Stack images in Bridge is not possible

I,m trying to stack some images in Bridge, but the "stacking-menu" is not active. What am I doing wrong?

Hi,
Apart from maintaining entries for Route determination with Weight group in SPRO - Logistics execution module, you need to make sure the delivery type (for eg. LF) has been configured with     """ New route determination possible with (or) without check """" in t.code 0VLK.
Hope, this helps!
S. Siva

Similar Messages

  • Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge-do not want to lose images on compact flash card.

    Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge…do not want to lose images on compact flash card.

    Give #navbar a width that is wide enough to hold all of the buttons within it.
    #navbar {
         width:####px;
    Replace #### with a pixel number large enough to hold the nav buttons.

  • Adobe Bridge is not fuctiong correctly, I need to reinstall CS2

    I have Adobe CS2, I recently took a ton of pictures in Large and Raw with my Canon Camera. When I upladed then to my computer and wanted to work on the .RAW images my Bridge will not allow me to adjust the .RAW images.  I am assuming I need to reinstall my CS2.  How do I do this with out losing my activation codes.
    Thank you

    No, do not uninstall/reinstall.   What you need to do is reset preferences.   Hold down the Crtl key and start Bridge.  You will get a reset window, choose all 3 options.  That should get you back to normal.

  • AppleScript Bug: Duplicating stacked images to albums

    for anyone else using AppleScript, I encountered this bug a couple of nights ago. I've reported it to Apple.
    14-Feb-2009 02:14 AM Gregory Charles Rivers:
    Summary:
    The Aperture/AppleScript "Duplicate" command when used to add stacked images to albums does not work as expected.
    (1) when stacked images are successfully added to the target album, they are added as masters rather than simple album items.
    (2) if the source project is not selected in the Inspector, stacked images will not be added to the target album.
    (3) "Duplicate" is not a suitable command for adding objects to albums and confuses scriptors. an additional "Add" or "Assign" command should be created expressly for this purpose.
    Steps to Reproduce:
    * begin of steps to reproduce *
    PROBLEM #1
    1. [APERTURE] import 3 masters into a new project called "Gregory"
    2. [SCRIPT] in a script editor, get the new project's ID:
    id of every project whose name is "Gregory"
    -> "UkRHKvb/RfmZ8H+Jn/pxRA"
    3. [SCRIPT] get a list of the images in the new project:
    every image version of project id "UkRHKvb/RfmZ8H+Jn/pxRA"
    -> a list of 3 objects
    4. [APERTURE] create two albums within the project:
    -> "Album 1" and "Album 2"
    5. [APERTURE] stack the first two images.
    6. [SCRIPT] add only the first image to "Album 1"
    copy every image version of project id "UkRHKvb/RfmZ8H+Jn/pxRA" to theImages
    duplicate theImages's first item to album "Album 1" of project id "UkRHKvb/RfmZ8H+Jn/pxRA"
    -> the stack that image 1 is a member of, is added to the album, but it's not a normal 'linked' album item.
    7. [APERTURE] delete the image from "Album 1" by selecting the image and pressing "Delete" on the keyboard.
    -> a warning is sounded but nothing happens. with normal album images, they're simply removed from the album.
    -> "Remove from album" is greyed out in the Images menu.
    8. [APERTURE] select the first image of the stack within the album and press Command-Delete.
    -> a dialog is presented confirming that the images inside the album are masters.
    confirm.
    -> the image is removed from the album, and from the project!
    9. [APERTURE] select the remaining image and press Delete.
    -> the image is removed from the album without affecting the master as would normally be expected.
    (the work-around for removing 'masters' from the album is to unstack them after which they become 'normal' album items again.)
    PROBLEM #2
    10. [APERTURE] import the first master again, back into the same "Gregory" project.
    -> we now have 3 masters in the project.
    11. [APERTURE] stack the first two images.
    12. [APERTURE] within project "Gregory", select "Album 2".
    13. [SCRIPT] add all 3 images to "Album 1" (while "Album 2" is still selected within Aperture).
    copy every image version of project id "UkRHKvb/RfmZ8H+Jn/pxRA" to theImages
    repeat with i in theImages
    duplicate i to album "Album 1" of project id "UkRHKvb/RfmZ8H+Jn/pxRA"
    end repeat
    -> only the unstacked image is added to the album.
    14. [APERTURE] select the project "Gregory".
    15. [SCRIPT] run the script again.
    copy every image version of project id "UkRHKvb/RfmZ8H+Jn/pxRA" to theImages
    repeat with i in theImages
    duplicate i to album "Album 1" of subfolder "nested" of project id "UkRHKvb/RfmZ8H+Jn/pxRA"
    end repeat
    -> all of the images are added to the album.
    -> the stacked images are still 'masters' rather than simply album items.
    PROBLEM #3
    the "Duplicate" command should be used for adding images as links to objects such as albums. the use of the "Duplicate" term for this action leads to confusion. an additional "Add" or "Assign" command should be created for this specific purpose.
    * end of steps to reproduce *
    Expected Results:
    whether stacked or not, images added to albums should be simple linked items, not masters, and which when deleted by pressing Delete simply disappear from the album without affecting the true masters.
    Actual Results:
    (1) stacked images added to albums are added as masters instead of linked items.
    (2) stacked images cannot be added to albums if their containing projects are not selected in the Projects inspector.
    (3) the use of the term "Duplicate" when applied to adding items to albums is confusing because the images aren't actually duplicated.
    Regression:
    Unstack all images before running any script that adds stacked images to albums.

    I have noticed behavior with drag-and-drop working anomalously different for me than as reported by others. It has not yet been problematic, but definitely anomalous.
    It sounds like the Aperture team should forget features improvements for a while and focus on stability.
    -Allen

  • Collection of stacked images cannot be exported

    I've been thinking my catalog is corrupt for the last five hours, but now I think there's a different problem. My catalog passes integrity checks and can be backed up and optimized and everything - the only problem is with stacking.
    I created a collection, and added all my stacked images to it. I tried exporting the collection as a catalog - fail. I tried selecting all the images in the collection and exporting that - fail. I tried selecting all the images in the collection, switching to "All Photographs" so that I was not in a collection context, and exporting only those selected images - fail. I seem to be able to export any other combination of images and/or collections just fine.
    There's a problem with exporting stacked images, but I'm not sure what it is.

    I had about 250 stacked images that I added to a collection. I expanded all stacks, selected all the stacked images, and a created a collection from the selected images. The following steps are in the original post. I can export one or two stacks here and there, but trying to export all the images in the collection (as a collection or as a 'select all') fails.
    I have my collections set to back up every time I open Lightroom, with verification. I've also optimized the catalog a couple of times. It still doesn't report any errors.
    The system is a MacBook Pro CoreDuo 2.16 GHz, 2 GB RAM, ATI graphics card, OS X Leopard 10.5.6, and Lightroom 2.2.
    Thanks for trying help! I'm at a loss.

  • Bridge CS2 not showing all images

    After a crash of my PC (Windows XP  Home), I had to re-install Photoshop CS2.  Now, however, when I'm  trying to review images in Bridge (in filmstrip view) only some of the  thumbnails appear as photos; the remainder appear only as icons.  There  appears to be no consistency; some are PSD files, some are TIF files.  The rotating "clock hands" on the lower left (when images are loading)  do not even appear in those cases.
    Any idea how to get this back?  It's  really tough reviewing images when I can't even see them! 
    Thank you in  advance for your help.    --Dennis

    Great!   

  • Help - Adobe Bridge will not delete or reject images (win7)

    Hi there everyone, I have a new problem that it seems nobody else has ever had as I can't find any support via google or yahoo.
    As a photographer the issue is quote inhibiting.. Basically when I go to delete an image in bridge, it comes up with 'are you sure you want to send this image to the recylce bin' and I click 'yes' then it moves to the next image.. just like its supposed to BUT the image I 'deleted' has not moved from the folder.. it has not gone.
    The same happens if I try to 'reject' an image. and yes I have 'show rejected images' selected.. yet just as with delete, when I try to 'reject' an image nothing happens.
    * If I hit the delete button, 'do you want to reject this file or delete it?'
    If I hit reject OR delete.. nothing happens.
    If I hit 'control and delete' it asks me if I am sure I want to delete it.. then the fires remain.
    I have a laptop with adobe Bridge on windowsvista, and no problem. My old pc was on windows xp and no problem.
    This problem seems to be specific to windows7?
    Does Adobe bridge
    VERSION CS4
    not support win7?

    I have had the same problem with Windows 7  64bit until I figured it out about 15 minutes ago.  It has to do with file permissions that are set automatically by Windows.  If you go to "My Computer", find the root folder that your photos are in, right click on the folder, and select "Properties" from the context menu, under the "General" tab, you will probably see that the "Read Only" box is checked.  You will need to uncheck it and select "Apply". When it prompts you, select that you want this applied to all folders below the root photo folder. I assume you have your photos in multiple folders under a main folder.  Then select the "Security" tab on the same "Properties" menu. You need to make sure that the users listed (you have to select them one at a time if there are several) have permissions to modify the files.  I found this out after I completed the unchecking of the "Read Only" box and went back to Bridge.  It didn't work until I went back and made the corrections under the "Security Tab".  I hope this explanation isn't too muddy.  Feel free to ask me for clarification or, for that matter,   I am sure people in the forum can give you more erudite explanations of what I just wrote.

  • Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

    Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
    I use a lapto (windows 7) 64-Bit operating system.
    Thank you,
    my email is: [email protected], if you send me the answer to my query

    You need to activate Photoshop.
    Mylenium

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • I am trying to batch convert cr2 to jpg. in bridge i go tools ps image processor and it returns a message "Image Processor.jsx could not be found." I updated cc to no avail. i am on mac 10.7.5

    I am trying to batch convert cr2 to jpg. in bridge i go tools>ps>image processor and it returns a message "Image Processor.jsx could not be found." I updated cc to no avail. i am on mac 10.7.5

    I go to file scripts but there is no option there for Image Processor

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Bridge Raw not working, cannot see Raw image in Bridge

    The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

    My Photoshop and bridge is CS4, purchased in 2008, and the canon 5D Mark
    11, purchased earlier. I have CR2. The camera and software worked
    together fine for all those years.
    Now, however, when I click Bridge to open a file containing several
    images, I do not get thumbnail images, just a circle with CR 2 and the
    file name, no image.
    If I double click one of the circles, the image will open in camera Raw,
    and I can edit, and open photoshop and edit again. If I then save a Jpeg
    version, I will be able to open it and see the image in Bridge.
    The problem is that now if I shoot 100 pictures, I can open Bridge but
    there are no thumbnail images, only CR2 and file name.
    I hope this can clarify the problem. Camera and software have not been
    changed.
    Thank you very much. Please help.

  • The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

    The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

    I never notied that icon before, and I've been using Bridge for 7 years.
    Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
    To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
    http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
    This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
    If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
    PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

  • I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

    I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

    What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

  • Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?

    Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times?  I have never had any where near this amout of trouble with all my other Canon digital cameras. 
    <Removed by Moderator>

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Mylenium

Maybe you are looking for