Stall after Loader.load() any .png iOS7
My app includes a script to load several .jpg or .png "slides". I make an array and then load the first one, when its Event.COMPLETE fires, I load the next one. I've found that when running on the iPad it will usually pause for a good 30-60 seconds immediately after I call Loader.load() if the file is a .png. I say that it pauses because I don't even get the progess events to fire until it finally commences. But then it seems to always recover, fires the progress events and finally the Event.COMPLETE. It only happens on the device--not the "test movie" similator. Using AIR 3.9.0.960 in Flash CS6.
Any ideas? I can make a simple example that demonstrates the problem if need be.
Hi,
Thanks for reporting the problem. Could you please answer following?
Is this specific to iOS7?
Is this specific to any particular iOS device type? iPhone or iPad?
Does this happen only on 3.9 builds or you've encountered this on older versions (3.8?) of AIR SDK as well?
We request you to file a bug on bugbase.adobe.com with a sample set of files which demonstrate the problem. Also, please report back the bug number here on the forum.
-Thanks
Pahup
Similar Messages
-
New iPod Touch 32gb stalls after starting sync, error 54, manual synce gets dumped
I just got this thing at Walmart last Sunday and its been driving me nuts all week! It's the brand new iPod Touch 32gb 4gen. When trying to sync it will start to load music then stall. Sometimes it gives error code 54, sometimes says it cant convert song, cant find song, or just stalls. If I wait anywhere from 15 minutes to an hour it will finally un-freeze and dump everything or say the connection has timed out. I've ran repair on iTunes from control panel, no help. Un-installed iTunes and re-installed it then tried synce, no help. I un-selected everything in the iPod summary so that it wont try to synce when I connect it and selected manual synce. Then I could sync a few songs at a time, but it still stalls after only loading a few songs on iPod. Tried dumping everything out of the ipod and start over, several times, no help. I've been 6 days, all day, every day, and half the nights getting a few songs at a time on this dam thing. I found when it stalls if I turn the iPod off to force it out of iTunes I can then restart iTunes, reconnect the iPod, manually select 15 to 20 songs and drag them to the iPod. A few times I got over a hundred to sync but usually 20 to 30 songs then it stalls. Then I have to do the whole thing over again. I had a little over 1200 songs out of the 1877 songs, 11.28gb, in my music library when the last time it stalled, it dumped everything. 4 or 5 days of manually syncing a few songs at a time, GONE. Just poof, all that work for nothing. The only thing left on it is 92 of the hundred something songs I've bought from iTunes. I'm ready to take a hammer to the dam thing and send it back to Walmart where I got it.
I'm using a Dell Studio 17 inch laptop that's about 4 yrs old running Windows 7 that I installed 2 years ago. I had a iPod nano 2gb that worked fine with this computer & iTunes untill it died last spring.
Why do you have it set up so that one little hickup and the dam thing dumps everything thats on it? I cant even stop it from starting to sync when I connect it because I need to see the settings in the summary for the iPod to change the settings, but I cant see that until I connect it, but as soon as I connect it, it try's to start the sync and stalls feezing everything.
Can anybody help me before this thing drives me completely over the edge!?
The ColoradoHermitI have a older Dell Optiplex desktop computer running Windows XP. I copied the iTunes folder on my laptop to an external drive and plugged that into my desktop computer. Then connected the iPod Touch to the desktop. For some reason or other the computer thought the iPod was a camera and wanted to know which photo program to open with or for it. I never did get iTunes on my desktop computer to "see" the iPod and had to give up that idea.
When going into the My Computer or Windows Explorer - which is the one I like to use for working with my files- when I connect the iPod to my computer in Windows Explorer it will show the iPod. Open that and it shows Internal Storage, open that and a folder with DCIM shows below it, open that and a folder with 860OKMZO on it shows below that, open that and it has the 40 or 50 photos I saved from Facebook. That's it, there isn't anything else shown in its storage. The iTunes on my old Desktop doesn't see the iPod Touch either.
Even if the iTunes on my old desktop would work with this iPod Touch it wouldn't do me any good. I read in a post that once it is connected to a iTunes Library, if its connected to any other iTunes Library on a different computer it will dump everything that's on it. Which is totally stupid but I think they - iTunes - have it that way so that you cant share your music with somebody elses computer. But that also makes it so I cant manually sync one thing at a time with my own iTunes Library. I tried syncing my music first and after I got some of it on the iPod, in its summary I deselected the music sync and selected the movies or video's so I could manually synce a few to it to see if it would work. Bad move. As soon as I did that it dumped everything that was on it, then said that it could not sync the movies because the files could not be written. HUH? Why a video from YouTube could not be written beats me. But why did it dump all the music?
The last thing I did with it was put all the options in the summary in iTunes back to default, removed everything on the iPod that was left after its last dump, then disconnected it, closed iTunes, and rebooted my laptop and started over from scratch. Started iTunes, connected the iPod, after iTunes found it I opened the iPod summary, made sure everything except sync photo's was selected, then started the sync function. It immediately listed all the songs and the songs info in light gray under music on the iPod. It only got 2 songs copied, then stalled. I just left it alone to see what it would do. I opened the Windows Task Manager to see what it was doing. Even though the iTunes program appered to be stalled it was using 50% of the CPU. After about 15 minutes it showed a popup window saying the song could not be writen then another saying its connection to the iPod had timed out, then iTunes stalled and "not responding" showed in task manager and at the top of the iTunes window. After 30 minutes I had to force it to close with the Task Manager. By then it was after midnight and had been another 12 hours wasted messing with this thing. -
After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?
After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?
Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.
-
Itunes is not loading after i've updated to ios7. What do i do?
Itunes is not loading after i've updated to ios7. What do i do?
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
Not receiving Earthlink/mindspring emails after loading Lion - any help out there?
Not receiving Earthlink/mindspring emails after loading Lion - any help out there? Have received mindspring emails OK, but not able to send them. All other accounts seem OK.
Pretty much the ipod is going to need to be repair. I would suggest taking it into the nearest Apple Store because they give you a 10% discount for older ipods towards a new ipod.
-
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
Finder stalls after wakeup if I click or move a file before iPod icon loads
The Finder stalls after wakeup if I click on a file or move a file before the iPod icon loads. I have to wait a few seconds until the iPod icon appears on screen before clicking or moving a file or application. If I click a file or app, or attempt to move a file, the spinning color wheel appears and the iMac stalls. I have to force quit the Finder. This behavior seems abnormal.
I'm having the same problem.
I select a file then drag to a folder, wait to the folder be selectioned. The file is not transferred. The same happens if you try to move a folder.
Have rebooted my macbook pro 2 times. The problem continues ...
Can someone help? -
how do i after down load creative cloud and have it in the tool bar , then click on it ,it brings up a box called creative cloud then just rotates not bringing up any apps ?
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430 -
I'm missing a lot of my pictures on my phone after going to the cloud. You cab see that the were there but it's just a grey tile now. When I click on it it just spins loading. Any help would be appreciated.
I, on the other hand, had no brightness issues on the 4S after upgrading to iOS 6, and no change in (good) battery life. If could be something else, an app or background process that is less efficient with iOS 6? Could be anything.
-
firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
ps. IE works as usualProblem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.
-
Reader stops when after loading document. Says stops working! It will load without any document!
Reader stops when after loading document. Says stops working! It will load without any document! Help!?? This has been going on for several months. Help!
What is your operating system? Reader version?
-
I lost my iphone the day after down loading from itune but the songs aren't on my itune account but I did get a bill for the song. I did n't get another iiphone phone but I need my music put back on my account my iTunes account. If I'm paying for them! I want to music!
It's as simple as this:
Open iTunes.
Click iTunes Store on the left side of the screen.
Look on the left side - click Purchased (it has a NEW graphic next to it)
You will see everything you have every purchased from iTunes. You can redownload any of it.
Enjoy. Good luck finding your iPhone. If you get another one make sure to set up Find my iPhone as soon as you get it so you can track it down if you lose it again. -
Upgraded my Imac to Mt. Lion and now the Microsoft Office icons will not open WORD, EXCEL, POWERPOINT, or ENTOURAGE. I just pruchased on Ebay
OFFICE 2011 since my old version was 2004. DO I REMOVE THE OLD ICONS BEFORE LOADING OFFICE 2011 RO AFTER I LOAD IT???
THANKS, DR PEPPERMINTOffice 2011 will install in a separate folder. But do not install Office 2011 until you remove Office 2004. It comes with its own uninstalled located in the MS Office folder. Only use the uninstaller to get rid of it. Then install Office 2011.
Office 2004 and Other Applications Don't Work in Lion/Mountain Lion
If you have Office 2004 which is a PPC-only suite, it will not work in Lion/Mountain Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
As for other software, any PPC-based software will not run in Lion or Mountain Lion because Rosetta is no longer part of OS X. You will need to upgrade to Intel versions of the software.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
After down loading os 10.7, I can no longer open microsoft word
After down loading os 10.7, I can no longer open microsoft word
No, your old Word files should still be where you left them and can be opened by either a current version of Office:mac or even Apple Pages (more or less). The problem that you are having (we think) is that you are trying to run an older version of Microsoft Office:mac (e.g. Office:mac 2004 or older) and this software was compiled for a PowerPC processor. The last few versions of the Mac OS has allowed PowerPC programs to run on an Mac with an Intel processor through a translation system called Rosetta that converted PowerPC code to Intel code. However, Apple stopped providing that software in 10.7 so any PowerPC applications will no longer run.
Office:mac 2008 and Office:mac 2011 will run on an Intel-based Mac and therefore will run on 10.7.
Maybe you are looking for
-
Syntax and format of a IF statement in formula XPath in a InfoPath field
Good day I needed assistance with IF statement syntax in a InfoPath field formula. If Field_1 = null concat(substring-before(txtComponentNo1, "."), ".", substring-before(field17, "."), ".", substring-after(field17, ".")) Else concat(substring-before(
-
How-to map multiple explicit search help values to context attributes?
Hi, I have a custom explicit Search Help with multiple attributes set as export and uses search help exit for data retrieval. I have set this Search Help for one of the context attribute that is binded to one of the input fields on view. Now, is it p
-
Oracle standard editon vs standard editon one
Hi experts How can we determine whether we have oracle standard editon vs standard editon one installed this is for 11g Rel 2 thanks
-
How do I change inches to pixels in 3D properties panel?
How do I change inches to pixels in 3D properties panel?
-
"t" Key only works Intermittently
I have problems with letter "t". At times it won't respond at all and others I get a row of t's. What's the solution? Of the t's in this line I had problems with about three.