Stack overflow user profile doesn't display correctly

The page of Stack overflow user profile is wrongly displayed, blank space on top of page and some info is hidden.

I see what you mean. It appears that the drop-down which says "Summary" is pushing that block of content off to the right (sometimes you can see a sliver of it at the right edge of the page). That problem doesn't occur in the stock Android (2.3.4) browser.
If I use a Fennec useragent string in the User Agent Switcher extension, I can replicate the problem on a desktop browser (''Firefox 13 beta 4''). The drop-down is floated within a container that uses 100% of the width of the screen. The next element floats up alongside the <select> rather than dropping down beneath it because that next element doesn't have a specified width or minimum width.
StackOverflow can solve this problem by editing its CSS to include a clearing rule:
<br>.inner-wrap {
padding: 5px;
overflow: auto;
'''clear: left;'''
However, as end users, I don't know whether there is anything we can do.
This problem has appeared in sites for years, and it seems unlikely that Firefox will change the way it handles floats to work around developers who forget to clear them. (Guessing as to what the developer must have wanted was something that IE did for years, but I think even Microsoft is starting to require developers to pay closer attention.)

Similar Messages

  • User Profile Synchronization not displaying Title field correctly

    Hello,
    I've an issue with User Profile Synchronization (SP 2010). The Title field is displaying correctly for most of the users but still there are few user for them the Title field is blank. However in "User Information List" it displays the Title field
    properly for those users. But in Central Administration when I check the User Profiles it's blank.I have already run Full Profile Synchronization few times in Central Administrations. Every time it's shows as successful but still no luck, still the Title field
    is blank for some profiles.
    Can anybody help on this? Thanks in advance.

    Hi ,
    Firstly , I need to verify the followings:
    Whether the title field of user information list is changed if you type a value in user profile page and perform full sync.
    Whether you have upgraded to SharePoint 2010.
    If you have upgraded to SharePoint 2010, you need to make sure the user information list is mapped or connected to AD directly. More information, please refer to the post below:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/926abf50-83a0-4e9c-a4cb-4848fcf4f88d/sharepoint-2010-userprofile-title-field-empty?forum=sharepointgeneralprevious
    If this issue still exists, please create a new User Profile Services Application, and compare the result.
    Here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/0b9b5747-80b2-4a2e-8e8e-c918bc9d6cbd/user-profile-synchronization-not-working-correctly?forum=sharepointadmin
    http://blog-sharepoint.blogspot.in/2010/08/user-information-list-not-synchronised.html
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • WRT54G version 6 - router setup screen via Internet Explorer 7 doesn't display correctly

    Hi,
    I've just set up my WRT54G router.  I'm able to connect to the internet and I'm able to connect directly to the router via IE but the setup screen doesn't display correctly.  I've tried resetting the computer and updating the firmware but it still doesn't display correctly.  Almost all of the text is missing except for the Linksys logo and a few drop down menus.  Any help/suggestions would be great, thanks.

    Hi gang,
    There a number of things that you can do to solve this problem but most of them involve changing the rules that you have already configured in your ZoneAlarm profile. My preferred solution is to:
    -unplug your router from the WAN (why not?)
    -turn off zone alarm
    -access your router's administration page at http://192.168.1.1
    -find the admin page where you can switch admin access from http to https
    --- **save your changes !!**
    -reboot your router
    -plug the WAN cable back into your router
    -turn ZoneAlarm back on
    -access your admin page at https://192.168.1.1 ( note the 's')
    Bob is your sister's brother! Your admin page should work as it is supposed to. Your router and ZoneAlarm should be playing nicely together. You haven't borked your finely tuned zonealarm rules. You were going to bookmark your admin page anyway, and if you want to allow remote administration, you would want to use https anyway. Nothing is broken and you fixed two things. "Its a good thing."Message Edited by ubuibi on 12-27-200609:10 AM
    There are really only 10 kinds of people in the world;
    Those who understand binary and those who don't.
    ubuibi

  • [SOLVED] urxvt doesn't display correctly some special characters

    Hello everyone,
    I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
    Here is a comparison between xfce4-terminal and rxvt-unicode  (I used theses characters as exemple):
    xfce4-terminal :
    urxvt :
    And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
    !Font
    URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
    !General
    URxvt.scrollBar: false
    URxvt*imLocale: fr_CH.UTF-8
    URxvt.saveLines: 5000
    URxvt.geometry: 95x26+50+50
    Has someone an idea what the problem could be?
    Thank's in advance.
    Last edited by mwm (2013-11-13 13:15:48)

    This is what I think is happpening.
    PragmataPro may not contain those glyphs.  It appears to have a wide array of glyphs but it is not unicode complete.
    Xfce-terminal is a vte terminal.  When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font.  Urxvt will only use the glyphs in the font or fonts specified.  If PragmataPro does not contain the glyphs, urxvt will display boxes.
    You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify.  Here's an example from my urxvt configs:
    urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
    xft:WenQuanYi Bitmap Song:size=8, \
    xft:FreeSerif:style=Regular, \
    xft:unifont:style=Medium:antialias=false
    I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me.  This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

  • Vim doesn't display correctly utf8 characters

    Hi,
    I don't use an utf8 locale, but some files (like latex sources of my reports) are in utf8 for compatibility with other pcs. Since a while, but i cannot recall exactly when (normally, I don't use vi for latex), it doesn't display correctly such files. Emacs does, kate does, but not vim. I tried to set encoding and file-encoding in vim, but it didn't fix the issue. Any clue? Is vim broken?
    Related question. It is safe to switch to utf8 locale (I mean, in rc.conf) months after the installation?
    domanov

    lang2 wrote::set enc=utf8
    It didn't work (as i said in my previous post).
    I changed from it_IT@EURO to it_IT.UTF8 in rc.conf, restarted and now vim is fine (the corresponding line in locale.gen was already uncommented and I rerun locale-gen just to be sure). Now man pages are really ugly, even worse if I erase the option -Tlatin1 from NROF line in man.conf (as suggested in the man.conf manual). Ok, let's deal with that, now.
    Do I risk to broke anything more important? Shall i convert to utf-8 all the text files in /home, /etc and so on??

  • Youtube doesn't display correctly since I installed latest version of firefox

    youtube doesn't display correctly anymore...adobe flash has been updated and java is enabled. This is what it looks like now...
    "Loading...
    Videos
    Music
    Shows
    Trailers
    Live
    All Categories
    Categories "

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Custom ErrorDocument doesn't display correctly

    I have created a custom ErrorDocument 401 to use in
    .htaccess. After the user cancels out of the login screen in
    Firefox or Opera, they are redirected to the authreqd.html file for
    the custom error message. However, when that page is diplayed in
    Firefox or Opera, none of the background images load. The Alt text,
    when available, is shown instead. Why would the images not load for
    this file when they work correctly for all other links.
    Interestingly, when you type in the URL and go directly to that
    page, it does display correctly.
    P.S. Safari doesn't load the custom error page at all. An
    incorrect username/password returns the login screen repeatedly,
    and cancelling returns you to the page you were previously on.
    Here is the custom error
    file

    There are tonnes of possibilities and many websites with suggestions. I tried all sorts of these option (clear cache, clear cookies, anti-virus changes, page style options etc) with no success until eventually I accidentally changed my character encoding autodetect (firefox 6) from "off" to "universal" and everything is fine.

  • 32bpp application doesn`t display correctly or crashes when we remote via SCCM 2007 remotetool

    By default remotetool’s Color Depth is set to 16 bpp
    Daniel
    Synapse application is a PACS viewer used by radiology department in our hospital.
    Synapse is designed to run in 32 bpp, therefore when we remote to it, the picture is not dispayed.
    Instead it displays an error Your display is configured for 65536 colors. This mode is unsupported. Use 24 or 32 colour mode.
    As soon as we disconnect or end the remote session. The picture on users workstation 
    turns black. Synapse needs to be re-launched  in order to display properly again.
    Is there a way to set the Color Depth default  on remotetool to 24bbp ?
    When we close the remote session, Synapse crashes or doesn’t display any pictures, leaving them black.
    Here’s how the user would see it
    On the other hand if we pre-set the colour depth to 24bbp before opening Synapse. Everything is displayed correctly on both admin and the remote workstation, while in a remote session.

    Yes, I know this is an old post, but I’m trying to clean them up.
    To my knowledge there is no way to do this, however I would suggest looking at remote desktop instead of CM0-7 Remote control.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SVG text doesn't display correctly in Illustrator

    The following SVG (generated via Cairo) displays correctly within browsers (Firefox and Safari), but not within Illustrator: the glyph symbols are drawn at the wrong scale, upside-down, and on top of one another. Is the problem within the SVG file itself? That doesn't seem likely, given that the browsers have no problem with the file. If the problem is within Illustrator... what is the root of the problem, and is there any possible workaround?
    <?xml version="1.0" encoding="UTF-8"?>
    <svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="700pt" height="700pt" viewBox="0 0 700 700" version="1.1">
    <defs>
    <g>
    <symbol overflow="visible" id="glyph0-0">
    <path style="stroke:none;" d="M 11.3125 -9.078125 C 8.914062 -9.078125 7.253906 -8.800781 6.328125 -8.25 C 5.410156 -7.695312 4.953125 -6.765625 4.953125 -5.453125 C 4.953125 -4.398438 5.296875 -3.5625 5.984375 -2.9375 C 6.679688 -2.320
    312 7.625 -2.015625 8.8125 -2.015625 C 10.457031 -2.015625 11.773438 -2.597656 12.765625 -3.765625 C 13.765625 -4.929688 14.265625 -6.476562 14.265625 -8.40625 L 14.265625 -9.078125 Z M 17.21875 -10.296875 L 17.21875 0 L 14.265625 0 L 1
    4.265625 -2.734375 C 13.585938 -1.640625 12.742188 -0.832031 11.734375 -0.3125 C 10.722656 0.207031 9.488281 0.46875 8.03125 0.46875 C 6.175781 0.46875 4.703125 -0.046875 3.609375 -1.078125 C 2.523438 -2.117188 1.984375 -3.507812 1.9843
    75 -5.25 C 1.984375 -7.28125 2.660156 -8.8125 4.015625 -9.84375 C 5.378906 -10.875 7.410156 -11.390625 10.109375 -11.390625 L 14.265625 -11.390625 L 14.265625 -11.6875 C 14.265625 -13.050781 13.8125 -14.101562 12.90625 -14.84375 C 12.00
    7812 -15.59375 10.753906 -15.96875 9.140625 -15.96875 C 8.109375 -15.96875 7.101562 -15.84375 6.125 -15.59375 C 5.144531 -15.351562 4.203125 -14.984375 3.296875 -14.484375 L 3.296875 -17.21875 C 4.390625 -17.644531 5.445312 -17.960938 6
    .46875 -18.171875 C 7.488281 -18.378906 8.476562 -18.484375 9.4375 -18.484375 C 12.050781 -18.484375 14 -17.804688 15.28125 -16.453125 C 16.570312 -15.097656 17.21875 -13.046875 17.21875 -10.296875 Z M 17.21875 -10.296875 "/>
    </symbol>
    <symbol overflow="visible" id="glyph0-1">
    <path style="stroke:none;" d="M 16.0625 -9 C 16.0625 -11.1875 15.613281 -12.898438 14.71875 -14.140625 C 13.820312 -15.378906 12.585938 -16 11.015625 -16 C 9.453125 -16 8.222656 -15.378906 7.328125 -14.140625 C 6.429688 -12.898438 5.984
    375 -11.1875 5.984375 -9 C 5.984375 -6.820312 6.429688 -5.113281 7.328125 -3.875 C 8.222656 -2.632812 9.453125 -2.015625 11.015625 -2.015625 C 12.585938 -2.015625 13.820312 -2.632812 14.71875 -3.875 C 15.613281 -5.113281 16.0625 -6.8203
    12 16.0625 -9 Z M 5.984375 -15.3125 C 6.597656 -16.382812 7.378906 -17.179688 8.328125 -17.703125 C 9.285156 -18.222656 10.425781 -18.484375 11.75 -18.484375 C 13.9375 -18.484375 15.710938 -17.613281 17.078125 -15.875 C 18.453125 -14.13
    2812 19.140625 -11.84375 19.140625 -9 C 19.140625 -6.164062 18.453125 -3.878906 17.078125 -2.140625 C 15.710938 -0.398438 13.9375 0.46875 11.75 0.46875 C 10.425781 0.46875 9.285156 0.207031 8.328125 -0.3125 C 7.378906 -0.832031 6.597656
    -1.628906 5.984375 -2.703125 L 5.984375 0 L 3 0 L 3 -25.078125 L 5.984375 -25.078125 Z M 5.984375 -15.3125 "/>
    </symbol>
    <symbol overflow="visible" id="glyph0-2">
    <path style="stroke:none;" d="M 16.09375 -17.359375 L 16.09375 -14.578125 C 15.257812 -15.046875 14.421875 -15.394531 13.578125 -15.625 C 12.734375 -15.851562 11.878906 -15.96875 11.015625 -15.96875 C 9.097656 -15.96875 7.609375 -15.359
    375 6.546875 -14.140625 C 5.484375 -12.921875 4.953125 -11.207031 4.953125 -9 C 4.953125 -6.800781 5.484375 -5.09375 6.546875 -3.875 C 7.609375 -2.65625 9.097656 -2.046875 11.015625 -2.046875 C 11.878906 -2.046875 12.734375 -2.160156 13
    .578125 -2.390625 C 14.421875 -2.617188 15.257812 -2.96875 16.09375 -3.4375 L 16.09375 -0.6875 C 15.269531 -0.300781 14.414062 -0.015625 13.53125 0.171875 C 12.644531 0.367188 11.703125 0.46875 10.703125 0.46875 C 7.984375 0.46875 5.820
    312 -0.382812 4.21875 -2.09375 C 2.625 -3.800781 1.828125 -6.101562 1.828125 -9 C 1.828125 -11.945312 2.632812 -14.265625 4.25 -15.953125 C 5.863281 -17.640625 8.078125 -18.484375 10.890625 -18.484375 C 11.804688 -18.484375 12.695312 -1
    8.390625 13.5625 -18.203125 C 14.4375 -18.015625 15.28125 -17.734375 16.09375 -17.359375 Z M 16.09375 -17.359375 "/>
    </symbol>
    </g>
    </defs>
    <g id="surface1">
    <g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
      <use xlink:href="#glyph0-0" x="100" y="130.94043"/>
      <use xlink:href="#glyph0-1" x="120.222656" y="130.94043"/>
      <use xlink:href="#glyph0-2" x="141.169922" y="130.94043"/>
    </g>
    </g>
    </svg>

    Yes, a browser displays it fine. But they also often display invalid html code fine. Your code does validate. And InkScape does open it fine. InkScape does have it in the root rather than on a layer, don't know if that is making a difference to Illustrator or not. Nothing else I have that opens SVG files deals with it as well as Illustrator.
    Here is the same file, text put back and resized down a bit. Run it through validation. You'll note Illustrator does not use the MathML 2.0 extensions. Perhaps that is the hang up.
    <?xml version="1.0" encoding="utf-8"?>
    <!-- Generator: Adobe Illustrator 15.1.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
    <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
    <svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
    width="612px" height="792px" viewBox="0 0 612 792" enable-background="new 0 0 612 792" xml:space="preserve">
    <symbol  id="glyph0-0" viewBox="-7.617 -9.477 15.234 18.953">
    <path id="path9_1_" fill="#010101" d="M1.711-0.07c-2.398,0-4.059,0.277-4.984,0.828c-0.918,0.555-1.375,1.484-1.375,2.797
    c0,1.055,0.344,1.891,1.031,2.516c0.695,0.617,1.641,0.922,2.828,0.922c1.645,0,2.961-0.582, 3.953-1.75
    c1-1.164,1.5-2.711,1.5-4.641V-0.07H1.711z M7.617-1.289V9.008H4.664V6.273c-0.68,1.094-1.523,1.902-2.531,2.422
    C1.121,9.215-0.113,9.477-1.57,9.477c-1.855,0-3.328-0.516-4.422-1.547C-7.078,6.891-7.617,5 .5-7.617,3.758
    c0-2.031,0.676-3.563,2.031-4.594c1.363-1.031,3.395-1.547,6.094-1.547h4.156V-2.68c0-1.363- 0.453-2.414-1.359-3.156
    c-0.898-0.75-2.152-1.125-3.766-1.125c-1.031,0-2.039,0.125-3.016,0.375c-0.98,0.242-1.922,0 .609-2.828,1.109v-2.734
    c1.094-0.426,2.148-0.742,3.172-0.953c1.02-0.207,2.008-0.313,2.969-0.313c2.613,0,4.563,0.6 8,5.844,2.031
    C6.969-6.09,7.617-4.039,7.617-1.289z"/>
    </symbol>
    <symbol  id="glyph0-1" viewBox="-8.07 -12.773 16.141 25.547">
    <path id="path12_1_" fill="#010101" d="M4.992,3.305c0-2.188-0.449-3.898-1.344-5.141C2.75-3.074,1.516-3.695-0.055-3.695
    c-1.563,0-2.793,0.621-3.688,1.859c-0.898,1.242-1.344,2.953-1.344,5.141c0,2.18,0.445,3.887 ,1.344,5.125
    c0.895,1.242,2.125,1.859,3.688,1.859c1.57,0,2.805-0.617,3.703-1.859C4.543,7.191,4.992,5.4 84,4.992,3.305z M-5.086-3.008
    c0.613-1.07,1.395-1.867,2.344-2.391C-1.785-5.918-0.645-6.18,0.68-6.18c2.188,0,3.961,0.871 ,5.328,2.609
    C7.383-1.828,8.07,0.461,8.07,3.305c0,2.836-0.688,5.121-2.063,6.859c-1.367,1.742-3.141,2.6 09-5.328,2.609
    c-1.324,0-2.465-0.262-3.422-0.781c-0.949-0.52-1.73-1.316-2.344-2.391v2.703H-8.07v-25.078h 2.984V-3.008z"/>
    </symbol>
    <symbol  id="glyph0-2" viewBox="-7.133 -9.477 14.266 18.953">
    <path id="path15_1_" fill="#010101" d="M7.133-8.352v2.781C6.297-6.039,5.461-6.387,4.617-6.617
    C3.773-6.844,2.918-6.961,2.055-6.961c-1.918,0-3.406,0.609-4.469,1.828s-1.594,2.934-1.594, 5.141c0,2.199,0.531,3.906,1.594,5.125
    s2.551,1.828,4.469,1.828c0.863,0,1.719-0.113,2.563-0.344c0.844-0.227,1.68-0.578,2.516-1.0 47v2.75
    C6.309,8.707,5.453,8.992,4.57,9.18C3.684,9.375,2.742,9.477,1.742,9.477c-2.719,0-4.883-0.8 52-6.484-2.563
    c-1.594-1.707-2.391-4.008-2.391-6.906c0-2.945,0.805-5.266,2.422-6.953c1.613-1.688,3.828-2 .531,6.641-2.531
    c0.914,0,1.805,0.094,2.672,0.281C5.477-9.008,6.32-8.727,7.133-8.352z"/>
    </symbol>
    <use xlink:href="#glyph0-0"  width="15.234" height="18.953" id="use20" x="-7.617" y="-9.477" transform="matrix(6.3499 0 0 6.3499 102.2407 253.0596)" overflow="visible"/>
    <use xlink:href="#glyph0-1"  width="16.141" height="25.547" id="use22" x="-8.07" y="-12.773" transform="matrix(6.2672 0 0 6.2672 218.9004 233.1802)" overflow="visible"/>
    <use xlink:href="#glyph0-2"  width="14.266" height="18.953" id="use24" x="-7.133" y="-9.477" transform="matrix(6.3016 0 0 -6.3016 326.4082 253.5166)" overflow="visible"/>
    </svg>
    Take care, Mike

  • User Interface Template not displaying correctly

    On some machines the user interface template is not displaying correctly (x is appearing instead of the images that make up the UI template). It does not seem to be a permissions related issue, as the same user can view the UI template on a different machine. It also doesn't seem to be a browser definitions issue as a different user on the same machine can view the UI template. Which leaves me at a loss for ideas...

    Where are your images being used in the UI template stored? I like to place my images in directory:
    <portalMidTier>/apache/apache/htdocs/img
    Then from within the UI template I can relatively reference the images as /img/logo.gif
    Regards,
    Candace

  • Website doesn't display correctly, some areas cut off

    All pages of my website cut off some text at the top and bottom. This does not happen with any other web pages I browse! The site was created by our developer and based on a Themeforest theme (from Envato) called Franklin Crowdfunding. Interestingly, my wife's computer does not have this problem and also uses Firefox. So I compared add-ons, extensions, etc. with hers and disabled those on my machine only. Also reinstalled latest Java, Firefox, started in Safe Mode, disabled acceleration and everything else I could find in the troubleshooting section. Nothing has worked. BTW site displays correctly on ipad as well.
    I did notice that the first time I navigated to the page after reinstalling Firefox it worked fine. But after closing and restarting Firefox the problem reappeared.
    Website is www.accoladesintl.com ...red copy at top is partially cut off (bottom half, not top half) and bottom half of the contact info at bottom.
    This problem does not happen in IE. I would rather use your product than it or google, so please help me find the problem!

    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
    Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
    You can't recover from this 'forget' unless you have a backup of the involved files.
    It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

  • Local Calculation (Summation) in query doesn't display correctly in web

    Hi All,
    I have been working on a complicated query where I have formulas that perform calculations.  I then Hide these formulas and use them in another formula for further calculations.  The new calculations I then use local summation to basically just add the columns values and come up with an overall result.  Works perfect and is displayed perfectly.
    Problem is now in the web.  Either using a Pie Chart or just simply an Analysis item, the values are not displayed correctly at all.  The Pie Chart only displays the first row of data (not the overall result...which is a local summation...which is what I would prefer) and suprised that the Analysis item doesn't basically display what the query does.  I'm guessing it has to do with this local calculation.
    Can someone explain this behavior?
    Thanks.

    Anyone any ideas?

  • Japanese language doesn't display correctly.

    Japanese symbols don't display correctly. On some websites, I only see a long row of squares instead of what's supposed to display. The websites display correctly on both Chrome and Internet Explorer.
    My system locale is in Japanese, and I'm using Windows Vista. The only program that has problems with displaying Japanese is Firefox 26. I used Firefox 2.0 before updating to this, and everything worked fine on FF2.0.
    EDIT: Ended up being a user error, seems like I had some font conflicts.

    Hello Temuthril,
    Report this problem in bugzilla.mozilla.org so that they may help you.
    thank you.

  • Data Link Properties wizard doesn't display correctly.

    Hi, This is Dai.
    I'm using Oracle DB.
    When I try to create configuration of Identity Center and to config DB connection, Data Link Properties wizard doesn't display required DB provider.
    The document of "SAP NetWeaver Identity Management Identity Center Getting Started" discribes that I should choose "Oracle Provider for OLE DB", however, I can't see it in the providers list.
    The list of DB provider is below.
    Microsoft Jet 4.0 OLE DB Provider
    Microsoft OLE DB Provider for Indexing Service
    Microsoft OLE DB Provider for ODBC Drivers
    Microsoft OLE DB Provider for Oracle
    Microsoft OLE DB Provider for SQL Server
    Microsoft OLE DB Simple Provider
    MSDataShape
    OLE DB Provider for Microsoft Directory Service
    And I want to select "Oracle Provider for OLE DB". Are there any settings or configs before this configuration? If you have some information, please help me.
    Best Regards,
    Daisuke Ikari

    Thank you,  I installed 32 bit client. And it's working now
    But now after IC initial configuration there is one more error which says-
    "this identity center database is not migrated to 7.2" And when i refresh the node it also says -
    "this version of identity center requires that database update 1035 is installed. the latest update installed is 1025"
    I have also attached the screenshot for the same below, I also ran update-mxmc.cmd to update DB.But still same error.
    please help,
    Indira

  • Basic Setup Page doesn't display correctly.

    I logged into my WRT54G router today to change some settings around but the page doesn't display any of the writing or links at the top of the page. I've tried reloading the page and resetting the router but neither of these worked.

    Also when I click the "save changes" button nothing happens. When I opened the page in IE it gave me the Error on Page thing and I clicked it to see the errors. I had 52 errors total with the reason Object Expected for each one.

Maybe you are looking for

  • Satellite L50D - Boot issues after Hard Drive replacement

    I have just upgraded my hard drive from the pathetic 5400 crod they supply to an SSHD@7200rpm but now have a major issue. I initially imaged the os from the old hard drive back to the new drive and have had chronic boot issues (1 in 3-4 boot attempts

  • CFIMAGE not working with certain JPG

    Hi all, Got an emergency here, hope anyone can help. I find that more and more people are encountering problems using CFIMAGE -- no error is thrown when reading/saving certain jpg images, but the result image is just blank and gray. The code is just

  • Form design

    I have a form that was designed in Adobe InDesign, converted to PDF, and form fields were added in Acrobat (not LiveCycle). On FormsCentral I only see Blank Form (in which case I'd need to totally re-create my form and that's a lot of work), or templ

  • Moving pictures around my library

    How can I move my pictures around in my library to make easy to put into albums

  • Kde printing and cups-pdf

    This was working before, but I don't know what changed, nor where to look to find anything. What's happening is that anything printing through KDE's print system (ie Konqueror, Kate, KMail) produces defunct .pdf files when I print to my cups-pdf prin