Stabilizing Footage Question: What Type of Layer?

Hello, I'd like to do a bit of stabilization on a clip.
I seem to be stumbling a bit on creating a new layer to do my tracking upon. Other than that I seem to have a solid grip on what is required.
What kind of new layer should I create to assist me in this process? A new adjustment layer?
Thanks!
Matt Dubuque
Here is a screen shot:

Here is a tutorial of mine showing how to stabilize using the Mocha tracker (which I would more recommend than using AE's build in tracker)
There is also a German Version of the tutorial (deutsches Tutorial)

Similar Messages

What type of Business Processes can be imported in Solution Manager 7.1?

Hello Together,
currently i deal with the topic: BusinessProcessMonitoring.
My question: what types of businessprocess can be imported in Solution manager 7.1?
- exported processes out of the NetWeaverDeveloperStudio?
- processes out of the CE?
Some else....???
I would be happy about some answers.
Thanks and kind regards
Henry Radziwolek

Hi Henry,
Today in Solman 7.1 onwards creation of business processes is really very and you can use the content upload interface which means you can upload the processes via excel file as well.
so you can download it from other system into a flat file and upload the same in solman to quickly do the same.
http://sapinsider.wispubs.com/Assets/Blogs/2012/January/Introducing-Content-Upload-Interface-in-SolMan-7-dot-1
in terms of importing from another solman ...if you have a transport route ...definately you can create a TR and import the project with processes into your new solman system
or if it is Solution in another system then also you can use solution transfer function/feature to import it.
Also, if you are talking about Netweaver BPM tool this requires integration setup with solman (BPB) etc to do that like ARIS integration etc.
Integrate your Business Blueprint with SAP Netweaver BPM
hope this helps you further.
Regards
Prakhar

What type of format is the PowerPC processor?

Just a simple question, what type of format is the PowerPC processor? I know Intel processors on later Macs is GUID.

Apple Partition Map is the PowerPC partitioning scheme equiv to GUID on Intel Macs. However, the format is normally Macintosh HFS+ (Journaled)

Importing and stabilizing footage from Pre Pro CC to AE cc.

Greetings to all you aftereffects and premiere Pro cc experts. I have a question that is probably very easy to answer, but for the life of me I can't figure it out. I have some footage that was poorly shot that was given to me that runs about 60 minutes in length. I need to stabilize about three minutes of that footage in the middle. How do I go about getting just that three minutes into aftereffects to stabilize it? Do I need to cut the footage and then render out just those three minutes? When I try to import it now into aftereffects and apply the stabilization feature it tries to analyze the entire 60 minutes. Also, any help that you can offer on the best way to stabilize footage in general would be appreciated.

MichaelCozzi wrote:
Do I need to cut the footage and then render out just those three minutes? Also, any help that you can offer on the best way to stabilize footage in general would be appreciated.
While Sz is correct, I usually find it best to restrict stabilization to a specific clip instead of relying on Premiere's interactivity with AE.
So.
Yes, trim the small section and make that three minutes a completely separate and self-contained movie.
STabilizing is a complicated art these days because there are so many options. I like Warp Stabilizer but the process may take several attempts for you to get what you want. Stabilized footage requires rotation and horizontal and vertical movement. How well and thoroughly these characteristics are processed are user adjustable although the results are not always predictable. Stabilization will lead to scaling the media to fill the screen and the smoothness of the changes is totally adjustable, too.

What type of plug in do I need to use between weblogic and tomcat please

Hi,
Can anybody please tell me what type of plugin do I need to install to communicate between Tomcat4.0 and weblogic6.1 sp2.actually I wanted to use a connection pool from my servlet on my local tomact where connection pool is created on remote weblogic server.........?
I have no idea what to do. I tried including the weblogic.jar in my local classpath where my tomcat is sitting. This didnot work . I got the following error......
I want to know is it possible.............?
javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory]
Your response is very inportant......
Thnaks

Thanks a lot for your rely....
then how could I use the remote connection pool in my
local Tomcat server.....?If thats is not possible then
what if organisation have two webservers...? you mean
thay have to create connection pool in two servers
rather on one server and use it every where.....?
Still depends on what you are trying to achieve.
Most clustered systesm use a connections on each server. They sync the data retrieved between servers, not the connections themselves.
If you simply one a single connection point then you need to use a driver that proxies requests to and from the real connection point.
RmiJdbc is free at http://www.objectweb.org/.
There are commercial drivers available, search at http://industry.java.sun.com/products/jdbc/drivers, which provide an enterprise layer for database access. They are probably more robust and feature rich than the above one.

What type of DVD should I use for Windows Backup?

I am wanting to do my Windows Backup and I was wondering what type of DVD media I should use. Is it better to use a RW or only R type DVD.
I have an HP Omni 220-1180qd, A5W89AV#ABA, running Win7 64 bit.
I thought I read it can use CD's, DVD's but I want to know which would be the better choice.
Thanks for any help and all help is appreciated.
This question was solved.
View Solution.

Honestly, an external hard drive would be a better choice. The difference between +R and +R/W is that +R is "Recordable" and +R/W is "Re-Writable". If you intend on making periodic backups, go with an extrernal hard drive... If you intend on making very few backups, consider the DVD+R discs.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

What type of screwdriver do I need to install AirPort/Bluetooth Card A1126

My airport extreme card was causing kernel panics, and I discovered one antenna wire was unplugged, but without unscrewing the card, I'm unable to plug the antenna back in. My question is what type of screwdriver do I need to unscrew the card? I have a 17" iMac G5 without the built in iSight and the layout is exactly like the one pictured in this DIY guide : http://manuals.info.apple.com/en/imacG517inchharddrive.pdf
Thanks for any help you can provide! :-D

Thank you for the link, but they only list a DIY install guide for the original iMac G5. My airport/bluetooth card is very similar/almost exact to the card found in the iSight iMac G5s.
My logic board layout looks exactly like this http://manuals.info.apple.com/en/imacg517inch_PowerSupply.pdf as opposed to http://manuals.info.apple.com/en/imacG517inchAirPort.pdf where the airport card is much larger and doesn't require a special screwdriver for replacement. I'm not really in need of install instructions, but rather what specific screwdriver/allen wrench is needed to get the card off the board.
thank you guys for any info you can provide...

What type of soundcard ?

Dear all,
bit of a silly question, but can someone tell me how to connect 5 speakers to my laptop ?
I bought the Logitec X 530 speakers ( total of 5 ).  I am not sure , but the Logitec manual says that with a
2 channel soundcard i wont hear the sound from the rear speakers.  I am not sure what type of soundcard
my machine has.   Was this a waste of money then ? the subwoofer and two speakers work fine.
Would be nice to have the other three speakers working as well.   any special devices need for this ?
And where would i find out what soundcard my laptop has ?
laptop is HP G61-410SA Tango.
thanks for your help and best regards from
kentishtown

mreibsamen wrote:
It's phantom powered with a little "in use" light. Got it on ebay for dirt cheap. I'm using it to power my behringer C-1U usb mic, and my sony dynamic stereo headphones. both appear to be recognized and have power to them yet still having the crackling problem
In that case, I'd definitely, definitely get an external power supply for it. You're running this with a notebook, and just because the USB spec says you can take 500mA out of a USB port doesn't mean that manufacturers are obliged to provide that much - and in the case of anything portable, they invariably don't. And if you are running Sony dynamic headphones, you are probably using up pretty much all of the power that the laptop can provide. Not only that, but the power supplied to run the device this way is subject to an electronic 'negotiation' with the PC - and the results of this can vary dynamically; another source of weird things happening.
It's pretty common to find that the majority of USB hub problems evaporate when a sensible power source is applied!

What type of antivirus software do I need for a MacBook air 2015?

I have a new MacBook air 2015. What type of into virus software do I need? What is sophos?

What type of into virus software do I need?
Nothing your MBA doesn't already have. Avoid everything else.
There will always be threats to your information security associated with using any Internet - connected communications tool:
You can mitigate those threats by following commonsense practices
Delegating that responsibility to software is an ineffective defense
Assuming that any product will protect you from those threats is a hazardous attitude that is likely to result in neglecting point #1 above.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "clean up", "speed up", "optimize", "boost" or "accelerate" your Mac; to "wash" it, "tune" it, or to make it "shiny". Those claims are absurd.Such products are very aggressively marketed. They are all scams.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources.
Illegally obtained software is almost certain to contain malware.
"Questionable sources" include but are not limited to spontaneously appearing web pages or popups, download hosting sites such as C net dot com, Softonic dot com, Soft pedia dot com, Download dot com, Mac Update dot com, or any other site whose revenue is primarily derived from junk product advertisements.
If you need to install software that isn't available from the Mac App Store, obtain it only from legitimate sources authorized by the software's developer.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iCloud, iTunes, or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose:Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
The same precaution applies to Adobe Flash Player. Newly discovered Flash vulnerabilities appear almost weekly.
Beware spontaneous popups: Safari menu > Preferences > Security > check "Block popup windows".
Popup windows are useful and required for some websites, but unsolicited popups are commonly used to deceive people into installing unwanted software they would never intentionally install.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever receive a popup window indicating that your Mac is infected with some ick or that you won some prize, it is 100% fraudulent. Ignore it.
The same goes for a spontaneously appearing dialog insisting that you upgrade your video player right this instant. Such popups are frequently associated with sites that promise to deliver "free" movies or other copyrighted content that is not normally "free".
The more insistent it is that you upgrade or install something, the more likely it is to be a scam. Close the window or tab and forget it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. Most of these attempts are pathetic and are easily recognized, but that hasn't stopped prominent public figures from recently succumbing to this age-old scam.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Is there a way to track down what type of content was sent in an iMessage?

Is there a way to track down what type of content was sent in an iMessage?
There was some data sent (that I saw from my cell phone provider) at around 7AM one morning while I was in bed. I am concerned as to what this data was and would like to find out if it is possible to trace what the content was? My cell provided indicated that they do not know what type of data it was.

Hello Michael:
I have not yet seen a
good approach to using that information (short of
deleting the account).
better search some yourself Barry <G>
if something runs fine in another account - one can isolate the cause to one of the plist files in the main acct Home/Library/Preferences/ or possibly an add-on in Home/Library/Internet Pug-Ins or ...Input Managers for example.
If there is the same problem in the new acct - you can discount anything with the main acct user library - plists,caches,plugins,input managers, the whole lot.
A useful tool is Console - found in Applications/Utilities/ keep it running while the 'problem' in question crops up & see if any messages pop up in either the system log or console log. Sometimes these will point straight at the problem area, other times no help at all.

What type of WS Security can be used for RPC Webservice?

Hi all,
I have 2 issues.
1)I was given a RPC webservice that I have to consume and expose it has WSI Webservice. I am unable to do the transformation from RPC webservice to WSI webservice in Eclipse.Are there any documents that helps me in transforming the RCU to WSI.
2)Anyone know What type of WS-Security can be applied for a RCU webservice in OSB?If there is one,Can u please share the documents.
Thanks,
Krishna

Hi Krishna,
Have a look at this:
http://docs.oracle.com/cd/E17904_01/doc.1111/e15866/transports.htm#BEIFHBAI
What's an RCU web service?
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points.

What type of encryption is using in Oracle Application (EBS)?

Dear all,
I am using oracle application version 11.5.8 and the oracle database version is
9.2.0.4. When I am login the oracle application, what type of encryption is?
How can I know?
Best Regards,
Amy

As standard? None.
Are you talking about password encryption in 11.5.8 ? It's a reversible encryption algorithm.
Are you talking about the network layer? Only if you've setup to run https mode.
Gareth

What type of word processing does Macbook Pro offer?

I want to switch to Mac and was wondering what type of word processing does Apple have on their MBPs'.

Hi!
This exact question was asked earlier in the week. If you do a search you can find it. The MBP comes with a trial version of iWorks Pages), and TextEdit.
http://discussions.apple.com/thread.jspa?messageID=2743826&#2743826
http://discussions.apple.com/thread.jspa?messageID=2158511&#2158511

What types of NFC tags does the Lumia 920 support?

I bought some Mifare Classic 1k tags online hoping I could write and read some custom tags with the few apps on the marketplace but it doesn't seem the Nokia interacts with them well.
I found this on wikipedia.
"At the moment BlackBerry phones and the Nokia Lumia 610 can't read/write Tectile stickers ". (which are apparently based on Mifare Classic.)
I have found no other mention of what types of tags are supported, so that is my question. What types of tags are guaranteed to work with the 920?

I've run some NFC tests with the 920 because I run an NFC marketing platform.
I wrote a review about the Lumia 920 NFC implementation http://www.tagonic.com/latest/easyblog/entry/nokia-lumia-920
Although this doesn't cover specific NFC tags I can confirm that it works well with MiFare UL tags. The use case of receiving a contact directly, and directing to web destinations works well.
Interestingly we haven't managed to successfully initiate a pairing with other NFC accessories (BH505 headphones or the 360 Speaker) at all. We'd be interested to know if anyone else has this issue.
But from a tag perspective we are confident that the Lumia 920 works with the MiFare UL tags.
Feel free to contact us at [email protected] if you are looking for some tags that you want to program to go to a web destination. We'd supply them pre-programmed and you can virtually re-program them using the platform as opposed to having to physically re-write the tags.

I am looking for what type/setup of Read/Write command in RSLogix 5000 to be used with the NI Ethernet I/P Driver

I am working on trying to get LabView to communicate with an Allen-Bradley Compact Logix PLC using the NI Ethernet I/P driver. I am currently getting errors on both system of a CIP Message instruction error and cannot determine if the problem is in the PLC or the NI. At this time we are leaning toward the PLC, thus I was wondering if anyone new what type/setup of message read and write to utilize.

Hello jabcae,
Thank you very much for posting your questions.
I recommend posting to the PLC Manufacture’s forums. They will be able to provide more insight on the PLC code.
I also recommend posting this question to the Industrial Communications forum:
http://forums.ni.com/t5/Industrial-Communications/bd-p/260
That forum is monitored by the developer’s of the EtherNet I/P Toolkit. They will be able to assist with the LabVIEW programming.
Regards,
Thomas C.
Applications Engineer
National Instruments

Stabilizing Footage Question: What Type of Layer?

Similar Messages

Maybe you are looking for