Stacks aren't working

I have stacks for my documents and for my downloads. Neither of them are working. I click on the stack, and all of my documents/folders fan out, but then when I click on the folder that I want to open - nothing happens. They used to work, I don't know what happened. I tried removing the stack and then recreating it, but that didn't work. Is anyone else having this problem? Any suggestions?

tried it but didn't work (removing the stack and putting it back) just did the same thing. Have ended up re-installing leopard AGAIN, was having no end of problems with permission of files because I hadn't done a full restore from time machine and it was a slightly different user account so getting everything working properly with permissions and all my data back was a pain!! So installed all over again and is all working now, so thanks anyway

Similar Messages

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.

Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not showing in the task bar at all.

Hi SBrwn,
Thanks for visiting Apple Support Communities.
The symptom you're describing can be frustrating to troubleshoot as our options are limited. I do suggest resetting the System Management Controller (SMC) if you have not already. This step can help you regain use of USB and Bluetooth.
Follow these steps to reset the SMC on your iMac:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer. [by holding down the power button]
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
You can find these steps and more information at this link:
Intel-based Macs: Resetting the System Management Controller (SMC)
All the best,
Jeremy

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

You cannot merge Apple ID accounts, that has never been supported.
You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

USB Ports Aren't Working

I have a HP pavilion g series laptop. I'm not sure what it is or anything, that's all I know about it.
But anyway, my USB ports aren't working.
I tried plugging in my mouse and i tried plugging in my xbox 360 controller, the lights come on for a few seconds on both of them, but then they went off and my computer won't pick them up.
What do I do to fix it this problem?

Try to go into device manager and see if you have any yellow !s or red triangles near the usb ports. Remove all the usb ports and hubs and reboot the machine. The drivers should reload automatically. Do the hard reset by removing the battery, unplugging the power adaptor, holding in the power button for a full minute, putting the battery and power adaptor back in and try it again.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

I sprayed it a year ago i really like the keyboard and i really need it can it be recovered??? My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

There is almost no chance it can be recovered, except at a cost far greater than a new keyboard. Once wet, spraying with a cleaner will not do any good and most likely will make the situation worse.
Best thing at this point is go to your Apple store, or the on-line store, and buy a new keyboard. Water damage is not covered by the warranty or AppleCare.

My sound effects aren't working, how do I get them to work again?

On my iPad my sounds effects aren't working and it's on loud. I've been into music but it won't let me change the volume. It's just dark grey and won't let me touch it. Also the volume control on the side when I put it onto loud the sound effect pops up in the grey box but doesn't let me change the volume there either... I've also been through the settings and cannot find anything or anywhere where it will let me change the volume manually or invade it had been turned off by accident. I can't listen to music or hear when it goes off!!!
PLEASE HELP!

Is it still paired to a bluetooth device?
Is it connected to an AirPlay device?
This is for iPhone but still applies to iPad:
http://support.apple.com/kb/TS5180

Some Finder Sounds Aren't Working (Trash File and Move File)?

Last night I noticed that *some of the finder sounds* aren't working (trashing and moving a file/folder) on my mac mini. The rest of the finder sounds seem unaffected (emptying the trash, removing an icon from the dock). I tried some solutions online with limited success.
Odd things that are happening:
1) After a reboot, the first time I delete a file or move a folder, the *monitor resets itself*. Kinda like when you change the resolution. My TV loses the feed for a sec and quickly reestablishes it. After this happens, no finder sounds for moving and trashing
2) I heard some people were having this same problem because of coreaudiod.plist files (Library/Preferences/Audio. When I copy the com.apple.audio.SystemSettings.plist to the desktop these finder sounds return, but just for this file. See http://discussions.apple.com/thread.jspa?messageID=10465859
3) I noticed these problems after I started using the Kanex Mini DisplayPort Adapter To HDMI 1080p Video w/ Digital Audio. http://kanexlive.com/products/item.aspx?id=3495 But, I tried switching back to the old setup of a basic minidvd to hdmi and a rca y cable and it made no difference.
4) I also completely did a fresh install and everything worked fine until late in the process after I did a reboot (see point 1). Is it a third party software problem? I installed the HippoRemoteVNC that allows me to take control of the computer with the iphone. I also have installed Plex, Boxee, XBMC, Perian codecs, Hulu desktop, Quicktime 7, and Transmission.
System Specs:
Computer: Mac Mini (Late 2009) - 2.26Ghz, 2GB RAM, 10.6.1
Monitor: Panasonic TH-42PZ700U 42-Inch 1080p Plasma HDTV
Video/Audio Connection: Kanex Mini DisplayPort Adapter To HDMI 1080p Video w/ Digital Audio
Any thoughts? Thanks!!

Go to your /Applications/Utilities folder and run the Audio MIDI Setup application.
Confirm settings there match your expectations.

Links in email aren't working and ads aren't displaying in email either

Links in email aren't working and ads aren't displaying in email either. What settings should be changed to correct this.?

Go to settings>general> restrictions and see if anything has been turned on.

Earbuds aren't working again with phone

hello, once again my earbuds aren't working with my phone. this was happening last weekend. i tried various headphone with phone to no avail but they and the original iphone earbuds worked just fine with computer. monday i took to phone to apple store and they restored phone and buds worked fine. came home setup as new phone, put everything back on it and worked for a bit and once again not working. I'm wondering if they aren't working because of the latest software version (5.1.1) because they were working fine before then.
Anyone having a problem? I can't afford a new phone at this time.

if when you restore and it works that means it is software related when you then restore from a back up you just took all the soft ware that was on the phone and put it back. meaning what ever cause it not work is now back on your phone causeing it not to work agian. In situation like this its not 100% that you can use your back up because what ever cause the issuse may be on that back up

Extensions aren't working in Indesign & Photoshop CC

Kuler and Adobe Exchange aren't working in Indesign CC and Photoshop CC. I'm using Windows 7. Extensions appear and can be clicked on, but nothing happens in Indesign and Photoshop returns the message, "cannot complete command because the extension could not be loaded", and the mini bridge extension returns the same kind message in Photoshop CC. All Previous versions from CS5 - CS6 are still working fine. Any help would be appreciated.

First, ensure the photoshop and indesign up to date.
Then, If the problem still exists, please attach a screenshot to show the problem

TS3274 How come My location services aren't working, I've reset the location warnings.

How come My location services aren't working, I've reset the location warnings.

For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
You can confirm that by going to well-know place with wifi like Starbucks or McDonalds

My apps aren't working on my ipod after the new download, how do i get them to work?

My apps aren't working on my ipod touch after I downloaded the most recent version. How do i get my apps working again?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

Cameras aren't working

front and back camera aren't working what am I supposed to do most of my apps use camera

Define "aren't working." How long? iPhone model, iOS version? What basic troubleshooting steps did you take (i.e. restart, reset, restore)?
Note: there is no character limit for posting here and punctuation is appreciated.

Converted WinHelp to HTML Help and context-sensitive topics aren't working.

Converted WinHelp to HTML Help and context-sensitive topics
aren't working. Anyone run across this?

I am a developer and we have big project that needs to be
converted from winhelp to HTML help. I received only the .CHM help
file from the help auther. I added the HTMLhelp.lib file and
HTMLhelp.h file in to my project. I tried to change atleast one
page of the dialog. I added on helpinfo function htmlhelp function
call and hard coded the .chm file path and for the right click I as
well did the same thing. But I am getting "No Help topic is
associated with this item" upon F1 key and crash after the right
click with wincore.cpp error.
The code is as below.
BOOL CCnvCfgGenNRecPage::OnHelpInfo(HELPINFO* pHelpInfo)
// TODO: Add your message handler code here and/or call
default
if (pHelpInfo->iContextType == HELPINFO_WINDOW)
int nCtrlId = pHelpInfo->iCtrlId;
DWORD dwContextId = pHelpInfo->dwContextId;
//THE NEW HTMLFUNCTION CALL
::HtmlHelp((HWND)pHelpInfo->hItemHandle,
"D:\\vista_setup\\Patmob\\PatMob.chm",
HH_TP_HELP_WM_HELP,
(DWORD)&IDARRAY(nCtrlId, dwContextId)) ;
THE OLD CODE
::WinHelp ((HWND)pHelpInfo->hItemHandle,
AfxGetApp()->m_pszHelpFilePath,
HELP_WM_HELP,
// HELP_WM_HELP flag brings up pop-up help and expects an
array
// of DWORD pairs of the control ID and the context help ID
(DWORD)&IDARRAY(nCtrlId, dwContextId));
return TRUE;
DO I NEED ANY OTHER FILE? Should I checked out the dialog h
file and .hm file which compling the html related code?
Regards,
Kreena

Stacks aren't working

Similar Messages

Maybe you are looking for