Stacked Bar chart and Line graphs

I have a report in Crystal which has stacked bar chart and a line graph together in one report.
Is it possible to do the same thing in WebI . Can anybody share the experience.

Today you can only have a simple bar (not stacked) and line chart in Web Intelligence. We are looking to improve charts in the future. In the meantime you can look into the masher from the labs...

Similar Messages

Urgent: Combination of stacked bar chart and line chart

Hi,
I have the following request: First I need series depending on the year (no problem) and two stacks for each series (first problem). Now I need two line, line 1 for total of stack 1 and line 2 for total of stack 2. Both lines should have a label showing the difference from one to next series in percent.
Can something like this be done in BI Publisher. I got an excel sheet with such a chart, so it is possible there. Any templates, hints or tipps?
I need this very urgent because it's the main report of my project. So if this is not working I can stop the project and have to find another reporting tool.
Thanks
chrissy
Message was edited by:
chrissy

I've made again some tests by myself and recognized that there's something strange in the chart.
When I create a stacked bar chart with values of DURATION, labels for TYPE_NAME and series of YEAR the first thing is, that it is not ordered. So how can this be done?
The second error, is hard to explain ...
Let's say I've the following values:
        Type1     Type2     Type3
2005    1            2             3
2006    4            5             6
2007    7            8             9I would expect the following chart:
2005     2006     2007
1             4          7            Type1
2             5          8            Type2
3             6          9            Type3But the chart shows me the following:
2005     2006     2007
1             7          4            Type1
5             2          8            Type2
3             6          9            Type3You can see, the values are totally mixed, the code of the chart is the following:
chart:
<Graph seriesEffect="SE_AUTO_GRADIENT" graphType="BAR_VERT_STACK">
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<MarkerText visible="true" markerTextPlace="MTP_CENTER" />
<LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'YEAR'))}" rowCount="{count(xdoxslt:group(.//ROW, 'TYPE_NAME'))}">
<RowLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="TYPE_NAME">
<Label>
<xsl:value-of select="current-group()/TYPE_NAME"/>
</Label>
</xsl:for-each-group>
</RowLabels>
<ColLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="YEAR">
<Label>
<xsl:value-of select="current-group()/YEAR"/>
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="TYPE_NAME">
<RowData>
<xsl:for-each-group select="current-group()" group-by="YEAR">
<Cell>
<xsl:value-of select="sum(current-group()/DURATION)"/>
</Cell>
</xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
</LocalGridData>
</Graph>Otherwise I had made the following to have a stacked bar for duration and one for outage:
chart:
<Graph seriesEffect="SE_AUTO_GRADIENT" graphType="BAR_VERT_STACK">
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'YEAR')) * 2}" rowCount="{count(xdoxslt:group(.//ROW, 'TYPE_NAME'))}">
<RowLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="TYPE_NAME">
<Label>
<xsl:value-of select="current-group()/TYPE_NAME"/>
</Label>
</xsl:for-each-group>
</RowLabels>
<ColLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="YEAR">
<xsl:sort select="YEAR"/>
<Label>
<xsl:value-of select="current-group()/YEAR"/>
</Label>
<Label />
</xsl:for-each-group>
</ColLabels>
<DataValues>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="TYPE_NAME">
<RowData>
<xsl:for-each-group select="current-group()" group-by="YEAR">
<Cell>
<xsl:value-of select="sum(current-group()/DURATION)"/>
</Cell>
<Cell>
<xsl:value-of select="sum(current-group()/OUTAGE)"/>
</Cell>
</xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
</LocalGridData>
</Graph>The only thing I miss is a label for each stack, what is shown (so duration or outage) and of course the line.
Thanks for any help
chrissy

How to combine a stacked bar chart and a line graph together in one report

I have a report in excel that has stacked bar chart and a line graph together in one report. I am trying to recreate the same in Webi, Is this possible? Did any one have similar requirement, could you please share the thoughts?
Thanks,
Hema

May be I don't understand correctly...
But if its really to separate chart area's;
just copy the datablock and format one as line and the other as barchart...
Hope this helps,
Marianne

Bar chart and Line chart in a single chart??

Hello,
Was wondering if there is any way to create a bar chart and line chart in a single Flash or SVG chart? If not, are there any plans to introduce such a chart type in the future releases?
Regards,
Dev

Dev,
I don't think you can do that using standard Flash or SVG. However, you can do this
using my XML Chart Package
http://htmldb.oracle.com/pls/otn/f?p=31517:58
and the instructions given on
http://www.maani.us/xml_charts/index.php?menu=Gallery&submenu=Composite
You can modify the package to do that for you.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Code regarding Pie Chart, Bar Chart and Line Chart

Anybody having code for Pie chart, Bar chart and Line chart.......?

You may try jfreechart, jgraph,etc
here is the link for more java graphics software : http://www.kidslovepc.com/graphic-design/graphic-design-softwares.php

Interactive Bar/pie chart and line graph, data from excel/text file -urgent

Hi,
I have a huge data in excell sheet which keeps updating every month. Data basically consists of service provider and there respective subscribers from various regions of the country over the years. The requirement is to give the viewers an interactive page where in they can make various combinations and can compare, cross examine data according to thier choice.
We want the pie chart / bar graph or line graph to be created on the fly according to the combination made by the user.
The site is hosted on a red hat linux server. how can a connection to the excel spreadsheet be made or is it possible to read from the text file if the entire data is exported to a text file.
Is there any ready made tool/code available which can be customised according to the need.
Thanx in advance
Regards
Prakash

I certainly wouldn't pay for the graphing package at the previous link. check out http://www.object-refinery.com/jfreechart/ for a free, open-source, much better looking graphing package.

Stacked bar chart errors

I am creating a stacked bar chart and put a max row count of 50, but the graph actually shows more than 50. After the 50 data points, all of the rest of the dates along the x axis are out of order. Is there another location i also need to enforce this max row count?

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stacked Bar Chart Question

Hi, I am creating a stacked bar chart, and I am encountering 3 issues I hope you can help me with:
1) The chart has positive and negative values. I have zero based centerline checked, but I do not see 0 on the Y axis.
2) The applet width is 900 pixels. The chart can have a variable number of bars. When it has a small number of bars, they fill the entire chart. Is there a way to set the width to a fixed amount?
3) Is there a way to set a logical interval amount? Currently the numbering is not intuitive.
Thanks
p.s. We are using 11.5.3
Edited by: Richard Keegan on Jun 13, 2008 5:18 PM

Depending upon your query structure, you can force a zero based centerline by setting the Y-axis ranges dynamically. I am not working in 11.5.3 currently, but ran into a problem with line charts in 12.0.2. The zero centerline flag did not work, so I dynamically generated the ranges and linked them in.
You can probably do the same with a little extra BLS coding.
Mike

Stacked Bar chart mouseover options

I am using the stacked bar chart. When mousing over the bars, it currently displays the totals on the very top of the bar. Is there a way to make the total display inside (or at the bottom) of the bar?

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stacked Bar Chart Order

I am doing a stacked bar chart and I needt to control the vertical order of the bars. It seems to be always sorting alphabetically by my descriptions. My descriptions are 'No Mastery','Pre-mastery' and 'Mastery'.
I want:
Mastery
Pre-Mastery
No Mastery
It always shows as:
No Mastery
Mastery
Pre-Mastery
How can you control this?

Thanks Srinivas,
Thank you for your reply! that solution indeed changes the alphabetical sort, the problem is that the order is now fixed (i.e. "Mastery" is always number 1)
I need them ordered by a particular column (for example total sales) I guess I can use ranks instead of fixed numbers (i.e. concatenating the calculated sales rank instead of always using "1" for "Mastery").

Stacked Bar Chart Descending order Based on Height

I have a stacked bar chart and I want to order the bars based on height. The tallest bar on the left. Is there an easy and reliable way to doing this. Also, I can concerned that I have two heights of the same value.
Thanks in advance.

hi Eric,
i am assuming that your stacked bar chart has more than 1 Show Value, correct?
if so the following will work:
1) create a new formula that adds up all of the different show values
2) copy and paste your chart beside the existing chart so you don't inadvertently wreck it with the following steps
3) in the new chart, using the Chart Expert add the new formula that is basically a sum of all of the show values
4) you can use the Top N > All based on the new formula
5) right click on the chart and then go to Chart Options, Axes, and then check Dual Axes
6) you'll now get a Multi Axes tab...make sure that the new formula is alone in one of the columns
7) you can go to the appearance tab and change the Overlap so that gaps are reduced
8) you can now preview the report again, right click on the new series and change it to transparent
cheers,
jamie

Stacked Bar chart does not overlap series

I have a stacked bar chart with to values "Invoiced" and "Budget" and 2 categories YEAR and MONTH - the problem is that the bar chart shows the values Invoiced and Budget in Top of each other and Not overlapping each other . ex:
NOW: Invoiced = 200 Budget = 300 - Bar chart shows a column of 500 for the month (NOT correct)
What I want is to show 1 column for each month where up to 200 the colour is green and from 200 to 300 the colour is blue for example....
How to achieve this ?

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stacked Bar Chart - Hiding legends with 0 values

I'm using Crystal Reports 2008, building a report that will eventaully be called from an ASP.NET page.
I've built a stacked bar chart that is displaying values per month of the number of various vehicle types. The X values are the months, the Y values are the number of each vehicle type and the stacked series are each different vehicle type. However, depending on the months that the user asks for, there may be some vehicle types that do not have any data, thus the number is 0. Is there a way for the report to see that there is 0 data for this vehicle type and thus not include it in the legend of the various vehicle types?
First time poster, so hopefully I explained everything well enough. I searched the forums for anything matching Stacked Bar Chart and did not find anything. I don't know how to find/query SAPNotes.
Thanks.

Thanks for the response, but I'm not familar with Alters? Could you describe a bit more? I didn't see anything in the documentation about it.

BAM-Stacked bar chart

hi,
how to set Stacked bar chart horizontally instead of vertically(by default).

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Vertical Stacked Bar Chart

I have created Vertical Stacked Bar Chart and would like to put some space between value and value title for Y axis
Thanks

I believe you are going to have to edit the XML, scroll to the bottom of the Chart Attributes page and select Yes for "Use Custom XML", then you will have to change the chart area x/y/width/height. (you can do the same for the legend as well)

Stacked Bar chart and Line graphs

Similar Messages

Maybe you are looking for