Stack traces and Errors - Portal
Hello,
I would like to know what information does the stack trace contain? Is this information, sensitive, can it lead to security threat?
Errors presented on the portal screen, e.g. 500 Internal Server Error can that lead to security threat?
If yes, What kind of error message can be presented and how can that be configured in portal?
Thank you in advance.
Best regards,
Dharmi
Hi,
it's not a problem to change default error pages (see this [wiki|http://wiki.sdn.sap.com/wiki/display/EP/CustomizingErrorMessagesinPortal]). So you can minimize the risk of leaking sensitive information pretty easily. The users will get less scared of error messages as well
Cheers
Similar Messages
-
Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S EDear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E -
WLST, how do I suppress unwanted stack traces and make WLST less verbose?
Hi everyone,
I've just started out with WLST but have ended up somewhat confused. My script works as intended but is very verbose.
Suppose I want to log in:
try:
connect(user, "wrong_password", url)
except WLSTException, err:
print str(err)
print "Run with option \"-h\" for help"The password is wrong so I get something like this printed out by me:
{noformat}
Error occured while performing connect : User: wm714, failed to be authenticated. Use dumpStack() to view the full stacktrace
{noformat}
But I also get a totally unwanted Java stack trace (before my message):
{noformat}This Exception occurred at Fri May 21 15:49:01 CEST 2010.
javax.naming.AuthenticationException [Root exception is java.lang.SecurityException: User: wm714, failed to be authenticated.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:42)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:677)
{noformat}
I don't want to confuse the user with all that! I found this:
http://objectmix.com/weblogic/529822-wlst-exception-handling-unwanted-stack-trace.html
Which discusses WLS.commandExceptionHandler.setSilent(1) I'm running on WLS 10.3.0.0 and can execute that statement but it has no effect. I didn't even know about the WLS-object and I can find no documentation on commandExceptionHandler.
On the matter of verbosity, is there any way to get rid of stuff like:
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
For more help, use help(domainRuntime)I avoid using the "interactive" commands like cd and use stuff like getMBean("domainRuntime:/ServerRuntimes/" + appServer.getName()
+ "/JMSRuntime/" + appServer.getName() + ".jms/JMSServers") but I still get the clutter printed out.
Thanks!Workaround:
wlstOut = tempfile.mktemp(suffix="_wlst.txt")
redirect(wlstOut, "false")
... do useful stuff
stopRedirect()
os.remove(wlstOut)I would have preffered to turn off the messages (yes I could try /dev/null) but this will do. A funny thing is that the stack trace I wrote about doesn't appear in the log file. Somehow "redirect" must have a nice side effect.
/Roger -
Double stack BI and Enterprise portal for SSO
I am in the process of configuring a double stack BI and SAP Enterprise Portal. Both systems are residing on different domains. We want to utilize the standalone SAP Enterprise Portal for our BEx etc. For that I have exchanged certificates between the ABAP and the SAP Enterprise Portal systems and with the help of Support desk tool I have overcome the certificate issues. The RFC connection from ABAP and SAP Enterprise Portal works fine. The Support desk tool is complaining now about the prefix of these two servers. Also when I check the connection testing between these two systems all the messages are correct except for WEBAS connection it complains about the ping service which is already active on ABAP side. For Connectors it complains about SSO which is not detected/complained by the Support desk tool (0.426). I need your advice:
1. Either uninstall the JAVA instance of BI or
2. Make a Federated Portal network by making the BI JAVA as PRODUCER and the SAP standalone as CONSUMER.
The Support package levels are the same as EHP1 SP 7 of both the double stack BI and the standalone Enterprise Portal systems. The source of users are both local to the systems.answered
-
Turning off server side stack trace in error message for weblogic81
Hi,
I am seeing server side stack trace in getMessage() method which is being stuffed
by application server. I am using weblogic 81. Could you please let me know how
to turn off that in getMessage() to return my only original message?
Thanks
PraveenDid you solve this problem? I am facing this problem and don't seem to solve with
"Instrument Stack Traces" flag
"Franck" <[email protected]> wrote:
>
Hi there,
In order to manage my own exceptions in some EJB, i have developped some
classes
extending Exception.
Now i would like to display proper messages to the final user, based
on the messages
defined in my exception classes.
Using standard try/catch, i can easily get reference to the exception
that can
occur during EJB execution.
The problem is that my message (myException.getMessage) is followed by
the extra
long message generated by the Server and starting with "Start server
side stack
trace:".
For exemple :
com.xx.ejb.DamageHistoryException: Can't find the price for this object
(objId=7569,
sizeCode=LI, colorCode=2)
Start server side stack trace:
com.xx.ejb.DamageHistoryException: Can't find the price for this object
(objId=7569,
sizeCode=LI, colorCode=2)
at com.xx.ObjectAccess.getObjectPrice(Unknown Source)
at com.xx.ejb.ObjectBusinessService.getObjectPrice(Unknown Source)
<....>
about 20 lines here !!
<....>
Any idea about how to avoid the extra message ??
Thanx in advance
Franck -
General Stack Trace and Exception Question
I hope this is the correct forum to post to ... well here goes...
The Big Picture:
I�m using the org.xml.sax package (along with their subsequent �helper� and �ext� packages) to parse huge XML files.
Some references:
DefaultHandler -> org.xml.sax.DefaultHandler (Default base class for SAX2 event handlers)
CustomHandler -> mypackage.CustomHandler (which extends the above DefaultHandler)
SAXException -> org.xml.sax.SAXException (thrown by many methods defined in the DefaultHandler)
The story:
I�ve made a class which extends the DefaultHandler class; (CustomHandler). The DefaultHandler class has a bunch of methods declared in it that I overwrite, which all claim to throw these SAXExceptions. My overwritten methods defined in CustomHandler had also been written to throw those SAXExceptions.
My Overwritten Methods: (you�ll see why the �throw� part is commented a little later)
//Methods in SAX DocumentHandler
public void startDocument(){//throws SAXException{
public void endDocument(){//throws SAXException{
public void startElement(String uri, String localName, String qName, Attributes attrs){//throws SAXException{
public void endElement(String uri, String localName, String qName){//throws SAXException{
public void characters(char buf[], int offset, int len){//throws SAXException{
The Code Executes like This:
try{
File xmlFile = new File(getFileName());
CustomHandler myHandler = new CustomHandler();
saxParser.parse(xmlFile, myHandler); //<- Important Line
myHandler.reportSomeXmlInfoAboutTheFile(); //<- Ignore this command
}catch(ParserConfigurationException pce){
pce.printStackTrace();
}catch(SAXException sax){
sax.printStackTrace();
}catch(IOException ioe){
ioe.printStackTrace();
}Sample Stack Trace: (The ArrayIndexOutOfBoundsException was set up to be thrown for the sake of discussion)
java.lang.ArrayIndexOutOfBoundsException: 5
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:691)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:281)
at saxparserexercise.DriverClass.exercise(DriverClass.java:58) //<- Last (un Native to ME � not java) execution stack point
at saxparserexercise.Main.<init>(Main.java:38)
at saxparserexercise.Main.main(Main.java:59)
The Problem:
Its about my stack traces� they all map through the above noted �Important Line� instead of through my overwritten methods in CustomHandler (where I cause the ArrayIndexOutOfBoundsException) So, therefore I thought I�d try commenting out those �throws SAXException� parts in the method declarations of my CustomHandler class� Diddn�t change a thing. Thus my question is�
The Question:
What changes or modifications can I make such that the Stack Trace I receive will map to exactly where the problem occurs in my code� does that make sense?I suspect it may be because your version of Catalina was compiled without debugger support. From what I remember this strips line numbers from generated class files.
You'll need to download either a debug-enabled version of Catalina, or pull down the source and rebuild the system.
Unless I'm barking up the wrong tree.
J -
Trace and error file at the same time ?
hello,
i start my reports through java-runtime.
i want to produce TraceFile and ErrFile at the
same time. But whenever i start the Trace i don't seem
to get an error file ?
is this a choice between ErrFile OR TraceFile or
is there any trick i didn't figure out ?
Greetings
Thorsten LorenzGet with your developer and see what the code is really doing as well as how it is being used. All of the deadlocks I have encountered to date had their root cause in the application code. Spending some time with the developers to see what they are doing and more importantly why, will lead you to finding a solution to your deadlock problem.
-
Exception Handling and Stack Traces in JDK 1.1.8
Hi,
I'm presently maintain and upgrading a Web-Objects 4.5 application that uses the JDK 1.18. There are two constantly recurring exceptions that keep getting thrown, exceptions for which there are no stack traces. These are exceptions thrown by methods that do not presently have throws or try/catch code associated with them.
My questions are:
1) Why are there no stack traces available? Is it because the exception handling code is not there, or could there be another reason?
2) Will the inclusion of exception-handling code ALWAYS lead to stack traces and messages becoming available (if I put a e.printStackTrace() in my catch(Excetion e) clause), or will there be situations where it will not be available?
3) What is the best way for me to handle these types of exceptions in order to gain the most information possible about their root causes and possible solutions?
Thanks for your help.I have never seen a case where there was no stack trace.
I have seen cases where the stack trace does not provide line numbers. I have also seen cases where it is less than useful as it terminates on a native call (which is to be expected.)
However, if you don't call printStackTrace() then you don't get it. And if you catch an exception an throw a different one you also loose information. So you might want to check those possibilities. -
Make java run without printing the stack trace
I have a GUI program which appears to work for all test cases. Basically what it does is prints out data from a linked list allowing the user to traverse the list with Next and Previous buttons which call a list iterator next/previous method call, and then display the current item in the list. The original problem arose when dealing with alternating calls to next and previous, which since list iterator does not have a current pointer, returned the same element ad infinitum. I modified the method to check for alternating button presses, and it seems to work, except for cases where there are two elements in the list. In this case it still works, printing the correct element, but it also prints to the command line an Exception in Thread AWT...NoSuchElementException. My question is, is there any way to tell the program to not print out this stack trace and just keep running quietly through the Exception?
I'm not an expert at error handling, but wouldn't it work to put the code that throws the exception in a try/catch block?
like
try {
//code that causes exception
} catch (NoSuchElementException e) {
//do nothing
}Might not work, but it's worth a try... -
How to get Java source in applet stack trace to debug Java security manager
How can I get line numbers for Java source in stack traces for my applet? I'm having a problem with my code-signing certificate. On one of my applets, I consistently get a NullPointerException inside the security dialog code in the JDK. As a result, either the "trust this applet" dialog never appears, or even though it appears, it defaults to untrusted because of the exception, so I can't access any local files (and that's a bit of a problem for an applet whose sole purpose is to upload files to our server). I unzipped src.zip in my JDK directory and set the debug flag for my Ant <javac> task as well as set debuglevel to "lines." Anything else? Here's the trace that I'm getting so far. See that after the NullPointerException it assumes that the user has denied permission. If I could read this Java source maybe I could figure out why it hates my code-signing certificate (jarsigner, BTW, never complains when I verify my jar).
security: Blacklist file not found or revocation check is disabled
security: Accessing keys and certificate in Mozilla user profile: null
security: Loading Root CA certificates from D:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded Root CA certificates from D:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading Deployment certificates from C:\Users\Rich\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
security: Loaded Deployment certificates from C:\Users\Rich\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA has been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: Start checking trusted extension for this certificate
security: Start comparing to jurisdiction list with this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
security: Checking if certificate is in Deployment session certificate store
java.lang.NullPointerException
at com.sun.deploy.ui.UIFactory.showSecurityDialog(Unknown Source)
at com.sun.deploy.security.TrustDeciderDialog.showDialog(Unknown Source)
at com.sun.deploy.security.X509Util.showSecurityDialog(Unknown Source)
at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.isTrustedByTrustDecider(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.getTrustedCodeSources(Unknown Source)
at com.sun.deploy.security.CPCallbackHandler$ParentCallback.strategy(Unknown Source)
at com.sun.deploy.security.CPCallbackHandler$ParentCallback.openClassPathElement(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.getJarFile(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.access$700(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.ensureOpen(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.<init>(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
security: User has denied the priviledges to the code
security: Adding certificate in Deployment denied certificate store
security: Added certificate in Deployment denied certificate store
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA has been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: Start checking trusted extension for this certificate
security: Start comparing to jurisdiction list with this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment denied certificate storeRats, now that I look at the stack trace and compare to what's in the JDK srce.zip, it appears that most of this code is not part of the JDK source. I don't see any com/sun/deploy, etc.
-
Empty Weblogic Server 8.1 SP1 Repeating Stack Trace
Thanks in advance for any help and attention!
An instance of Weblogic 8.1 SP1 on our UAT environment keeps on spitting out stack traces even though the only user accessing WL is via the admin console. There are no applications deployed on this platform.
The stack trace is also intermittent and can't be attributed to a specific action. This is occuring on our UAT environment and on a WL install which is a copy of our production environment. But we don't get these stack traces on production??
Here are some details of the server hosting WL 8.1 SP1 in our UAT environment.
Operating System/Hardware:
Solaris VM (build Solaris_JDK_1.2.2_10, native threads, sunwjit)
Operating System SunOS abcu012-ukzr 5.8 Generic_108528-23
sun4u sparc SUNW,Sun-Fire-V210
JVM Used by WebLogic:
Weblogic JVM Java(TM) 2 Runtime Environment,
Standard Edition (build 1.4.2-b28)
Java HotSpot(TM) Client VM (build 1.4.2-b28, mixed mode)
I have listed the full stack trace and config.xml below...
<?xml version="1.0" encoding="UTF-8"?>
<Domain ConfigurationVersion="8.1.0.0" Name="abc">
<Server AcceptBacklog="100"
CustomIdentityKeyStoreFileName="/apps/bea/user_projects/domains/abc/certificates/pwls.jks"
CustomIdentityKeyStorePassPhrase="XXXXX"
CustomIdentityKeyStoreType="JKS"
CustomTrustKeyStoreFileName="/apps/bea/user_projects/domains/abc/certificates/cacert.jks"
CustomTrustKeyStorePassPhrase="XXXXX"
CustomTrustKeyStoreType="JKS" GracefulShutdownTimeout="5"
IgnoreSessionsDuringShutdown="true"
KeyStores="CustomIdentityAndCustomTrust" ListenAddress=""
ListenPort="7001" Name="abcu012-ukzr" NativeIOEnabled="true"
ReliableDeliveryPolicy="RMDefaultPolicy" ServerVersion="8.1.1.0"
StdoutEnabled="false" TunnelingEnabled="true" WeblogicPluginEnabled="true">
<SSL Enabled="true" HostnameVerificationIgnored="false"
IdentityAndTrustLocations="KeyStores" ListenPort="7002"
Name="abcu012-ukzr" ServerPrivateKeyAlias="wls" ServerPrivateKeyPassPhrase="XXXXX"/>
<Log FileName="/apps/bea/logs/abcu012-ukzr/abc/server.log"
Name="abcu012-ukzr" RotationType="byTime"/>
<WebServer KeepAliveSecs="120"
LogFileName="/apps/bea/logs/abcu012-ukzr/abc/access.log" Name="abcu012-ukzr"/>
<ExecuteQueue Name="weblogic.kernel.Default" ThreadCount="30"/>
</Server>
<JMSFileStore Directory="rmfilestore" Name="FileStore"/>
<WSReliableDeliveryPolicy DefaultRetryCount="10"
DefaultTimeToLive="60000" Name="RMDefaultPolicy" Store="FileStore"/>
<Security Name="abc" PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm" RealmSetup="true">
<weblogic.security.providers.authentication.DefaultAuthenticator
Name="Security:Name=myrealmDefaultAuthenticator" Realm="Security:Name=myrealm"/>
<weblogic.security.providers.authentication.DefaultIdentityAsserter
ActiveTypes="AuthenticatedUser"
Name="Security:Name=myrealmDefaultIdentityAsserter" Realm="Security:Name=myrealm"/>
<weblogic.security.providers.authorization.DefaultRoleMapper
Name="Security:Name=myrealmDefaultRoleMapper" Realm="Security:Name=myrealm"/>
<weblogic.security.providers.authorization.DefaultAuthorizer
Name="Security:Name=myrealmDefaultAuthorizer" Realm="Security:Name=myrealm"/>
<weblogic.security.providers.authorization.DefaultAdjudicator
Name="Security:Name=myrealmDefaultAdjudicator" Realm="Security:Name=myrealm"/>
<weblogic.security.providers.credentials.DefaultCredentialMapper
Name="Security:Name=myrealmDefaultCredentialMapper" Realm="Security:Name=myrealm"/>
<weblogic.management.security.authentication.UserLockoutManager
Name="Security:Name=myrealmUserLockoutManager" Realm="Security:Name=myrealm"/>
<weblogic.management.security.Realm
Adjudicator="Security:Name=myrealmDefaultAdjudicator"
AuthenticationProviders="Security:Name=myrealmDefaultAuthenticator|Security:Name=myrealmDefaultIdentityAsserter"
Authorizers="Security:Name=myrealmDefaultAuthorizer"
CredentialMappers="Security:Name=myrealmDefaultCredentialMapper"
DefaultRealm="true" DisplayName="myrealm"
FullyDelegateAuthorization="true"
Name="Security:Name=myrealm"
RoleMappers="Security:Name=myrealmDefaultRoleMapper"
UserLockoutManager="Security:Name=myrealmUserLockoutManager"/>
</Security>
<EmbeddedLDAP Credential="{3DES}XPMACNvHFn4=" Name="abc"/>
<SecurityConfiguration
Credential="XXXXX"
Name="abc" RealmBootStrapVersion="1"/>
<Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/>
<FileRealm Name="wl_default_file_realm"/>
<PasswordPolicy Name="wl_default_password_policy"/>
<JMSServer Name="WSStoreForwardInternalJMSServerabcu012-ukzr"
Store="FileStore" Targets="abcu012-ukzr">
<JMSQueue CreationTime="1073401554039"
JNDIName="jms.internal.queue.WSStoreForwardQueue"
JNDINameReplicated="false" Name="WSInternaljms.internal.queue.WSStoreForwardQueueabcu012-ukzr"/>
<JMSQueue CreationTime="1073401554605"
JNDIName="jms.internal.queue.WSDupsEliminationHistoryQueue"
JNDINameReplicated="false" Name="WSInternaljms.internal.queue.WSDupsEliminationHistoryQueueabcu012-ukzr"/>
</JMSServer>
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" MaxCapacity="25" Name="RolhPool"
Password="{3DES}bz9CieW2/7g=" Properties="user=rolhdb"
Targets="abcu012-ukzr" TestConnectionsOnCreate="false"
TestConnectionsOnRelease="false"
TestConnectionsOnReserve="false"
TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@XXXXX"/>
<JDBCTxDataSource JNDIName="jdbc/rolh/ds" Name="RolhDS"
PoolName="RolhPool" Targets="abcu012-ukzr"/>
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" MaxCapacity="25" Name="qualificationsPool"
Password="{3DES}wIVVxk0Zjk8=" Properties="user=qualdb"
Targets="abcu012-ukzr" TestConnectionsOnCreate="false"
TestConnectionsOnRelease="false"
TestConnectionsOnReserve="false"
TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@XXXXX"/>
<JDBCTxDataSource JNDIName="jdbc/qual/ds" Name="QualDS"
PoolName="qualificationsPool" Targets="abcu012-ukzr"/>
<JMSConnectionFactory JNDIName="abc.jms.connectionFactory"
MessagesMaximum="-1" Name="abcJMSConnectionFactory" Targets="abcu012-ukzr"/>
<JMSFileStore
Directory="/apps/bea/user_projects/domains/abc/abcJMSFileStore" Name="abcJMSFileStore"/>
<JMSServer Name="abcJMSServer" Targets="abcu012-ukzr">
<JMSQueue CreationTime="1073406122951"
JNDIName="abc.jms.queue.qualifications"
JNDINameReplicated="false" Name="Qualifications"/>
<JMSQueue CreationTime="1075485561981"
JNDIName="abc.jms.queue.printService"
JNDINameReplicated="false" Name="PrintQueue"/>
<JMSQueue CreationTime="1075994883296"
JNDIName="abc.jms.queue.applicationRejection"
JNDINameReplicated="false" Name="ApplicationRejection"/>
<JMSQueue CreationTime="1075994920032"
JNDIName="abc.jms.queue.correspondence"
JNDINameReplicated="false" Name="Correspondence"/>
<JMSQueue CreationTime="1075994977728"
JNDIName="abc.jms.queue.crbResponse"
JNDINameReplicated="false" Name="CRBResponse"/>
<JMSQueue CreationTime="1075995041107"
JNDIName="abc.jms.queue.licenceReturn"
JNDINameReplicated="false" Name="LicenceReturn"/>
<JMSQueue CreationTime="1075995091920"
JNDIName="abc.jms.queue.paymentApplications"
JNDINameReplicated="false" Name="PaymentApplications"/>
<JMSQueue CreationTime="1075995123366"
JNDIName="abc.jms.queue.CardSecured"
JNDINameReplicated="false" Name="CardSecured"/>
<JMSQueue CreationTime="1075995158136"
JNDIName="abc.jms.queue.CardsProduced"
JNDINameReplicated="false" Name="CardsProduced"/>
<JMSQueue CreationTime="1075995199128"
JNDIName="abc.jms.queue.CardsDestroyed"
JNDINameReplicated="false" Name="CardsDestroyed"/>
<JMSQueue CreationTime="1112361191613"
JNDIName="abc.jms.queue.basAccepted"
JNDINameReplicated="false" Name="BASAccepted"/>
<JMSQueue CreationTime="1121364464738"
JNDIName="abc.jms.queue.faultLogging" Name="FaultLogging"/>
</JMSServer>
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" MaxCapacity="25" Name="PrintPool"
Password="XXXXX" Properties="user=intdb"
Targets="abcu012-ukzr" TestConnectionsOnCreate="false"
TestConnectionsOnRelease="false"
TestConnectionsOnReserve="false"
TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@XXXXX"/>
<JDBCTxDataSource JNDIName="jdbc/print/ds" Name="PrintDS"
PoolName="PrintPool" Targets="abcu012-ukzr"/>
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" MaxCapacity="25" Name="intPool"
Password="XXXXX" Properties="user=intdb"
Targets="abcu012-ukzr" TestConnectionsOnCreate="false"
TestConnectionsOnRelease="false"
TestConnectionsOnReserve="false"
TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@XXXXXe"/>
<Log FileName="/apps/bea/logs/abcu012-ukzr/abc/domain.log" Name="abc"/>
<JDBCTxDataSource JNDIName="jdbc/dhc/ds" Name="dhcDS"
PoolName="intPool" Targets="abcu012-ukzr"/>
<JDBCTxDataSource JNDIName="jdbc/fault/ds" Name="FaultDS"
PoolName="intPool" Targets="abcu012-ukzr"/>
<JDBCTxDataSource JNDIName="jdbc/int/ds" Name="IntDS"
PoolName="intPool" Targets="abcu012-ukzr"/>
</Domain>
CLASSPATH=::/apps/java/j2sdk_nb/j2sdk1.4.2/jre/lib/rt.jar:/server/lib/webservices.jar:/apps/dm/dmapp/dfc/dfc/conf/config:/app
s/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-pki-api.jar:/apps/bea/user_projects/domains/XXXXX
/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-openpgp-provider.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/X
XXXX/XXXXX/cryptix-message-api.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-jce-provid
er.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-jce-api.jar:/apps/bea/user_projects/do
mains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/X
XXXX/certpath-api-compat.jar
PATH=/apps/dm/dmapp/product/5.2/bin:/apps/dm/dmapp/dba:/apps/oracle/product/9.2/bin:/export/home/kicha/XXXXXTools:/usr/bin:/u
sr/ucb:/etc:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
LD_LIBRARY_PATH=/apps/java/j2sdk_nb/j2sdk1.4.2/lib:/apps/dm/dmapp/product/5.2/bin:/apps/dm/dmapp/fulltext/verity271/_ssol26/b
in::oracle:/usr/lib:/apps/bea/weblogic81/server/lib/solaris:/apps/bea/weblogic81/server/lib/solaris/oci920_8
* Warning: This script is DEPRECATED. Please *
* don't start new Domains with this script. Use *
* scripts generated by Domain Configuration *
* Wizard instead. *
CLASSPATH=/apps/bea/jdk141_03/lib/tools.jar:/apps/bea/weblogic81/server:/apps/bea/weblogic81/server/lib/weblogic_sp.jar:/apps
/bea/weblogic81/server/lib/weblogic.jar:::/apps/java/j2sdk_nb/j2sdk1.4.2/jre/lib/rt.jar:/server/lib/webservices.jar:/apps/dm/
dmapp/dfc/dfc/conf/config:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-pki-api.jar:/apps/b
ea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-openpgp-provider.jar:/apps/bea/user_projects/domains
/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-message-api.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/
XXXXX/XXXXX/cryptix-jce-provider.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-jce-api.
jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix.jar:/apps/bea/user_projects/domains/XXXXX
/XXXXXu014-ukcr/upload/XXXXX/XXXXX/certpath-api-compat.jar
PATH=.:/apps/bea/weblogic81/server/bin:/apps/bea/jdk141_03/jre/bin:/apps/bea/jdk141_03/bin:/apps/bea/weblogic81/server/lib/so
laris:/apps/dm/dmapp/product/5.2/bin:/apps/dm/dmapp/dba:/apps/oracle/product/9.2/bin:/export/home/kicha/XXXXXTools:/usr/bin:/
usr/ucb:/etc:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://<hostname>:<port>/console *
+ /apps/bea/jdk141_03/bin/java -server -Xms1280m -Xmx1280m -XX:NewSize=384m -XX:MaxNewSize=384m -XX:SurvivorRatio=15
-Djava.library.path=/apps/bea/weblogic81/server/lib/solaris:/apps/dm/dmapp/dfc/dfc
-DXXXXX.war=/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/XXXXX.war -classpath
/apps/bea/jdk141_03/lib/tools.jar:/apps/bea/weblogic81/server:/apps/bea/weblogic81/server/lib/weblogic_sp.jar:/apps/bea/weblo
gic81/server/lib/weblogic.jar:::/apps/java/j2sdk_nb/j2sdk1.4.2/jre/lib/rt.jar:/server/lib/webservices.jar:/apps/dm/dmapp/dfc/
dfc/conf/config:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-pki-api.jar:/apps/bea/user_pr
ojects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-openpgp-provider.jar:/apps/bea/user_projects/domains/XXXXX/XXX
XXu014-ukcr/upload/sia/XXXXX/cryptix-message-api.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/
cryptix-jce-provider.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix-jce-api.jar:/apps/be
a/user_projects/domains/XXXXX/XXXXXu014-ukcr/upload/XXXXX/XXXXX/cryptix.jar:/apps/bea/user_projects/domains/XXXXX/XXXXXu014-u
kcr/upload/XXXXX/XXXXX/certpath-api-compat.jar -Dweblogic.Name=XXXXXu012-ukzr -Dweblogic.management.username=kicha
-Dweblogic.management.password=kicha_111 -Dweblogic.ProductionModeEnabled=
-Djava.security.policy=/apps/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
<Jan 23, 2006 3:39:13 PM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM
Version 1.4.1_03-b02 from Sun Microsystems Inc.>
<Jan 23, 2006 3:39:14 PM GMT> <Info> <Configuration Management> <BEA-150016> <This server is being started as the
administration server.>
<Jan 23, 2006 3:39:14 PM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP1 Fri Jun 20 23:06:40 PDT
2003 271009
WebLogic XMLX Module 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009>
<Jan 23, 2006 3:39:15 PM GMT> <Notice> <Management> <BEA-140005> <Loading domain configuration from configuration repository
at /apps/bea/user_projects/domains/XXXXX/./config.xml.>
Full thread dump Java HotSpot(TM) Server VM (1.4.1_03-b02 mixed mode):
"ExecuteThread: '6' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0x3111e8 nid=0x4b in Object.wait()
[9ba81000..9ba81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e8a28> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e8a28> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '5' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0xf87420 nid=0x4a in Object.wait()
[9bb81000..9bb81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e8250> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e8250> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '4' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0x1141418 nid=0x49 in Object.wait()
[9bc81000..9bc81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e7a48> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e7a48> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0xe5b600 nid=0x48 in Object.wait()
[9bd81000..9bd81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e7270> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e7270> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0xaa9998 nid=0x47 in Object.wait()
[9be81000..9be81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e6a98> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e6a98> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0x7c65f8 nid=0x46 in Object.wait()
[9bf81000..9bf81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e62c0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e62c0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=5 tid=0x3fccf8 nid=0x45 in Object.wait()
[9ca81000..9ca81994]
at java.lang.Object.wait(Native Method)
- waiting on <aa5e5ac8> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <aa5e5ac8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0xf7efd8 nid=0x44 waiting for monitor entry
[9c081000..9c081994]
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:93)
- waiting to lock <bede1b00> (a java.lang.String)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0x12737d0 nid=0x43 waiting for monitor entry
[9c181000..9c181994]
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:93)
- waiting to lock <bede1b00> (a java.lang.String)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0xb70fd0 nid=0x42 in Object.wait()
[9c281000..9c281994]
at java.lang.Object.wait(Native Method)
- waiting on <bede6ab8> (a [Lweblogic.socket.PosixSocketInfo$FdStruct;)
at java.lang.Object.wait(Object.java:426)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- locked <bede6ab8> (a [Lweblogic.socket.PosixSocketInfo$FdStruct;)
- locked <bede1b00> (a java.lang.String)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"SSLListenThread.Default" prio=5 tid=0x7475a8 nid=0x41 runnable [9c381000..9c381994]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
- locked <bedffc38> (a java.net.PlainSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:448)
at javax.net.ssl.impl.SSLServerSocketImpl.accept(Unknown Source)
at weblogic.t3.srvr.ListenThread.accept(ListenThread.java:715)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:291)
"ListenThread.Default" prio=5 tid=0x588628 nid=0x40 runnable [9c481000..9c481994]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
- locked <bedeeb68> (a java.net.PlainSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:448)
at java.net.ServerSocket.accept(ServerSocket.java:419)
at weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:24)
at weblogic.t3.srvr.ListenThread.accept(ListenThread.java:715)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:291)
"Thread-9" daemon prio=5 tid=0xac6f28 nid=0x3f in Object.wait() [9c581000..9c581994]
at java.lang.Object.wait(Native Method)
- waiting on <bec9b7d0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <bec9b7d0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=5 tid=0x8967e0 nid=0x3e in Object.wait() [9c681000..9c681994]
at java.lang.Object.wait(Native Method)
- waiting on <bec26738> (a weblogic.jms.backend.BETimerTree)
at weblogic.jms.backend.BETimerTree.execute(BETimerTree.java:146)
- locked <bec26738> (a weblogic.jms.backend.BETimerTree)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"Thread-8" prio=5 tid=0x5b0260 nid=0x3d in Object.wait() [9c781000..9c781994]
at java.lang.Object.wait(Native Method)
- waiting on <bec01568> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <bec01568> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"Thread-7" prio=5 tid=0x874ef8 nid=0x3c in Object.wait() [9c881000..9c881994]
at java.lang.Object.wait(Native Method)
- waiting on <bebe7048> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <bebe7048> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"Thread-6" prio=5 tid=0xdec010 nid=0x3b in Object.wait() [9c981000..9c981994]
at java.lang.Object.wait(Native Method)
- waiting on <bebbdb08> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <bebbdb08> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"weblogic.health.CoreHealthMonitor" daemon prio=5 tid=0x5eebd8 nid=0x39 waiting on condition [9dd81000..9dd81994]
at java.lang.Thread.sleep(Native Method)
at weblogic.t3.srvr.CoreHealthMonitorThread.run(CoreHealthMonitorThread.java:124)
"Thread-4" prio=5 tid=0x665808 nid=0x38 in Object.wait() [9de81000..9de81994]
at java.lang.Object.wait(Native Method)
- waiting on <be635fa0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <be635fa0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"VDE Transaction Processor Thread" prio=2 tid=0xcc5480 nid=0x36 in Object.wait() [9df81000..9df81994]
at java.lang.Object.wait(Native Method)
- waiting on <be5537b8> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at java.lang.Object.wait(Object.java:426)
at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:355)
- locked <be5537b8> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:215)
"ExecuteThread: '2' for queue: 'weblogic.admin.RMI'" daemon prio=5 tid=0x2f6f68 nid=0x35 in Object.wait()
[9e081000..9e081994]
at java.lang.Object.wait(Native Method)
- waiting on <be4c3e50> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4c3e50> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.admin.RMI'" daemon prio=5 tid=0x64eb90 nid=0x34 in Object.wait()
[9e181000..9e181994]
at java.lang.Object.wait(Native Method)
- waiting on <be4c3998> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4c3998> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.admin.RMI'" daemon prio=5 tid=0x365e50 nid=0x33 in Object.wait()
[9e281000..9e281994]
at java.lang.Object.wait(Native Method)
- waiting on <be4c34c0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4c34c0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.admin.HTTP'" daemon prio=5 tid=0xcc3d88 nid=0x32 in Object.wait()
[9e381000..9e381994]
at java.lang.Object.wait(Native Method)
- waiting on <be4c2a40> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4c2a40> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.admin.HTTP'" daemon prio=5 tid=0x9e9708 nid=0x31 in Object.wait()
[9e481000..9e481994]
at java.lang.Object.wait(Native Method)
- waiting on <be4c2560> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4c2560> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"weblogic.security.SpinnerRandomSource" daemon prio=5 tid=0xcc3fb8 nid=0x30 in Object.wait() [9e581000..9e581994]
at java.lang.Object.wait(Native Method)
- waiting on <be4b4410> (a java.lang.Object)
at java.lang.Object.wait(Object.java:426)
at weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.java:60)
- locked <be4b4410> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:536)
"weblogic.time.TimeEventGenerator" daemon prio=9 tid=0x9d9550 nid=0x2f in Object.wait() [9e681000..9e681994]
at java.lang.Object.wait(Native Method)
- waiting on <be4b31a8> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:271)
- locked <be4b31a8> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:118)
at java.lang.Thread.run(Thread.java:536)
"ExecuteThread: '4' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x2d94e0 nid=0x2e in Object.wait()
[9e781000..9e781994]
at java.lang.Object.wait(Native Method)
- waiting on <be4b2930> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4b2930> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '3' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x2d8960 nid=0x2d in Object.wait()
[9e881000..9e881994]
at java.lang.Object.wait(Native Method)
- waiting on <be4b2470> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <be4b2470> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x52bd58 nid=0x2c in Object.wait()
[9e981000..9e981994]
at java.lang.Object.wait(Native Method)
What about Red Hat 7.2 ?
I do not understand very well if this version has anything to do with the
ones mentioned on supported platforms
thanks
"Raj Alagumalai" <[email protected]> escribió en el mensaje
news:[email protected]..
Campot,
Unfortunately WLS 8.1 sp1 is not supported on RedHat 7.1
http://e-docs.bea.com/wls/certifications/certs_810/overview.html#1043408
should provide you more information on this.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Campot" <[email protected]> wrote in message
news:[email protected]..
Can I install WebLogic Server 8.1 SP1 on Linux Redhat 7.1?
I looked the documentation and it is not clear if the server runs on
this
Linux version
Thanks -
Whenever an exception object is created, its constructor is called. This constructor, calls super class constructor to fill in the exception stack trace and then the constructor uses printStackTrace() method to print the stack trace.
This should print the stack trace automatically on the std out.
However, in our exception handling code, unless we specifically use printStackTrace() it does not print stack trace.
What is the reason for this?Hi,
I am aware that not all Exceptions print stack trace to std out.
I am specifically refering to SQLException. The constructor source code is
public SQLException(String reason) {
super(reason);
this.SQLState = null;
this.vendorCode = 0;
if (!(this instanceof SQLWarning)) {
if (DriverManager.getLogWriter() != null) {
printStackTrace(DriverManager.getLogWriter());
} -
Proxies - Queueing and Error handling features ???
My understanding is that you can have synchronous and asynchronous proxies. Do proxies have a queueing mechanism, and do they provide reprocessing and error handling features ???
Thanks in advance.Hi,
The error can happen due to application error, may be incorrect data or or wrong type of data.
Or system error, in case the call to SAP XI is not successful.
Youc an use fault message for the same.
If you want to catch these exceptions in SAP itself and send alert then you can either use standard FM for raising alert.
More here:
http://help.sap.com/saphelp_nw04/helpdata/en/25/a45c3cff8ca92be10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm
First configure CCMS in XI System:-
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
For Monitoring in the CCMS:-
http://help.sap.com/saphelp_nw04/helpdata/en/4d/6272376d3bfa2be10000009b38f8cf/frameset.htm
Go thro' this link for configuration scenario:-
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Inbound ABAP Proxy Trace and error handling
Handling Exceptions
ABAP Server Proxies - Fault Handling
Exception handling in integration processes
ABAP Proxy and fault messages
/people/bhanu.thirumala/blog/2006/02/07/abap-proxy--xml-to-abap-transformation
regards
Aashish Sinha
PS : reward points if helpful -
Logging | Stack trace gets truncated
I'm trying to diagnose a deployment issue I have with an EJB, and am examining the default trace log. I'm seeing a log entry related to my problem, but the stack trace is truncated:
at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2161)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
... 16 more
Is there any way I can configure the application server to not truncate stack traces and log them in their entirety? Or is there a better method of getting a look at what's going on when I'm trying to deploy my EAR file?You can configure the size and the storage location for trace files, using the Log Manager in Visual admin.
The trace files themselves are fine, that's not the problem. I'm talking about the actual stack traces themselves. Once again, here's a snippet from a stack trace:
Caused by: java.lang.NoClassDefFoundError: nl.hagaziekenhuis.medisurf.ejbs.favorieten.FavorietenException
at java.lang.Class.getDeclaredMethodsImpl(Native Method)
at java.lang.Class.getDeclaredMethods(Class.java:599)
at java.lang.Class.getInterfaceMethodCountImpl(Class.java:848)
at java.lang.Class.getInterfaceMethodsImpl(Class.java:863)
at java.lang.Class.getMethods(Class.java:808)
at com.sap.engine.services.ejb.deploy.verifier.RmiIiopUtils.isValidRmiIIOPInterface(RmiIiopUtils.java:52)
at com.sap.engine.services.ejb.deploy.verifier.RemoteInterfaceCheck.check(RemoteInterfaceCheck.java:40)
at com.sap.engine.services.ejb.deploy.verifier.session.SessionBeanCheck.check(SessionBeanCheck.java:76)
at com.sap.engine.services.ejb.deploy.verifier.Verifier.checkBean(Verifier.java:82)
at com.sap.engine.services.ejb.deploy.verifier.Verifier.check(Verifier.java:46)
at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:254)
at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2161)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
... 16 more
Now, note that I didn't add the trailing "...16 more" line; something in the system did that. I need the AS to log the entire trace for me, not just the first bit and then saying how much it didn't log. -
How to get stack trace of an exception
Hi,
I want to get whole stack trace and show it in a new Frame instead of showing on command line.
when I say,
e.getMessage();
it gives just first line, not rest of the part.
Can anybody help me with that?
Thanks in advance.StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
e.printStackTrace(pw);
String stackTrace = sw.toString();
Maybe you are looking for
-
Anybody have this TEXT TOOL ISSUE with CS5???
i'm on a pc that meets all system requirements for cs5 photoshop and notice that whenever i use the text tool and try to increase/decrease the size, leading or anything, i can not see my results in real time, i have to manually CLICK outside of the t
-
Moved from AVID to FCP...viewing on NTSC monitor question
I am in the process of migrating to FCP studio from AVID with mojo. With the mojo I used a S-video out to my NTSC monitor. Now with my FCP system, I have to always have my DSR-25 on and use the composite out to the monitor. Is there a better way? I a
-
Hi All we are using OBIEE 11g. There is a date prompt in dashboard. I need to put a default date to the propmt while runing the report. So i have selected SQL Result as default selection and Sql Query as below SELECT CASE WHEN 1=0 THEN AnyExistedDate
-
I cant connect ti server via resource central panel
I got this error pop-up " We're sorry, but there was an error communicating with the server. Please try again and if the problem persists, contact Adobe Technical Support. (503) " I have tried to enter http://resourcecentraldl.adobe.com/ and get "For
-
Hi there just wondering can the LRT224 handle load balancing a 130/7 and 107/30 connection. Thanks