Stage transparency in edge not working with dps

I try to make the stage transparency in edge, add some object with motion on that file, then paste it as a oam file into indesign for dps use. I try the way that discussed in http://forums.adobe.com/message/4401867, when preview in desktop, everything including the transparancy looks ok(except the circle object becomes a rectangle), but in a real ipad, the transparancy stage become a white box, I know it may have something to do with the poster image, so I use photoshop to change that poster image into a totally transparancy png file, still don't work at all. Somebody help me.

Hi,
I have the same problem:
InDesign CS6 with newest updates
Folio Set to Automatically
Viewer Version set to 23
Adobe Edge Animate OAM-Packages have no transparency, they have a grey background when I place them in a Folio within InDesign which is set to "AUTOMATICALLY".
When I import the Animation as a WebContent it is fine.
The screenshot shows the differences:
Screenshot from Content Viewer on Windows. On the iPad the animation isnt shown at all, I dont know why..

Similar Messages

Edge animation not working with DPS - anyone know?

Hey y'all I am Having a hard time making simple animation work on the DPS platform from EDGE (1.5) and show it on IPAD
anyone knows issues about it?

Here is the link to create the animation for DPS through Edge.
http://www.adobe.com/devnet/digitalpublishingsuite/articles/enhancing-your-dps-folios-with -edge-animations.html
Thanks
Harshit yadav

Transparent Background is not working with Vmode Transparent

Here is my test page
I imported a video into flash and have a transparent photoshop layer to create an iPod skin. The video works fine, but I cannot get the "stage" to be transparent so that you do not see the flash background color behind the iPod skin.
I've read in the forums and have followed the instructions here from Adobe.
If you look at my code, I have
<param name="vmode" value="transparent" />
and
vmode="transparent" in the embed tag.
If I change the color of the stage in flash, the background color does change so I know that the flash movie is seeing the transparency around the outside of the iPod skin.
Any ideas why this isn't working?

You're welcome. It is not out of the ordinary to find examples of code that were made available but never tested to find they had errors. Some folks are too anxious (or something?) and publish mistakes.

[rxvt-unicode]pseudo-transparency not working with Awesome WM (solved)

Hi all,
first of all, let me tell you that I googled about this problem, I read the Archwiki, the rxvt FAQ and several threads in multiple forums but nothing that I found actually worked.
I'm using Awesome WM and OpenBox and my rxvt is the standard rxvt-unicode from the repos.
Since an update, rxvt is not transparent anymore (I was using pseudo-transparency). Actually, transparency works with OpenBox but it does not work with Awesome WM. I find it very weird.
I tried increasing the shading value in .Xdefaults as suggested in an other thread in this form but it did not help at all. I thought the problem was that I needed libafterimage so I installed it but then, how to use it?
Does someone have any idea about this? I'd be very thankfull!
Last edited by Sherwood51 (2011-01-18 17:04:37)

And how exactly did you get it to work with feh ? I keep failing to get pseudo-transparency.
My theme.lua has this:
awsetbg -f -u feh path/to/wallpaper
and I also tried this:
feh --bg-scale path/to/wallpaper
and in Xdefaults:
URxvt*background 0
URxvt*depth 24 ( doesn't work with 32 either )
URxvt*inheritPixmap true
URxvt*transparent true
EDIT:
I got cairo working ( finally ), so I have true transparency, so don't mind my post.
Last edited by Varg (2011-01-19 21:08:33)

HP Simple Pass not working with Microsoft Edge in Windows 10

I up graded to windows 10 and now I find that HP Simple Pass does not work with Microsoft Edge, despite the fact that it continues to work with the windows 10 sign in.Would appreciate any thoughts on how to fix HP Simple Pass to work with Microsoft Edge. Thank you

I got an answer here:http://h30492.www3.hp.com/t5/Notebook-Betriebssysteme-und-Software/SimplePass-und-Edge/m-p/363610#M34997 Edge doesn't support that kind of plugins at the moment, MS is working on it.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Lync 2013 /w Edge not working properly (internal/external same domain name and all "external" users"

Hi,
I've got some issues with a Lync 2013 setup.
The config consists of 2 lync servers. One FE and one Edge. All seems to work except audio in meetings and Sip.
The setup is like this (fake ip's used):
Front End:
Internal IP: 172.16.0.10
External IP: x.x.185.10
All ports open in Cisco ASA
internal AD DNS: dialin/lync/meet/lyncdiscover to Front end internal ip. edge/lsedge/sip points to edge internal ip
EDGE:
Interal IP: 172.16.0.11 (no gateway configured)
External IPS: x.x.185.11, x.x.185.12, x.x.185.13
All external IP's are direct internet facing, no NAT (a firewall is in place).
All external interfaces are using a wildcard certificate.
All server are running in a remote data center, so basically no internal users. We all connect to the external interfaces. The Windows domain name (AD) is the same as our External DNS (companyname.com).
Autodiscover works, we can logon, chat but there is no audio. The audio test failes. Also SIP is not working with a sip trunk.
External DNS: sip/webconf/av are pointing to their external ip's. sipexternal is a cname to sip. lyncdiscover/lync/dialin/meet all point to the Frond end External ip.
_sip._tls/_sipfederationtls.tcp/_xmpp-server.tcp all point to the sip.companyname.com ip.
I just can't figure out what is wrong.

@PSingh123 I'll try the logs in a minute and get back with the results.
@PaulB_NZ Thanks for the input. In my opinion the FE does need an external IP. How else will you be able to connect if you are a remote worker?
The Edge is (asfar as i know) needed for Enterprise voice and Federation with other (external) sip domains. It's not needed for basic (chat/video/whiteboard etc) Lync functionality for both internal and external (remote) users.
The Edge is to communicate with services/users outside the origanisation.
I do still think that the basic topology (FE with internal IP and Nat'ed external ip working with an Edge with internal IP and 1 external IP nat'ed to 3 DMZ ip's) is correct in this case.
I can be wrong and in that case would like to be pointed to the correct configuration.
75
Points
Top 15
PSingh123
Partner
Joined Jun 2007
9
PSingh123's threads
Show activity

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

X11 on Leopard not working with two screens.

I have two screens on my Mac Pro and just upgraded to Leopard. X11 starts up on the main screen and any new X11 windows start up on that screen, which is fine, but then the window can not be moved to the other screen.
The window will overhang onto the second screen, but as you drag it over the window stops moving at the point that the mouse cursor reaches the edge of the main screen. The mouse cursor keeps going but the window stops.
Even if you then click on the portion of the window that is on the second screen, you can not then drag it the rest of the way into the second screen.
In Panther and Tiger I was able to move windows to the second screen.
Message was edited by: scm2000

I have also found that X11 does not work with 2 or more screens. I can not drag an X-Window to the 2nd screen at work (well maybe a few pixels onto the 2nd screen, that is all).
And I can not use the -geometry option on X-Windows based applications to position an X-Window onto the 2nd screen, it always ends up on the screen with the Menu Bar.
And this worked so wonderfully on Panther and Tiger.
I use my PowerMac G5 with dual 18" monitors at work. I develop kernel level software for Linux and Windows. I'm using X11 all day long when working with Linux systems both local and 2000 miles away (work has some nice in house bandwidth).
Being restricted to just a single monitor is a major limitation for my job. Having Mac OS X X11 support made it practical for me to use my Mac at work. Otherwise, I would have been forced to use a Windows box.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Application is not working with mouse

Dear All,
We have a strange issue in the our application (Oracle form) in the one of our client machine.
Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
Our Applications server is in Other country and client are accessing from India.
This occurs for some user and not for all.
Application server Version 10.1.2.0.2.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Java Plug-in version 1.6.0_31 .
Please any info will help us lot.

Thank you for the quick replies Michael Ferrante and HamidHelal.
But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
Even the java control panel is not working with mouse.
For other country customers everything working fine.
So its difficult for me to apply the patch with these uncertainties.
Checking with fresh java installation and let you know the status.
Thanks.

Voice Memo is not working with iOS 8.2

Voice Memo Records is not working with iOS 8.2. how to fix it?

Voice Memo Records is not working with iOS 8.2. how to fix it?

Stage transparency in edge not working with dps

Similar Messages

Maybe you are looking for