor Name:
Intel Core i7
Processor Speed:
2.2 GHz
Number of Processors:
1
Total Number of Cores:
4
L2 Cache (per Core):
256 KB
L3 Cache:
6 MB
Memory:
8 GB
AMD Radeon HD 6750M:
Chipset Model:
AMD Radeon HD 6750M
Type:
GPU
Bus:
PCIe
PCIe Lane Width:
x8
VRAM (Total):
1024 MB
Vendor:
ATI (0x1002)
Device ID:
0x6741
Revision ID:
0x0000
ROM Revision:
113-C0170L-573
gMux Version:
1.9.23
EFI Driver Version:
01.00.573
Any thoughts???

We've isolated the bug that is causing this behavior. It seems to only affect instances of the Shadow/Highlight effect on an adjustment layer over layer(s) with the Warp Stabilizer.
There are a couple of workarounds:
- One is to remove the Shadow/Highlight plug-in from the plug-ins folder and then open the project (and then fix the project to not have this effect on an adjustment layer over a Warp Stabilizer instance).
- Another is to precompose the layer(s) with the Warp Stabilizer effect.
We're working on a fix for this.

Optimize Video, Full (Original Size) - What Does It Do?

I've recently noticed that some of the video I've imported into iMovie '09 is "optimized" and some isn't. What's the difference?
Specifically, what does the action "Optimize Video - Full (Original Size)" actually do? If the video can already play in iMovie, and is clearly compatible with it, why does it need optimizing?
Once you optimize a video, you can't de-optimize it, right? It's a one-way street.

There is an advantage to having the optimized video: At least on my computer, it plays significantly more smoothly, and it scrubs better, too. Here's what I found for an 8.1 s clip from my iPhone 4:
Original file: 10.5 MB, 95% CPU when playing.
Optimized Large: 37.6 MB, 51% CPU
Optimized Full: 56.9 MB, 47% CPU
With the original file, the viewer is jerky when it's playing, and the red scrub bar has trouble keeping up with the mouse. With the two optimized, the viewer is smoother (but not perfect), and the scrub bar keeps up with the mouse pretty well.
I don't understand why the original is so jerky in iMovie when it plays perfectly in QuickTime. I've always had problems with jerky video in iMovie.
I will also mention another point of interest: I have compared video from my iPhone 4 with video from my Sony HDR-HC5 HDV video camera, a pretty decent HD camera that records on mini-DV tapes. I was surprised to find that the iPhone video is markedly sharper. It really looks significantly better. I will probably be taking more video using my phone now, instead of always lugging around the video camera.
Downsides to the iPhone video: Not as good in low light. Terrible orange hue in incandescent light (some posters have claimed this might be a defect, as not all phones seem to have this). "Rolling shutter" artifacts. Hard to hold steady, and worries about dropping it since it has to be held in an awkward way.
Still, it'll be great to always have a high-quality (in outdoor light, at least) video camera close at hand.

Warp Stabilizer and Speed can't be used on same clip

...just my luck that on my first ever Premiere project (CS6) I'm building a timeline and need to use both the Rate Stretch Tool and the Warp Stabilizer on multiple clips. The message, "Warp Stabilizer and Speed can't be used on same clip" took me by surprise.
However, after research here on the Forum, I found a Workaround that I'm deploying:
"Apply the effects, nest and finally apply warp stabilize" Ann Bens
Here's what I did:
In my only sequence -- Sequence 01 -- I highlighted a clip that I had already applied Rate Stretch to.
chose Clip/Nest
This created a Nested Sequence 02 with the clip in it.
In Sequence 01, the clip now says, "Nested Sequence 02"
I applied the Warp Stabilizer to the Nested Sequence 02 clip and it worked. Both Rate Stretch and Warp Stabilizer have been applied to the same clip!
So I've done this like ten times to ten clips and now have 10 Nested Sequence folders.
Questions:
Are my step-by-steps correct?
Do I let these multiple Nested Sequences just keep piling up? (when I right click on a Nested Sequence and choose Clear, I get a warning message that I'm going to delete clip references)
Now that the workaround has worked, is there a way to close -- unlink -- from these Nested Sequence folders? If so how?
I am so Over My Head for a first project. I thought you could always compound Video Effects!
NotOnSugarMountain

Best is to make a copy of the timeline or clips that you are going to multiple nest etc.
If you screw up you can easily replace nested clips etc with a copy from the copy you made.
There is an undo function but most of the time its not enough.

When I apply smoothing to a clip, it does nothing and the video frame remains static! Please Help!

When I apply smoothing to a clip, it does nothing and the video frame remains static. As opposed to moving around in order to compensate for my movement, which exposes black edges. That is what I am trying to get. Please help
These are the steps I follow. Import clip > Library > Behaviours > Motion > Stabilize. I then add the stabilize > go to inspector and change method to smooth and finally, analyze. However, it is not doing anything. My Macbook Pro was recently replaced and this is what I recall doing on my previous one, but it doesnt seem to be working for me. Is there a step im missing or something?
Thanks for any help!

Smooth is just going to smooth out a little "jitter" or jerkiness in the footage. Unless there is a lot of camera movement, you won't notice much. If you really want to see Motion go to work, change the Method to Stabilize.
BTW, once the footage is analyzed, you can make any changes you want to any of the other parameters - you don't have to re-analyze. I recommend Stabilize with Adjust: Position Scale and Rotation and Borders set to Zoom (depending on the quality of the video) — or you might consider adding a mask to the group the stabilized video is in

Warp Stabilization turn my video black, if I use more then "just stabilize".

Hey guys,
I've just started using the Master Collection of Adobes CS6 and I my first task was to stabilize a video.
So I opened it in Adobe After Effects and used the Warp Stabilizer.
Everything is fine, if I use "just stabilize". The video is shaky in it's little box.
But if I use more then that, the video turns black.
I want to use the option stabilize, crop, scale.
So, any idea what went wrong?
Thanks for reading.

Hey guys,
I've just started using the Master Collection of Adobes CS6 and I my first task was to stabilize a video.
So I opened it in Adobe After Effects and used the Warp Stabilizer.
Everything is fine, if I use "just stabilize". The video is shaky in it's little box.
But if I use more then that, the video turns black.
I want to use the option stabilize, crop, scale.
So, any idea what went wrong?
Thanks for reading.

Optimize Video not available

I have iMovie 10.0.3 (which is a nightmare), an iMac 27 with 10.9.3 and 16GB and a problem I can't solve by my own.
I want to do use the instant replay feature, but the menu is grayed out.
The potential solution should be to select "optimize video" with a right click in the events, but this option is not available. In the older version it was a piece of cake to do this...
Any idea what I can do get this option?
Cheers!

This has been going on for several weeks and no one really knows what the problem is. Use the search function on the right to find several threads discussing this.

DVI to Video Adapter and S-Video Cable = Flipping TV Screen

Hello!
I attached my DVI & S-Video Cable to my television. Everything was fine, except when choosing different display resolutions, the TV screen would start flipping.
THEN:
• I removed the DVI to Video Adapter from the computer while it was still plugged into the TV.
Now, no matter what I have tried, I get a TV screen that flips.
Any suggestions would be greatly appreciated!
Thank you!
Jeff

S-Video is the better of the two interfaces. Neither is very good when compared with a computer screen, which will have much higher resolution. I doubt you will notice much difference between S-Video and RCA Video but if you have the choice you might as well go S-Video.

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

Internet access problems and viewing video on internet

I have very limited interet access most of the time. I get a message: "You are not currently in an area that can handle data communication. ..." I have no problem with email and other features of the phone during this time. The signal at the top of my phone says "GSM". When I am able access the internet, it give me a different signal (can't remember what that is, however). Even then, I cannot view most video clips, such as YouTube clips. They will not load all the way. It states, "Error has occurred in attempting to play media." Help!

I have unlimited internet access, so that's not the problem. Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage. I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home. I've also been able to view a video clip, not successfully all the way through, however. During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot. This has also happened when the phone has not even been being used. Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did. Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips?

My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

New 27 iMAC keeps crashing iMovie and freezing videos on YouTube & Quicktime

We just got a new Sept 2013 iMac three days ago, purchased refurbished from the Apple Store online. The whole point of the purchase was to be able to use iMovie to thoroughly edit videos for our YouTube channel, use garage band, lots of internet surfing and video watching etc. We spent the extra dollars to get what we thought was the most improved version of the iMac with all the souped up specs in order to avoid any hassle and headaches from a lack of performance. Here's what we have:
3.4GHz quad-core Intel Core i7
27-inch (diagonal) LED-backlit display with IPS technology; 2560-by-1440 resolution
8GB (two 4GB) of 1600MHz DDR3 SDRAM
1TB hard drive (We have only used 80 GBs of it so far, so plenty of space left)
NVIDIA GeForce GTX 775M graphics processor with 2GB of GDDR5 memory
720p Camera & Mic
OS X 10.9
We're feeling a bit duped now as this seems to have turned out to just be a big expensive piece of junk. Here are our problems:
- Firstly, thank goodness that we had our own Logitech HD camera/mic left over from our PC because the "HD camera" built in to the iMac is worse in quality than my old blackberry curve. Grainy, lack luster, mic has sharp and distant sound, really really bad and false advertisement.
- In the middle of using iMovie (iMac came preinstalled with the newest one, i think its 10?), it will stop responding properly or will crash and close, we wont even have any other programs running.
- When opening Quicktime to record a new video, in the middle of a recording or while the recording window is idle, it will start glitching - flashing between live footage and a freeze frame repeatedly. The only way to stop it is to quit out Quicktime and open again and try to record quickly, or in some cases we have to completely restart the iMac, which then still randomly in the middle of a recording or idle window it will continue to flash and glitch. (You can view an example here in the last minute of one of our videos, we tried to make it work and kept the take since we were doing our outro music dance, but it totally ***** when this happens randomly during our content portion and we have to redo recording. http://youtu.be/MAJzaEShJGw?t=4m34s )
- When watching YouTube videos, the computer takes a while to respond to a command, like if we click on a certain part of the video, it will not load it until we press the pause/play button a few times and wait. Also at the beginning of a video it will start glitching and freezing again, similar to how we explained above in the quicktime, but faster.
If you are familiar with what could be the problem or have any advice, PLEASE HELP, we are concerned that after dropping so much money within just 3 days of use, this iMac is not performing flawlessly in the areas that we most needed and want to know if these issues are common and fixable or if its a defect that would require we send this thing back immediately. We did not get apple care and would hate to have wasted money that we really dont have on a glitchy crashing huge piece of junk.
Want to mention a few other pros and cons unrelated to our issues, for those who may be considering buying one too:
PROS:
- The Magic mouse is really great, particularly because of the scrolling and zooming gestures. (Though sometimes i accidentaly swipe in a browser and go back to a previous page losing any information that was input on the page i was originally on, for example, i had to retype this whole apple imac inquiry because i swiped backwards by mistake and the whole form cleared! annoying, wish the horizontal swipe navigated between tabs instead of going through the page view history.)
- When the imovie is not crashing, after watching some tutorials and making a few vids, its a really greatly improved program from the '09 version we used to use. I import and edit videos much faster now, and footage does not freeze or take time to load while im dragging and dropping, it is immediately responsive.
- Love using the Talk to text function (like Siri) by pressing "fn" twice. Use this to write long emails and papers with ease. Would like to see a "Speak" read back option that allows for text to be selected and read back (like Siri on iPad)
CONS:
- The text is SO small everywhere and there is no option to exactly set text size across the whole system, only option given is to set a different resolution which lessens the quality of the screen with pixelation, and some programs give you the option to set custom sized text in their individual preferences.
- Sometimes in both iMovie & Garageband, simple automated functionality will stop working, for example in iMove, when certain screens or images are dragged and dropped to the work area by the activity bar (i dont know what else to call it, the line that rolls across during playback or stays put when pressing spacebar) usually, that screen or image will click into place to align with the activity bar and will highlight the bar yellow to further communicate that alignment before you drop it, but after extended use in a session, that snapping into alignment when adding items stops working. Or sometimes you can drag and drop the ends of a title screen to adjust/trim the clip, but after extended time that too stops responding and does not let the cursor turn into that arrow that allows you to trim or extend, until after many frustrated clicks or a quit and restart.
- When sharing/exporting a video from iMovie, i would recommend unchecking the add to theatre option because it significantly extends the amount of time needed to complete the action and i found out the theatre is just like a video stream of your movies to be shared on icloud for easy access from your other devices (similar to the icloud photostream connected to iPhoto). It takes the time to make the video readily availabe in various sizes on the Mac server for easy access, which means it takes forever for your video to be exported to where you actually want it. This is not something we need and is not worth the wait time. (For example, last ime we left the theatre box checked, the progress status of the video was estimated to be completed in 351 minutes, and then 20 minutes later that somehow inclreased to 385 minutes, then duddenly it was done, so i think this add to theatre option also cause the progress status updates to go berzerk.)

Given the maximum RAM that model can use is 32GB, and the earlier release of that 27" mid-2013 iMac is nearly the same in most regards, you may note the listing of this slightly older iMac 27" is here in an Apple support document...
•iMac: How to remove or install memory:
http://support.apple.com/kb/HT1423
http://support.apple.com/kb/HT1423#1
The images of where the RAM chips are located, behind a metal plate, should be similar in your iMac and the mid-2013 iMac 27" shown in images on that page. Note there are several models discussed.
You could take the computer to a certified Apple service facility (retail store, or specialist reseller) and pay them to do this, and buy the RAM from them, and you will pay for this at a retail level. If they do it, you'd want to be assured the computer did all the things you sought to cure by upgrading RAM, correctly without fault. Like run tests and stuff.... Or there's no reason to not go ahead (after confirming from Apple) that you could buy quality RAM and do this job yourself, citing the Apple page link I'd posted above.
Contact Apple Support:
http://www.apple.com/support/contact/
You'd have to obtain the correct RAM (as indicated in my earlier post, citing MacTracker) of suitable quality for use in a Macintosh computer, and the recommendation for a DIY is to get the kit from 'Other World Computing' OWC online at their site. You can talk to knowledgable sales staff at OWC about what you have and what you need, and to help they may ask for the product serial number.
This is OWC and they have the spec RAM required for your iMac 27" model; double-check info:
http://eshop.macsales.com/shop/memory/iMac/2012_27/DDR3L
Since yours is an Apple Refurbished model it will have a different number series. Unlike those in a retail store, because Apple does that to tell what ones they refurbished; refurbs I bought online were like that.
With questions during the first three months, you can get 'support' under the initial 90-day span of ownership of the new (and certified) Apple refurbs bought online; the other part of that is 'service' for 1 year. Call a nearest retail Apple Store, to set a genius appointment; or go online, and start the process of reporting your issue, while you still have some kind of warranty on the device. They can diagnose the issues you cite and tell you if you can upgrade the RAM (as you likely can) then you can buy and install the RAM yourself and probably pay less than 1/2 the retail rate, if you get some from OWC. A diagnosis is free if the Genius looks into it, but you'd need to set an appointment & lug the iMac to their store; protected from weather/shock.
If you want to extend the complementary service to three years (less the included 90-days) and add two years of AppleCare service, that is an affordable option of about $170. For a total of three years coverage.
{If you had a 21.5-inch iMac the RAM would require a service department visit where they use a different method to install the RAM upgrade. Those are built differently than the 27-inch iMac.}
There is a bit of detailed important information in the Apple link on how to upgrade the iMac RAM. There is a certain amount of RAM installed already and these chips would likely be removed if you get matching sets of new RAM to upgrade the capacity. And no matter what some say, there is a reason why they can be upgraded with more. Even with Mavericks OS X 10.9.x and its 'memory compression' etc, it would gladly accept all the RAM upgrade chips it could swallow. (Behind metal screen, mid-bottom iMac 27")
You may need to consider questions about applications that use system resources separate from those about whatever issues your iMac seems to exhibit. There may be some other cause of the video and iMovie symptoms, but more RAM won't hurt given the beast you bought can use 32GB and it has 8.
And if it seems too much to handle, you have 14 days from date of
purchase to take it back. Contact them ahead of then, if you do.
Hopefully this helps.
Good luck & happy computing!

Stabilization and Optimize Video

Similar Messages

Maybe you are looking for