Stamina mode / Ultra stamina mode as an action in Sony smart connect?

Please provide triggering Stamina/Utra stamina as an action in Smart Connect. I must be able to initiate stamina mode when I read  NFC tag.
Sony Xperia Z3 : D6653
Lollipop 5.0.2,  Image 23.1.A.0.726
India

Contact Sony directly and submit your suggestion
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable.  The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

    I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable.  The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great.  The network name I assigned to the TC is also not appearing among available networks.  How do I remedy this, please?

    What OS on the computer you are using to setup the TC?
    Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
    Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
    No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
    No luck I can show you manual method.

  • Mode Not Supported message on Sony BDPS3100 Bluray Player

    Hi,
    I bought a Sony - Smart Wi-Fi Built-In Blu-ray Player Model: BDPS3100 last weekend. When I play any DVDs on this player, I get a message saying 'Mode Not Supported. Please change the resolution of the external device'. I have connected this to a Samsung 1080p LED TV through HDMI cable. I get Netflix and other apps displayed properly on the TV and it works great with Wi-Fi connectivity. The only issue is that it is not playing any DVDs. I tried playing the same DVD on my laptop and it worked. So no issues with the DVD. I tried connecting the HDMI to both HDMI1 and HDMI2 ports on the TV but still no luck. I also tried chaning the Output settings in the player to reduce the resolution to 780p and 480p as well, still no luck in playing the DVD. I have not tried a Bluray disk yet. Any pointers on how to get this fixed? Oh yeah, I've tried switching off the player and turning it on but with no luck. Read somewhere that holding the STOP button for 10 secs will make the player reset the settings and play the disk but that too didn't work. So am lost at this point on how to play DVDs on this player. Any help would be appreciated.
    Thanks

    Do you have a laptop that has an HDMI in? Probably not, but just checking.
    It may be a bad laser. Try a blu ray and see if that works

  • My phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    my phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

  • HT201263 Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?

    Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?

    Delete the .ipsw file on the computer.
    Put the device in DFU mode.
    Restore as new, once the restore completes, then try restoring from backup.

  • PS5 Crashes in 32-bit Mode When Certain Actions Are run

    Running PS5 under OS 10.6.3 on a dual quad core intel machine w/14GB of ram, files are stored on an internal drive. Some actions will crash photoshop in 32-bit mode but not 64-bit. Is there anything that I can do to track down the problem and fix it?
    Thaks,
    mark

    Hi Chris,
    Thanks for jumping in.
    The next time PS crashes with an action we will get the crash report to send to you along with the action.
    The actions in question do not call on any third party plugin-ins.
    Thanks,
    mark

  • Service Desk - Expert Mode - Not all actions are available

    Dear SAP colleagues,
    I have just implemented the Service Desk in our SOLMAN system.
    1. I choose Incident Management
    2. I click on Queries
    3. I click on a ticket (Transaction ID).
    4. I edit the message
    5. When I select Actions, I only have the 4 following options :
        - Send Message to SAP
        - Maintain SAP Logon Data
        - Display SAP Action Log
        - Update SAP Message
    When I consult some demos, there are many differents options available in Actions menu, as, for example :
    - Open System fro SAP
    - Confirm Message to SAP
    - E-Mail to Message Creator (Mail)
    - Print Message
    - Create Change Document
    - Call Solution Manager Diagnostics.
    Is it due to an missing authorizations (roles and profiles) ?
    Thanks for your input.
    Best regards
    CP2009

    Dear Rajeev,
    First of all, thanks for your input.
    I have choosen SIVA when I have activated BC Sets.
    Should I activate also BC Sets for transaction type SLFN ?
    1. I have started SPPFCADM and follow your recommandations.
    2. I have choosen CRM_ORDER
    3. I have then click on "Condition Configuration (Transportable Conditions)
    4. There are many entries related to the Support and Service Desk
    Example : Support Desk Message Action Profile
    I have 5 actions defined -
    Action 01 : Send Message to Processor
    Action 02 : Create/Change Basis Message from CRM Procedure
    Action 03 : Send Notification to SAP
    Action 04 : Update Message from SAP
    Action 05 : Confirm Message to SAP
    I have activate BC Sets for transaction type SIVA, not for SLFN.
    Best regards
    CP2009

  • My ipod 5 was stolen but I have find my ipod installed on it but my ipod isn't/never was connected to a wifi network when it was stolen so how will my ipod play sound or go on lost mode and if there's no wifi connected to it?

    my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?

    Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Iphone 3gs stuck in recovery mode , power button dosent work, and cant connect to itunes.

    Well This Is Bad.
    So today i used my iphone 3gs.. and then it had a problem so i restored it. then during the restore it gave me error 20. i tried looking at apple support but it didnt help.
    so heres what it has:
    1. broken power button
    2. cant be seen on itunes.. not even the mac!
    3. stuck in recovery mode.
    4. dosent sence a computer.
    now i hear theres a "freezer trick" to get it out of this mode. but i tried it and no luck.
    i also looked on youtube, google,and apple support and stores. but theres nobody who had this problem.
    im trying to wait till the battery runs out but that will take long.
    what should i do?!?

    You are right there as a weard issue try with the battery comes out and then try to connect to the itunes should be working properly, if not fix the power on/off button because are escential to do it.

  • Can't boot in safe mode AND no sleeping, can those be connected? Can those be SOLVED?!

    Hello and thanks for reading this.
    My MBP with Lion is having 2 problems and I:
    -    Would like to solve them
    -    Was wondering if they are connected.
    BTW, tried vastly googling both and read quite a lot in different forums and the Internet, but couldn’t come with a solution, just succeeded to live with. (Something like marriage)…
    The first problem: if I leave my computer to go to sleep and it does for a long time, when I try to wake him up, I get either the SBD (Spinning Ball of Death), or stuck in a black screen. Need to push the power button.
    What I do is, before going to sleep/long time away of computer, either close the lid or Apple icon-> Sleep and that’s fine.
    Second problem: can’t boot into Safe Mode.
    Immediately after the startup chime I press the Shift key, after 2-3 seconds get the login window, key in my password. Instead of logging in, it goes to a screen with the Apple icon, underneath the Apple spinning gear and underneath that a loading bar.
    After quite some time the loading bar disappears, the gear goes on spinning for a LONG time, then black screen, startup chime again and login window. Then, when I key in my password, it just logs in as usual, no safe mode.
    I tried to write in Terminal “sudo nvram boot-args="-x"”, BIG mistake! It got my computer into a never ending loop of those screens. I don’t exactly remember what eventually got me out of this loop (I think I booted from a clone, then started with the Lion CD and wrote back “sudo nvram boot-args=""” in Terminal.
    I also tried reinstalling the OS, all that without any successes.
    Any ideas anyone?
    Thanks in advance for any help.
    GM

    Created.
    Exactly the same process.
    And now I realize something interesting:
    I didn't realize that lately the startup login window, instead of bringing my 3 accounts, brings only mine (in the preferences pane after I login they appear, as usual, but not in the login window).
    Now, I am constantly backing up to 2 separated external hard disks an incremental backup to a bootable clone. If I boot from one of them it does bring the 3 accounts.
    Do you think I should stop bothering about troubleshooting and just erase the hard disk,  install the Lion from scratch and that's it?

  • Pavilion zd7000 starts in battery mode only; runs on AC only when connected to printer by USB port

    My Pavilion zd 7379ea will only start up in battery mode. AC adapter appears OK with a firm green LED, so external power supply may not be the issue here? When I'm starting up (with what's left on the battery), both the charging LED and the AC LED are constantly blinking. When turned off, the battery LED is firm, and battery appears to be charging (but which obviously is not the case).  Occasionally, when computer is turned off, the AC LED is lit with a firm light.
    One odd thing I noted before this happened was that the computer ran on AC only when my HP printer was connected to one of the USB ports (no battery inserted). If I disconnected the printer USB cord, the computer just died immediately; it was like the computer was powered by the printer. Later I also discovered that the same cord (where it connected to the printer) had melted from extreme overheating. I tried to update the USB drivers for each port but it didn't change things. I also tried to connect a different printer to get the computer started but it didn't work this time. I'd be extremely grateful for any comments that may solve this power supply issue (and if possible explain the stuff with the printer connection).
    S/N{removed for privacy]; P/N PH989EA#AK8

    Hi,
    Schindi285460 wrote:
    My Pavilion zd 7379ea will only start up in battery mode. AC adapter appears OK with a firm green LED, so external power supply may not be the issue here? When I'm starting up (with what's left on the battery), both the charging LED and the AC LED are constantly blinking. When turned off, the battery LED is firm, and battery appears to be charging (but which obviously is not the case).  Occasionally, when computer is turned off, the AC LED is lit with a firm light.
    One odd thing I noted before this happened was that the computer ran on AC only when my HP printer was connected to one of the USB ports (no battery inserted). If I disconnected the printer USB cord, the computer just died immediately; it was like the computer was powered by the printer. Later I also discovered that the same cord (where it connected to the printer) had melted from extreme overheating. I tried to update the USB drivers for each port but it didn't change things. I also tried to connect a different printer to get the computer started but it didn't work this time. I'd be extremely grateful for any comments that may solve this power supply issue (and if possible explain the stuff with the printer connection).
    S/N{removed for privacy]; P/N PH989EA#AK8
    You unplugged a USB device while the notebook was still booted into Windows and on? 
    Normally that won't cause any issues but , If you did that you may have damaged your  system board's Southport chip.
    USB is not a plug n' play port like SATA  and eSATA are.
    Here is a link to the maintenence manual for your laptop series.
    Is your notebook still within warranty? By the processor components listed in the manual,I believe it is probably not.
    best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My passcode wont work on ipod touch the recovery mode wont work because of nno network connection, what do i do

    my pascode wont work, ive tried the recovery mode but that wont work because of a network connection error, what do i do

    Does the the computer connect to the internet?
    If yes
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Updating software came up with error now asking to connect to iTunes but when i do says ipad in recovery mode and must restore the ipad before connecting to iTunes ?

    I was updating my daughters ipad last night to the latest operting system, when finished it came up with an error message, her ipad then went blank and came up with the picture to connect to itunes. But when I connect to itunes it comes up with the error message "itunes has detected an ipad in recovery mode. You must restore this ipad before it can be used with itunes" - can someone help with how I can do this

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • IPhone 4s stuck in recovery mode after failed restore, and won't connect to iTunes

    I tried restoring my iPhone 4s with iTunes. I download the latest firmware from apple's website, and when I tried to restore my iphone with it on itunes, it gave me an error message and put it in recovery mode. I tried to restore again, but it will not connect to itunes.I've tried turning to DFU mode and other things, but it still won't show up on itunes as a phone in recovery mode, or anything. Is it bricked, or can I still fix it?

    What was the exact error message, including any numbers?  Was this phone ever jailbroken?
    See this:
    If you can't update or restore your iOS device

  • I was updating my ipod and it went into recovery mode and wont restore it says the connection isnt working

    I was updating my ipod and it went straight into recovery mode so I tried to restore it and it says it cant because the connection

    Hello courtney lynn 7420,
    Thanks for using Apple Support Communities.
    From your post I understand you ran into an issue with restoring your iPod with iTunes.  Without an error message or error code provided, the best troubleshooting step for you to go through is the article linked to below.
    Resolve iOS update and restore errors in iTunes
    Cheers,
    Alex H.

Maybe you are looking for