STACK/GROUP PHOTOS BY LIGHT CONDITION

Is there any method to group/stack the photos by the light condition? I thought something about grouping by histogram similarities...
what I want is a way to put together bright photos, and the dark ones... in a way I can just adjust one and sync.
THANKS

Similar Messages

Capture better photos in low-light conditions

The camera in your device provides several modes and settings to help you take photos or record videos in most conditions. When the lighting conditions are poor, refer to the following tips:
Use Normal capturing mode instead of Scene recognition capturing mode. Once you are in Normal capturing mode, use the Party scene setting and/or the Multi autofocus setting for better results.
Use Fill flash mode.
Use the Infinity focus setting when recording videos.
Use the camera key correctly. Press the camera key halfway down to activate the auto focus setting. Press the camera key fully down to take a photo when the focus is locked correctly.
Your subject should be as still as possible while you are taking a photo.
Your camera should remain as steady as possible.
To use Normal capturing mode
Activate the camera.
Hold the phone in landscape orientation.
Drag the slider button at the top right of the screen accordingly so that the still camera is selected.
Tap the capturing mode icon at the top left of the screen, then select Normal.
To use the Party scene setting
Make sure the camera is in Normal capturing mode.
Press the Menu key, then select Scenes.
Tap Party.
To use the Multi auto focus setting
Make sure the camera is in Normal capturing mode.
Press the Menu key, then select Focus mode.
Tap Multi auto focus.
To use Fill flash mode
Activate the camera.
Hold the phone in landscape orientation.
Drag the slider button at the top right of the screen accordingly so that the still camera is selected.
Press the Menu key, then select Flash.
Tap Fill flash.
To use the Infinity focus setting
Activate the camera.
Hold the phone in landscape orientation.
Drag the slider button at the top right of the screen accordingly so that the video camera is selected.
Press the Menu key, then select Focus mode.
Tap Infinity.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

The FAQ is general and available options can differ depending on what phone you have.
When using manual mode for video recording in Xperia Z1 you can select between Single auto focus, Face detection and Object tracking. Which one you should select depends on what your filming.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Grainy isight in low light conditions?

Hi,
Do you guys notice grainy isight pics and videos under low light conditions? I was just wondering if this is an isolated defect or if this is just because apple decided to go with a crappy camera. BTW my isight pictures look no where as good as the one found on the Apples Macbook Pro site. http://www.apple.com/macbookpro/isight.html

bsmit007: Please consider rewarding some points by pressing on one off these buttons on top off my previous message:
Apple: Why reward points?
With Google Image's you can find a lot sample's off the iSight camera!
For example: http://www.macpro.se/wp-content/macbook_camera.jpg
This one is quite similar to the quality off mine average photo.

How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

In iPhoto '11: Select the photo in the "Faces" stack, open the "Info" panel, click on the face name in the "faces" brick and then on the name below the face to edit the name.
Regards
Léonie

How do you stack different photos in the editor layers pallet

How do you stack different photos in the editor layers pallet? I can get different photos in the editor, but I cannot figure out how to get different photos into the layers pallet at the same time. Please help!!!!!

Just to clarify, you can never see the layers panel for more than one photo at a time. The suggestions you got will show all the photos, but because they are now combined as layers in one image.
If you want to see more photos in the editor at once, go to the preferences>general and turn on Allow Floating Documents, then go to Window>Images>Float all in windows, then Cascade or Tile.
But you will still only see the layers panel for the image that is active at the moment.

How to group photos in folders, in the main photos app in my iphone4 ?

How to group photos in folders, in the main photos app in my iphone4 ?

You can update your iPhone to iOS 5, in iOS 5, it will allow you to create albums in your photo app and it also allows you to move the photos from album to another album

Hover mouse over a group photo & individual image pops up?

My project is to do a mouse hover over individual faces on a group photo and display an image of what that person looked like back in high school.
So far I am able to display the persons name as I hover over their face but don't know how to also display their individual image.
I set up an image map with circular hotspots for each face.
Please visit www.phsclassof1956.com/50th_group.html
Any help would be appreciated.

You could do this very easily with Tooltips on an Image Map. See example below and mouse over Image Map of South America.
http://alt-web.com/testing.html
Scripts and documentation here:
http://www.walterzorn.com/tooltip/tooltip_e.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Group photos together

Hi,
I am making a movie made up of A LOT of still images, much like a stop motion animation. I am wondering if it is possible to group photos together once I have them how I want them so I can move them around like a single video clip.
Or will I have to export it as a small video clip and import it again to do this?
I'm using FCP 5.1 by the way
Thanks in advance

As reink says, exporting is the best way. Unless you have filmed these yourself as a stop motion animation as continuous jpeg file numbers, in which case you can import them into motion as an image sequence, resize the whole clip (not individual frames) and export as a video file from there.
cheers
Andy

10.6.7 bugs "Illuminate keyboard in low light conditions"

After I update to 10.6.7, my backlight keyboard from my MBP, make problems.
So, I enter on System Preferences > Keyboard > Keyboard and then I deactivate "Illuminate keyboard in low light conditions". After this I use the manual commands from F8, F9, F10. When I use manual, the "Illuminate keyboard in low light conditions" active again.
Conclusion: even when I use manual commands for keyboard illumination, that option activate only. Any key I press when that option is not active, it`s activating only.
So I think that a bug...
Message was edited by: Dorin Andreescu

Hi, here I have the same behavior, and I also think it's a BUG, because if I configure the machine to manually adjust the intensity of something, I expect the machine to behave like I want and not like it WANTS.
This is almost the same as the first time I installed Windows 95, that shi7 take over the control of my computer!
I want to CONTROL my laptop!!!!!

IPhoto to iDVD photos too light

I've burned photos to iDVD with moderate success in the past. My recent effort produces images that are much too light on my TV. Any suggestions apart from darkening all my images?

Hi mreib:
Just a few guesses here:
How do your images look on the monitor prior to importing to iDVD? What is the source of the photos? Photoshop? Jpeg? Pict?
Perhaps your monitor is not calibrated correctly making the processing of the photos too light once viewed on the TV?
Calibrate your monitor
http://www.danslagle.com/mac/iMovie/tips_tricks/6008.shtml

Inconsistancy of illuminated key board in low light conditions

I have several accounts on my power book and my administrator account has onyl a dim key board in low light while the other accounts have a bright light. I have checked to turn this function on under keyboard preferances. Does anyone know what I can do to get this to work in my account. It does not seem to be a hardware problem, since it works fine in other accoounts. is there any function which controlls the brightness of the keys in low light conditions???

http://discussions.apple.com/category.jspa?categoryID=120

After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

If you are using a standalone version of Lightroom, you may have updated with the CC-licensed update. That will not work. If this is your situation then it will be necessary for you to uninstall Lightroom and then install an update from a different website. Assuming that you are using Lightroom 5, this is where you need to download from:
Product updates
After you make the change you will be able to continue from where you left off. The switchover does not affect your images or your catalog.

How can I merge 2 group photos in Photoshop Elements 12?

How can I merge 2 group photos in Photoshop Elements 12?

In the Editor: Enhance> PhotoMerge> PhotoMerge Group Shot
In the Organizer: Edit> PhotoMerge> PhotoMerge Group Shot
Here's the Adobe TV link on the feature - http://tv.adobe.com/watch/learn-photoshop-elements-11/perfect-group-shots-with-photoshop-e lements-11-/
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How to disable others from changing group photo?

Hi I'm new, I apologize if this is the wrong section to ask this..
In some of my skype calls which I administrate, people will just change the title and group photo to whatever they want, (usually inappropriate).
Is there a way to disable the function so that only I can control stuff like the group/conversation photo and title?

Hi,
Did you mean that once users first log on Windows 8.1 and IE 11 pops up? Did this issue happened after logging off then logging in and shutting down the PC then restarting to login?
What’s the detailed information about the pop-up? The screenshot would be more helpful for us to determine the issue.
We can check if there is any logon script or task schedule configured in your environment.
For further help you, please provide more information about how you deploy Windows 8.1.
Meanwhile, please help to collect the boot trace for further research.
How to collect a good boot trace on Windows 7
http://blogs.technet.com/b/jeff_stokes/archive/2012/09/17/how-to-collect-a-good-boot-trace-on-windows-7.aspx
Once down, please upload the .etl file into SkyDrive or Similar ones and share the public link here for our research.
Look forward to your response.
Kate Li
TechNet Community Support

Very much a beginner. How do I cut someone out of a group photo and move them to another part of the same photo?

I have a group photo and I would like to move someone from one side of it to the other. I would like to know how to select that person, cut him out, and paste him in a different place on the picture. Is that possible? If so, how? Thank You!

Try this
Photoshop Help | Content-Aware Patch and Move

STACK/GROUP PHOTOS BY LIGHT CONDITION

Similar Messages

Maybe you are looking for