Stable ati driver installed, but still issues

Hi folks
I followed this guide: https://wiki.archlinux.org/index.php/AMD_Catalyst
and everything went smoothly, everything installed fine and the accc is showing my graphics card and lets me change the settings.
Now i only installed it because i could not get flash videos to play smoothly on full screen, it was by default using the ati-dri driver. No matter what i tried i could not sort this issue so i installed the stable amd catalyst driver and control centre. It boots fine but videos are still choppy (when on full screen) and the movement of windows around is slow and tearing. i followed the instructions on the the wiki to fix these things but nothings has worked.
before installation of the driver window movement was smooth also
I assume if the driver was not installed properly i would not even be able to boot into a gui? everything looks pretty its just when i come to drag windows about and like i say watch youtube.
Cheers guys, i can post more info later if needed.

neoroses wrote:Should i just start the whole process again in a fresh install?
No, there shouldn't be any reason to do anything that drastic. If the open source Radeon driver works well for you then I think it would be a better idea to use it instead of the Catalyst driver. Just uninstall the Catalyst driver and install the Radeon driver.
What computer are you using? What video card are you using?
What are you trying to watch? If it's just things like YouTube videos then consider using a helper application such as "youtube-dl" and using a video player such as "mpv". You'll still be able to watch the video while it's downloading, but you won't have to deal with those stupid clunky sometimes-works sometimes-doesn't Flash video players. I don't know how anyone does.
Ha, I just realized, you're dealing with Flash for Linux (which is kind of deprecated and not being developed any more) and Catalyst for Linux(which is kind of deprecated and not being developed any more). Sounds tricky.

Similar Messages

Did a clean install but still find imac slows significantly as the day goes on. first projects go pretty well. later

did a clean install but still find the imac slows as the hours pass. using photoshop cs5 and lightroom3,
working w/some large files, but previously-like months ago, there was not this slowing problem. even
the internet slows later in the day. and small moves in a program start to take forever. anyone experience this
issue? or have any thoughts on it? thank you

How much free space do you have on your drive?
From the sounds of your problem is sounds like you are approaching a full disk.
Allan

Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone.

My iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.

my iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.

What version of iPhoto are you using? 9.6 is the current version.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.iPhoto.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". Ihave re-installed but still receive the same message. Any ideas please.

I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". I have re-installed but still receive the same message. Any ideas please.

Make sure your user account has full administrative permissions. Then, at this stage of the game, I would take the following steps:
- Re-create the Preferences file following these instructions:
Re-create the Photoshop Elements preferences file to eliminate problems that a damaged preferences file might cause.
Note: When you use this solution, Photoshop Elements will create a new preferences file and you will lose custom settings associated with your current preferences file. However, the file you rename in step 2 is your original preferences file. If you determine that the preferences file is not causing the problem, then you can restore your custom settings by undoing the instructions below.
To re-create the Photoshop Elements preferences file:
Quit Photoshop Elements.
Locate the Adobe Photoshop Elements preferences files. In Photoshop Elements 5.0, there are two preferences files, one for Organizer and one for Editor:
Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Organizer\psa.prf
Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Editor\Photoshop Elements 5 Prefs.psp
Rename the extension for the files (for example, to psa.old).
Start Photoshop Elements. Photoshop Elements creates a new preferences file.
I doubt that this will fix your problem, however, it is always the first thing to try. If it does not, take these steps:
- Uninstall Photoshop Elements
- Run the Windows Installer CleanUp Utility (http://support.microsoft.com/kb/290301)
- Reinstall Elements
- Reinstall the 5.0.2 patch
Good luck,
Juergen

Updated but no Camera Raw 8.6. Downloaded and installed but still no CR 8.6.?

Updated but no Camera Raw 8.6. Downloaded and installed but still no CR 8.6.? LR 8.6 wants me to install before sending to PS CC 2014. Any thoughts?

See if this thread helps you at all:
Where has Adobe HIDDEN the Camera RAW 8.6 update (again!)?

Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!

Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

Try resetting the Yahoo password. Yahoo not infrequently has problems.

SetupApi.dev.log error message on driver install, but driver runs fine anyway... why?

Hello,
I am trying to run down the cause of the following warning/error message I see in my SetupApi.Dev.log file after I install a commercially signed driver.
!    sig:           Verifying file against specific (valid) catalog failed! (0x800b0109)
!    sig:           Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
I see this error against all the files in the driver package, but the driver operation has so far been just fine.
I have checked the certificate chain for the driver (there are 3 certificates in the chain: a root, an intermediate, and the code signing certificate I purchased, all from Verisign/Symantec), and compared the root and intermediate certificates against ones
that are already installed on the machine where I installed the driver.
Using the MMC, I can see:
- the root certificate is located at:         Console Root->Certificates-Current User->Trusted Root Certification Authorities->Certificate
- the intermediate certificate is located at: Console Root->Certificates-Current User->Intermediate Certification Authorities->Certificate
- the code signing certificate is located at: Console Root->Certificates-Current User->Trusted Publishers->Certificates
This all seems to make sense to me for as much as I've been able to research from the MSDN, so would there be some reason why this message shows up, yet the driver seems to install and operate correctly anyway?
I am using VS 2012 Pro on top of Windows 7 (x64) Pro SP1 to perform the driver build and code signing.
Thanks much in advance for reading this, and for any insight/advice you might have about this.
Geoff

Hi Pavel, Jason, and Bryan,
I apologize for not getting back to this sooner, I got side tracked with a different task for a few days...
I really appreciate your looking at my problem.
I did some more digging and contacted VeriSign/Symantec for some assistance and learned
I had a few things set up improperly with respect to my code signing certificate.
VeriSign pointed me to a few links to straighten out my code signing certificate's chain of trust on
my code-signing machine, and then they also pointed me to a couple links similar to the one
Bryan provided here for the cross-signing certificate I needed.
The links are provided below for reference (in case somebody else can make some use of them too)
1. Disable root cert, so my certificate's signing chain of trust shows up:
https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=SO16958&actp=search&viewlocale=en_US
2. Get the correct intermediate certs insalled:
https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=AR1739&actp=search&viewlocale=en_US
3. Get the correct X-signing cert from MSFT (same dert as the one Bryan provided in his link):
https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=SO16763&actp=search&viewlocale=en_US
https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=SO5820&actp=search&viewlocale=en_US
I'm building/signing this for Release, on a Windows 7 x64 platform. I am doing this using the
Windows 8 WDK and VS 2012 Professional. It's a nice combination, as it automates the driver
signing process.
My driver is a package of files, and is signed with a CAT file.
I wanted to be sure the files were signed correctly, so I ran "signtool" over each file in the package
to verify the signing is correct. I've included the output from one of the files here. Save the filename,
the output is identical for each file in the package.
The signing certificate chain shown below matches my code-signing certificate chain when I examine it
using the MMC-certificate snap-in.
The cross certificate chain shown below is identical to the output from the VS 2012 IDE. Note the MFST X-signing
certificate is in this chain from step 3 above, it's the second one from the top in the chain.
============================================
output from signtool verification of package
============================================
C:\Users\Me\Desktop\Driver\Package>signtool verify /v /kp /c mydriver.cat fileA.bin
Verifying: fileA.bin
File is signed in catalog: mydriver.cat
Hash of file (sha1): nnnnnnnnnnnnnnnnnnnnnnnnnnnn
Signing Certificate Chain:
    Issued to: Class 3 Public Primary Certification Authority
    Issued by: Class 3 Public Primary Certification Authority
    Expires:   Wed Aug 02 17:59:59 2028
    SHA1 hash: A1DB6393916F17E4185509400415C70240B0AE6B
        Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
        Issued by: Class 3 Public Primary Certification Authority
        Expires:   Sun Nov 07 17:59:59 2021
        SHA1 hash: 32F30882622B87CF8856C63DB873DF0853B4DD27
            Issued to: VeriSign Class 3 Code Signing 2010 CA
            Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
            Expires:   Fri Feb 07 17:59:59 2020
            SHA1 hash: 495847A93187CFB8C71F840CB7B41497AD95C64F
                Issued to: My Company
                Issued by: VeriSign Class 3 Code Signing 2010 CA
                Expires:   Thu Jan 15 17:59:59 2015
                SHA1 hash: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
The signature is timestamped: Tue Mar 05 15:25:53 2013
Timestamp Verified by:
    Issued to: Thawte Timestamping CA
    Issued by: Thawte Timestamping CA
    Expires:   Thu Dec 31 17:59:59 2020
    SHA1 hash: BE36A4562FB2EE05DBB3D32323ADF445084ED656
        Issued to: Symantec Time Stamping Services CA - G2
        Issued by: Thawte Timestamping CA
        Expires:   Wed Dec 30 17:59:59 2020
        SHA1 hash: 6C07453FFDDA08B83707C09B82FB3D15F35336B1
            Issued to: Symantec Time Stamping Services Signer - G4
            Issued by: Symantec Time Stamping Services CA - G2
            Expires:   Tue Dec 29 17:59:59 2020
            SHA1 hash: 65439929B67973EB192D6FF243E6767ADF0834E4
Cross Certificate Chain:
    Issued to: Microsoft Code Verification Root
    Issued by: Microsoft Code Verification Root
    Expires:   Sat Nov 01 07:54:03 2025
    SHA1 hash: 8FBE4D070EF8AB1BCCAF2A9D5CCAE7282A2C66B3
        Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
        Issued by: Microsoft Code Verification Root
        Expires:   Mon Feb 22 13:35:17 2021
        SHA1 hash: 57534CCC33914C41F70E2CBB2103A1DB18817D8B
            Issued to: VeriSign Class 3 Code Signing 2010 CA
            Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
            Expires:   Fri Feb 07 17:59:59 2020
            SHA1 hash: 495847A93187CFB8C71F840CB7B41497AD95C64F
                Issued to: MyCompany
                Issued by: VeriSign Class 3 Code Signing 2010 CA
                Expires:   Thu Jan 15 17:59:59 2015
                SHA1 hash: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Successfully verified: fileA.bin
Number of files successfully Verified: 1
Number of warnings: 0
Number of errors: 0
=========================================
As best as I can tell, this follows the kernel mode signing walkthrough doc, and assuming
VS 2012 is doing the signing correctly, the driver package should have been signed correctly.
The problem is, I still see the same error on the target machine.
I've tried manually installing the code signing certificate in the target's Trusted Publisher Store,
prior to installing the driver, but this does not keep the error from showing up.
I honestly have no clue why. If the driver package files check out OK with the signtool on the signing
machine, I'm at a loss for why the error shows up on the machine where I'm installing the driver.
One other thing that is different is the code signing certificate's certification path When I insepct
it on the target machine. It appears to have a different Root and (only one) intermediate certificate.
The Verisign folks said this is "OK" because different machines have different certificates. I'm not
sure I'm buying this statement. Does it make sense to you guys?
The folks at VeriSign also told me I do not need ANY of the certificates used in signing the driver to
be installed on the target machine. Does this make sense to you guys? I'm a little skeptical about
that assumption too, but I haven't found any information on line to confirm or negate it.
I'm really no further along in determining why I'm getting this error on my target machines.
Does anything here look out of place to you?
I'm half tempted to manually sign the driver package to is there's something going on inside the VS 2012
IDE that could be causing this.
Again, thanks for taking your time to read this.
Geoff

Have songs on my hard drive already, but still has iCloud icon next to it in iTunes...

So I'm confused as to how iTunes Match should work apparently. I have it turned on and it works fine, but all of the songs in my iTunes library (connected to airport extreme) says they are in the iCloud instead of local. So then if I press the download button for that song, it downloads it and duplicates the song on the hard drive! How weird! Why wouldn't it just point to the file on my hard drive since it's already there?
Or once we turn on Match, should we go and delete our entire local library? I'm just confused.
I also thought I could play them and it would show as downloaded by pointing to the hard drive version, but no dice. Apparently it only streams from a Mac.
The whole reason this is an issue (besides *** backwards functionality) is I am trying to export a playlist and it only shows downloaded songs in the text file, not songs in iCloud, even though all the songs are on my hard drive!
Anyway, and ideas would be great.
Thanks,

sadcaper wrote:
With iCloud, is there a need to backup music anymore? If you lose your hard drive, can't you just download it again from iCloud? That was my impression at least.
Read this: FAQ: Why iTunes Match Can Not Be Used as a Backup. If you care about your data you'll still keep local backups of all your personal data. Cloud storage is nice and all that but Apple doesn't market iTunes Match as a backup solution and because the matching is not 100% accurate nor does the service store Apple Lossless files, it is not a viable backup solution. For cloud backups you want a company like Backblaze or Mozy or one of the others available who are backup solutions.
sadcaper wrote:
Currently both MBPr and iMac have the iTunes Media folder pointed to the Drobo. However, I did notice that some music files were downloaded locally on the MBPr, which I think are from the auto download feature. Not sure though.
Yeah, the home sharing thing may work. I wanted for both machines to be able to see purchases from either machine, or iPhones. That's why I wanted them to share a library. So if I bought a song on my laptop, I could run upstairs and see if on the iMac as well. Maybe library sharing is the best way to do that however.
Keep in mind that any purchases made on the MBPr will be downloaded, and with automatic downloads turned on purchases from other devices will also be downloaded. Right off the top of my head I don't know if this will result in duplicate downloads, but as long as the MBPr is on the local network and iTunes has the library pointing at the Drobo it will all go into the same spot. BUT... if you make a purchase on the MBPr while away from the local network that purchase will be downloaded to the local internal HDD.
So a variation on the theme I talked about above is to, perhaps, not make any purchases on the MBPr and turn off auto-downloads for purchases and keep iTunes Match and Home Sharing enabled. This will enable you to access the music library while home and away and not keep any media on the internal HDD.

Argggg ,DKU-2 driver installed but cannot locate d...

can anyone tell me what im doing wrong ,i have started from scratch so many times now.
I am on 98SE ,phone is 6230 ,the cable is a DKU-2 for USB connection.
The cable driver install o.k as far as i can see but when i plug device into port it goes to install wizard and cannot find the driver.
There seems to be no connection between the driver and phone.
My wife is going to murder me ,ive been on this computer for 2 days !!!.

i am getting no wireless communication devices being created after downloading the cable driver.
After downloaded and plug cable and phone in it goes through installwizard telling me no drivers could be found.
Has anyone had success sorting this issue ?

Trying to put pics on a flashdrive and keep getting error that there is not enough free space when there is. I tried to empty trash with the flash drive in but still not working. Help!

Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!

How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
Clinton

Nokia Connectivity Cable Driver repaired but still...

Hey there, I had moved messages stored in the phone to PC via Nokia Suite before, however I got a nokia connectivity problem so nokia suite cannot detect my phone/search it via bluetooth now. I tried to fix it by using the method of repairing ‘Nokia Connectivity Cable Driver’ but it doesn't work. Everything went smoothly but still nokia suite cannot detect anything. So I may need to reinstall the whole nokia suite but the main concern is that if I reinstall my nokia suite, the SMSs stored in the Nokia suite will lose is it? So may i know what I can do?
Phone: Nokia 5800 XpressMusic
Version of Nokia Suite: 3.8.48 (should be the latest)
Computer: Windows 7
Thanks.

Thanks however, the problem is that Nokia Suite cannot detect my phone so how can it copy the text to the clipborad?

Archive and install but still no right or left scroll

HI I have Archived and installed but also did preserve users and network setting and Safari is still the same with no right or left scrolling available. I am using Safari 4.0.3(5531)
Help
George

Even tho you did an Archived and Installed, you'll still using the old user account. Something in your user account might be corrupt preventing the scroll from showing up in Safari. Make a new user account in your System Preferences/Accounts and see if that new account brings back the scroll bar.

Stable ati driver installed, but still issues

Similar Messages

Maybe you are looking for