StageVideo play multiple videos in sequence (playlist) on iOS

Hi everyone!
I have to play severals locals videos in sequence with stageVideo (imagine an dynamic background wich runs an playlist).
Its runs very well (the MP4 videos play smoothly) but when the videos are switching appear an full sreen white frame for 3 seconds and later the second video start to play (on my iPhone4).
private function netStreamStatus(event:NetStatusEvent):void{
         if (event.info.code == "NetStream.Play.Stop"){
                 netStream.play(VIDEO2)
If i rewind the first video (loop) the white frame never appear:
private function netStreamStatus(event:NetStatusEvent):void{
           if (event.info.code == "NetStream.Play.Stop"){
                 netStream.seek(0)
¿How can i do an smooth video change with an stageVideo and ios devices?
Thanks a lot!

Here i attach an FXP project (Flex 4.6 Mobile APP) wich play some videos with stageVideo.
You can see in a real device like iPhone 4 (not desktop) an BLACK screen when swtiching videos (about 3 seconds).
Can anyone helpme please?
Thanks a lot!
http://goo.gl/75tBz

Similar Messages

Playing multiple videos in sequence

Hello all. I'm a complete newbie to Flash development, but
have been thrown into it with not just a deadline, but a (to me)
"complex" project. I have a Flash project which currently opens and
plays a video as part of whats on "the stage". I now need to add 2
more videos which will play, in sequence, after the first one
finishes. I've gone through the tutorials, read the help files, and
now I'm just feeling a bit "DUH" because I still can't figure out
how to do this. Anybody out there care to help a poor ol' graphics
guy avoid the bitter wrath of his boss?

A single instance of FLVPlayback can handle multiple videos.
I can't remember what the upper limit is. So you can switch between
them based on user input. But I believe it can only ever play one
at any one time. I've used FLVPlayback quite a lot but not for what
you're describing, so can't answer from direct experience.
Check out this page, and the trivial example at the end
(whether its streaming or progressive is irrelevant here, streaming
should work just as well, but perhaps you need to use SMIL files
for the streaming contentPath?)
http://livedocs.adobe.com/flash/9.0/main/00002980.html#wp3780233

Play multiple videos in sequence

Hi,
I've multiple videos stored in FMS and would like to merge them into a single video object in order to play all of them in sequence (so that a user thinks it's a single longer video). Is it possible?

This is a link from 3.5 but have you tried this:
http://www.overdigital.com/2009/08/02/flash-media-server-as-video-editingstitching-tool/

Snow Leopard iTunes 10.5 will not play multiple video tracks in QuickTime .MOV files

I recently discovered that Snow Leopard iTunes version 10.5 won't play multiple video tracks in a QuickTime .MOV file.
Both video tracks appear and play correctly when playing the file in:
- QuickTime Player 10 or QuickTime Player 7.7 on the same Snow Leopard machine
- iTunes 10.3.1 on another Snow Leopard machine
- iTunes 10.5 on Leopard or Windows 7
So I think the problem is iTunes 10.5 on Snow Leopard (although I haven't been able to test iTunes 10.4).
First test file is two 640x480 video tracks side-by-side (total dimensions 1280x480):
http://160.94.17.23/demo/two-video-tracks-1280x480.mov
All I see is the first (left) video track, and not the right one. iTunes "Get Info" command incorrectly reports the video dimensions of the file as 640x480.
Second test file is two 640x480 video tracks played one after another (duration of 10 seconds each):
http://160.94.17.23/demo/two-video-tracks-640x480.mov
All I see is the first video track, and although it reports the correct file duration (20 seconds), the second video track never appears -- it simply freezes on the final frame of the first video track for the last 10 seconds.
Anyone else see similar behavior? Unless I'm missing something, I suppose I should submit this as a bug to Apple.

I have the same problem, i tried re-installing, converting it to AVC H264 but none seems to work so far

Using ControlBarSample to Play Multiple Videos

I'm trying to modify the ControlBarSample to play multiple videos and I'm running into a wall. I've made a few simple modifications to the control bar sample to try to play a second video file. The problem I'm having is the control bar doesn't have a reference to the new video I play and therefore can't update it's view. I'd like to be able to remove the video element playing in the ParallelElement and add a new child MediaElement and have the controlbar refresh it's reference to the new target. Also the controlbar shouldn't have to reload itself, but should stay right where it is in the display list and in the root parallel element. Can someone guide through this? Here is my simple modification to the ControlBarSample class as a starting point.
package
     import flash.display.Sprite;
     import flash.events.MouseEvent;
     import flash.text.TextField;
     import org.osmf.elements.ParallelElement;
     import org.osmf.events.MediaFactoryEvent;
     import org.osmf.layout.HorizontalAlign;
     import org.osmf.layout.LayoutMetadata;
     import org.osmf.layout.VerticalAlign;
     import org.osmf.media.*;
     import org.osmf.metadata.Metadata;
     [SWF(width="640", height="360", backgroundColor="0x000000",frameRate="25")]
     public class ControlBarPluginSampleMod extends Sprite
          public function ControlBarPluginSampleMod()
               // Construct an OSMFConfiguration helper class:
               osmf = new OSMFConfiguration();
               // Construct the main element to play back. This will be a
               // parallel element, that will hold the main content to
               // playback, and the control bar (from a plug-in) as its
               // children:
               osmf.mediaElement = constructRootElement();
               osmf.view = this;
               // Add event listeners to the plug-in manager so we'll get
               // a heads-up when the control bar plug-in finishes loading:
               osmf.factory.addEventListener(MediaFactoryEvent.PLUGIN_LOAD, onPluginLoaded);
               osmf.factory.addEventListener(MediaFactoryEvent.PLUGIN_LOAD_ERROR, onPluginLoadError);
               // Ask the plug-in manager to load the control bar plug-in:
               osmf.factory.loadPlugin(pluginResource);
               // button to play the next item
               var label:TextField = new TextField();
               label.text = "PLAY NEXT";
               label.x = 10;
               label.y = 3;
               label.mouseEnabled = false
               button = new Sprite();
               button.buttonMode = true;
               button.addChild( label );
               button.graphics.beginFill(0x00FFFF,1);
               button.graphics.drawRect(0,0,90,20);
               button.addEventListener(MouseEvent.CLICK, onButtonClick);
               addChild(button);
          // Internals
          private var osmf:OSMFConfiguration;
          private var rootElement:ParallelElement;
          private var button:Sprite;
          private function onPluginLoaded(event:MediaFactoryEvent):void
               // The plugin loaded successfully. We can now construct a control
               // bar media element, and add it as a child to the root parallel
               // element:
               rootElement.addChild(constructControlBarElement());
          private function onPluginLoadError(event:MediaFactoryEvent):void
               trace("ERROR: the control bar plugin failed to load.");
          private function constructRootElement():MediaElement
               // Construct a parallel media element to hold the main content,
               // and later on, the control bar.
               rootElement = new ParallelElement();
               rootElement.addChild( constructVideoElement(VIDEO_HTTP) );
               // Use the layout api to set the parallel element's width and
               // height. Make it as big as the stage currently is:
               var rootElementLayout:LayoutMetadata = new LayoutMetadata();
               rootElement.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, rootElementLayout);
               rootElementLayout.width = stage.stageWidth;
               rootElementLayout.height = stage.stageHeight;
               return rootElement;
          private function constructVideoElement(url:String):MediaElement
               // Construct a metadata object that we can append to the video's collection
               // of metadata. The control bar plug-in will use the metadata to identify
               // the video element as its target:
               var controlBarTarget:Metadata = new Metadata();
               controlBarTarget.addValue(ID, "mainContent");
               // Construct a video element:
               var video:MediaElement = osmf.factory.createMediaElement(new URLResource(url));
               // Add the metadata to the video's metadata:
               video.addMetadata(ControlBarPlugin.NS_CONTROL_BAR_TARGET, controlBarTarget);
               return video;
          private function constructControlBarElement():MediaElement
               // Construct a metadata object that we'll send to the media factory on
               // requesting a control bar element to be instantiated. The factory
               // will use it to parameterize the element. Specifically, the ID field
               // will tell the plug-in what the ID of the content it should control
               // is:
               var controlBarSettings:Metadata = new Metadata();
               controlBarSettings.addValue(ID, "mainContent");
               // Add the metadata to an otherwise empty media resource object:
               var resource:MediaResourceBase = new MediaResourceBase();
               resource.addMetadataValue(ControlBarPlugin.NS_CONTROL_BAR_SETTINGS, controlBarSettings);
               // Request the media factory to construct a control bar element. The
               // factory will infer a control bar element is requested by inspecting
               // the resource's metadata (and encountering a metadata object of namespace
               // NS_CONTROL_BAR_SETTINGS there):
               var controlBar:MediaElement = osmf.factory.createMediaElement(resource);
               // Set some layout properties on the control bar. Specifically, have it
               // appear at the bottom of the parallel element, horizontally centererd:
               var layout:LayoutMetadata = controlBar.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE) as LayoutMetadata;
               if (layout == null)
                    layout = new LayoutMetadata();
                    controlBar.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout);
               layout.verticalAlign = VerticalAlign.BOTTOM;
               layout.horizontalAlign = HorizontalAlign.CENTER;
               // Make sure that the element shows over the video: element's with a
               // higher order number set are placed higher in the display list:
               layout.index = 1;
               return controlBar;
          private function onButtonClick(event:MouseEvent):void
               playNext(VIDEO_RTMP);
          private function playNext(url:String):void
               rootElement.removeChildAt(0);
               rootElement.addChild( constructVideoElement(url) );
          /* static */
          private static const VIDEO_HTTP:String = "http://mediapm.edgesuite.net/osmf/content/test/logo_animated.flv";
          private static const VIDEO_RTMP:String = "rtmp://cp67126.edgefcs.net/ondemand/mediapm/strobe/content/test/SpaceAloneHD_sounas_640_500_short";
          private static var ID:String = "ID";
          // Comment out to load the plug-in for a SWF (instead of using static linking, for testing):
          //private static const pluginResource:URLResource = new URLResource("http://mediapm.edgesuite.net/osmf/swf/ControlBarPlugin.swf");
          private static const pluginResource:PluginInfoResource = new PluginInfoResource(new ControlBarPlugin().pluginInfo);

It appears that this may be accomplished more easily if I do something similar to the StrobeMediaPlayback implementation. Looking at the StrobeMediaPlayback source code it looks like Adobe has done something a little different than their ControlBarPlugin, placing the controlbar and root media element inside separate MediaContainers and then adding those containers to the display list. Is this recommended over using the frameworks ParallelElements? If so, is communication between the control bar and root media element still a matter of just updating the target reference via metadata?

What is good practice for playing multiple video's in a single swf?

Hello,
I have build in the past a video wall with video's inside. After building this i came across some problems.
If you have too many video players loading at once it takes a lot of processing and the tweens in the
page while loading the video's where not moving fluidly, but more in a stuttering way.
After lot's of test i found a good working solution. I imported the flv video's into flash en exported them on the timeline
as a embedded swf. Then i externally loaded these swf files and that performed much better.
Is it even good practice to load multiple video instances at once? I used this time the LoaderMax of greensock but the video's
only play after it's completely loaded. I would like to find a way to progressive play all video's at.
Does someone has experience with this?
Regards,
Chris.

How about an XML file which supplies the title for each movie and the location or source of the video to be played? Simple version below.
<?xml version="1.0" ?>
- <playlist>
<video src="Gfx/video/Alex1.f4v" title="John Deere 330" />
<video src="Gfx/video/Benni1.f4v" title="Hitachi Z240F" />
<video src="Gfx/video/Scotti1.f4v" title="Hitachi Z350F" />
<video src="Gfx/video/Scotti2.f4v" title="Hitachi Z350F" />
</playlist>
JR

Bug in playing back video podcasts from playlists?

I subscribe to about 2 dozen podcasts, a few of which are video podcasts. I have a smart playlist that collects all the podcasts together, based an their Album name. I have a second smart playlist that collects all unplayed & unrated members of the first podcast playlist.
I have my Nano set to autosync the second smart playlist. If I navigate to this playlist (via main menu->Music->Playlists)I can see the video podcast titles listed there, see the little TV symbol next to them signifying they're video, but when I try playing them, I see a single frozen video frame, and the audio plays. Rotating the Nano to landscape mode doesn't make a difference. It happens on all my video podcasts.
But when I play the video podcast via main menu->Podcast (enabled via Settings->General->Main Menu), it'll play normally.
Has anyone else run into this bug? Anyone able to play video podcasts via the Music->Playlist?

This is a serious bug. I was puzzled how to play the video podcasts which were put in a playlist using the same method as yours: 1st Smartlist collects all podcasts, and the second one collects the unplayed ones. Then I synch the second smart play list. No matter what I do, I cant see the video. However thanks to your post, I now know I can see it via the much more "normal" route of selecting podcasts from the main menu.

2.0 - Can you play Music Videos in a playlist one after another

I'm at work and unable to test. Does the "new" Take2 finally allow users to create their own MTV?

I'm equally disappointed/frustrated. We bought three of these to play easily-updatable video presentations, announcement clips and short films for my church. But it simply won't work for that purpose. Apple TV plays one video, then back to the menu. There's still no way to play any sort of multiple videos in succession, and that just seems ridiculous to me!
There are actually people who take the time to reply to (the many) threads like this one with, "Well, Apple didn't advertise it with that functionality". Wow - that's true, I guess, but when something's a no-brainer, it's a... oh, never mind.
The kiosk market, music video playback, successive short films or home videos shown for parties. Apple has really missed the mark on this. It's a real shame for an otherwise great product.
I guess onto eBay go three Apple TVs.

I use to be able to play my videos in my playlist on my itouch

i use to be able to play my videos on my itouch i had on my itunes playlist need help

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Can't play music videos in sequence

I have about 10 - 12 music videos on my iMac, all of which were downloaded from iTunes.
I can only play one video on the AppleTV and then it stops. Is there a way to play iTunes music videos on my AppleTV in either shuffle or sequence? After one video plays it does not advance to the next video. I have syched the videos to my AppleTV.
Thank you.
Message was edited by: Doug Campbell

If Apple would fix this so the music videos would all play one after another, this would be such a much needed enhancement, as I have really enjoyed this device. Keeping my fingers crossed for 2008...

Playing multiple videos in single FLV instance.

Hi, I'm trying to get a video application to work. The basic
question I have is: can i get multiple videos on a flash streaming
server to play in a single FLVPlayback instance? (I want the user
to be able to choose the video based on a button, not play in
succession.) Or do I have to set up a custom player using
NetConnection and NetStream classes along with the
NetStream.play(vidname) method ?
I really need to be pointed in the right direction on this
because the project is due asap.
Thanks!!!

A single instance of FLVPlayback can handle multiple videos.
I can't remember what the upper limit is. So you can switch between
them based on user input. But I believe it can only ever play one
at any one time. I've used FLVPlayback quite a lot but not for what
you're describing, so can't answer from direct experience.
Check out this page, and the trivial example at the end
(whether its streaming or progressive is irrelevant here, streaming
should work just as well, but perhaps you need to use SMIL files
for the streaming contentPath?)
http://livedocs.adobe.com/flash/9.0/main/00002980.html#wp3780233

Quicktime playing multiple videos question

Hello Everyone.
This is probably more of a html/java/flash based question but I thought I would start here as it revolves around the QT Player.
I have a webpage
http://www.drewwfilms.com/Temp/Ket/KetWedding.html
On this page is the QT Player.
Beneath the player are 3 buttons. When a viewer clicks one of those buttons I want it to load the respective video related to that button into the player without the browser loading a new page. Is this possible?
Can someone steer me the right direction? Or help me out? I'm not even sure how to google search this. I tried Multiple Videos, 1 QT player Web - and I didn't get anything that helped.
Thanks!

I've been having this truly obnoxious problem ever since I installed Lion. Whenever I open a Quicktime video or a preview jpeg (and sometimes a Word document) - the last two or three documents I've viewed in these programs also open.
This is the normal default mode for Lion which now "remembers" what documents (files, movies, images, etc) were opn when you last "Quit" each application. Either learn to close the documents before "quitting" the app or turn this feature off. (I.e., deselect the "System Preferences > Personal > General > Restore windows when quitting and re-opening apps" option.)

Playing multiple videos on the same page in Dreamweaver CS4?

Suppose on my website, I have a few dozen videos, all of them embedded YouTube videos. When the user goes to the page, Video 1 is up and ready to be played. Below Video 1 is a list of the other videos (Video 2, Video 3, and so on), each with a thumbnail picture. When the user clicks this thumbnail page, the new video is loaded (eg: if they click on the thumbnail for Video 2, Video 2 is up and ready to be played).
What do I do in Dreamweaver CS4 so the new video loads without redirecting the user to another page? With so many videos, I imagine that it isn't efficient to have a separate page for each video.

Hi
You can do this by using an xml playlist for your videos, (do a search for "creating flash xml playlists").
PZ

Is it possible to play multiple videos in sync?

I need to build a website which shows multiple instruments in a band, being played in sync. Each camera/video block is a different instrument, and played together, they constitute an entire band. I have been searching high and low for ways to do this, and it definitely appears that HTML5 is out. It looks like standard FLV progressive download is out, too, because it's impossible to get 4-8 videos to sync perfectly.
I see on the FMS page that it has some abilities in synching. How would one (conceptually) go about making a webpage where say 4-8 videos begin to buffer, then when ready, play in sync? And they would also need to, when the location is changed, all sync to that location and rebuffer.
The objective is so that the user can mute/solo each video's audio, to remove an instrument(s) from the "mix" at any time.
An alternative way of doing this, I think, would be to just put the 4-8 videos together in video editing, and encode this into one video, but have each video's audio track be a separate audio channel. If FMS can do multichannel audio on one video, this might work, if it could mix them in/out individually, as the user requires.
Any insights on this problem would be greatly, greatly appreciated.
Thanks!

sandyaudiovisual,
Very good point. I was, in a way, asking both.
Yes, it appears that actually streaming multiple streams of video while visibly playing in synchronization simultaneously will be very difficult.
So, I was thinking that as an alternative, I could pre-mix the multiple "streams" of video into just one video. E.g., a single video file, with for example five squares each with a different video inside of it. So to the view, in a sense, it looks like five streaming videos in sync.
What I would then want to do, in that situation, is be able to mute/solo an audio track associated with each "video". In reality, it would be a single video channel, with five audio channels, switchable while maintaining synchronicity. Though the extra wiggle is that rather than simply switching between 1 and 5, it would be preferable to actually mix in/out channels 1-5, so that at any time, 1, 2, 3, 4, or 5 audio channels would be playing, in synchronicity, and could be muted/soloed.
To give a visual idea, there would likely be a mute and solo button composited on top of each "video" box inside the main video.
It would be easier if we could actually stream five separate video files and have them be in sync, with all stopping to wait should one need to rebuffer, and all sharing the same transport controls, because then if we want to swap out one video, we just swap that file, rather than remake the entire file in Final Cut or whatever. But this is sounding less and less possible.

Can't play multiple videos

Hi All
I am hoping someone can help, doesn't matter what I do I cannot get the IPOD to play more than one video at once. Is there a way of getting it to automatically move to the next video after it finishes the one it was playing?

I'm having the same issue. I created a playlist in iTunes, called it Music Videos and set it to "music videos" in the option menu in iTunes but when I play the playlist it will play only one music video and when it's finished just stays there. It doesn't return to the Video Playlist menu it just remains at the end of the video.
Anyone worked out how to fix this?

StageVideo play multiple videos in sequence (playlist) on iOS

Similar Messages

Maybe you are looking for