STAD REPORT exute for one day if i wish to run for whole year than?
Guru's
Can u suuggest how to excute STAD REPORT for whole year.Is it possible if yes then wht steps to follow.
Kindly suggest.
Thanks in advance
Daily execution of any program can be done using Batch job execution i.e. Background Jobs.
Goto Transaction SM36.
Define the Job details
& Schedule it.
Similar Messages
-
my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info CSI 000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info CSI 000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info CSI 000004d5 [SR] Verify completcannow detail I get this resultand this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir -
Recovery Point Status Report Shows Only One Day
Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
a week and the recovery point status is set to a month. We are running System Center 2012 R2 DPM.
Any help is appreciated, thank you for your time.
gHi,
Check your status report granularity settings for each protection group and make sure it's set for 1 day instead of weekly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Hi,
While fetching data though IR wen client from workspace for a year(all 12 months) I am getting error as ("Out of Memory .Advice : Close other applications or windows and try again").
If I am trying same through IR studio it does not give any output and show me same repoting front page.
If i am selecting periods till 8 months it is giving the required data in both IR web client and IR studio.
Could you please suggest how can we resolve this issue.
Thanks,
D.N.RanaIssue Cause :
Sometimes this is due to excessive data which brings the size of the BQY file up around one gigabyte uncompressed in size (for processing may take twice as actual RAM, plus the memory space space for the plugin, and the typical memory limit on a 32-bit system is 2 gigabytes).
Solution :
To avoid excessive BQY size exceeding memory availability:
Ensure that your computer has at least 2Gb of free RAM before he runs IR Studio.
Put a limit to the number of rows that can be pulled down: Right click on Request label of Query section and put a value in Return First xxx Rows (and check the check box).
Do not pull down more than 750 MB of data (remember it may be duplicated while processing).
Place limits or aggregations in Query section (as opposed to Result section) to limit data entering the BQY. -
Reminders created on iPhone are one day off in iCal
I am overjoyed with the inclusion of reminders in iOS 5, however when I create a new reminder on my iPhone 4S it shows up in my iCal (Lion 10.7.2) as created one day ahead of the original "remind me on" date on the phone. When I manually try to override the date in iCal to the correct date, it retains the wrong date (one day ahead). Anyone else run into this issue? Any yes, I am frustrated you can't set a due date for the reminder on the iPhone, but there's another thread on that one somewhere. Thanks for any help or insights.
I too have noticed a similar problem.
When I create a reminder on my iPhone 4S (and begrudgingly set a time, even though I want it to be all-day), it shows up in my iCal (Lion 10.7.4) as created the same day.
However, if I want to edit this reminder in iCal (i.e. delete the timed 'On a Date' message that comes with it…), the date you put–in the best way that I can desribe–has a "-1 day" attached to it.
Scenario:
You create a reminder on the iPhone 4S for Today, 5/29/2012.
In iCal, you:
1. change the date to 5/30/2012. Nothing happens (because 5/30/2012 -1 day = 5/29/2012).
2. change the date to 5/31/2012. The reminder changes to Tomorrow (5/30/2012).
3. change the date to 5/29/2012, which should do nothing, but changes it to Yesterday (5/28/2012).
Any reminders created in iCal do not have this problem.
I'm hoping that this will all get fixed when Mountain Lion comes out, and reminders becomes it's own separate app on the MacBook. I really do hope they put a field for all-day, otherwise I will seriously reconsider the use of reminders. -
Generation of Annual Leave Quota at a time for the whole year
Hi All,
Kindly give some suggestions.
I am working on Time evaluation. We have a quota , Annual leave which is now given on monthly basis, means lets 12 annual leave are for whole year and employee are getting 1 leave on each month.
Now my requirement is to give this quota at a time in the start of every year. That means all the 12 annual leave should be generated in the start of a year.
When I select the option no pro rata calculation then I am getting all this leave in the start of the year. But when an employee is joined in the mid of the year then also 12 leave is been generated which is not correct.
Please suggest me how to make this leave as prorated so that for new joinee , this leave is generated taking into account the period and generate the prorate value for the whole year at the time of joining.
Thanks
Tanuja.Hi Sikinder,
I am using + time evaluation Status-2. We have to generate quota in PT60 for each period.
Write now we are getting annual leave quota getting generated in monthly basis. We want to genarate whole quota for the year in the 1st month of the year.
When I have given calender year in the accrual period , i am not getting any quota in the 1st month rather getting the whole quota in the end of the year.
Please suggest me what to do.
Regards,
Tanuja. -
Hi,
Iam getting stad report for last one week,iam not getting the stad report for last month.i want to get stad report for particular day in last month.how to rectify the same.
ThankuHi,
rsau/local/file /usr/sap/LID/DVEBMGS00/log/
you will have to set DIR_AUDIT parameter instead of it.
Set the following parameter with reference value:
Parameter Description Reference Value
DIR_AUDIT Directory for security audit files S:\ECP-AUDIT\ECP\DVEBMGS00\ECP_security_audit_log
FN_AUDIT Name of security audit file ECP_AUDIT_++++++++.AUD
rsau/enable Enable the Security Audit Log 1
rsau/max_diskspace/local Maximum space for security audit file 2147483647
rsau/max_diskspace/per_day Maximum size of all security audit files per day (If you wish, otherwise let it be default '0')
rsau/max_diskspace/per_file Maximum size of one single security audit file (If you wish, otherwise let it be default '0')
rsau/selection_slots Number of filters to allow for the Security Audit Log (If you wish, otherwise let it be default '2')
rsau/user_selection Defines the user selection method used inside kernel functions (If you wish, otherwise let it be default '0')
activated profile in sm19,still iam not getting audit log for last week in sm20.
After Proper setting of Security Audit log parameters, the Application Server needs to be restarted to make the changes effective. You will only get the Audit Data since the activation of valid Security Audit parameter.
Regards,
Bhavik G. Shroff -
-reformatted computer, reinstalled everything
-downloaded the newest version of mozilla
-happily went online for one day
-next day, browser does not load
-later the next day, browser doesn't even open up
-now when i go to open mozilla, something like this shows up:
"server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...HI Juanverano,
Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
Date data from Crystal Report one day less than Date from Source
Hi,
I am creating a Crystal Report 4.0 for Enterprise Users (Client Version only) based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Crystal Reports, it is displaying as 1 day less from the actual data. For example, in the BEx Query, 'Date' = 11/01/2011. In Crystal Reports, it is showing up as 10/31/2011, which is one day behind. I'm not sure what's going on.
Please help!Well, this is as weird as it gets!
Here are the observations on SP02:
1) The Date Characteristic is a day off in the report while the 'Key' shows correct date
2) It displays in the '30.01.2011' (DD.MM.YYYY)format
3) When you right-click this field to change the date format, the date option is missing
4) You create a formula to see if this is a date and it returns True. The formula you can try is :
isdate(). It returns False for any other function like isnumeric() etc
5) So, this is a date filed, or CR4E thinks this is a date field, however doesn't let us change the format
6) You cannot use this field with date functions like cdate(); weird!
7) The only way you can show it the way you want is to write this formula:
*mid(,4,2)&"/"&left(,2)&"/"&Right(,4)*
This is still a string field, however displays as MM/DD/YYYY.
In Crystal Reports 2011, however, the following formula on the same date field returns a date value, meaning you can further right-click this formula field to change the date format like a normal date field:
cdate(tonumber(Right(,4)),tonumber(mid(,4,2)),tonumber(left(,2)))*
The same formula, however, throws a 'String is non-numeric error in CR4E and I found that it doesn't like this:
*tonumber(Right(,4)) ; same error
I've tried a lot of combinations to make this a date field in CR4E, however none works!
So, the only option is to use the formula that I mentioned above.
P.S: If you install Patch 2.10, you'll notice that the Characteristic value shows the correct date. For some reason though, it is in the same format as the 'Key' and if we wish to change the date format, the only possible workaround is to extract the numbers and join like I suggested above.
Hope this helps!
-Abhilash -
Google calendar one day off for reocurring appts
I have an appt that repeats every third day and for some reason when my Goole calender synchs to my Pre it shows the appt one day off of what it supposed to be on the phone. The appt show correctly on Google but not my Pre. For exapmle if the appt is is on the 25th it show as the 24th on my pre and then every third day after that throwing the dates way off. Is this happend to anyone else?? Is there a fix??
Post relates to: Pre p100eww (Sprint)I guess you havethe same problem as me... Check if the calendar you are talking about has a different time zone then your Pre... There is an annoying bug where recurring appointments in calendars that have a timezone before your pre get moved one day... sadly noone seems to be willing to address my bug report...
-
Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?
K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality. -
Error is report generation for one employee
Dear SAP Experts,
Please provide immediate solution to this issue.
Blood Group details of one Employee is reflecting multiple times while generating report but only one record is maintained in master data.
What could be the possible reason for this error ?
please give some solution ASAP
Regards,
TDPlease, stop using words "immediate" and "ASAP" that is just rude behaviour.
You did not provide the information - which report are you running? What do you mean by 1 record in master data? Does that mean there is only one record in PA0028? If you look technically at the structure of the infotype, you will see that there can be multiply (in fact exactly 30) values / combinations maintained for one single record in the infotype. -
Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one. Will they do the same for me? Is there any other way I can get all my pictures from my iPod without iCloud set up? Would Apple be able to lock up my iPod so they cant use it at all? Please help me, thanks (:
ipod touch lover wrote:
Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do?
Nothing... why would they do anything?
Apple does not provide insurance and they are not law enforcement. -
My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
BrianI found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.
Maybe you are looking for
-
Is there any way i can transfer iTunes credit from one account to another?
I have $20.00 sitting on one account but i want to transfer it to my other account. I tried buying myself a gift certificate, but as i already knew, you an't with the iTunes credit. is there any other way i can do this. Thanks in advance, Alex Kirwan
-
Hi guys Hope someone can help me here- I broke my iPhone4 at Xmas and found as it was out of warranty I had to buy a replacement for £119 -fair enough! So whilst not being able to afford this being January the worst month for self employment I borrow
-
How do i edit move file in pre elements
I shot in a canon 60d the footage is not supported in pre elements ,how do i edit move file in pre elements
-
Can't start samba (complaining about how I'm using the 'samba' binary)
I'm unable to start samba: ➜ ~ sudo systemctl start samba.service ➜ ~ sudo systemctl status samba.service samba.service - Samba AD Daemon Loaded: loaded (/usr/lib/systemd/system/samba.service; enabled) Active: failed (Result: exit-code) since Tue 201
-
hi, is it possible to make table editable table control in abap webdynpro. if possible then how?