Stage Analysis Report Issue

Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
Sharat

Hi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon

Similar Messages

QM Vendor Analysis Reports Issue

Dear all,
I have a problem in QM Vendor Analysis Report.
My system is using inspection lot origin 05 Other Goods Receipt for some inspection types used for manual inspection lot. However the inspection types of inspection lot origin 05 cannot be show in the all QM Vendor Analysis Reports (e.g. MCVA. MCV1), while the reports for material analysis can show all inspection types. Now only inspection types of inspection lot origin 01 can be show in the Vendor Analysis Reports.
Can anyone please help..
Thank you.

Hi,
Thanks for you reply.
I think may be the design want to make the the manual inspection lots difference from the system generated inspection lots, and the number range can also be different.
The system is already in used and there are inspection lots created. Is there any ways to solve this issue?
Thank you.

Open PO Analysis - BW report issue

Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM     DOC_ITEM      DOCTYPE     COMP_DEL
650000001       10     UB        X
650000001       20     UB        X
650000001       30     UB
650000001       40     UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath

Hi Priya and Reddy
   Thanks for your response.
                     Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                    I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                   In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
    41               6500000001            30                    11                            X           ---
    42               6500000001            30                    11                            ---           X
    43               6500000001            30                    10                            X           ---
    44               6500000001            30                    10                            ---         ---
(Here --- means blank)
Thanks and Regards
sampath

Issue while opening the web analysis reports

Hi,
One of our user is not able to open a web analysis report with an error messages saying
"Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
"Document does not exist or no authorization to open the document"
Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
What could be wrong? Any suggestions please.
The only thing I see here, something wrong with userd ID or password.
Thanks
Prasad

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Issue in Due date analysis report S_ALR_87012168

Hi Friends,
We have a strange issue regarding due date analysis report (S_ALR_87012168)...
When i execute this report it displays different amounts in "Not Due" column under 0-30 bucket. In 0-30 bucket, under not due column it shows 10,000 and under total open items column it shows 15,000. How it is possible?
Thanks to everyone
Anifi

Hi,
This has been closed due to Local and Document currency prob...
Thanks

Issue with risk analysis report in GRC10.0

Hi All,
We are running the user risk analysis report from NWBC: Reports and Analytics -> Access Risk Analysis Reports -> User Risk Violation report.
This report is not fetching all the data even though user has all the required authorizations.
We are getting the data when we execute the dashboard reports.
Any one has idea?
Cheers
Hari

Alessandro,
Thanks for the reply. I am aware of this.
Problem is when dash board report is showing the risk for the user but risk anaylsis report in Reports and Analytics is not showing the risks to that user.
As per our investigation, the risk data that is displaying in the risk anaylsis report in Reports and Analytics is incomplete. We didn't find any errors in SLG1. Also there is no issues from authorizations side.
Regards
Hari

BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

Hi All,
This is regarding BI 7.0 Analysis Authorization issue.
Overview:
we have restricted some queries at infoobject level.
Issue:
a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
d. Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
e. But when we execute the same report with Auditors ID then we get a blank page.
Any idea why this is so?

Hi Neha,
I tried the below also,
GL Acnt
I EQ 0000134010
I EQ :
but still it didn't work.
No Infoobject is missing in Authorization Object.
For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
As mentioned earlier also it is giving me the below message,
""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION RS_EXCEPTION 301CL_RSR_RRK0_AUTHORIZATION AUTHORITY_02"
Kindly suggest, since this is a show-stopper for us!
Thanks,
Ishdeep Kohli.

MDX Generation Issues (using Evaluate) in OBIEE Analysis Report

Hello Everyone,
I am trying to use Evaluate function in MDX (on a OBIEE 11g Analysis report) to restrict the number of values that i am pulling from the Essbase cube. The MDX Evaluate syntax looks something like this
EVALUATE('TOPCOUNT(%1.members,100,([Dimension1],[Dimension2],[Dimension3],[Dimension4]))',"Accounts"."Gen10,Accounts")
EVALUATE('TOPCOUNT(%1.members,100,([Dimension1],[Dimension2],[Dimension3],[Dimension4]))',"Products"."Gen10,Products")
I am putting the above evaluate formula in the "selected columns" on the OBIEE Analysis report. So i am pulling accounts, products and the measure from the essbase cube.
However I am getting the following error when the analysis report is run
Query Status: Aggr Essbase Error: *Repeated dimension [Accounts] in MDX query*
Do we need any configuration changes/ settings on the RPD model to ensure we dont get this error?
Regards
Aby

Hi veeravalli,
Thank you for you reply. I got it.
However, any idea to solve the issue?
I tried to do it in RPD by case when,
e.g. Acutal Sales: case when scenario='Actual' then salesamount end
Budget Sales: case when scenario='Budget' then salesamount end
Actual/Budget%: (Actual Sales/Budget Sales) *100
So there is no error, Actual Sales and Budget Sales are correct, but Actual/Budget % shows nothing in report
Thanks.
BCHK

Unable to open web analysis reports through workspace

Hi,
I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
Thanks in advance,
John

Hi Atul,
Try using the in built config checker:
http://localhost:16000/WebAnalysis/config
This has several tests you can perform to see what's running.

Data Ownership in Sales Analysis Report

The company has sales employees around the world and the company is not interested that each of them
can see the others sales, so when an employee runs a sales analysis report they should only see
their own documents but it not happened despite the data ownership funtion was activated and all the
options related with the sales analysis excluded forms was filtered by header only.
According to SAP Support team their comments were:
"We have reproduced the issue in our testing database. After verification, we noted that this is the current system definition as described in the attached Data_Ownership2004_A.pdf file. In page 11, it mentions that Data Ownership Authorizations apply to sales and purchasing documents, the Open Items List, Sales Opportunities and Sales Opportunities Reports. This is why the header filtration does n ot work in Sales Analysis Report.
As the requirement is currently not available in the standard software version of SAP Business One, we would like to ask you post your requirement in our SAP Business One Product Development Collabora tion forum."
Due to the current situation and the disconfort that this can produce, I will appreciate a lot your help.
Thanks in adavance,
Manuel Barrero

Hi Vassilis,
Sorry, but in my opinion it's correct.
We also use Drop Ship and like you said in the Stock Posting List we don't have any document and it's perfect. In other way when we sell an item we want and it's true the quantity that B1 is showing.
We want to see the for a itemcode we sold 100qty qith the value of 1000.
There's no way to avoid this SAP B1 behaviour.
Kind regards,
Augusto

Query to mimic the items tab of the Sales Analysis report.

Hi there,
I'm currently looking to create a query that mimics the behaviour of the Sales Analysis report in B1. The items tab of the Sales Analysis report provides all the data I require - the only issue is that I would like to merge this data with some other data regarding current on hand stock quantities etc. and therefore I would like to be able to pull out the query behind the Sales Analysis report.
I'm assuming this cannot be done and therefore I'm attempting to build a query to replicate the results. The query needs to show Item No, Item Description, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for items within a given period.
If this can be done relatively easily, can the query then be modified to show all items (including items that haven't sold in the date range) merely with '0' for Quantity Sold, Sales Amt etc. if the item hasn't been sold in the period, and the appropriate figures if each of these columns if the item has sold. I assume some kind of CASE statement can be used to generate this.
So the query needs to show Item No, Item Description, Current quantity in stock, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for all items within a given date range.
I hope you can assist me with this problem.
Thanks
Grant.

Hi,
Thanks Gordon that was exactly what I needed.
I've been trying to add some additional columns to the query but I'm experiencing some errors and I can't quite tell why.
Basically, here's the code from another working query I have which I wish to merge into the query you've suggested above:
SELECT T0.[ItemCode],
T0.[ItemName],
T3.[ItmsGrpNam],
T4.[Name] AS [Sub-Category],
T5.[Name] AS [Sub-Sub-Category],
T0.[CardCode] AS [Pref Supplier],
T6.[FirmName] AS [Brand],
T0.[U_Range],
T0.[OnHand],
CASE WHEN T0.[StockValue] = 0 THEN 0 ELSE T0.[StockValue] END AS [StockValue],
T1.[Price] AS [PBK GBP Price],
CASE WHEN T0.[OnHand] = 0 THEN T0.[LastPurPrc] ELSE T0.[StockValue]/T0.[OnHand] END AS [Ave Cost],
CASE WHEN T0.[OnHand] = 0 THEN T1.[Price]-T0.[LastPurPrc] ELSE CASE WHEN T0.[OnHand] > 0 THEN T1.[Price]-T0.[StockValue]/T0.[OnHand] END END AS [Margin],
CASE WHEN T0.[OnHand] = 0 AND T0.[LastPurPrc] = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] > 0 AND (T0.[StockValue]/T0.[OnHand]) = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] = 0 THEN (T1.[Price]-T0.[LastPurPrc])/T1.[Price]*100 ELSE CASE WHEN T0.[OnHand] > 0 THEN (T1.[Price]-T0.[StockValue]/T0.[OnHand])/T1.[Price]*100 END END END END AS [Margin %],
T0.[LastPurPrc]
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[ITM1] T1 ON T0.ItemCode = T1.ItemCode INNER JOIN [dbo].[OITB] T3 ON T0.ItmsGrpCod = T3.ItmsGrpCod LEFT OUTER JOIN [dbo].[@U_SUBCATEGORY] T4 ON T0.U_Subcategory = T4.Code LEFT OUTER JOIN [dbo].[@U_SUBSUBCATEGORY] T5 ON T0.U_SubSubCategory = T5.Code INNER JOIN OMRC T6 ON T0.FirmCode = T6.FirmCode
WHERE T0.[OnHand] >= 0 and T0.U_Range not in ('E','X')
ORDER BY T0.[ItemCode]
Essentially I just wish to add the fields which are specified in the query above, but not in the query you've already suggested:
SELECT T0.ItemCode,
Max(T0.ItemName),
Max(IsNull(T0.OnHand,0)) 'In Stock',
SUM(IsNull(T1.Quantity,0)) 'Quantity',
Sum(IsNull(T1.LineTotal,0)) 'Sales Amt',
SUM(IsNull(T1.GrssProfit,0)) 'Gross Profit',
Case WHEN Sum(Isnull(T1.LineTotal,0)) = 0 THEN 0 ELSE
SUM(IsNUll(T1.GrssProfit,0))/Sum(Isnull(T1.LineTotal,0)) * 100 END 'Gross Profit %'
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode=T0.ItemCode
LEFT JOIN dbo.OINV T2 ON T2.DocEntry=T1.DocEntry AND T2.DocDate Between [%0] AND [%1]
GROUP BY T0.ItemCode
I was hoping it would be fairly straight forward but so far I've had limited success.
What am I missing here?
Thanks in advance!

Sales Analysis Report Problem

Hi all.
I would be glad if I could get a response for this question from someone at SAP. Though all responses are very welcome.
There seems to be an error on the Sales Analysis report. The report runs fine with selection criteria for Customers and Sales Employees but when you run it with the Items Selection Criteria it returns the correct rows but wrong amounts in the Gross Profit and Gross Profit % columns which also means that the totals are also wrong.
I have tried to follow the issue but everything seems to be OK.
My last resolution is that there may be something wrong with the stored proc that B1 runs to produce this report.
Please help! Urgent.

Wilfred,
You should create a message with SAP Support on this issue.
Eddy

Ad hoc Risk Analysis report is returning incorrect Risk Level for some Risks

We are running GRC AC 10.0 with SP 16. After application of Support Pack 16, some of our ad hoc risk analysis reports are returning incorrect risk levels. For example: Risk F024 Open closed periods and inappropriately post currency or tax entries is set as High. When the Ad hoc report is run, the risk F024 will show on a user with a level of Medium. We have generated our ruleset and have followed the normal procedures used to implement the support pack. Any ideas what is causing this issue? I have exhausted my knowledge and search attempts.
Any help is appreciated.
Sara B.

Hi Kevin
Many thanks for your post, we did run a full BRA but no luck unfortunately. Some Risks still reporting as Medium when they should be Critical or High. Oddly it is reporting correctly against some risks just not for all!
Cheers
Hussain

Stage analysis

Hi all!
Can you explain for me about 2 colume in Stage Analysis ( Sale opportunity)
The first colume : Actual%:
The second colume: Lead in stage:
I have read hepl of SAP b1, but i still understand. Help me, please.

NO, i will show the report Stage Analysis of Sale Opportunity module:
Stage     Defined % Actual % Lead in stage
A           5        7            14
B           10       2            12
Sometime the report show as
Stage     Defined % Actual % Lead in stage
A           5       100          14
B           10      100           12
Please, explain 2 colume Actual % and Lead in stage.

Q:- Migrating version 6 Web Analysis reports directly to version 11 ??

Trying to migrate version 6 Web Analysis reports directly to version 11.1.1.2 without first migrating to version 9, because of some time constraints.
Overall it works fine, except for some issue with PV (Personal Variables) in those reports.
The PVs are present in the version 6 xml export file, but somehow not being picked up in version 11.1.1.2 Web Analysis import.
Has anyone tried to migrate version 6 Web Analysis reports to version 11.1.1.2 and faced this kind of issue?
I am wondering if there is any change in the xml tags because of which the migration from 6 to 11 is not working.
Anyone has any thoughts or ideas to quickly migrate web Analysis reports from 6 to 11. There are hundreds of reports that need to be migrated.
- Nasar

Hi,
Welcome to Forums...!
I think we need to change the database connection details in the Web analysis.
goto file --> Edit --> browse the database connection then change the server name in the connection details.
may be this will help to resolve your issue.
Thanks,
mady

Stage Analysis Report Issue

Similar Messages

Maybe you are looking for