Stacking SGE2010P with SGE2000

Hello,
I’m connecting SGE2010P switch with SGE2000 into a stack. I think, that stack building process should automatically set master and backup or slave switch.
I put both switches to factory settings and connected them to a stack from port 48 on SGE2010P to port 12 on SGE2000(I have also tried port 48 to port 24) and the switches are restarting all the time and the stack doesnt work.
I tried to set up the stack manualy - SGE2010P has Stack ID1 and SGE2000 Stack ID3 and it is still rebooting.
In users guide is written that the switches have to have the same version of SW. But there is no posibility to have the same version. How can i do the stack?
SGE 2010P
System Object ID 1.3.6.1.4.1.3955.7.4.2010.2
Base MAC Address 00:1e:e5:ae:78:83
Hardware Version 00.00.01
Software Version 2.0.1.75
Boot Version 2.0.0.00
SGE2000
System Object ID 1.3.6.1.4.1.3955.7.2.2000.2
Base MAC Address 00:22:6b:18:49:3e
Hardware Version 00.00.01
Software Version 1.0.0.45
Boot Version 1.0.0.05
In flash log of SGE2010P i found this:
2147475905
01-Oct-2006 01:05:47
Emergency
%2SWDMAIN-F-MSTRTMREXPR: SW2P_dist_tp_change_timer_expiry : TIMER expired on MASTER ENABLE unit  ***** FATAL ERROR *****  Reporting Task: BOXS. Software Ver sion: 2.0.1.75 (date  26-Feb-2008 time  12:45:44) 0x195e88 0x1934ec 0x5e6268 0x4379a8 0x43aa40 0x7585dc 0x80e7d0 0x80e984  ***** END OF FATAL ERROR ** ***   
Thanks for your inventions
David

David,
As you correctly indicated, the SGE2000 needs to have the correct firmware version for the stacking to work. Because the upgrade for this specific switch going to the version you need is somewhat tricky, my suggestion is that you call the Support organization who can help you through with this upgrade. I have given them a heads-up. The contact numbers can be found at the following link:
http://http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Thanks,
Ivor

Similar Messages

  • Stacking SGE2010P with another SGE2010P

    Hi,
    I would like to ask on how to stack 2 SGE2010P switches which particular port on the ethernet is to be use for the stacking. Because for SGE2000P we can use 12 and 24 to do stacking.
    Kindly help me on this issue
    Best Regards,
    Gilbert Gimeno

    Gilbert,
    SGE2010 - Default stacking ports: 24/GBIC 3, 48/GBIC 4.
    To configure stacking, see the "Administration Guide" - Chapter 2.
    http://www.cisco.com/en/US/docs/switches/lan/csbms/sfe2000/administration/guide/SFE-SGE2xxx_Admin_Guide.pdf
    Thank you,
    Darren

  • Apex 3.2 SVG Chart - How to plot Stacked Bar With Negative Values ?

    Currently Apex 3.2 Flash Chart (AnyChart 3.x) does not support Stacked bars with negative values.
    I try with SVG Stacked bars with positive values only, chart ploting works fine. When I add a new series with negative values (i.e -1) and I get a blank Chart region with no error.
    Based on this statement from Apex's documentation:
    *"AxisLine Indicates zero on charts that have negative values."*
    I appreciate your help on how to translate this statement into action ?
    (i.e how to override .Axisline class in CSS section ?)
    Thank you very much for your time.

    User614143,
    try to add the minumm negative value (but positive) to the parameter for the axis.
    e.g. show value+3000 (assuming -3000 is the minimum value)
    If you don't have a limitation for the negative values, it doesn't work. (or try to calculate first the most negative value in a before header process)
    hope this helps.
    Leo

  • Stacked chart with groups

    Hi
    I don't know whether this kind of chart is possible but perhaps someone can help me.
    I want to create a stacked chart with groups e.g. 6 sersies divided into two stacked bars (there are 2 bars per label, each stacked of three values)
    Does anyone know how can I do it?
    Regards

    Yes, but I want to have two bars (each stacked) per label (e.g. Jul-06).
      |    |  
      |____|  
      |    |   ____
      |    |  |    |
      |    |  |____|
      |____|  |    |
      |    |  |    |
      |    |  |____|
      |    |  |    |
      |    |  |    |
    -------------------||------------------||----------
       Jun-13                  Jul-13

  • Stacked canvas with horizontal scrollbar

    Hi,
    In a forms module I want to show a stacked canvas with a horizontal scrollbar. I have set the generator preference POPHSB on every level to yes, but the stacked canvas is still generated without scrollbar. In the Designer help topic "Generated stacked canvas properties" it is stated that the properties horizontal/vertical scrollbar is derived from the object library. But how can I set in Designer the name of an object library object for a stacked canvas? I don't want to override the object CGSO$CANVAS_POPUP because I also have other stacked canvases that doesn't need scrollbars.
    Regards,
    Vincent Botteman

    Hi,
    This is what I just have found: you must indeed create a new canvas object in the object library and then enter the name of the new canvas object in the property "Placement Template/Library Obj" of the first Module component on that canvas! Apparently, you can change the canvas by means of the first Module Component on that canvas.
    Regards,
    Vincent Botteman

  • How does Flex stack up with C#

    We are interested in Flex but just wondering how it stacks up
    with C#? Anybody with any comments would be appreciated/

    Check out my article
    Flex
    - What's in it for .NET developers?

  • Alert "Stack Overflow with Line at 2" if i calculate Total at onchange.

    Hi Friend,
    i am using java Script to Multiply Two Column and Total Come In to P1_total Item On onchange Action.
    Now Problem is when i enter Rate Value Into :p1_rate and Qty Into :p1_qty Item and press TAB when My Cursor is in P1_qty Item then value is change Into P1_total Item But Display a alert with Massage
    "Stack Overflow with Line at 2"
    My java Script is
    <script type="text/javascript">
            function getVal(pNd){
              return ($v(pNd)!= "")?parseFloat($v(pNd)):0;
              function taxamt(){
             $s('P1_TOTAL',getVal('P1_RATE')*getVal('P1_QTY'));
    </script>
    onchange apply in P1_QTY
    onchange="javascript:taxamt()"style="width:220px;"How to resolve it.
    Thanks

    HI Friends,
    i have resolve it.
    Actuuly i have Pass
    onchange="javascript:taxamt()"style="width:220px;"
    on both item 'P1_QTY' ,'P1_TOTAL'
    it should be pass only in ' P1_QTY'  item.Thanks
    Edited by: Vedant on Aug 15, 2011 11:38 PM

  • Image size and stacking problem with FF12 even in safe mode. Images are 5x the right size and overlayed on top of other pictures or text. how to fix?

    OK this problems limited to Facebook only. When logged in FF12 the entire page is scrambled. The pictures are stacked over each other and are 5 to 6 times the size their supposed to be. I have tried everything I could think of to fix this it even runs like this when in safe mode. I have uninstalled all plugins and all extensions I have uninstalled and even tried back dating FF. it's still so massively out of proportion that you can't do anything. .even when zoomed out 3x it's so large the pictures are larger than my screen. They are still overlapped so bad you can't do a thing with it. Even worse I uninstalled and installed pale moon and the effects migrated to that browser as well. Only browser I found unaffected by this is IE. Lord knows I don't wanna ever have to go that rout so I'm asking for help. I have a whole list of parsing errors and decoration drops, to many to post. any help would be much appreciated until it's fixed I'm stuck with IE. Chrome wont work with the software I run only IE or FF will.

    -> press '''CTRL''' + '''0''' (zero) to '''Reset''' Zoom
    * For details, see this article -> [[How do I use Zoom?]]
    Check and tell if its working.

  • Stacked BarChart with drag and drop

    Hi,
    I have a BarChart with a stacked BarSet that can be drag and
    dropped. The problem is that when I click on a BarSeries in the
    chart to initiate a drag, only that BarSeries is being visually
    dragged. I would like to visually drag all the BarSeries in the
    stacked BarSet.
    This is better explained with a "picture". Suppose I have the
    following stacked mini-chart:
    XXXXXYYYYYYYYYYYYYYZZZZ
    XXXYYYYYYYYYZZZ
    XXXXXXXXXXXXXXXXXXXXXXYYYYYYYZZZ
    XXYYYYYYYYYYYZZZ
    XXXYYYZZZZZZZZZZZZZZZZZZZ
    Here X, Y and Z are BarSeries. When I click on ZZZ to
    initiate a drag, only the ZZZ is visually dragged. I understand
    that this is okay, but in my case I want to see XXXYYYZZZ visually
    dragged.
    How can I do this?
    Cheers,
    Andrej

    "mavdzee" <[email protected]> wrote in
    message
    news:gavo13$lpu$[email protected]..
    > Does anybody know this? How can I select sub-bars in a
    stacked BarSeries
    > in ActionScript? Is this possible?
    At a guess, I'd hide the real bars and make a dragProxy from
    a bitmap
    capture of the entire stack...

  • Colum Chart - (3-D) Stacked : compatible with negative values ?!

    Hi,
    In our VC model we are showing a Column Chart - 3-D Stacked.
    On our development server everything works fine. (the query gives positive values for the KPI's only btw)
    In production the bar chart is not being displayed. The bar remains on value 0. I'm quite sure this is related to the fact that we have some negative values on production for some of our keyfigures that we need in the chart. Many others are positive. This is not compatible with stacked charts I think, but.....on our quality environment the chart works fine with negative values for the same KPI's as well. The negative values are more or less ignored in the graph on quality.
    So my question is : Is it correct that negative values are officialy not compatible with VC stacked charts ? Why is it then working (ignoring the negative values) in some circumstances and other circumstances not ? The only difference between quality and production is that the KPI values are different but the same KPI's are negative anyway on these environments. The models (queries and VC model) were transported from dev->QA and to production.
    thanks for any feedback.

    Hi Todd,
    Depending how you look at costs, it's not expensive.
    A single developer license of Anychart 5 costs USD 499.00 - 15% if you use the APEX15 promotion code.
    If you spend a couple of days trying to integrate with something else you easily went over that amount.
    So really, it depends in which perspective you look at it. The workaround with Excel, is that really an option? How long would it take for every person wanting to see that screen? How long would it take before you get to $440?
    Anyway if you wait till next year, Anychart 5 is included in APEX 4.0 and you have it out of the box.
    Just my thoughts,
    Dimitri

  • Can I Stack Switches with differents Part Numbers? Is it possible??

    Hi,
    I have a doubt, I need to buy 4 Switches Cisco 3750-X, but 2 with UTP/RJ-45 Ports, and 2 with STP capability.
    My question is, for example, Can I stack 2 WS-C3750X-48T-E and 2 WS-C3750X-24S-E??

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    The only limitation of stacking different 3750X models is the feature set of the installed IOS.
    I.e.:  "The Cisco Catalyst 3750-X Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3750‑X Series LAN Base switches. A mixed stack of LAN Base switch with IP Base or IP Services features set is not supported."

  • Stacked bars with "stairs" in WAD

    Hi everybody,
    I've got a special problem in Web Applications Designer. I know how to build a chart (type: stacked bars). But is it possible to get these bars displayed like stairs?
    It should look like this:
    <--100%--
    >
    70----
    ****************|---20---|
    ***************************|10|
    "*" represents empty space
    In comparison to a normal stacked bars chart (w/o stairs):
    70----
    20-----
    10
    I would appreciate any help.
    Best regards,
    Christoph Riesel

    Hi Frauke,
    Sorry for late answer and thank you much for your comment!
    The problem is that waterfall or delta diagram always show the end values and not only the start value and the interim values.
    In the meantime I learned, that the name of the diagram I want to see is called "pareto diagram".
    My conclusion from other forums contributions regarding "Pareto" is, that you need to calculate with cumulated key figures.
    As BEx is not able to calculate with cumulated key figures (BEx always calculates with non-cumulated figures) the only solution would be to create a "cumulated key figures" in the InfoProvider directly. This makes it quite complicated as these cumulated key figures should be based on TOP20 customers in our reporting...
    So maybe the best solution is to use a different diagram type if you consider "cost-benefit ratio" instead of Pareto.
    Regards,
    Christoph

  • Strange stack behaviour with referenced files

    I have just started to notice peculiar behaviour with referenced images within stacks. I have been reviewing last years pictures with a view to clearing out the junk.What I have found is rather alarming in that on clicking a stack to open it all the images within the stack were the wrong pictures, wrong as in taken with a different camera in a different year.The top picture does not seem to be affected.On attempting to find the correct files using 'manage referenced files' all the wrong images are shown as found in the list view with their own file names at the same time the thumbnails (top right hand pane) show the original correct file names but with the wrong thumbnails,Aperture does not realise that it is referencing the wrong files and so will not let me reconnect to the correct files.
    Anyone with a similar problem or a cure for this behaviour?

    Ok I have deleted and rebuilt thumbnails files to no avail.
    What appears to be happening is that aperture is using the wrong file-path for the affected pictures.
    I keep all pictures arranged by date order so for example where the correct file path for an image would be;
    Raid Zero/Pictures/2006/0609/060928/pict3722
    Aperture is giving a file path of
    Picture Library/2007/0712/071223/_DCS1023
    in the manage referenced files pane it shows the wrong path as above, the thumbnail picture is of the wrong file but the thumbnail name and date is correct.
    Interestingly since rebuilding the thumbs it is now possible to reconnect to the correct original file whereas before the reconnect option was not available, however it is only possible to do this one file at a time,the re-connect all function does not work presumably because Aperture is not aware that its filepath is wrong.
    Oh dear.... Aperture has just crashed,this immediately after reconnecting 6 files and waiting for the files to update to the correct image in viewer mode.
    GRRRRRRRRR!

  • Stacked Canvas with one block displaying twice

    I have a question regarding the Stacked Canvas. I have to create a calender for clients. (I am using stacked canvas to do that).
    In the 'calender' table i would have the information like ClientID, Year, weekno, start date, end date.
    So i created two blocks for 'Calender' table in this form. One block for Content canvas with ClientID and Year (Block1). And another block (Block2) on Stacked canvas for weekno, startdate and enddate.(normally there will be 52 weeks sometime 53 weeks)
    On the Block1 it suppose to display the ClientID and Year once. And in the block2 (stacked canvas) it suppose to display 53 rows with weekno and the start/end dates.
    When i create a new row in the block1 for clientid and year (1234, 2008) then the block2 will be populated with 01-jan-2008 to the 31-dec-2008. But the problem i am having is when i try to save it is trying to save two times one from block1 and once from block2 resulting in a unique constraint error.
    how should i structure this so it saves only once?
    I tried to keep the clientid and the year in block1 as non-database items and copied those values into the block2, that way it saves correctly but when i try to query on the upper block it gives me error.

    But you only have one table. You need two tables for master-detail. Can you normalize the calendar table and change it to two tables (master-detail).
    See
    Re: regarding display of records in header and line level
    Gerd offers a solution for two blocks and one table. Maybe that will work for you.
    Message was edited by:
    Mark Roberts

  • Stacks replaced with question marks. Why?

    I made several stacks with Apple and 3rd party applications. After the mac was awakened from sleep mode, the stacks were replaced with question marks. Anyone know why? and how this can be avoided?
    Thanks

    I finally figured out what I was doing wrong. I listened to the Apple Rep. He told me to make a folder on the desktop, put in the aliased apps and put it as a stacked folder on the Dock. Wrong!!! This folder has to be made as a subfolder of the Documents folder. Then this folder holding the aliased filed is dragged to the Dock. The reason is simple. Whatever folder is made on the Desktop and put on the Dock as a stacked folder leaves a copy on the Desktop. When this is Trashed and the Trash bin is emptied, so is the stacked folder. By dragging it from the Documents folder, nothing is left on the Desktop.

Maybe you are looking for