Stabilization final cut pro x

can't stabilize clips in final cut pro x
imovie stabilized perfectly but final cut pro x won't. i even tried to change the field domination override to "progressive" with no luck
any ideas?
i'm using a sony TG7 hd cam (avcdh)

Motion can create video from an image sequence and it can handle stabilization as well (usually quite well I might add).
In order for a series of images to be "recognized" as an image sequence, every file needs to be correctly named, usually something like:
ImageName_xxxx.typ where xxxx are the sequential count (and 'typ' is jpg, png, tif, etc...).
If your images aren't already named like that, then going through and doing that manually can be quite a nightmare.
I have this Automator application that will do it for you. Place all the images into a folder then drop the folder on the App Icon. The application will pop up a small dialog asking how you want the images sorted (default is by creation date in descending order - as if from a camera memory card). All the files are renamed ImgSeq_0001.xxx (any image type will work) so make a duplicate set if the original names are important. Renaming is almost instantaneous (for larger jobs you'll see a progress bar on the folder in Mavericks.)
You can download the 'Make Image Sequence' automator app from:
http://sight-creations.com/fxexchange/MakeImageSequence.zip
HTH

Similar Messages

How do I stabilize a timelapse on final cut pro?

How do I stabilize a timelapse on final cut pro? I took a time-lapse in a car, and the footage is shaky so I would like to stable it, I have created a compound clip with all the images that make up the time-lapse, but stabilization does not show up as an option. Can anyone help?

danidando wrote:
… I don't have and don't want to buy Compressor or Steeamclip or Motion?
Mpeg Streamclip is free, well&widely recommended ...

What is the best stabilization plug in for final cut pro x?

The clip stabilization in final cut pro x works ok but I need something better. Is there any third party product that will do a better job?
Thanks
George

GeorgeB79 wrote:
I tryed lock and load but is still not very good. I would like something better.
There are many who swear by this.
Russ

Artifacts in Final Cut Pro

Let me first start off by saying that I am new to the Shake realm but have been a long time editor with Final Cut Pro. With that said, I am running Final Cut 5.1.1 and I sent a clip from my timeline to Shake to use the smoothcam node. After I tweaked the clip in shake I rendered the file out node but when I view the clip in Final Cut Pro there are artifacts all over the screen. It almost looks like the video is interlaced. I put the de-interlace filter on both the original and the shake composite but it didnt do much. Any ideas?

Well, to me that after picture looks like feeding interlaced material to smoothcam without telling it. It's analysing the frame like it's progressive material as opposed to dealing with each field as a frame. At least to me, that's what it looks like.
As to the difference between SmoothCam and Stabilize, SmoothCam does an optical flow analysis of the material, then calculates movement and counters it to the degree specified. With Stabilize, you pick up to 4 tracking points, then track them, then use that to lock down the shot. If you still want movement, but want to remove jumpiness, you have to process the tracking curves to allow movement, but remove glitchiness.
Patrick

I am using HD clips from an EHD in Final Cut Pro X.

Upon importing one clip to Final Cut pro, should there be 4 clips on the EHD in the Final Cut Events Folder that look like the following?
2011-09-23 19_27_42 (id) GET INFO says,"EHD/Final Cut Events/Analysis Files/Stabilization
2011-09-23 19_27_42 (id).cbal GET INFO says,"EHD/Final Cut Events/Analysis Files/Color Adjustment Files
2011-09-23 19_27_42 (id).mov GET INFO says,"EHD/Final Cut Events/Original Media
2011-09-23 19_27_42 (id).mov GET INFO says,"EHD/Final Cut Events/Transcoded Media/High Quality Media
What about in Final Cut itself? I have clips in the Event Library that look like both of these below.
2011-09-23 19_27_42
2011-09-23 18;55;49
I am asking this question because I have merged too different events taken of the same event on the same day with two different cameras, and when I do that I get problems with missing red clips with a yellow triangle and exclamation mark !
Even if they aren't related, if someone could explain the reason for the four types of different clips above I would appreciate it. I realize it could be as simple as "that's what is produced on the EHD when you import clips and select the Analysis files for Color Stabilization, etc.
Thanks, Tracy

Since I have an 8TB Pegasus EHD that is rapidly filling up to the point that its almost full, there shouldn't be any problem to go ahead and delete the Original Media Folder after I have an Optimized Folder for that same footage is that correct?
I can now use this "Optimized folder" to produce films in the Project LIbrary with music, transitions, titles, etc.?
If I wanted to be redundant ( Engineering (of a component) not strictly necessary to functioning but included in case of failure in another component) I could put all my "Original Media Folders" on a different EHD in case I had EHD failure. Do you agree?
I couldn't resist putting the definition in parentheses because I couldn't believe how perfectly it fit!!

Final Cut Pro X exports video clip as black

Hi Everyone,
I have a big problem, I'm trying to export a project with many HD clips, the first of which is the only one being shot as AVCHD on a Sony DSLR and converted to .mov by Voltaic HD because otherwise I can't import it in Final Cut Pro X. The rest of the clips are directly imported from another camera, no conversion.
The first clip (the one I had to convert) plays and gets edited fine within FCPX, but after I export the whole project, all the part that had that clip is just black picture with no sound. My titles, photos in the meantime are still there, but otherwise all black until the next clips show up.
The sources clips are hd1080p but I'm trying to export the project as 720p. My FCPX version is 10.0.9. I've edited videos from the same source and conversion before and never had this problem.
So now I just took the same single clip into a new project and exported it at 720p and there it just works fine ... Arrrghh!! How can I fix this?

I am having an almost identical problem:
Trying to export (doesn’t matter to what: Master File, Apple Device, etc. all lead to the same result) the project I am working on is producing a black screen with no audio (for the length of the project) – only the start and end titles get rendered.
The project plays fine in FCP X 10.0.9; the initial screen on the export dialog produces a correct looking screenshot (with both the picture and title visible), and predicts realistic sizes for the export file, which ends up being tiny by comparison.
Other projects with a similar workflow are exporting fine: basically I have shot a couple of concerts, and each project is one song with start and end credits and some color correction, stabilization, etc.
The source was 1080P video from a Canon SLR 5D Mark III, and it is being exported to 1080P -- however, I don't think that's relevant, because video from the same source to the same export files worked fine before - FCP X can obviously handle the format involved.
I tried deleting the FCP X preferences -- didn’t help. I had already tried deleting the render files.
Any ideas are greatly appreciated.

SteadyCam in Motion or Shake or Final Cut Pro????

I have footage I need to steady, and I would like to know which does Steady-Cam better? Shake, Motion, or Final Cut Pro? Thank you.

Howdy,
Actually, Motion and FCP both use the same optical-flow-based stabilization technology, which is a newer version of what's in Shake. In FCP, it's called SmoothCam. In Motion, it's done via the Stabilize behavior. Also, if you've already done your SmoothCam analysis in FCP and then you send the clip to Motion, the analysis will be usable in Motion (no need to re-analyze).
The nice thing about doing the stabilization in Motion is that you can play with it while playing back, allowing you to interactively adjust how the smoothing is applied. In Shake, you'd have to make a change, render a flipbook, make another change, render again, etc.

I have a fairly new iMac wI now have iMovie events and Final Cut pro events that are duplicates. Does that mean that all my video is copied onto my hard dive twice?

If I have video in imovie and final cut pro X, does that mean there are two copies of the video, one for each piece of SW? If so, how do I get rid of the imovie events and keep only the Final Cut Pro X events (video)? I don't want multiple copies of the same video stored on the hard drive.

If you import to FCP directly from the Camera or from a camera archive, you would likely import choosing Optimized Files which would go to a FCP event that is in ProRes 422 codec. This would be in addition to your iMovie Event which would import using the Apple Intermediate Codec. So you would have two copies of the same information. An AIC copy and a larger ProRes copy.
However, if you use FILE/IMPORT/iMOVIE EVENT LIBRARY, FCP will not duplicate the event files from iMovie. It will treat them as referenced files, and will point to the iMovie Event files in the reference. So there is no duplication. You will be editing Apple Intermediate Codec files in FCP.
However, FCP will create Event folders. In addition to the reference information, these will contain thumbnail files that are compatible with FCP, stabilization and analysis files that are compatible with FCP, as well as any intermediate render files that are associated with the Event.
So in this case, there is no duplication of the large event files, but there is some duplication of the small thumbnail files.
I have several terabytes of iMovie Events, which are now all available in FCP. Believe me, I would know if they were duplicated because all my disks would be full.

Hand shake correction in Final Cut Pro 10.1.1

I see that there is this option available in iMovie but was wondering whether its there in Final Cut Pro 10.1.1. I have a number of clips that I would like to use in my project but they are rather shaky. Is there any way to correct them within the application itself or do I have to go through iMovie first?
Thanking you,
Mitaka27

The standard setting for Stabilize works pretty well but there are a few options that are user selectable.
Here is some info:
Al

Graphic problem with Final cut pro X

Hello
Since some days I have graphical problems, it seems it is related to final cut pro X (10.0.8), all other programms are running well.
When I import events to my project the graphic is ok:
After modification, example: here stabilization on, I have some colored pixels in the preview:
After this happens once, I found some colored pixel also in other programs or on the background picture.
I'm not sure if I have a problem with final cut or with the graphic card. When I use my iMac without final cut, I found no problems
Can anybody help me? Thank you

Thank you for you answer.
I have 12 GB Memory and Final Cut Pro X was working properly until now.
The problem occure already at the preview windows, as soon as I close Final cut the graphic background looks good again.
I found that I have a similar problem also with iMovie, so I think it is maybe a hardware and not a software problem.
The hardware test does not show any problems, do you know another method to test the graphic card?

Mini-Dvi to Video out from Final Cut Pro working

Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
It's working fine.

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

How to use Final Cut Pro with multiple user accounts?

Hi,
I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
Also, I want my DropBox account to back-up my media. Any tips?

I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
But I agree on your comment about DropBox. It would have been the perfect solution though.
What else is there?
I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

What's wrong with my Final Cut Pro 7.03?

What's wrong with my Final Cut Pro 7.03?
I have just started up a new project.
Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
The only "new thing" I do - is the use/brand of camera.
Now I use the canon D5 mark 3 for my project (before D5 mark 2)
What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
Final Cut Pro 7, Mac OS X (10.6.8)

Did you use Log & Import? Or did you at least convert the D5 files before importing? FCP doesn't work with those files natively.
-DH

How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

How do I get a folder to open up in Final Cut Pro version 6. I'm on a MAC OS X Version 10.6.8. The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive. When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found. Unable to import this file." When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file". What should I do or what am I not doing?
Cliff

YYou should ask this question on the Final Cut Studio forum.

Stabilization final cut pro x

Similar Messages

Maybe you are looking for