Staging different from target giving error

Hi Friends.
when i am making staging different from target its giving error not enough privillege to create table.
What changes i should do so that my IKM will work.
Thanks in advance for the help.
Linkan

Wow
Thank you very much for such quick response.I have privillege to create table,view,..... in my staging area not on target. I had asked DBA but he denided to give create privillege in target.Its only in my staging schema.
I will try to change the schema & will check if its working or not.
Thank you very much again.

Similar Messages

Staging area different from target - which KM???

Hi,
I need to transfer data from CSV to DB (only new inserts operation)
I am working the following KM's
LKM File to SQL
IKM SQL Control Append
It's working fine. However now i need to keep the staging area (where C$, I$ etc table are created) in a separate schema.
I have created a diff schema for staging area and selected in the interface "Staging area different from target"
However not sure of which KM's to use.
Please let me know how to achieve this.
Thanks,
Rosh

Hi
1st thing you have to give the workschema for temp tables when creating physical schema in dataserver for target.
Then you have to select the workschema in overview of interface as "staging different from target".
After doing this when you will use predefined KM for the interface it will create temp tables in workschema.
Now suppose you are not giving the workschma at the time of creating physical schema and you have selected "staging different than target" in interface.Here your C$ table will be created in your workschema but I$ table that is used by IKM is going to be created on target schema.So for this again you have change the IKM KM i.e. where to create I$ table (wokrschema) by selecting the corresponding logical schema.
So its better you give the workschema at the time of creating physical schema.
Here is the query to give privilege by the sys_dba
Grant create any table to ODI_TEMP.
Hope you got it
(Please mark the answer as correct or helpful and close the thread)
Thanks

Staging area different from target

I am using oracle 10g as target database. I want to upload a flat data file into oracle table.
I uploaded sucessfully using LKM Oracle (SQL Loader) in Interface. In this case i am using oracle database as a staging area. So all load transferred to my database at the timing of processing.
I want to create staging area at my file server. So please help me out to resolve this problem.

A staging area must accept SQL syntax.
A File server won't accept SQL syntax.
So if you speak about Physical Server where you got your file and if there is a RDBMS installed in maybe but else I don't really know how you can...
You can specify another data server for your staging area or use the SUNOPSIS_MEMORY_ENGINE which use the cache I think but it's not optimized I think...
For this in the Definition Tab of your Interface choose Staging Area different from the Target and then select in the list box SUNOPSIS_MEMORY_ENGINE.

"challan material is different from material document " error in GR

hi all..
when i am trying to do GR with respect to challan that i have created its showing
"challan material is different from material document "
if i didn choose the option "Refer sub-con challan" and tried to post it shows dump error of
"Exception condition "T681Z_MISSING" raised.".
dont we get the values while creating sun con challan in J1IF01 ?
can you suggest where i have missed the steps.
Thanks
r.Kannan.

Whenever inwarding the material against the Sub contracting , challen no to be given, but can you tell , which version you r working,
Its this problem continue for all the sub contracting & for only on login or many logins
Regards,
Suresh.P

SM37 - executing server different from target server

Hello Everybody,
Most of our jobs are scheduled to run on a unique target server,
but when i occasionally check all the finished job report on sm37 i find that -
small amount of jobs finally ran on executing server which is different from the specified targer server.
we are not facing any resources issues,
so may anyone know how to analyse it? and what are the possible reasons this problem may occur?
have a nice day.

I think that's an issue for SAP via OSS. Have you checked for notes yet? I do see several notes that apply but mostly for releases 6.4 and earlier. I don't know of a system profile parameter that would allow that setting to be overridden but that doesn't mean that there isn't one...

Running the same application in different database table- giving error:

Hi All,
I m new to JSF, spring and Hibernate web application. I have done a web project using JSF, Hibernate and Spring. We have to maintain the Data records which is stored in mysql db. Now there are different table is there such as example Employee Details and Company Details. So we created two seperate application o tomacat, For both Application we use same functionality except the JSP FILE Name and table name (Which is changed according to Application).
In the employee.hbm.xml
I changed the table name according to application. Two table (Company Details & Employee Details)...
Now while running the application on the tomcat server, only one application is running at a time. if we start running the Employee Application, then Company Application is giving the below error,
Error in Log:
The resourse is already in used/busy.
Interesting thing is only one Application is running at a time and other is in stop status.
Could you please help us, how to overcome the error,
Is it not possible to run both the application on different browsers.
In logs the below error is showing:
java.lang.Exception: Socket bind failed: [730048] Only one usage of each socket address (protocol/network address/port) is normally permitted.
Could you please give some idea to sort out the below issue.
Thanks in advance.

Yes, I've changed the DynamicJDBCBindingFilter Class in this way:
method doFiletr
String usrName = request.getParameter(USERNAME_PARAM);
String pswd = request.getParameter(PASSWORD_PARAM);
String URL = request.getParameter(URL_PARAM);
session.setAttribute(Configuration.DB_USERNAME_PROPERTY, usrName);
session.setAttribute(Configuration.DB_PASSWORD_PROPERTY, pswd);
session.setAttribute(Configuration.DB_CONNECT_STRING_PROPERTY,URL);//
This is for retrieve the JDBC URL from the login page
Then i've modified the DynamicJDBCEnvInfoProvider to accept this new parameter
if(mJDBCURL!=null)
((Hashtable) connEnvironment).put(Configuration.DB_CONNECT_STRING_PROPERTY,mJDBCURL);
Finally i modifed the DynamicJDBCSessionCookieFactory
tho put this new parameter in DynamicJDBCEnvInfoProvider class
EnvInfoProvider provider = new DynamicJDBCEnvInfoProvider(
(String)session.getAttribute(Configuration.DB_USERNAME_PROPERTY),
(String)session.getAttribute(Configuration.DB_PASSWORD_PROPERTY),
(String)session.getAttribute[b](Configuration.DB_CONNECT_STRING_PROPERTY));
cookie.setEnvInfoProvider(provider);
But when I test the application it doesn't works.
With the correct parameter the login fails.
I'm not using a DB on my local machine, but one on another machine which has not the Dept table.
thanks for help

Relink from adadmin giving error

While trying to relink FNDLIBR.exe and FNDSM.exe through adadmin is giving below error. I have also sourced the env file correctly.
I am getting same error if I try from command prompt aswell.
adrelink.sh force=y link_debug=y “fnd FNDLIBR”
adrelink.sh force=y link_debug=y “fnd FNDSM”
Please advise how to resolve the below error.
+Enter executables to relink, or enter 'all' [all] : FNDLIBR.exe+
D:/oracle/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh 33: save: fork_level=1SetHandleInformation() failed: fd 0 handle 0x3 type 2: The parameter is incorrect.
D:/oracle/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh 35: save: fork_level=1
SetHandleInformation() failed: fd 0 handle 0x3 type 2: The parameter is incorrect.
An error occurred while relinking application programs.

It's a typing mistake, my environment is 2008 not 2003. Yes it is on win 2008 64bit R2. while this is working fine in production but only after cloning to new test environment is giving this error of OPP not coming up and service manager not coming up. While all the other services are running fine and autoconfig on db and apps tier is also executed successfully. So due to this problem only our XML publisher based reports that will be using OPP are failing. Other than this OPP and Service Manager rest all is fine. Please suggest if you can give any idea to resolve it so I can bring OPP and service manager up and running. I almost tried all the below,
0. check the OPP log file. You follow below navigation
System Administrator -> Concurrent : Manager -> Administrator
On this screen click on Output Post Processor and then click on Processes button -> Manager Log button
A new web page will open showing the manager log. Come to the bottom, you might see the error.
1. bounce the OPP (or all the CMs using adcmctl.sh script) and try again.
2. Increase 'concurrent: OPP Response Timeout' profile value from 60 to about 180. Then restart the concurrent manager program.
3. the path /appslog/fin_top/utl/fintest/out/ might not be correct. So as per the note ID 428855.1 changed the path to valid location, Navigate the following as the responsibility “XML Publisher Administrator”
Select Administration on the Personal Home Page
Under the Configuration tab select Properties and then General.
From there the Temporary directory will be displayed.
Changed the path to some thing that is existing physically.
After that bounce the output post processor. This should resolve the issue
====================================
+*<Moderator edit - deleted MOS Doc content - pl do not post contents of MOS Docs - this is a violation of your Support agreement>*+
====================
I think, Do the below if Service Manager is not running or not available.
+*<Moderator edit - deleted MOS Doc content - pl do not post contents of MOS Docs - this is a violation of your Support agreement>*+
=====================

Create table from view giving error

i am trying to creating a table from view it is giving following error. can you please help
create table jd as
select * from A.ab_v where 1=2;
error
ORA-01723
zero columns not allowed

As others already pointed out you have NULL as view column(s). You need to either modify view and use CAST(NULL AS desired-type). For example:
SQL> create or replace
2    view v1
3      as
4        select null new_date
5          from dual
6 /
View created.
SQL> create table tbl
2    as
3      select *
4        from v1
5 /
    select *
ERROR at line 3:
ORA-01723: zero-length columns are not allowed
SQL> create or replace
2    view v1
3      as
4        select cast(null as date) new_date
5          from dual
6 /
View created.
SQL> create table tbl
2    as
3      select *
4        from v1
5 /
Table created.
SQL> drop table tbl
2 /
Table dropped.
SQL> create or replace
2    view v1
3      as
4        select cast(null as number) new_number
5          from dual
6 /
View created.
SQL> create table tbl
2    as
3      select *
4        from v1
5 /
Table created.
SQL> Or list individual view columns with NULL CASTing in CTAS:
SQL> create or replace
2    view v1
3      as
4        select null new_date
5          from dual
6 /
View created.
SQL> create table tbl
2     as
3       select cast(new_date as date) new_date
4         from v1
5 /
Table created.
SQL> desc tbl
Name                                      Null?    Type
NEW_DATE                                           DATE
SQL> set null NULL
SQL> select *
2    from tbl
3 /
NEW_DATE
NULL
SQL> SY.

Lookup issue when staging area diff from target

Hi,
I am using staging area different from target (csv file to database)
Everything is working fine the source data is moved to target. The interface runs suiceessfuly.
Now i want to add a lookup during transformation using a lookup table.
When i do that using lookups in quick edit section, i am getting an error.
When i run the interface, the C$ gets created in staging area - that is correct.
However when inserting from staging to target, now the ODI searches for the C$ table in target area instead of the staging..
Please help.
Thanks,
Rosh

Hi
1st thing you have to give the workschema for temp tables when creating physical schema in dataserver for target.
Then you have to select the workschema in overview of interface as "staging different from target".
After doing this when you will use predefined KM for the interface it will create temp tables in workschema.
Now suppose you are not giving the workschma at the time of creating physical schema and you have selected "staging different than target" in interface.Here your C$ table will be created in your workschema but I$ table that is used by IKM is going to be created on target schema.So for this again you have change the IKM KM i.e. where to create I$ table (wokrschema) by selecting the corresponding logical schema.
So its better you give the workschema at the time of creating physical schema.
Here is the query to give privilege by the sys_dba
Grant create any table to ODI_TEMP.
Hope you got it
(Please mark the answer as correct or helpful and close the thread)
Thanks

Staging area and Target area in ODI

Hii...experts.
How Staging area is different from target area and same as target area?? what are their benefits and drawbacks in both??
Please suggest me with some pictorial representation..
Thanks

Hi SRK
I think you'll find your answer in this old white paper from oracle. The new version of the best practices are much smaller :/.
http://www.oracle.com/technetwork/middleware/data-integrator/overview/odi-bestpractices-datawarehouse-whi-129686.pdf
Page 87-95.
Hope it helps.
Regards,
Jerome
ps : p79-84 are interesting too

WebdynproJava Components giving error while migrating from NWDS SP03 toSP09

Hi,
The original DC's were developed in lower NWDS patch level, currently i have upgraded the patch level of NWDS to 09 and importing the Wed Dynpro components from NWDI; but some of the DC's are proper but some are giving error.
I tried Project build, DC build and Repairing the DC's but nothing worked.

Hi Siarhei,
Error:
The constructor WSTypedModel(String, String, QName, String, Map, String, IWSTypedModelInfo, Map<String,QName>) is undefined
Warnings:
Versions of 'com.sap.dictionary.runtime' are different.
Versions of 'com.sap.dictionary.services' are different.
Versions of 'com.sap.tc_.wd_.rtgen' are different.
Forgot to mention i am working on CE7.1
Regards
Jagan

After updating waterfox 12.0 to 15.0, but while launching from task bar its giving error not compatable version 15.0 min/max version 12.0

after updating waterfox 12.0 to 15.0, and i opend the app and pin it to the task bar (windows 7 64bit enterprise edition) but while launching from task bar its giving error not compatable version 15.0 min version 12.0 ,max version 12.0

Such an error is caused by some files that weren't updated successfully, so you are left with a mixture of files from different Firefox versions.<br />
There is usually some security software involved that protects .ini files against modification (update).
You will still have to do a clean reinstall and delete the Firefox program folder before reinstalling a new copy of Firefox.
*C:\Program Files (x86)\Mozilla Firefox\

Video import problem from iphone5 to PC giving error

Hi evereyone,
I have iphone 5. I try to import my videos but am not able to import all, its giving error. I tried also using windows live photo still same prob. the imported videos have problem in playing. I tried with vlc, quick time, the frames are broken and audio video lag. Please help me how i can import all and rum smoothly.

Ilan_B wrote:
Every time I plug my iphone 5 into the laptop (using windows 7) the easiest way is to right click on the portable device (iphone icon) and import to my pictures, BUT every time I do this it wants to import ALL photos and videos.
And when you do this, it should ask if you want to import the pictures that have already been imported. Select No.
Then, after you import, the photos should be deleted from the Camera Roll.
After the photos are imported and deleted from the Camera Roll, you can import using iTunes, only the photos you want on the iPhone.

Migrating from crystal report 8.5 to 10.0 giving error

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing

Migrating from crystal report 8.5 to 10.0 giving error 01S00:error

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing
1.dsn
2.usid
3.database
4.password
what else is missing . plz help.....

Well, you can migrate, you can not upgrade (semantics I suppose). E.g.; the RDC was deprecated in CR XI r1 and retired in CR 2008. Thus there is no way for you to upgrade to version 12 of the RDC as there is no such thing. So, from here, you have two options: migrate / port the app to .NET, or Java SDKs.
Re. RDC, see my blog here:
/people/ludek.uher/blog/2008/10/20/report-designer-component--past-present-future
For porting the app to .NET, see this article:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0eb394f-931e-2b10-3b82-9413bfc3f457
Ludek

Staging different from target giving error

Similar Messages

Maybe you are looking for