Staging db and consistency issues

Hi
I have a scenario for my application. The source for my application is in several external DBs. What I have in mind is to use DB mirroring as a staging database and perform the sync at the end of each day. But the problem is that both sides are in change
during the day and they might be in different states from the their initial state. how can I solve my problem without major loss in applications' functionality ?
I have placed my scnerio picture in here: http:// snag .gy/U8pHI.jpg
Thanks in advance

Hi
You cannot Implement Database Mirroring in Scenario  Since the Data is going to Change on Both Ends.
 - On DB Mirroring the Target/mirror DB will in No Recovery Mode you cannot use that.
 - You use your mirroring Copy only for Reporting purpose by taking Mirror Database Snapshot's
In your Case instead of Mirroring you can Opt for "Merge Replication"  
http://msdn.microsoft.com/en-us/library/ms152746.aspx
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::

Similar Messages

  • New Airport Extreme and iPhone Issues

    I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
    So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....    
    Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
    Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
    So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
    Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

    I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
    Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
    Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

  • Logical Standby Data Consistency issues

    Hi all,
    We have been running a logical standby instance for about three weeks now. Both our primary and logical are 11g (11.1.0.7) databases running on Sun Solaris.
    We have off-loaded our Discoverer reporting to the logical standby.
    About three days ago, we started getting the following error message (initially for three tables, but from this morning on a whole lot more)
    ORA-26787: The row with key (<coulmn>) = (<value>) does not exist in table <schema>.<table>
    This error implies that we have data consistency issues between our primary and logical standby databases, but we find that hard to believe
    because the "data guard" status is set to "standby", implying that schemas' being replicated by data guard are not available for user modification.
    any assistance in this regard would be greatly appreciated.
    thanks
    Mel

    It is a bug : Bug 10302680 . Apply the corresponding Patch 10302680 to your standby db.

  • Staging area and target area

    hi..friends.
    should staging area and target area be same or different???
    if same what are the advantages and dis-advantages???
    and if not same what are the advantages and dis-advantages????
    I want your help..
    Thanks.

    Staging area is the place where transformation takes place.
    Basically c$,I$ tables gets created at this place and once processing is done , the same gets dropped .
    By defalut staging area and traget area are the same . But most of the DBA does not like to have the temp tables created at the target as this cause dbms performance, maintance issue in long term.
    Instead you can have a dedicated schema created just for staging and use the same in your interface.
    Plus when your target is non dbms then you need to go for a dedicated staging area which can be a separate schema in your database or it could be in memory schema. You will find performance issue if you are using in memory schema as your staging area in case the data volume increase.
    Thanks,
    Sutirtha

  • Mail attachment drag and drop issue

    Been facing serious mail attachment drag-and-drop issue since 10.8 (if not from 10.7) and was disappointed to find the same behaviour still in 10.9.
    When I drag and drop a picture file (from Finder for example) into a message window or onto the Mail.app Dock icon, the system's window management somehow gets confused: my next step is to click on the message window in order to start typing. However, the mouse click causes that very window to escape under all other open applications / windows. Further on, I dig under to find the escapee and click again: once more it escapes. This can go on for a few annoying rounds until gets solved in an unexplainable way. This behaviour in not consistent, but has happens in about 8 cases out of 10.
    Apart from Mail.app I do not experience drag and drop issues of any kind.
    Anyone else suffering from this?

    I'd be interested in the answer to this too.
    It only just started happening to me a day or so ago, about the time that I think I did an OS upgrade.
    I'm on OSX 10.8.2.
    Its annoying.
    I can drop and drag in Finder but it just affects email.

  • Automatically determine the staging area and door

    Hello Gurus,
            How to automatically determine the staging area and door ? and where to configure it?
    thanks very much!

    Hi zhang
    Material staging areas and doors are related to Warehouse management.
    First of all assign WM to your storage location
    Doors
    This is the place where the goods come to the warehouse  or  leave  from the warehouse
    The use of doors is to pick and  putaway  process in the warehouse.
    You can also assign the doors to the staging areas as goods receiving and shipping points
    Material staging areas
    This is an organizational unit that is assigned to the warehouse number. It is used to organize the goods flow in the warehouse
    The use of the material staging areas is that , they are used for interim storage of goods in the warehouse
    Staging areas can be defined for other purposes like goods receipt and goods issues
    Regards
    Srinath

  • Calendar Consistency Issues

    We've begun seeing some calendar consistency issues on iPad devices. We are using an Exchange 2007 "back end", most of the users are using Outlook in cached mode on their desktop, and many will have another mobile device of one type or another. The consistency issues are appointments appearing in Outlook or being accepted in Outlook and not showing up on the iPad device. Every hardware vendor we've spoken with, including Microsoft, and RIM have emphasized the client/device side and implementing "best practives" such as the following:
    -minimizing number of instances of mail clients running against mailbox
    -minimizing delegates
    -having only 1 person notified of appointment
    -avoiding forwarding appointments
    -deleting changed recurring appt's rather than changing them
    -not accepting appointments from mobile device
    -running Outlook in online as opposed to cached mode where possible
    I'm hoping someone out there has found a "silver bullet" that goes beyond the suggestions we've gotten which are listed above. The problem is our high profile users that have the devices don't want to be told it's their behavior that's causing the problem!!!
    I appreciate in advance any ideas.

    Same thing happening on my iMac.  Can't do much on the computer.

  • Database consistency issue..

    Hi.
    SCCM 2012 English, RTM
    For unknown reason the DR link broke between CA and primary.
    It says Site Replication status both way Active, but data replication is mixed. Parent to child Global data - failed and child to parent site data failed. Child to parent global - Active. Replication link analyzer performs several checks and then informs
    - Database consistency issues detected for site XXX.   (parent). Skiping rule  - shows different replication groups which are failed. I tried to replicate those, but nothing changed.(according to following article last step)
    http://blogs.msdn.com/b/minfangl/archive/2012/05/16/tips-for-troubleshooting-sc-2012-configuration-manager-data-replication-service-drs.aspx
    Any more ideas?

    Now i have read more about DRS and SCCM 2012 and get in state where 2 from 3 replications are active.
    Mainly with puting  relevatnt pub  files to RCM.BOX. But global data replication from CAs to PRI is still failed. No idea ....
     More related articles:  
    http://blogs.technet.com/b/sudheesn/archive/2012/10/21/drs-initialization-in-configuration-manager-2012.aspx
    http://anoopcnair.com/2012/06/20/sccm-configmgr-2012-site-to-site-replication-sql-data-replication-service-replication-configuration-management-sql-service-broker-replication-groups-and-manual-sync/
    And one more thing - do not know it is related or not
    Severity Type Site code Date / Time System Component Message ID Description
    Error Milestone XXX 12/14/2012 10:34:29 AM server.domain.local SMS_POLICY_PROVIDER 620 Microsoft SQL Server reported SQL message 547, severity 16: [23000][547][Microsoft][SQL Server Native Client 10.0][SQL Server]The INSERT
    statement conflicted with the FOREIGN KEY constraint "ResPolicyMap_PolicyAssignment_FK". The conflict occurred in database "CM_XXX", table "dbo.PolicyAssignment", column 'PADBID    Please refer to your Configuration Manager documentation, SQL
    Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.
    It is jaming replication ? and how fix DB inconsistency detected by Replication Link analyzer ?

  • Maintaining the structure of a SQL Server staging area and dwh aligned with the Oracle data source

    Hi,
    I'm working in a context where the data source system, in Oracle, is a continuos work in progress. Each 1-2-3 weeks the data source system in the prod environment is updated with new tables or updated table (with new columns or altered columns). So, it is
    important to apply in a rapid manner the related changes in the data structure of the SQL Server staging area and dwh.
    The issues to solve are:
    a. maintaining SQL Server data structure of the staging area aligned with the data structure of the Oracle data source;
    b. maintaing SQL Server data structure of the staging area aligned with the data structure of the SQL Server staging area.
    In order to solve these issues it could be useful to think to an authomatic manner to alert when a data structure change occurs and a simple manner to apply the changes on SQL Server data structure.
    Any suggests, please? Many thanks

    We use Oracle CDC service in SQLServer. It has a flag to indicate the schema changes happening at the Oracle end. We track the schema changes using it and then apply changes to sqlserver side. And regarding automation you can use Biml as suggested or .NET
    scripts inside script task.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • InfoPack processing (PSA and data targets in parallel) data and lock issues

    Good morning,
    We are on BW 3.5 and contemplating changing our InfoPackages from option 1 (PSA then data targets) to option 2 (PSA and data targets in parallel) for performance reasons (test have shown a gain of 50% in load time compared to using option 1).
    Issues have been raised that using option 2 may lead to data consistency and lock issues especially for SD infosources where we are dealing with multiple daily status changes for same document that need to be read in a specific order.
    From what I have read, such issues were possible in BW 2.x e.g. OSS Note 384023 and 364577. However, I am under the impression that the issues may have been resolved in BW 3.x and that it is "safe" to use option 2 (PSA and data targets in parallel).
    Would really appreciate if you could please share your experience when using processing option 2 (PSA // DT) especially in a BW 3.xx system.
    Thank you in advance,
    Catherine

    Hi Amit,
    The help text (vers. 3.5) for this method of loading says simply -
    "A process is started to write the data from this data packet into the PSA for each data package. If the data is successfully updated in the PSA, a second parallel process is started. In this process, the transfer rules are used for the package data records, data is adopted by the communication structure, and it is finally written to the data targets. Posting of the data occurs in parallel by packet.
    This method is used to update data into the PSA and the data targets with a high level of performance. The BW system receives the data from the source system, writes it to the PSA, and starts the update immediately and in parallel into the corresponding data target"
    Not sure where you got your description from, but is not explained well and confusing.
    Regards,
    Ken

  • Erratic Mouse and Keyboard issues...with weird console log...

    Hello All,
    I recently installed Snow Leopard on my 2x2.8 Quad Core Mac Pro following a boot drive melt down. Apple replaced the drive via Apple Care and I re-installed all my apps. The only additional item of note is I have Lycom SATA four port card that required a driver update.
    Since setting up this machine with the new OS I am having massive issues with keyboard lag, erratic mouse movement and intermittent freezing.
    I've run tech tools deluxe and everything passes with that app. I cant find the original install disks so running AHT on this machine isn't going to happen.
    I've tried with and without the driver and the issue seems to still be there.
    On a whim I opened console and I am seeing this message hundreds and hundreds of times over...
    8/8/10 2:21:11 PM com.apple.launchd[1] (org.xinetd.xinetd[2652]) Exited with exit code: 1
    8/8/10 2:21:11 PM com.apple.launchd[1] (org.xinetd.xinetd) Throttling respawn: Will start in 10 seconds
    8/8/10 2:21:21 PM com.apple.launchd[1] (org.xinetd.xinetd[2655]) posix_spawn("xinetd", ...): No such file or directory
    Anyone got any thoughts on this?
    Thanks,
    Scott

    Jstys92,
    Heat?  Motherboard?  Sounds like hardware since it's across Operating systems...
    If you have a warranty, this is the time to call HP.
    HP Product Warranty Check
    Contact HP - Worldwide
    Contact HP - USA
    If not, I still think you have a HW issue.  It is relatively consistant, too.  Like something is breaking down - physically.  Not a disk - BIOS... notherboard... something that holds everything together.
    Computers are not supposed to warm up and then start doing whatever they want.
    We do not live it in that world, at least not yet.
    ===========================================================================
    You could run some Diagnostics.  The UEFI Diagnostics, if you don't already have them on your system, are very good and provide a decent "human interface".
    HP System Diagnostics (UEFI)
    Description:   This package provides the HP System Diagnostics (UEFI) for the supported notebook/laptop models and operating systems. HP System Diagnostics is a UEFI-based hardware diagnostics program that is used to validate if a system is functional enough to start up the operating system. The diagnostics are accessed during startup by pressing F2 immediately after power on.
    =========================================================================
    Good Luck!
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Failed Hardware Scan and other issues E440

    Hi all,
    This is probably more rant than anything, but I wanted to give a heads up to others too.
    I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
    In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
    Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
    I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
    So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
    Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
    When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
    So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
    After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
    I also found two pictures of the repair person in the recycle bin...
    So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
    I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
    So, he sent me ANOTHER BOX. I've built up quite a stack of them.
    Our power was out AGAIN from the 17th through the 19th (don't get me started).
    I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
    So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact.  I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
    They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
    I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
    Part Description                                           Symptom
    IMAGE                                                             Replaced due to engineering change
    System board                                                 Network card error
    Hard disk drive                                                Network card error
    ECA-WIRELESS                                            <no symptom listed>
    There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
    When I booted it up, the first thing I noticed, in the lower right corner was:
    Windows 8.1
    SecureBoot isn’t configured correctly
    Build 9600
    I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
    Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
    Your PC ran into a problem and needs to restart. We're just
    collecting some error info, and then we'll restart for you. (xx% complete)
    If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
    Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
    By 3pm yesterday there were 34 system events in the configuration history.
    I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
    Log Information,
    Canceled 04/24/2015 n:nn pm 
    You have not done a hardware test on your computer
    And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
    When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
    I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
    At some point, the error about SecureBoot went away.
    Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
    Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
    Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
    In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
    After these updates, I flashed the new BIOS.
    Then, I ran hardware scan again...
    Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
    In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
    There are 867 events in the event viewer - Critical, Error, and Warning...
    Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
    The rest are from when Lenovo had it and yesterday and today.
    64 of them are the disk error.
    341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
    3 times it's rebooted without cleanly shutting down
    60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
    One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
    16 are warnings that various processors in Group 0 are being limited by system firmware.
    12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
    108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
    16 are application errors
    One is for the computer rebooting from a "bug check"
    15 are for name resolutions timing out after none of the configured DNS servers responded.
    10 are for SecureBoot being disabled.
    14 for services terminating unexpectedly
    15 are for WLAN Extensibility Module has stopped
    61 are for applications not being able to be restarted because the application SID does not match Conductor SID
    12 are for activation of CLSID timing out waiting for the service wuauserv to stop
    So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
    I'll keep you updated!

    Hi amycdero and welcome to the HP Forum,
    I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
    In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
    This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
    I hope this information is helpful. Please let me know.
    Thank you,
    I worked on behalf of HP.

  • Battery, heat, and ringer issues

    I recently purchased the Iphone 4s.. this is my first iphone
    I did the update that Apple sent out to help the battery and it seems like it worse then before the update??  My phone has been off the charger for 45 minutes, I sent 1 text message, and had 1 phone call.  The percentage is now at 87.  It the last 2 minutes i have watched it go down 2%?  Is this normal?  Also, the phone gets REALLY hot...
    If not, what do I do now??
    Also, I keep missing phone calls because I don't hear the phone ring... but the ringer is all the way up..
    Any help will be greatly appreciated!!

    mdorling wrote:
    We've got the same issues, the BBM contacts went, now the BB won't charge ... we've tried all ways to get it to charge ... typically it's just over a month old so we can't get a full refund ... we are on here trying to find out what we need to do as we can't obtain a telephone number for BB customer services nor an email address only a tweet address which I haven't downloaded onto my handset.  So am stuck!!! Any and all advice very gratefully received as seriously peeved with BB models now.  My first BB was fantastic ... but all newer models have had problems ... think BB needs to ensure that all techy problems are fully ironed out prior to launching their new BB handset!
    1. Connect your Z10 to the wall outlet charger for an hour and then with the Z10 powered on, and with it STILL CONNECTED, remove the battery for a minute and replace. This will normally reset the the on-device battery meter and allow the charging status and percentage to show more correctly.
    2. Orange is your tech support contact and any issue which they cannot resolve, they should escalate up to BlackBerry tier two tech support, or you should ask/demand that.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IQ826t Restart and Heating Issue

    One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
    Besides that, IQ826t, Win 7 Ultimate SP1
    All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
    Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
    Biggest Issue:
    I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
    Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The  Bluescreen error code on my error code reader)..  This machine under warranty and I had issues with it constant (even in Vista)
    They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter.  I have a firmware reset (default settings) and the issue persist..
    The Error Code relates always HAL.dll or ntoskrnl.exe
    One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
    What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
    The Symptoms before the Crash (happens any time.. Even right after a power up)
    If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy..  Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
    Minor Issues (but could be related)
    1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port  where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
    2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue...  Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
    3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
    4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
    This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

    Look in your Settings > App Manager.
    Tap Device Monitor.
    Tap the Battery tab.
    At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
    What apps or processes are consuming the most battery power?
    ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
    Social accounts such as Facebook or Twitter?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

Maybe you are looking for