Stale NFS handle after failover

Hello!
We are using two cluster nodes provide an NFS server. When a failover occurs, the users which have mounted their home directory are unable to delete any directories. The error message is "device or resource busy". They have to log out and an administrator has to unmount the home directory.
How can I avoid this? The clients are Ubuntu 8.04.
TIA
Stephan

Today I patched the systems and got the following error on the console:
ERROR: svc:/network/nfs/nlockmgr:default: :kill with no contract
ERROR: svc:/network/nfs/status:default: :kill with no contractPerhaps this has to do with my current problem?

Similar Messages

Stale nfs handle on root partition

To show how bad is the crisis - i had to write the answer to the register question of these forums *by hand* on my phone to post this.
yesterday my computer stopped browsing the internet, and after talking with NetworkManager i found that there is a stale nfs handle on resolv.conf.
I tried fsck on startup but got nothing.
e2fsck reply was "The superblock could not be read" and to try running e2fsck -b 8193.
I ran it and got the same answer.
I tried to run in in single user mode and got the same answer plus "bad magic number"
So i tried running mkfs -n /dev/sda3(root)but can't because the partition is mounted.
any ideas?
I can't post detailed logs because my computer has no internet and I can't copy paste

There's no point saying it, you have to write it in a post on the forums.
resolv.conf is a text file on the local filesystem. A stale nfs handle won't stop you from editing that file.
I'm guessing you might have a setup that deviates from the norm, it's hard to know for sure as you have provided so little info.
Hope you eventually sort it out.

Server for NFS deletes the partially copied file after failover

Hello,
I found the strange behaviour in Server for NFS in the microsoft foc cluster.
I have a foc cluster of two nodes(windows server 2k12r2) and server for nfs role is installed on both. now I did mount the export from the client(windows server 2k12r2) where client for nfs role is installed;
and a large file copying from the clients local drive to the mounted export is started.
Now during this copying operation I did switch the export to second node(moved it using the failover cluster manager wizard). and what I found is the copying interrupts with
error message "there is problem accessing file path" and on retry the copying starts all over again, I mean if the 50% was copied previously then
after retry it will start from 0%.
I watched the system events on second node with the "procmon" and I found; after the disk gets attached to the second node, the delete operation is get called for this file.
Now what I need to know is why this delete is been called and who made this called. In the stack of the delete operation I could track the nfssvr.sys but not sure what attributes of that file made it to call the
delete.

Hi,
It takes us some time to create a failover cluster for testing.
We tried to copy a large folder which contains many files, and a large VHD file we created.
The result is the same - it will not restart the copy after failover. Thus as you said it is not caused by design and it should be an issue on your side which causes a Delete and redo the copy.
Is there any application or specific network settings could terminate a disconnected copy process? Currently I do not have much information about this.
Edit: I noticed that it is NFS share and in our test we are using SMB share. Will do the test again to see if any difference.

Various errors after upgrade (stale file handle, corrupt file)

Hi,
I performed a system update a couple of days ago and since then have not been able to access certain directories (it seems to be only my home directory and any directory in my Dropbox) using graphical file browsers (tested with thunar and nautilus). I can access them through the command line just fine but graphical file browsers give me a "Stale file handle" error.
When I try to open a libreoffice application, I get the following error: "The application cannot be started. The configuration file "/etc/libreoffice/bootstraprc" is corrupt".
The relevant part of my pacman logfile looks like this:
[2014-07-10 07:05] [PACMAN] Running 'pacman -Syu'
[2014-07-10 07:05] [PACMAN] synchronizing package lists
[2014-07-10 07:05] [PACMAN] starting full system upgrade
[2014-07-10 07:16] [PACMAN] upgraded alsa-lib (1.0.27.2-1 -> 1.0.28-1)
[2014-07-10 07:16] [PACMAN] upgraded alsa-plugins (1.0.27-2 -> 1.0.28-1)
[2014-07-10 07:16] [PACMAN] upgraded alsa-utils (1.0.27.2-1 -> 1.0.28-1)
[2014-07-10 07:16] [PACMAN] upgraded lib32-gcc-libs (4.9.0-3 -> 4.9.0-5)
[2014-07-10 07:16] [PACMAN] upgraded gcc-libs-multilib (4.9.0-3 -> 4.9.0-5)
[2014-07-10 07:16] [PACMAN] upgraded aspell (0.60.6.1-1 -> 0.60.6.1-2)
[2014-07-10 07:16] [PACMAN] upgraded readline (6.3.005-1 -> 6.3.006-1)
[2014-07-10 07:16] [PACMAN] upgraded bash (4.3.011-1 -> 4.3.018-3)
[2014-07-10 07:16] [PACMAN] upgraded autoconf (2.69-1 -> 2.69-2)
[2014-07-10 07:16] [PACMAN] upgraded babl (0.1.10-1 -> 0.1.10-2)
[2014-07-10 07:16] [PACMAN] upgraded qca (2.0.3-4 -> 2.0.3-5)
[2014-07-10 07:16] [PACMAN] upgraded libdbusmenu-qt (0.9.2-2 -> 0.9.2-3)
[2014-07-10 07:16] [PACMAN] upgraded polkit-qt (0.103.0-2 -> 0.103.0-3)
[2014-07-10 07:16] [PACMAN] upgraded shared-mime-info (1.2-2 -> 1.3-1)
[2014-07-10 07:16] [PACMAN] upgraded hunspell (1.3.2-3 -> 1.3.3-1)
[2014-07-10 07:16] [PACMAN] upgraded perl (5.18.2-2 -> 5.20.0-5)
[2014-07-10 07:16] [PACMAN] upgraded hspell (1.2-1 -> 1.2-2)
[2014-07-10 07:16] [PACMAN] upgraded enchant (1.6.0-4 -> 1.6.0-5)
[2014-07-10 07:16] [PACMAN] upgraded giflib (5.0.6-1 -> 5.1.0-1)
[2014-07-10 07:16] [PACMAN] upgraded libxcursor (1.1.14-1 -> 1.1.14-2)
[2014-07-10 07:16] [PACMAN] upgraded phonon-qt4-gstreamer (4.7.1-1 -> 4.7.2-1)
[2014-07-10 07:16] [PACMAN] upgraded libqzeitgeist (0.8.0-3 -> 0.8.0-4)
[2014-07-10 07:16] [PACMAN] upgraded phonon-qt4 (4.7.1-2 -> 4.7.2-1)
[2014-07-10 07:16] [PACMAN] upgraded kdelibs (4.13.1-3 -> 4.13.2-3)
[2014-07-10 07:16] [PACMAN] upgraded gnupg (2.0.22-2 -> 2.0.25-1)
[2014-07-10 07:16] [PACMAN] upgraded gpgme (1.4.3-1 -> 1.5.0-1)
[2014-07-10 07:16] [PACMAN] upgraded qjson (0.8.1-2 -> 0.8.1-3)
[2014-07-10 07:16] [PACMAN] upgraded kdepimlibs (4.13.1-1 -> 4.13.2-1)
[2014-07-10 07:16] [PACMAN] upgraded xapian-core (1:1.2.17-1 -> 1:1.2.18-1)
[2014-07-10 07:16] [PACMAN] upgraded libpng (1.6.10-1 -> 1.6.12-1)
[2014-07-10 07:16] [PACMAN] upgraded pixman (0.32.4-1 -> 0.32.6-1)
[2014-07-10 07:16] [PACMAN] upgraded libvdpau (0.7-1 -> 0.8-1)
[2014-07-10 07:16] [PACMAN] upgraded fixesproto (5.0-2 -> 5.0-3)
[2014-07-10 07:16] [PACMAN] upgraded damageproto (1.2.1-2 -> 1.2.1-3)
[2014-07-10 07:16] [PACMAN] upgraded libxdamage (1.1.4-1 -> 1.1.4-2)
[2014-07-10 07:16] [PACMAN] upgraded libdbus (1.8.2-1 -> 1.8.4-1)
[2014-07-10 07:16] [PACMAN] upgraded dbus (1.8.2-1 -> 1.8.4-1)
[2014-07-10 07:16] [PACMAN] upgraded kmod (17-1 -> 18-1)
[2014-07-10 07:16] [PACMAN] upgraded hwids (20130915.1-1 -> 20140602-1)
[2014-07-10 07:16] [PACMAN] upgraded libsystemd (212-3 -> 214-2)
[2014-07-10 07:16] [PACMAN] upgraded pam (1.1.8-4 -> 1.1.8-5)
[2014-07-10 07:16] [ALPM-SCRIPTLET] :: coredumps are no longer sent to the journal by default. To re-enable:
[2014-07-10 07:16] [ALPM-SCRIPTLET] echo >/etc/sysctl.d/50-coredump.conf \
[2014-07-10 07:16] [ALPM-SCRIPTLET] "kernel.core_pattern=|/usr/lib/systemd/systemd-coredump %p %u %g %s %t %e"
[2014-07-10 07:16] [PACMAN] upgraded systemd (212-3 -> 214-2)
[2014-07-10 07:16] [PACMAN] upgraded libffi (3.0.13-4 -> 3.1-2)
[2014-07-10 07:16] [PACMAN] upgraded llvm-libs (3.4.1-2 -> 3.4.2-1)
[2014-07-10 07:16] [PACMAN] upgraded mesa (10.1.4-1 -> 10.2.3-1)
[2014-07-10 07:16] [PACMAN] upgraded libxdmcp (1.1.1-1 -> 1.1.1-2)
[2014-07-10 07:16] [PACMAN] upgraded kbproto (1.0.6-1 -> 1.0.6-2)
[2014-07-10 07:16] [PACMAN] upgraded libx11 (1.6.2-1 -> 1.6.2-2)
[2014-07-10 07:16] [PACMAN] upgraded libxkbfile (1.0.8-1 -> 1.0.8-2)
[2014-07-10 07:16] [PACMAN] upgraded xorg-xkbcomp (1.2.4-1 -> 1.2.4-2)
[2014-07-10 07:16] [PACMAN] upgraded xorg-setxkbmap (1.3.0-1 -> 1.3.0-2)
[2014-07-10 07:16] [PACMAN] upgraded xorg-fonts-encodings (1.0.4-3 -> 1.0.4-4)
[2014-07-10 07:16] [PACMAN] upgraded xorg-bdftopcf (1.0.4-1 -> 1.0.4-2)
[2014-07-10 07:16] [PACMAN] upgraded xorg-mkfontdir (1.0.7-1 -> 1.0.7-2)
[2014-07-10 07:16] [PACMAN] upgraded xorg-font-util (1.3.0-1 -> 1.3.0-2)
[2014-07-10 07:16] [PACMAN] upgraded xorg-font-utils (7.6-3 -> 7.6-4)
[2014-07-10 07:17] [ALPM-SCRIPTLET] Updating font cache... done.
[2014-07-10 07:17] [PACMAN] upgraded xorg-fonts-misc (1.0.1-2 -> 1.0.1-3)
[2014-07-10 07:17] [PACMAN] upgraded xorg-server-common (1.15.1-1 -> 1.15.2-1)
[2014-07-10 07:17] [PACMAN] upgraded xorg-server (1.15.1-1 -> 1.15.2-1)
[2014-07-10 07:17] [PACMAN] upgraded nvidia-utils (337.19-1 -> 337.25-3)
[2014-07-10 07:17] [PACMAN] upgraded nvidia-libgl (337.19-1 -> 337.25-3)
[2014-07-10 07:17] [PACMAN] upgraded lzo2 (2.06-3 -> 2.08-1)
[2014-07-10 07:17] [PACMAN] upgraded cairo (1.12.16-1 -> 1.12.16-2)
[2014-07-10 07:17] [PACMAN] upgraded poppler (0.26.1-1 -> 0.26.2-1)
[2014-07-10 07:17] [PACMAN] upgraded poppler-qt4 (0.26.1-1 -> 0.26.2-1)
[2014-07-10 07:17] [PACMAN] upgraded libtasn1 (3.4-1 -> 3.6-1)
[2014-07-10 07:17] [PACMAN] upgraded gnutls (3.3.2-1 -> 3.3.5-1)
[2014-07-10 07:17] [PACMAN] upgraded libva (1.3.1-1 -> 1.3.1-2)
[2014-07-10 07:17] [PACMAN] upgraded opencore-amr (0.1.3-1 -> 0.1.3-2)
[2014-07-10 07:17] [PACMAN] installed libx264 (1:142.20140311-4)
[2014-07-10 07:17] [PACMAN] upgraded xvidcore (1.3.2-3 -> 1.3.3-1)
[2014-07-10 07:17] [PACMAN] upgraded x265 (1.0-1 -> 1.1-1)
[2014-07-10 07:17] [PACMAN] upgraded ffmpeg (1:2.2.2-3 -> 1:2.2.4-2)
[2014-07-10 07:17] [PACMAN] upgraded ebook-tools (0.2.2-1 -> 0.2.2-2)
[2014-07-10 07:17] [PACMAN] upgraded kdegraphics-mobipocket (4.13.1-1 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded kfilemetadata (4.13.1-1 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded baloo (4.13.1-1 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded binutils (2.24-4 -> 2.24-6)
[2014-07-10 07:17] [PACMAN] upgraded bluez (5.19-1 -> 5.21-2)
[2014-07-10 07:17] [PACMAN] upgraded bluez-libs (5.19-1 -> 5.21-2)
[2014-07-10 07:17] [PACMAN] upgraded ca-certificates-java (20140324-2 -> 20140324-3)
[2014-07-10 07:17] [PACMAN] upgraded openssl (1.0.1.g-1 -> 1.0.1.h-1)
[2014-07-10 07:17] [PACMAN] upgraded sqlite (3.8.4.3-2 -> 3.8.5-1)
[2014-07-10 07:17] [PACMAN] upgraded python2 (2.7.6-3 -> 2.7.8-1)
[2014-07-10 07:17] [PACMAN] upgraded python2-six (1.6.1-2 -> 1.7.3-1)
[2014-07-10 07:17] [PACMAN] upgraded python2-beautifulsoup3 (3.2.1-2 -> 3.2.1-3)
[2014-07-10 07:17] [PACMAN] upgraded libcl (1.1-3 -> 1.1-4)
[2014-07-10 07:17] [PACMAN] upgraded imagemagick (6.8.9.1-2 -> 6.8.9.5-1)
[2014-07-10 07:17] [PACMAN] upgraded libusb (1.0.18-1 -> 1.0.19-1)
[2014-07-10 07:17] [PACMAN] upgraded libwebp (0.4.0-1 -> 0.4.0-2)
[2014-07-10 07:17] [PACMAN] upgraded python2-pillow (2.4.0-1 -> 2.5.0-1)
[2014-07-10 07:17] [PACMAN] upgraded libunrar (1:5.1.5-1 -> 1:5.1.6-1)
[2014-07-10 07:17] [PACMAN] upgraded sip (4.15.5-2 -> 4.16.2-1)
[2014-07-10 07:17] [PACMAN] upgraded python2-sip (4.15.5-2 -> 4.16.2-1)
[2014-07-10 07:17] [PACMAN] upgraded pyqt4-common (4.10.4-2 -> 4.11.1-1)
[2014-07-10 07:17] [PACMAN] upgraded python2-pyqt4 (4.10.4-2 -> 4.11.1-1)
[2014-07-10 07:17] [PACMAN] upgraded calibre (1.38.0-1 -> 1.40.0-1)
[2014-07-10 07:17] [PACMAN] upgraded cdrdao (1.2.3-6 -> 1.2.3-7)
[2014-07-10 07:17] [PACMAN] upgraded libxft (2.3.1-2 -> 2.3.2-1)
[2014-07-10 07:17] [PACMAN] upgraded harfbuzz (0.9.28-1 -> 0.9.29-1)
[2014-07-10 07:17] [PACMAN] upgraded pango (1.36.3-2 -> 1.36.5-1)
[2014-07-10 07:17] [PACMAN] upgraded compositeproto (0.4.2-2 -> 0.4.2-3)
[2014-07-10 07:17] [PACMAN] upgraded libxcomposite (0.4.4-1 -> 0.4.4-2)
[2014-07-10 07:17] [PACMAN] upgraded libcups (1.7.3-1 -> 1.7.3-4)
[2014-07-10 07:17] [PACMAN] upgraded gdk-pixbuf2 (2.30.7-1 -> 2.30.8-1)
[2014-07-10 07:17] [PACMAN] upgraded gtk-update-icon-cache (2.24.23-1 -> 2.24.24-1)
[2014-07-10 07:17] [PACMAN] upgraded gtk2 (2.24.23-1 -> 2.24.24-1)
[2014-07-10 07:17] [PACMAN] upgraded xdg-utils (1.1.0.git20140207-1 -> 1.1.0.git20140426-1)
[2014-07-10 07:17] [PACMAN] upgraded flac (1.3.0-2 -> 1.3.0-3)
[2014-07-10 07:17] [ALPM-SCRIPTLET] Updating font cache... done.
[2014-07-10 07:17] [PACMAN] upgraded ttf-liberation (2.00.1-3 -> 2.00.1-4)
[2014-07-10 07:17] [PACMAN] upgraded chromium (35.0.1916.114-1 -> 35.0.1916.153-1)
[2014-07-10 07:17] [PACMAN] upgraded libcap-ng (0.7.3-1 -> 0.7.4-1)
[2014-07-10 07:17] [PACMAN] upgraded talloc (2.1.0-2 -> 2.1.1-1)
[2014-07-10 07:17] [PACMAN] upgraded libwbclient (4.1.7-1 -> 4.1.9-1)
[2014-07-10 07:17] [PACMAN] upgraded cifs-utils (6.2-1 -> 6.3-2)
[2014-07-10 07:17] [PACMAN] upgraded isl (0.12.2-1 -> 0.13-1)
[2014-07-10 07:17] [PACMAN] upgraded cloog (0.18.1-2 -> 0.18.1-3)
[2014-07-10 07:17] [PACMAN] upgraded clutter-gst (2.0.10-2 -> 2.0.12-1)
[2014-07-10 07:17] [PACMAN] upgraded cogl (1.18.0-2 -> 1.18.2-1)
[2014-07-10 07:17] [PACMAN] upgraded libirman (0.4.5-3 -> 0.4.5-4)
[2014-07-10 07:17] [PACMAN] upgraded lirc-utils (1:0.9.0-71 -> 1:0.9.0-74)
[2014-07-10 07:17] [PACMAN] upgraded x264 (1:142.20140311-1 -> 1:142.20140311-4)
[2014-07-10 07:17] [PACMAN] upgraded smbclient (4.1.7-1 -> 4.1.9-1)
[2014-07-10 07:17] [PACMAN] upgraded mplayer (37051-2 -> 37224-1)
[2014-07-10 07:17] [PACMAN] upgraded mencoder (37051-2 -> 37224-1)
[2014-07-10 07:17] [PACMAN] upgraded python2-cairo (1.10.0-1 -> 1.10.0-2)
[2014-07-10 07:17] [PACMAN] upgraded pygtk (2.24.0-3 -> 2.24.0-4)
[2014-07-10 07:17] [PACMAN] upgraded devede (3.23.0-1 -> 3.23.0-2)
[2014-07-10 07:17] [PACMAN] upgraded dhcpcd (6.3.2-1 -> 6.4.0-1)
[2014-07-10 07:17] [PACMAN] upgraded djvulibre (3.5.25.3-1 -> 3.5.25.3-2)
[2014-07-10 07:17] [PACMAN] upgraded dmxproto (2.3.1-2 -> 2.3.1-3)
[2014-07-10 07:17] [PACMAN] upgraded dnssec-anchors (20130320-1 -> 20140629-1)
[2014-07-10 07:17] [PACMAN] upgraded docbook-xml (4.5-5 -> 4.5-6)
[2014-07-10 07:17] [PACMAN] upgraded dvd+rw-tools (7.1-4 -> 7.1-5)
[2014-07-10 07:17] [PACMAN] upgraded json-glib (1.0.0-1 -> 1.0.2-1)
[2014-07-10 07:17] [PACMAN] installed libnm-glib (0.9.8.10-3)
[2014-07-10 07:17] [PACMAN] upgraded libmm-glib (1.2.0-3 -> 1.2.0-4)
[2014-07-10 07:17] [PACMAN] upgraded geoclue2 (2.1.4-1 -> 2.1.8-2)
[2014-07-10 07:17] [PACMAN] upgraded harfbuzz-icu (0.9.28-1 -> 0.9.29-1)
[2014-07-10 07:17] [PACMAN] upgraded webkitgtk2 (2.4.2-1 -> 2.4.3-2)
[2014-07-10 07:17] [ALPM-SCRIPTLET] ==> If you are using extensions you should update the extensions with
[2014-07-10 07:17] [ALPM-SCRIPTLET] ==> dwbem -u or dwbem -Nu
[2014-07-10 07:17] [PACMAN] upgraded dwb (2014.03.07-1 -> 2014.03.07-2)
[2014-07-10 07:17] [PACMAN] upgraded e2fsprogs (1.42.9-2 -> 1.42.10-1)
[2014-07-10 07:17] [PACMAN] upgraded webkitgtk (2.4.2-1 -> 2.4.3-2)
[2014-07-10 07:17] [PACMAN] upgraded gnome-online-accounts (3.12.2-1 -> 3.12.3-1)
[2014-07-10 07:17] [PACMAN] upgraded liboauth (1.0.1-1 -> 1.0.3-1)
[2014-07-10 07:17] [PACMAN] upgraded libgdata (0.15.0-1 -> 0.15.1-1)
[2014-07-10 07:17] [PACMAN] upgraded evolution-data-server (3.12.2-1 -> 3.12.3-1)
[2014-07-10 07:17] [PACMAN] upgraded folks (0.9.7-1 -> 0.9.7.1-1)
[2014-07-10 07:17] [PACMAN] upgraded telepathy-farstream (0.6.0-1 -> 0.6.1-1)
[2014-07-10 07:17] [PACMAN] upgraded telepathy-logger (0.8.0-1 -> 0.8.0-2)
[2014-07-10 07:17] [PACMAN] upgraded empathy (3.12.2-1 -> 3.12.4-1)
[2014-07-10 07:17] [PACMAN] upgraded ffmpeg-compat (1:0.10.12-2 -> 1:0.10.13-1)
[2014-07-10 07:17] [PACMAN] upgraded file (5.18-1 -> 5.19-1)
[2014-07-10 07:17] [ALPM] warning: /etc/group installed as /etc/group.pacnew
[2014-07-10 07:17] [ALPM] warning: /etc/passwd installed as /etc/passwd.pacnew
[2014-07-10 07:17] [ALPM] warning: /etc/shadow installed as /etc/shadow.pacnew
[2014-07-10 07:17] [PACMAN] upgraded filesystem (2013.05-2 -> 2014.06-2)
[2014-07-10 07:17] [PACMAN] upgraded filezilla (3.8.0-1 -> 3.8.1-1)
[2014-07-10 07:17] [PACMAN] upgraded findutils (4.4.2-5 -> 4.4.2-6)
[2014-07-10 07:17] [PACMAN] upgraded mozilla-common (1.4-3 -> 1.4-4)
[2014-07-10 07:17] [PACMAN] upgraded firefox (29.0.1-2 -> 30.0-1)
[2014-07-10 07:17] [PACMAN] upgraded flashplugin (11.2.202.359-1 -> 11.2.202.394-1)
[2014-07-10 07:17] [PACMAN] upgraded freerdp (1.0.2-5 -> 1.0.2-6)
[2014-07-10 07:17] [PACMAN] upgraded fuse-exfat (1.0.1-1 -> 1.0.1-2)
[2014-07-10 07:17] [PACMAN] upgraded gavl (1.4.0-1 -> 1.4.0-2)
[2014-07-10 07:17] [PACMAN] upgraded gc (7.4.0-3 -> 7.4.2-1)
[2014-07-10 07:17] [PACMAN] upgraded gcc-multilib (4.9.0-3 -> 4.9.0-5)
[2014-07-10 07:17] [PACMAN] upgraded geoclue (0.12.99-1 -> 0.12.99-2)
[2014-07-10 07:17] [PACMAN] upgraded jre7-openjdk-headless (7.u55_2.4.7-1 -> 7.u60_2.5.0-3)
[2014-07-10 07:17] [PACMAN] upgraded jre7-openjdk (7.u55_2.4.7-1 -> 7.u60_2.5.0-3)
[2014-07-10 07:17] [PACMAN] upgraded geogebra (4.4.35.0-1 -> 4.4.37.0-1)
[2014-07-10 07:17] [PACMAN] upgraded geoip-database (20140304-1 -> 20140604-1)
[2014-07-10 07:17] [PACMAN] upgraded gettext (0.18.3.2-1 -> 0.19.1-1)
[2014-07-10 07:17] [PACMAN] upgraded git (1.9.3-1 -> 2.0.1-1)
[2014-07-10 07:17] [PACMAN] upgraded glu (9.0.0-2 -> 9.0.0-3)
[2014-07-10 07:17] [PACMAN] upgraded gmime (2.6.20-1 -> 2.6.20-2)
[2014-07-10 07:17] [PACMAN] upgraded gnome-calculator (3.12.1-1 -> 3.12.3-1)
[2014-07-10 07:17] [PACMAN] upgraded rarian (0.8.1-3 -> 0.8.1-4)
[2014-07-10 07:17] [PACMAN] upgraded gnome-doc-utils (0.20.10-1 -> 0.20.10-2)
[2014-07-10 07:17] [PACMAN] upgraded gnome-icon-theme-symbolic (3.12.0-1 -> 3.12.0-2)
[2014-07-10 07:17] [PACMAN] upgraded gnome-icon-theme (3.12.0-1 -> 3.12.0-2)
[2014-07-10 07:17] [PACMAN] upgraded gnome-menus (3.10.1-1 -> 3.10.1-2)
[2014-07-10 07:17] [PACMAN] upgraded gnome-mime-data (2.18.0-6 -> 2.18.0-7)
[2014-07-10 07:17] [PACMAN] upgraded vte-common (0.36.2-1 -> 0.36.3-1)
[2014-07-10 07:17] [PACMAN] upgraded vte3 (0.36.2-1 -> 0.36.3-1)
[2014-07-10 07:17] [PACMAN] upgraded gnome-terminal (3.12.2-1 -> 3.12.3-1)
[2014-07-10 07:17] [PACMAN] upgraded gnome-user-docs (3.12.1-1 -> 3.12.2-1)
[2014-07-10 07:17] [PACMAN] upgraded gnome-user-share (3.10.2-2 -> 3.10.2-3)
[2014-07-10 07:17] [PACMAN] upgraded goocanvas1 (1.0.0-2 -> 1.0.0-3)
[2014-07-10 07:17] [PACMAN] upgraded gparted (0.18.0-1 -> 0.19.0-1)
[2014-07-10 07:17] [PACMAN] upgraded grep (2.19-1 -> 2.20-1)
[2014-07-10 07:17] [PACMAN] upgraded grub (1:2.02.beta2-3 -> 1:2.02.beta2-4)
[2014-07-10 07:17] [PACMAN] upgraded gst-libav (1.2.4-1 -> 1.2.4-2)
[2014-07-10 07:17] [PACMAN] upgraded gstreamer0.10-python (0.10.22-1 -> 0.10.22-2)
[2014-07-10 07:17] [PACMAN] upgraded pangox-compat (0.0.2-1 -> 0.0.2-2)
[2014-07-10 07:17] [PACMAN] upgraded gtkglext (1.2.0-9 -> 1.2.0-10)
[2014-07-10 07:17] [PACMAN] upgraded hardinfo (0.5.1-5 -> 0.5.1-6)
[2014-07-10 07:17] [PACMAN] upgraded hunspell-en (7.1-2 -> 7.1-3)
[2014-07-10 07:17] [PACMAN] upgraded hyphen (2.8.6-1 -> 2.8.7-2)
[2014-07-10 07:17] [PACMAN] upgraded i2c-tools (3.1.0-5 -> 3.1.1-1)
[2014-07-10 07:17] [PACMAN] upgraded xcb-util-keysyms (0.3.9-1 -> 0.3.9-2)
[2014-07-10 07:17] [PACMAN] upgraded i3-wm (4.7.2-1 -> 4.8-3)
[2014-07-10 07:17] [PACMAN] upgraded perl-xml-parser (2.41-4 -> 2.41-5)
[2014-07-10 07:17] [PACMAN] upgraded perl-xml-simple (2.20-1 -> 2.20-2)
[2014-07-10 07:17] [PACMAN] upgraded icon-naming-utils (0.8.90-2 -> 0.8.90-3)
[2014-07-10 07:17] [PACMAN] upgraded imlib2 (1.4.6-1 -> 1.4.6-3)
[2014-07-10 07:17] [PACMAN] upgraded poppler-glib (0.26.1-1 -> 0.26.2-1)
[2014-07-10 07:17] [PACMAN] upgraded inkscape (0.48.4-15 -> 0.48.5-2)
[2014-07-10 07:17] [PACMAN] upgraded inputproto (2.3-1 -> 2.3.1-1)
[2014-07-10 07:17] [PACMAN] upgraded intel-tbb (4.2_20140122-1 -> 4.2_20140601-1)
[2014-07-10 07:17] [PACMAN] upgraded intltool (0.50.2-1 -> 0.50.2-2)
[2014-07-10 07:17] [PACMAN] upgraded jdk7-openjdk (7.u55_2.4.7-1 -> 7.u60_2.5.0-3)
[2014-07-10 07:17] [PACMAN] upgraded libkactivities4 (4.13.1-3 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded kactivities4 (4.13.1-3 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded oxygen-icons (4.13.1-1 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded kdebase-runtime (4.13.1-3 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded ladspa (1.13-4 -> 1.13-5)
[2014-07-10 07:17] [PACMAN] upgraded leafpad (0.8.18.1-3 -> 0.8.18.1-4)
[2014-07-10 07:17] [PACMAN] upgraded lib32-alsa-lib (1.0.27.2-1 -> 1.0.28-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-alsa-plugins (1.0.27-1 -> 1.0.28-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-bzip2 (1.0.6-1 -> 1.0.6-2)
[2014-07-10 07:17] [PACMAN] upgraded lib32-gettext (0.18.3.2-1 -> 0.19.1-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-harfbuzz (0.9.26-2 -> 0.9.29-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-libdbus (1.8.0-1 -> 1.8.4-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-libffi (3.0.13-1 -> 3.1-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-libgpg-error (1.12-1 -> 1.13-1)
[2014-07-10 07:17] [PACMAN] upgraded libice (1.0.8-2 -> 1.0.9-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-libice (1.0.8-1 -> 1.0.9-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-libpng (1.6.10-1 -> 1.6.12-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-libvdpau (0.7-2 -> 0.8-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-llvm-libs (3.4.1-1 -> 3.4.2-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-systemd (212-1 -> 214-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-mesa (10.1.4-1 -> 10.2.3-1)
[2014-07-10 07:17] [PACMAN] installed freeglut (2.8.1-1)
[2014-07-10 07:17] [PACMAN] upgraded mesa-demos (8.1.0-2 -> 8.2.0-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-mesa-demos (8.1.0-3 -> 8.2.0-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-nvidia-utils (337.19-1 -> 337.25-2)
[2014-07-10 07:17] [PACMAN] upgraded lib32-nvidia-libgl (337.19-1 -> 337.25-2)
[2014-07-10 07:17] [PACMAN] upgraded lib32-openssl (1.0.1.g-1 -> 1.0.1.h-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-sqlite (3.8.4.3-1 -> 3.8.5-1)
[2014-07-10 07:17] [PACMAN] upgraded lib32-util-linux (2.24.1-1 -> 2.24.2-1)
[2014-07-10 07:17] [PACMAN] upgraded libatasmart (0.19-2 -> 0.19-3)
[2014-07-10 07:17] [PACMAN] installed librevenge (0.0.1-2)
[2014-07-10 07:17] [PACMAN] upgraded libwpd (0.9.9-1 -> 0.10.0-1)
[2014-07-10 07:17] [PACMAN] upgraded libcdr (0.0.16-2 -> 0.1.0-1)
[2014-07-10 07:17] [PACMAN] upgraded libcroco (0.6.8-1 -> 0.6.8-2)
[2014-07-10 07:17] [PACMAN] upgraded libdaemon (0.14-2 -> 0.14-3)
[2014-07-10 07:17] [PACMAN] upgraded libetonyek (0.0.4-1 -> 0.1.1-1)
[2014-07-10 07:17] [PACMAN] upgraded libevdev (1.2.1-1 -> 1.2.2-1)
[2014-07-10 07:17] [PACMAN] upgraded libgme (0.6.0-2 -> 0.6.0-3)
[2014-07-10 07:17] [PACMAN] upgraded libgnomecanvas (2.30.3-2 -> 2.30.3-3)
[2014-07-10 07:17] [PACMAN] upgraded libgnomeui (2.24.5-1 -> 2.24.5-2)
[2014-07-10 07:17] [PACMAN] upgraded libinput (0.1.0-1 -> 0.2.0-1)
[2014-07-10 07:17] [PACMAN] upgraded libmusicbrainz5 (5.0.1-1 -> 5.0.1-2)
[2014-07-10 07:17] [PACMAN] upgraded libkcddb (4.13.1-1 -> 4.13.2-1)
[2014-07-10 07:17] [PACMAN] upgraded libmicrohttpd (0.9.35-1 -> 0.9.37-1)
[2014-07-10 07:17] [PACMAN] upgraded libmms (0.6.2-1 -> 0.6.4-1)
[2014-07-10 07:17] [PACMAN] upgraded libmpcdec (1.2.6-3 -> 1.2.6-4)
[2014-07-10 07:17] [PACMAN] upgraded libmpeg2 (0.5.1-4 -> 0.5.1-5)
[2014-07-10 07:17] [PACMAN] upgraded libmspub (0.0.6-2 -> 0.1.1-1)
[2014-07-10 07:17] [PACMAN] upgraded libnfs (1.9.3-1 -> 1.9.4-1)
[2014-07-10 07:17] [PACMAN] upgraded libodfgen (0.0.4-1 -> 0.1.1-1)
[2014-07-10 07:17] [PACMAN] upgraded libproxy (0.4.11-2 -> 0.4.11-4)
[2014-07-10 07:17] [PACMAN] upgraded libreoffice-en-GB (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-common (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-base (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded lpsolve (5.5.2.0-2 -> 5.5.2.0-3)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-calc (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-draw (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-impress (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-math (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded postgresql-libs (9.3.4-1 -> 9.3.4-2)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-postgresql-connector (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded zip (3.0-3 -> 3.0-4)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-sdk (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-sdk-doc (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libreoffice-writer (4.2.4-1 -> 4.2.5-1)
[2014-07-10 07:18] [PACMAN] upgraded libsigc++ (2.3.1-1 -> 2.3.1-2)
[2014-07-10 07:18] [PACMAN] upgraded libspectre (0.2.7-1 -> 0.2.7-2)
[2014-07-10 07:18] [PACMAN] upgraded libspiro (20071029-3 -> 1:0.2-1)
[2014-07-10 07:18] [PACMAN] upgraded libtiger (0.3.4-3 -> 0.3.4-4)
[2014-07-10 07:18] [PACMAN] upgraded libtracker-sparql (1.0.1-1 -> 1.0.1-2)
[2014-07-10 07:18] [PACMAN] upgraded libwpg (0.2.2-2 -> 0.3.0-1)
[2014-07-10 07:18] [PACMAN] upgraded libvisio (0.0.31-3 -> 0.1.0-1)
[2014-07-10 07:18] [PACMAN] upgraded libvisual (0.4.0-4 -> 0.4.0-5)
[2014-07-10 07:18] [PACMAN] upgraded libwps (0.2.9-1 -> 0.3.0-1)
[2014-07-10 07:18] [PACMAN] upgraded xfconf (4.10.0-3 -> 4.10.0-4)
[2014-07-10 07:18] [PACMAN] upgraded libxfce4ui (4.10.0-1 -> 4.10.0-2)
[2014-07-10 07:18] [PACMAN] upgraded libxklavier (5.3-1 -> 5.4-1)
[2014-07-10 07:18] [PACMAN] upgraded licenses (20130203-1 -> 20140629-1)
[2014-07-10 07:18] [PACMAN] upgraded linux-firmware (20140316.dec41bc-1 -> 20140603.a4f3bc0-1)
[2014-07-10 07:18] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-07-10 07:18] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Starting build: 3.15.4-1-ARCH
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Starting build: 3.15.4-1-ARCH
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-07-10 07:18] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-07-10 07:18] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-07-10 07:18] [PACMAN] upgraded linux (3.14.4-1 -> 3.15.4-1)
[2014-07-10 07:18] [PACMAN] upgraded man-pages (3.67-1 -> 3.69-1)
[2014-07-10 07:18] [PACMAN] upgraded mcpp (2.7.2-4 -> 2.7.2-5)
[2014-07-10 07:18] [PACMAN] upgraded mdadm (3.3-2 -> 3.3.1-2)
[2014-07-10 07:18] [PACMAN] upgraded mkvtoolnix-cli (6.9.1-1 -> 7.0.0-1)
[2014-07-10 07:18] [PACMAN] upgraded mpfr (3.1.2.p8-1 -> 3.1.2.p10-1)
[2014-07-10 07:18] [PACMAN] upgraded nano (2.2.6-2 -> 2.2.6-3)
[2014-07-10 07:18] [PACMAN] upgraded netctl (1.7-1 -> 1.8-1)
[2014-07-10 07:18] [PACMAN] upgraded networkmanager (0.9.8.10-1 -> 0.9.8.10-3)
[2014-07-10 07:18] [PACMAN] upgraded nspr (4.10.5-1 -> 4.10.6-1)
[2014-07-10 07:18] [PACMAN] upgraded ntp (4.2.7.p441-1 -> 4.2.7.p446-1)
[2014-07-10 07:18] [PACMAN] upgraded nvidia (337.19-1 -> 337.25-4)
[2014-07-10 07:18] [PACMAN] upgraded xine-lib (1.2.5-1 -> 1.2.6-1)
[2014-07-10 07:18] [PACMAN] upgraded opencv (2.4.8-2 -> 2.4.9-1)
[2014-07-10 07:18] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2014-07-10 07:18] [PACMAN] upgraded pacman-mirrorlist (20140405-1 -> 20140706-1)
[2014-07-10 07:18] [PACMAN] upgraded phonon-qt5-gstreamer (4.7.1-1 -> 4.7.2-1)
[2014-07-10 07:18] [PACMAN] upgraded pkg-config (0.28-1 -> 0.28-2)
[2014-07-10 07:18] [PACMAN] upgraded pm-quirks (0.20100619-3 -> 0.20100619-4)
[2014-07-10 07:18] [PACMAN] upgraded protobuf (2.5.0-3 -> 2.5.0-4)
[2014-07-10 07:18] [PACMAN] upgraded pulseaudio-alsa (2-2 -> 2-3)
[2014-07-10 07:18] [PACMAN] upgraded pygoocanvas (0.14.1-5 -> 0.14.1-6)
[2014-07-10 07:18] [PACMAN] upgraded pyorbit (2.24.0-4 -> 2.24.0-5)
[2014-07-10 07:18] [PACMAN] upgraded python-setuptools (3.6-1 -> 1:5.4.1-1)
[2014-07-10 07:18] [PACMAN] upgraded python2-gnomecanvas (2.28.1-8 -> 2.28.1-9)
[2014-07-10 07:18] [PACMAN] upgraded python2-bonobo (2.28.1-8 -> 2.28.1-9)
[2014-07-10 07:18] [PACMAN] upgraded python2-cffi (0.8.2-4 -> 0.8.6-1)
[2014-07-10 07:18] [PACMAN] upgraded python2-docutils (0.11-2 -> 0.12-1)
[2014-07-10 07:18] [PACMAN] upgraded python2-gconf (2.28.1-8 -> 2.28.1-9)
[2014-07-10 07:18] [PACMAN] upgraded python2-gnomevfs (2.28.1-8 -> 2.28.1-9)
[2014-07-10 07:18] [PACMAN] upgraded python2-libgnome (2.28.1-8 -> 2.28.1-9)
[2014-07-10 07:18] [PACMAN] upgraded python2-mako (0.9.1-2 -> 1.0.0-1)
[2014-07-10 07:18] [PACMAN] upgraded python2-setuptools (3.6-1 -> 1:5.4.1-1)
[2014-07-10 07:18] [PACMAN] upgraded xcb-util (0.3.9-1 -> 0.3.9-2)
[2014-07-10 07:18] [PACMAN] upgraded xcb-util-image (0.3.9-1 -> 0.3.9-2)
[2014-07-10 07:18] [PACMAN] upgraded qt5-base (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded qt5-xmlpatterns (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded qt5-declarative (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded qt5-location (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded qt5-script (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded qt5-sensors (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded qt5-webkit (5.3.0-3 -> 5.3.1-1)
[2014-07-10 07:18] [PACMAN] upgraded randrproto (1.4.0-1 -> 1.4.0-2)
[2014-07-10 07:18] [PACMAN] upgraded recordproto (1.14.2-1 -> 1.14.2-2)
[2014-07-10 07:18] [PACMAN] upgraded remmina (1.0.0-11 -> 1.0.0-12)
[2014-07-10 07:18] [PACMAN] upgraded renderproto (0.11.1-2 -> 0.11.1-3)
[2014-07-10 07:18] [PACMAN] upgraded s-nail (14.6.4-1 -> 14.7.1-1)
[2014-07-10 07:18] [PACMAN] upgraded samba (4.1.7-1 -> 4.1.9-1)
[2014-07-10 07:18] [PACMAN] upgraded scrnsaverproto (1.2.2-1 -> 1.2.2-2)
[2014-07-10 07:18] [PACMAN] upgraded sdl_mixer (1.2.12-3 -> 1.2.12-4)
[2014-07-10 07:18] [PACMAN] upgraded sg3_utils (1.38-1 -> 1.39-1)
[2014-07-10 07:18] [PACMAN] upgraded shntool (3.0.10-2 -> 3.0.10-3)
[2014-07-10 07:18] [PACMAN] installed lib32-json-c (0.12-1)
[2014-07-10 07:18] [PACMAN] installed lib32-libasyncns (0.8-7)
[2014-07-10 07:18] [PACMAN] installed lib32-libcap (2.24-1)
[2014-07-10 07:18] [PACMAN] installed lib32-libxtst (1.2.2-1)
[2014-07-10 07:18] [PACMAN] installed lib32-libogg (1.3.1-1)
[2014-07-10 07:18] [PACMAN] installed lib32-flac (1.3.0-1)
[2014-07-10 07:18] [PACMAN] installed lib32-libvorbis (1.3.4-1)
[2014-07-10 07:18] [PACMAN] installed lib32-libsndfile (1.0.25-3)
[2014-07-10 07:18] [PACMAN] installed lib32-libpulse (5.0-1)
[2014-07-10 07:18] [ALPM-SCRIPTLET] Important update note: Since Skype 4.3, only PulseAudio is supported.
[2014-07-10 07:18] [ALPM-SCRIPTLET] That means you NEED a working PulseAudio setup to use Skype for voice chatting.
[2014-07-10 07:18] [ALPM-SCRIPTLET] If you get distorted sound in skype, try adding PULSE_LATENCY_MSEC=60 to your
[2014-07-10 07:18] [ALPM-SCRIPTLET] env before starting skype. Something like 'export PULSE_LATENCY_MSEC=60' in .bashrc, for example.
[2014-07-10 07:18] [PACMAN] upgraded skype (4.2.0.13-4 -> 4.3.0.37-3)
[2014-07-10 07:18] [PACMAN] upgraded slim (1.3.6-4 -> 1.3.6-5)
[2014-07-10 07:18] [PACMAN] upgraded sound-theme-freedesktop (0.8-1 -> 0.8-2)
[2014-07-10 07:18] [PACMAN] upgraded swig (3.0.0-1 -> 3.0.2-1)
[2014-07-10 07:18] [PACMAN] upgraded sysfsutils (2.1.0-8 -> 2.1.0-9)
[2014-07-10 07:18] [PACMAN] upgraded systemd-sysvcompat (212-3 -> 214-2)
[2014-07-10 07:18] [PACMAN] upgraded thunar-volman (0.8.0-1 -> 0.8.0-2)
[2014-07-10 07:18] [PACMAN] upgraded thunderbird (24.5.0-1 -> 24.6.0-1)
[2014-07-10 07:18] [PACMAN] upgraded tracker (1.0.1-1 -> 1.0.1-2)
[2014-07-10 07:18] [PACMAN] upgraded tzdata (2014c-1 -> 2014e-1)
[2014-07-10 07:18] [PACMAN] upgraded unrar (1:5.1.5-1 -> 1:5.1.6-1)
[2014-07-10 07:18] [PACMAN] upgraded unzip (6.0-6 -> 6.0-7)
[2014-07-10 07:18] [PACMAN] upgraded vi (1:050325-3 -> 1:050325-4)
[2014-07-10 07:18] [PACMAN] upgraded vim-runtime (7.4.307-3 -> 7.4.335-4)
[2014-07-10 07:18] [PACMAN] upgraded vim (7.4.307-3 -> 7.4.335-4)
[2014-07-10 07:18] [PACMAN] upgraded vlc (2.1.4-2 -> 2.1.5-1)
[2014-07-10 07:18] [PACMAN] upgraded vorbis-tools (1.4.0-3 -> 1.4.0-4)
[2014-07-10 07:18] [PACMAN] upgraded webrtc-audio-processing (0.1-1 -> 0.1-2)
[2014-07-10 07:18] [PACMAN] upgraded wine (1.7.19-3 -> 1.7.21-1)
[2014-07-10 07:18] [PACMAN] upgraded xbmc (13.0-5 -> 13.1-3)
[2014-07-10 07:18] [PACMAN] upgraded xcb-util-renderutil (0.3.8-1 -> 0.3.9-1)
[2014-07-10 07:18] [PACMAN] upgraded xdg-user-dirs-gtk (0.10-1 -> 0.10-2)
[2014-07-10 07:18] [PACMAN] upgraded xf86-video-modesetting (0.8.1-2 -> 0.9.0-1)
[2014-07-10 07:18] [PACMAN] upgraded xf86dgaproto (2.1-2 -> 2.1-3)
[2014-07-10 07:18] [PACMAN] upgraded xf86vidmodeproto (2.3.1-2 -> 2.3.1-3)
[2014-07-10 07:18] [PACMAN] upgraded xfsprogs (3.1.11-2 -> 3.2.0-1)
[2014-07-10 07:18] [PACMAN] upgraded xineramaproto (1.2.1-2 -> 1.2.1-3)
[2014-07-10 07:18] [PACMAN] upgraded youtube-dl (2014.05.19-1 -> 2014.06.26-1)
Does anyone know what's going on?
Is there any more information I can provide that would assist diagnosis?

Hi, thanks for the reply
/etc/libreoffice/bootstraprc looks like this:
[ErrorReport]
ErrorReportPort=80
ErrorReportServer=report.libreoffice.org
[Bootstrap]
InstallMode=<installmode>
ProductKey=LibreOffice 4.2
UserInstallation=$SYSUSERCONFIG/libreoffice/4
Is this of any use?
EDIT: through finding more applications that don't work I'm beiginning to suspect it is something to do with GTK. QT apps seem unaffected whereas GTK apps are all a bit upset. I can, for example, access my home directory just fine in dino (qt) and ranger (ncurses).
EDIT 2: It appears only gtk2 apps are affected. gtk3 apps seem OK
EDIT 3: I never found a solution, I reformatted the partition and started again (it was only my home partition). I am now back to using ext4.
Last edited by gav989 (2014-08-19 11:09:53)

The stavfs() hangs for stale NFS mount

Hi,
When the remote server from where a NFS file system is mounted is down, we get the stale NFS
mount error.
An application that just reads the entries of /etc/mnttab and does the statvfs() on all the file systems will
hang infinitely. The control is within the statvfs() call. The application goes into a uninterruptible sleep mode. Signals like SIGALARM or SIGPIPE are not handled. Only the signals like SIGTERM, SIGHUP,
SIGKILL are getting handled.
One solution which we considered was to check for the availability of the remote host before calling the
statvfs(). This can be done by sending ICMP packets to the remote host. But this method will not work
on the servers which restricts the ICMP packets (for some security reasons).
Is there any other way to avoid this problem?
Thanks in advance.
Best Regards,
Rams.

And again. Since 280 people have looked at my post and not one could help me I assume that there's no solution to my problem?
If that's true I would appreciate it if you tell me, and if there's a solution you know, or if you have any idea how to solve this, please reply.
kthxbai

Server 2012 File Server Cluster Shadow Copies Disappear Some Time After Failover

Hello,
I've seen similar questions posted on here before however I have yet to find a solution that worked for us so I'm adding my process in hopes someone can point out where I went wrong.
The problem: After failover, shadow copies are only available for a short time on the secondary server. Before the task to create new shadow copies happens the shadow copies are deleted. Failing back shows them missing on the primary server as
well when this happens.
We have a 2 node (hereafter server1 and server2) cluster with a quorum disk. There are 8 disk resources which are mapped to the cluster via iScsi. 4 of these disks are setup as storage and the other 4 are currently set up as shadow copy volumes
for their respective storage volume.
Previously we weren't using separate shadow copy volumes and seeing the same issue described in the topic title. I followed two other topics on here that seemed close and then setup the separate shadow copy volumes however it has yet to alleviate the
issue. These are the two other topics :
Topic 1: https://social.technet.microsoft.com/Forums/windowsserver/en-US/ba0d2568-53ac-4523-a49e-4e453d14627f/failover-cluster-server-file-server-role-is-clustered-shadow-copies-do-not-seem-to-travel-to?forum=winserverClustering
Topic 2: https://social.technet.microsoft.com/Forums/windowsserver/en-US/c884c31b-a50e-4c9d-96f3-119e347a61e8/shadow-copies-missing-after-failover-on-2008-r2-cluster
After reading both of those topics I did the following:
1) Add the 4 new volumes to the cluster for shadow copies
2) Made each storage volume dependent on it's shadow copy volume in FCM
3) Went to the currently active node directly and opened up "My Computer", I then went to the properties of each storage volume and set up shadow copies to go to the respective shadow copy volume drive letter with correct size for spacing, etc.
4) I then went back to FCM and right clicked on the corresponding storage volume and choose "Configure Shadow Copy" and set the schedule for 12:00 noon and 5:00 PM.
5) I noticed that on the nodes the task was created and that the task would failover between the nodes and appeared correct.
6) Everything appears to failover correctly, all volumes come up, drive letters are same, shadow copy storage settings are the same, and 4 scheduled tasks for shadow copy appear on the current node after failover.
Thinking everything was setup according to best practice I did some testing by changing file contents throughout the day making sure that previous versions were created as scheduled on server1. I then rebooted Server1 to simulate failure. Server2
picked up the role within about 10 seconds and files were avaiable. I checked and I could still see previous versions for the files after failover that were created on server1. Unfortunately that didn't last as the next day before noon I was going
to make more changes to files to ensure that not only could we see the shadow copies that were created when Server1 owned the file server role but also that the copies created on Server2 would be seen on failback. I was disappointed to discover that
the shadow copies were all gone and failing back didn't produce them either.
Does anyone have any insight into this issue? I must be missing a switch somewhere or perhaps this isn't even possible with our cluster type based on this: http://technet.microsoft.com/en-us/library/cc779378%28v=ws.10%29.aspx
Now here's an interesting part, shadow copies on 1 of our 4 volumes have been retained from both nodes through the testing, but I can't figure out what makes it different though I do suspect that perhaps the "Disk#s" in computer management / disk
management perhaps need to be the same between servers? For example, on server 1 the disk #s for cluster volume 1 might be "Disk4" but on server 2 the same volume might be called "Disk7", however I think that operations like this
and shadow copy are based on the disk GUID and perhaps this shouldn't matter.
Edit, checked on the disk numbers, I see no correlation between what I'm seeing in shadow copy and what is happening to the numbers. All other items, quotas, etc fail and work correctly despite these diffs:
Disk Numbers on Server 1:
Format: "shadow/storerelation volume = Disk Number"
aHome storage1 = 16
aShared storage2 = 09
sHome storage3 = 01
sShared storage4 = 04
aHome shadow1 = 10
aShared shadow2 = 11
sHome shadow3 = 02
sShared shadow4 = 05
Disk numbers on Server 2:
aHome storage1 = 16 (SAME)
aShared storage2 = 04 (DIFF)
sHome storage3 = 05 (DIFF)
sShared storage4 = 08 (DIFF)
aHome shadow1 = 10 (SAME)
aShared shadow2 = 11 (SAME)
sHome shadow3 = 06 (DIFF)
sShared shadow4 = 09 (DIFF)
Thanks in advance for your assistance/guidance on this matter!

Hello Alex,
Thank you for your reply. I will go through your questions in order as best I can, though I'm not the backup expert here.
1) "Did you see any event ID when the VSS fail?
please offer us more information about your environment, such as what type backup you are using the soft ware based or hard ware VSS device."
I saw a number of events on inspection. Interestingly enough, the event ID 60 issues did not occur on the drive where shadow copies did remain after the two reboots. I'm putting my event notes in a code block to try to preserve formatting/readability.
I've written down events from both server 1 and 2 in this code block, documenting the first reboot causing the role to move to server 2 and then the second reboot going back to server 1:
JANUARY 2
9:34:20 PM - Server 1 - Event ID: 1074 - INFO - Source: User 32 - Standard reboot request from explorer.exe (Initiated by me)
9:34:21 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the running state."
9:34:21 PM - Server 1 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy49
F:
T:
The locale specific resource for the desired message is not present"
9:34:21 PM - Server 1 - Event ID 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy1
H:
V:
The locale specific resource for the desired message is not present"
***The above event repeats with only the number changing, drive letters stay same, citing VolumeShadowCopy# numbers 6, 13, 18, 22, 27, 32, 38, 41, 45, 51,
9:34:21 PM - Server 1 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy4
E:
S:
The locale specific resource for the desired message is not present"
***The above event repeats with only the number changing, drive letters stay same, citing VolumeShadowCopy# numbers 5, 10, 19, 21, 25, 29, 37, 40, 46, 48, 48
9:34:28 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Legacy Network Service service entered the stopped state."
9:34:28 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the stopped state.""
9:34:29 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Client Service service entered the stopped state."
9:34:30 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Discovery Framework service entered the stopped state."
10:44:07 PM - Server 2 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the running state."
10:44:08 PM - Server 2 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Microsoft Software Shadow Copy Provider service entered the running state."
10:45:01 PM - Server 2 - Event ID: 48 - ERROR - Source: bxois - "Target failed to respond in time to a NOP request."
10:45:01 PM - Server 2 - Event ID: 20 - ERROR - Source: bxois - "Connection to the target was lost. The initiator will attempt to retry the connection."
10:45:01 PM - Server 2 - Event ID: 153 - WARN - Source: disk - "The IO operation at logical block address 0x146d2c580 for Disk 7 was retried."
10:45:03 PM - Server 2 - Event ID: 34 - INFO - Source: bxois - "A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data contains the target name."
JANUARY 3
At around 2:30 I reboot Server 2, seeing that shadow copy was missing after previous failure. Here are the relevant events from the flip back to server 1.
2:30:34 PM - Server 2 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy24
F:
T:
The locale specific resource for the desired message is not present"
2:30:34 PM - Server 2 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy23
E:
S:
The locale specific resource for the desired message is not present"
We are using Symantec NetBackup. The client agent is installed on both server1 and 2. We're backing them up based on the complete drive letter for each storage volume (this makes recovery easier). I believe this is what you would call "software
based VSS". We don't have the infrastructure/setup to do hardware based snapshots. The drives reside on a compellent san mapped to the cluster via iScsi.
2) "Confirm the following registry is exist:
- HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VSS\Settings"
The key is there, however the DWORD value is not, would that mean that the
default value is being used at this point?

How to restore standby from primary after failover.

HI we have a dr setup but the standby is provided archives through an application not the datagaurd.
So for applying application patch I cant switchover the database.
I have to shutdown the primary database and apply failover to the standby database to apply patch.
Can you please tell how can I restore my standby database to actual primary after failover.
As our actual activity will be in 2 weeks time. We want to apply patch on saturday.
DR DRILL is on 8th nov.

Your earlier statement "Can you please tell how can I restore my standby database to actual primary after failover"
means something different from "SO have to restore from cold backup of primary database"
What you seem to want is a procedure to recreate the Standby from a Backup of the Pirmary. (ie FROM Primary TO Standby).
You haven't specified your Oracle Version. DG has been available since 9i (was even backported to 8i) but I will presume that you are using 9i
You should follow the same process as used for the first creation of the standby, except that you don't have to repeat some of the setup steps (listener, tnsnames etc)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm#63563
Hemant K Chitale
http://hemantoracledba.blogspot.com

Creating standby DB after failover

Hi,
I have performed failover to my standby DB, now i need to re create the standby db for the new production.
But there is some confusion, because previously , in my production db_name and unique name was same, suppose
test1. And the db_name and unique_name for standby was test1 and test2. And i created standby db that way using test1 and test2 in log_archive_config.
After failover, the scenario changed , the production has two different value,db name test1 and db unique name test2. And i need create standby from this. It makes me confuse, how i will create standby? What will be the db unique name for new standby??
Please help me...
regards,

user8983130 wrote:
thanks.
we use db_unque_name in log_archive_config, ok???
and in the log_archive_dest_state_2, we service name..should it be necessary to be same of the db_unique_name???DB_NAME should be same across the primary and physical standby databases.
DB_UNIQUE_NAME choose different names for each database.
Service names whatever you use either in FAL_CLIENT/FAL_SERVER (or) DEST_n there is no relation with DB_NAME/DB_UNIQUE_NAME, Its just service name how you want to call.
HTH.

Certs did not working after failover

we had to failover our primary ace to secondary because primary ace crashed and we had to replace it. After we failied over certain certs stopped working
s
To fix this problem i had to remove the cert from ssl-proxy service and re-add it work. has anybody run into the problem like this? why would this fail after failover to secondary ace?

Oracle-User wrote:
Hi All
We are facing issues on FNDWRR.exe after we failover to DR apps servers. We are not able to retrieve concurrent job logs using web browser. Apache log file shows "Premature end of script headers" error message.
[Sat May 25 19:51:21 2013] [error] [client 10.64.224.134] [ecid: 1369507879:10.166.3.16:3282:0:13,0] Premature end of script headers: /d01/app/ebs/gap/apps_st/comn/webapps/oacore/html/bin/FNDWRR.exe
Any idea what can be causing this issue?
Thanks in advance!Did AutoConfig complete successfully?
Please relink FNDWRR.exe manually or via adadmin and check then.
Thanks,
Hussein

Enqueue replication server does not terminate after failover

Hi,
We are trying to setup high availability of enqueue server where in we have running enqueue server on node-A and ERS on node-B all the time.
Whenever enqueue is stopped on node-A, it automatically failovers on node-B but after replication of lock table, enqueue does not terminate the ERS running on node-B and as a result our enqueue and ERS both keeps running on the same host (Failover node-B) which should not be the case.
We havenu2019t configured polling in that scenario SAP note-1018968 depicts the same however this is applicable only for version-640 and 700.
Ideally when enqueue server switches to node-B, it should terminate the ERS on the same node after replication and then HA software would take care of its restart on node -A.
We have ERS running of version 701; could anyone please let me know if the same behaviour is common for 701 version as well?
Or there is any additional configuration to be done to make it working.
Thanks in advance.
Cheers !!!
Ashish

Hi Naveed,
Stopping ERS is suppose to be taken care by SAP only and not the HA software.
Once ERS stops on node -B there would be a fault reported and as a result HA software will restart the ERS on node A.
Please refer to a section of SAP Note 1018968 - 'Enqueue replication server does not terminate after failover'
"Therefore, the cluster software must only organise the restart of the replication server and does not need to do anything for the shutdown."
Another blog about the same:
http://www.symantec.com/connect/blogs/veritas-cluster-server-sap
- After the successful lock table takeover, the Enqueue Replication Server will fault on this node (initiated by SAP). Veritas Cluster Server recognizes this failure and initiates a failover to a remaining node to create SAP Enqueue redundancy again. The Enqueue Replication Server will receive the complete Enqueue table from the Enqueue Server (SCS) and later Enqueue lock updates in a synchronous fashion.
So it is nothing about HA software, it is the SAP which should control ERS on node-B.
Cheers !!!
Ashish

Enabling client side conflict handling after download of application

Hello,
we got a custom MI-Application in which we do conflict handling in the mobile application.
Now that we have over a hundred productive clients, we discovered that for many (not all) of the clients, the application level conflict handling is not enabled.
This seems to be due to the fact that the download (and install) of the application has been done while the setting for conflict handling was set to "Framework" instead of "Application".
The merepMeta.xml file however does contain the setting.
Is it possible and if yes how, to enable the application level conflict handling after installation?
best regards
Niels Oberbäumer

Hi Niels,
so I am confused. Lets first clarify if we talk about the same feature. The config handling I have in mind will be configured in MEREP_PD - Synchronizer Tab. There you have the settings available in the last column for each syncBO. One of the settings is called: SKIP_CONFLICT. By default it is not set, so the conflict handling takes place in the server and if the data was changed on Backend and client after the last sync, it throws an error.
To change this behaviour, you set the X into the colum in the SKIP_CONFLICT line and after that the middleware will handle the conflict and send the data through even it was changed on both sides.
Is this the thing we talk about? So what do you mean with MCD then? This handling has no setting in MCD and it should be independend from MEREPSBUILDEr.
Oh - I see now where it is stored... This value is does not get a reset with Client data reset - it comes from the MCD - no, sorry, in that case you need to uninstall and reinstall the App to get the value active on these devices. Sorry, but this is based on where the value is stored, there is not another way to reset that value unfortunately that I am aware of.
Regards,
Oliver

Can I know what is "Commit" after failover to Azure ?

Can I know what is "commit" after failover to Azure ?
I want to know "Commit" button of protected items.
SETUP RECOVERY: [ Between an on-premisese Hyper-V site and Azure ]
After failover from on-premis Hyper-V site to Azure, Protected item show "Commit" button.
"Commit" Jobs include "Prerequisite check" and "Commit".
Regards,
Yoshihiro Kawabata

In ASR Failover can be thought to be a 2 Phase Activity.
1) The Actual Failover where you bring up the VM in Azure using the latest recovery point available.
2) Committing the failover to that point.
Now the question in your mind will be why do we have these 2 Phases. The reason for this is as follows
Lets say you have configured your VM to have 24 recovery points with hourly App Consistent Snapshots. When you failover ASR automatically picks up the latest point in time that is available for failover (day 9:35 AM). Say you were not happy with that recovery
point because of some consistency issue in the application data, you can use the Change Recovery Point button(Gesture) in the ASR Portal to choose a different recovery point (say an app consistent snapshot from 9:00 AM that day) to perform the failover.
Once you are satisfied with the snapshot that is failed over in Azure you can hit the Commit Button. Once you hit the commit button you will not be able to change your Recovery Point.
Let me know if you have more questions.
Regards,
Anoop KV

Fatal Alert memorymgr.c, line:3751,free handle after hotsync

I have just reloaded my palm software and now I keep getting fatal alert memorymgr.c, line:3751,free handle after I hotsync. which is causing me to soft reset after hotsyncing.
I deleted add-it and reloaded, did the same with documents to go and yet I'm still having the error - Any ideas????!!!
Thanks....
Post relates to: Tungsten E2

- try to do a hard reset on the hh..
- look for your BACKUP folder and rename it to lets say, BACKUP1...backup folder is located at C: <program files <palm < USERNAME <backup....
- hotsync again..
hope it will solve your problem...

Server 2012 NFS - 10 minutes to resume after failover?

I've got a Server 2012 Core cluster running an HA file server role with the new NFS service. The role has two associated clustered disks. When I fail the role between nodes, it takes 10-12 minutes for the NFS service to come back online - it'll sit in 'Online
Pending' for several minutes, then transition to 'Failed', then finally come 'Online'. I've looked at the NFS event logs from the time period of failover and they look slightly odd. For example, in a failover at 18:41, I see this in the Admin log:
Time
EventID
Description
18:41:59
1076
Server for NFS successfully started virtual server {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}
18:50:47
2000
A new NFS share was created. Path:Y:\msd_build, Alias:msd_build, ShareFlags:0xC0AE00, Encoding:7, SecurityFlavorFlags:0x2, UnmappedUid:4294967294, UnmappedGid:4294967294
18:50:47
2000
A new NFS share was created. Path:Z:\eas_build, Alias:eas_build, ShareFlags:0xC0AE00, Encoding:7, SecurityFlavorFlags:0x2, UnmappedUid:4294967294, UnmappedGid:4294967294
18:50:47
2002
A previously shared NFS folder was unshared. Path:Y:\msd_build, Alias:msd_build
18:50:47
2002
A previously shared NFS folder was unshared. Path:Z:\eas_build, Alias:eas_build
18:50:47
1078
NFS virtual server {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd} is stopped
18:51:47
1076
Server for NFS successfully started virtual server {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}
18:51:47
2000
A new NFS share was created. Path:Y:\msd_build, Alias:msd_build, ShareFlags:0xC0AE00, Encoding:7, SecurityFlavorFlags:0x2, UnmappedUid:4294967294, UnmappedGid:4294967294
18:51:47
2000
A new NFS share was created. Path:Z:\eas_build, Alias:eas_build, ShareFlags:0xC0AE00, Encoding:7, SecurityFlavorFlags:0x2, UnmappedUid:4294967294, UnmappedGid:4294967294
In the Operational log, I see this:
Time
EventID
Description
18:41:51
1108
Server for NFS received an arrival notification for volume \Device\HarddiskVolume11.
18:41:51
1079
NFS virtual server successfully created volume \Device\HarddiskVolume11 (ResolvedPath \Device\HarddiskVolume11\, VolumeId {69d0efca-c067-11e1-bbc5-005056925169}).
18:41:58
1108
Server for NFS received an arrival notification for volume \Device\HarddiskVolume9.
18:41:58
1079
NFS virtual server successfully created volume \Device\HarddiskVolume9 (ResolvedPath \Device\HarddiskVolume9\, VolumeId {c5014a4a-d0b8-11e1-bbcb-005056925167}).
18:41:59
1079
NFS virtual server successfully created volume \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\ (ResolvedPath \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\, VolumeId {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}).
18:41:59
1105
Server for NFS started volume \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\ (ResolvedPath \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\, VolumeId {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}).
18:41:59
1079
NFS virtual server successfully created volume \DosDevices\Y:\ (ResolvedPath \Device\HarddiskVolume9\, VolumeId {c5014a4a-d0b8-11e1-bbcb-005056925167}).
18:44:06
1116
Server for NFS discovered volume Z: (ResolvedPath \Device\HarddiskVolume11\, VolumeId {69d0efca-c067-11e1-bbc5-005056925169}) and added it to the known volume table.
18:50:47
1116
Server for NFS discovered volume Y: (ResolvedPath \Device\HarddiskVolume9\, VolumeId {c5014a4a-d0b8-11e1-bbcb-005056925167}) and added it to the known volume table.
18:50:47
1081
NFS virtual server successfully destroyed volume \DosDevices\Y:\.
18:50:47
1105
Server for NFS started volume Y: (ResolvedPath \Device\HarddiskVolume9\, VolumeId {c5014a4a-d0b8-11e1-bbcb-005056925167}).
18:50:47
1105
Server for NFS started volume Z: (ResolvedPath \Device\HarddiskVolume11\, VolumeId {69d0efca-c067-11e1-bbc5-005056925169}).
18:50:48
1106
Server for NFS stopped volume \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\ (ResolvedPath \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\, VolumeId {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}).
18:50:48
1081
NFS virtual server successfully destroyed volume \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\.
18:51:47
1079
NFS virtual server successfully created volume \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\ (ResolvedPath \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\, VolumeId {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}).
18:51:47
1105
Server for NFS started volume \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\ (ResolvedPath \Pfs\Volume{fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}\, VolumeId {fc4bf5c0-c2c9-430f-8c44-4220ff6655bd}).
From this, I'm not sure what's going on between 18:41:59 and 18:44:06, between 18:44:06 and 18:50:47 or between 18:50:48 and 18:51:47. What's the NFS volume discovery doing and why does it take so long?
Does anyone have any thoughts as to where I could start looking to work out what's happening here? Is there any tracing that can be enabled for the NFS services to indicate what's going on?
Thanks in advance!

I was able to get some downtime this afternoon so I tried
deleting the NFS share in question and recreating it
deleting all the NFS shares on the clustered file server (thus removing the NFS Server resource) and recreating them
deleting all the NFS shares and the ._nfs folder from all the associated drives and recreating them
deleting the clustered file server altogether, shutting down the cluster, starting it back up and recreating the file server.
None of these made any difference - this particular NFS resource still took about 10 minutes to return to service. I'm therefore supposing it's some aspect of the disk or the data on it that NFS is taking a long time to enumerate, but it's annoying that
I don't have any visibility into what's going on. I might try asking this same question in the MS partner forums to see if I get any answers there...

How to re-build the Production database after failover

We have performed a failover in our environment by the below method . It was worst we are not able to bring up the production the only choice left over is failover.
We have enabled the flash back and created a checkpoint then failover.
SQL> select max(sequence#) from v$log_history;
MAX(SEQUENCE#)
9221
SQL> alter system set db_recovery_file_dest_size=14G;
System altered.
SQL> alter system set db_recovery_file_dest='/u01/oradata/flashback';
System altered.
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database flashback on;
Database altered.
SQL> create restore point before_open_standby guarantee flashback database;
Restore point created.
SQL> alter database activate standby database;
Database altered.
SQL> select database_role from v$database;
DATABASE_ROLE
PRIMARY
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
SQL> select max(sequence#) from v$log_history;
MAX(SEQUENCE#)
9221 (This is the log sequence same after the failover also)
after the we have nearly some 30 log sequence are generated but it started from the no 1.
Now we need to rebuild the Production DB and to sync with the standby.. please help us with the steps and suggest some documents.

Hi,
Please take a look at this http://shivanandarao.wordpress.com/2012/08/28/dataguard-failover/
SHANOJ
Handle:     SHANOJ
Status Level:     Newbie (5)
Registered:     Feb 15, 2006
Total Posts:     154
Total Questions:     *25 (21 unresolved)*
Name     SHANOJ
Location     Chennai - India
Occupation     DBA
Biography     OCP 10G, LPI, ITIL V3
If you feel your questions have been answered, then please consider closing your threads as answered by providing appropriate points rather than leaving it open. Follow the forums etiquette.

Stale NFS handle after failover

Similar Messages

Maybe you are looking for