Stand-alone DFS Share - Folder targets - wrong credentials

Hi all
I am currently setting up a stand-alone DFS root with some Folder targets on different servers.
All server are Windows 2012 R2 with all available patches.
I use the stand-alone DFS because many users will access it with non domain computers.
I changed the DFS to FQDN and i can reach it without any problems. But as soon as i click to a folder target i get the message that i use the wrong logon name or password.
On the server that host this folder target i can see that the client want to logon with the local username and credentials. What of course does not work.
What must i do, that the client use the same credentials for connecting to the folder target server as connecting to the DFS share? And it must be done on the server side because i have no control over the clients. Must i do a credential delegation between
the DFS Share Server and the folder target server?
Thanks for any hint
JBAB

Hi,
If they are accessing the shares using NetBIOS name from non-domain workstation, it will use the logged on account. If you access the stand-alone DFS share by using FQDN from non-domain workstation, it will prompt for credentials and should use the domain’s
credentials.
For more detailed information, please refer to the thread below:
DFS share across Domains will not Authenticate properly with non-domain workstation
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6dc26639-740a-4148-aa48-673e9732242b/dfs-share-across-domains-will-not-authenticate-properly-with-nondomain-workstation?forum=winserverDS
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How to run stand alone executables developed with different versions of LabView on the same system

I am using LabVIEW 8.2 to develop a stand alone executable for a target system. The target system already has a stand alone executable written by another vendor, using LabVIEW 7.1. I installed the LV RunTime Engine for 8.2 which left the 7.1 engine intact (as it should). The problem I am now having is that the drivers installed on the target system are incompatible with the NI-DMM vi's that I am using. My concern is that if I replace the old drivers with the ones I am using on my development platform I may end up breaking the old software. What would be an appropriate work around to ensure that the target system will be able to run both executables? (FWIW the system will NOT be running both executables concurrently.)
The target system is an embedded PXI card cage, running Windows XP, with a NI PXI-4070 DMM (among other instruments, however I have had not had this issue with the NI-DAQmx drivers).

Hi Yerffejj,
Thanks for sharing your issue with the community. I am struggling to see what you mean by "break the software." If you only have the two executables and LV Run-Time versions 8.2 & 7.1, then you just need to go to http://www.ni.com/support/ » Drivers and Updates » Search within Results: » enter "NI-DMM" » GO to get the DMM driver you need. To see the driver you were using on the development machine, just go to Measurement & Automation Explorer (MAX). The DMM driver should also automatically install DAQmx, NI-VISA, and NI-IVI, fyi.
Best wishes to you, and please let us know if that does not solve your problem.
Regards,
Dan Richards
Dan Richards
Certified LabVIEW Developer

DFS Folder Target to Samba Share not working

Hello folks,
I'm on Server 2012 R2. I'm using a DFS Namespace that is configured as standalone server (i.e. not a domain-based namespace). The Namespace is the IP address of the server. I have also tried this with the hostname of the server and I get the same results.
Here's my problem:
I've created a folder target within DFS that points to a samba share on a linux-based NAS. The samba share is a 'cloud storage' share hosted by my server host, so I'm not entirely sure what specific technology it is. It does not have a public ACL - it requires
authentication and I cannot change that. I can connect to the Namespace fine from other servers. However, when I try to open the folder target, it tells me "Logon failure: unknown user name or bad password". Then, if I right-click the folder, select
Properties then the DFS tab, I see that the path is Active. If I click Check Status, I get Okay, and when I exit, the folder is now navigable and I have no problems browsing the folders. Sometimes when I close Explorer, the share will still be accessible when
I reopen Explorer and browse to it, but most of the time when I close and reopen, the same error is displayed and I have to Check Status again to regain access. If I logout of the session, log back in and try again, it always gives me the error until I Check
Status again.
The idea is to access this share from multiple instances of IIS, so obviously requiring user intervention is not going to be suitable. I have added a local user to the DFS server that matches the valid credentials on the samba share, and I've also added
them to all the servers trying to use this share. I've confirmed that all servers can browse directly to the share. I do notice that when I browse directly to the samba share after having not used it for some time (30 minutes or one hour), it takes longer
than expected to open - maybe 10 seconds. Could this lag be causing the issue? There are no errors or warnings in the logs on the DFS server. Any ideas what this could be? Have I missed something? Massive thanks for any guidance!

Hi,
Thanks for your posting.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is the easiest way to ensure correct permissions on multiple servers for folder targets (2008r2) DFS-R

I have 5 sites to manage and need to create replicated folders using a domain DFS on at least one server on each site. (2008R2)
My aim is to work out the most efficient (i.e. least work) of creating shares on each server and ensuring that permissions are consistent.
At the start there will notionally be one "master" share and all the other "satellite" servers will connect bi-directionally with this central one.
So if I ensure that when the folders are created on the satellite servers that administrators and system have NTFS full control, will those folders inherit the permissions from the source folder, or will I need to set permissions on each server?
regards
roga

After initial replication finished, there is no Primary server anymore
Hi Shaon, and thanks for your reply
I am aware that when you create the first 2 members of a group DFS-R asks you to select a master.
The situation I am now in is that 4 of 6 machines have finished replication and I have another 2 to add.
So when I add a new member to the group, will the group NTFS perms be applied to the new member target, or do I have to set the NTFS perms on the new target prior to replication?
If permission granting is automatic, are there any minimum perms on the new folder target, e.g. that the system has full control
Part of the reason why I am asking is this: sometime we put re-directed folders into DFS and these have complex NTFS permissions i.e. "domain user" can create folders but not files and "creator owner" has full access to sub files and
folders. It is very easy in this situation to get some of the perms wrong on one of the member targets.
regards
Roga

Stand-Alone Application including ocx, dll and Word template folder

Hi,
I try to create an Stand-Alone Application with labview 2011. My problem is how i can include ocx and dll file in my executable to be run by others computers (the other computer don't have the dll and the ocx using in the application). My program use Word template who is in a folder. How i can integrated this Template folder in my executable folder.
This is the first time I create an executable, so please help me -_-.
Nki
Solved!
Go to Solution.

Hi nki,
To include the ocx and dll files you will need to build an executable for your VI and then create an installer for the additional files. I have linked 2 documents that will explain each of these steps. If you have any questions with this let me know.
http://zone.ni.com/reference/en-XX/help/371361E-01/lvhowto/exe_ex/
http://digital.ni.com/public.nsf/allkb/E09BA0E2F31D304F86256A640070058E?OpenDocument
Patrick H | National Instruments | Software Engineer

Using stand alone executables to send data to the parallel port

I have a executable that uses the parallel port to activate an alarm. The program works well on the base machine which is running windows XP. However when I try to run the stand alone executable on a windows NT machine there is nothing sent to the parallel port. I have updated the Cvirt file on all machines. I don't get any error messages when running the stand alone executable.

I have the same situation using parallel port to control a hot swap PCI extender card and no error showed. I can turn on/off and read correct voltages from the card in base machine. After creating executables, I can turn on/off the card, but got wrong voltages in target machine.
I've installed AccessHW in both machines and copied AccessHW.dll and cvirte.dll to system32 folder and the folder same with executables. I also tried installer with port support and serial support checked.
Windows XP is in both machines and LV 7 in base machine. I use "Output Byte to Port.vi" and "Input Byte from Port.vi" in AccessHW lib.
One thing I observe is initiation. The card manufacturer provides a program with same functions. After running their program, the voltage readings from the executables become correct. The readings remain good after closing their program. I close the executables and run the executables again and still see good results unless restarting the target machine.
Any solution for the problem? Thanks in advance!

Are stand alone LV applications compiled in Win2000 portable to WinNT and Win95?

I recently upgraded from LV 5 to LV6.1 and at the same time upgraded my developement PC from WinNT to Win2000.
I have successfully created stand alone applications (with the App. Builder) which run on other Win2000 PCs, but the installer doesn't want to run on a WinNT PC. I am including the LV runtime engine with the application installer.
Can an executable compiled in Win2000 be installed on WinNT and Win95 PCs?
Does the LV Run Time Engine need to be installed separately?
(Or is there maybe just some thing wrong with the WinNT PC?)
Thanks
Tim.S

I develop on Win2K as well, and I haven't had any trouble (knock on wood) running these apps on Win9x/NT4. The only issues I've seen were installation issues; Windows 95 doesn't come with the Windows Installer service, which is used by installers created with the LabVIEW 6.1 Application Builder. The target directory for your installation should have included InstMsiA.exe and InstMsiW.exe, which will add the Windows Installer service to any machine that doesn't have it. Are you putting these files on your install disc along with setup.exe?
You may want to try manually adding the Windows Installer service to the target PC. You can download it for free at http://download.microsoft.com/download/WindowsInstaller/Install/2.0/W9XMe/EN-US/InstMsiA.exe for Win9x or
http://download.microsoft.com/download/WindowsInstaller/Install/2.0/NT45/EN-US/InstMsiW.exe for WinNT.
You can also try installing the LV Runtime Engine separately on the target PC and just copying your program's executable over, but that shouldn't be necessary. One more thing to check is that the user installing your program is logged in with sufficient privileges on the target PC.
One more alternative would be to copy the entire contents of your development PC's LabVIEW 6.1 Runtime folder (C:\Program Files\National Instruments\shared\LabVIEW Run-Time\6.1) onto the target PC, into the same folder where your app lives. Again, this shouldn't be necessary but is one more way to get the LabVIEW RTE onto the end user's computer.

Calling a web service through SSL via a stand alone java class

HI,
I am trying to call a web service through SSL via a simple stand alone java client.
I have imported the SSL certificate in my keystore by using the keytool -import command.
Basically I want to add a user to a group on the server. Say I add a user user 1 to group group 1 using an admin userid and password. All these values are set in an xml file which I send to the server while calling the server. I pass the web service URL, the soap action name and the xml to post as the command line arguments to the java client.
My xml file(Add.xml) that is posted looks like :
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope
xmlns:xsi = "http://www.w3.org/1999/XMLSchema-instance"
xmlns:SOAP-ENC = "http://schemas.xmlsoap.org/soap/encoding/"
xmlns:SOAP-ENV = "http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd = "http://www.w3.org/1999/XMLSchema"
SOAP-ENV:encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<namesp1:modifyGroupOperation xmlns:namesp1 = "/services/modifyGroup/modifyGroupOp">
<auth>
<user>adminUser</user>
<password>adminPassword</password>
</auth>
<operationType>ADD</operationType>
<groupName>group1</groupName>
<users>
<userName>user1</userName>
</users>
</namesp1:modifyGroupOperation>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I call the client as:
java PostXML https://com.webservice.com/services/modifyGroup "/services/modifyGroup/modifyGroupOp" Add.xml
I my client, I have set the following:
System.setProperty("javax.net.ssl.keyStore", "C:\\Program Files\\Java\\jre1.5.0_12\\lib\\security\\cacerts");
System.setProperty("javax.net.ssl.keyStorePassword", "password");
System.setProperty("javax.net.ssl.trustStore", "C:\\Program Files\\Java\\jre1.5.0_12\\lib\\security\\cacerts");
System.setProperty("javax.net.ssl.trustStorePassword", "password");
But when I try to execute the java client, I get the following error:
setting up default SSLSocketFactory
use default SunJSSE impl class: com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl is loaded
keyStore is : C:\Program Files\Java\jre1.5.0_12\lib\security\cacerts
keyStore type is : jks
keyStore provider is :
init keystore
init keymanager of type SunX509
trustStore is: C:\Program Files\Java\jre1.5.0_12\lib\security\cacerts
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
init context
trigger seeding of SecureRandom
done seeding SecureRandom
instantiated an instance of class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
main, setSoTimeout(0) called
main, setSoTimeout(0) called
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: .....
Compression Methods: { 0 }
[write] MD5 and SHA1 hashes: len = 73
main, WRITE: TLSv1 Handshake, length = 73
[write] MD5 and SHA1 hashes: len = 98
main, WRITE: SSLv2 client hello message, length = 98
[Raw write]: length = 100
[Raw read]: length = 5
[Raw read]: length = 58
main, READ: TLSv1 Handshake, length = 58
*** ServerHello, TLSv1
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
[read] MD5 and SHA1 hashes: len = 58
[Raw read]: length = 5
[Raw read]: length = 5530
main, READ: TLSv1 Handshake, length = 5530
*** Certificate chain
chain [0] = ...
chain [1] = ...
chain [2] = ...
chain [3] = ...
main, SEND TLSv1 ALERT: fatal, description = certificate_unknown
main, WRITE: TLSv1 Alert, length = 2
[Raw write]: length = 7
0000: 15 03 01 00 02 02 2E .......
main, called closeSocket()
main, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
main, called close()
main, called closeInternal(true)
main, called close()
main, called closeInternal(true)
main, called close()
main, called closeInternal(true)
Exception in thread "main" javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.c
ertpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(Unknown Source)
at java.io.BufferedOutputStream.flush(Unknown Source)
at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:506)
at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2110)
at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1088)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
at PostXML.main(PostXML.java:111)
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find v
alid certification path to requested target
at sun.security.validator.PKIXValidator.doBuild(Unknown Source)
at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
at sun.security.validator.Validator.validate(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(Unknown Source)
... 18 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(Unknown Source)
at java.security.cert.CertPathBuilder.build(Unknown Source)
... 23 more
I do not know where I have gone wrong. Could someone point out my mistake.
Thanks In advance!

Hi jazz123,
There's an example in the [*Java Web Services Tutorial*|http://java.sun.com/webservices/docs/2.0/tutorial/doc/] : see Chapter 1: Building Web Services with JAX-WS - A Simple JAX-WS Client.

My DVD's Audio is fine on the Mac - but MISSING on stand-alone player

Slightly wrong forum (sorry) but all the experts are here!
Re-hashing my 4:3 DV (PAL) movie for a re-release of the DVD and all's gone extremely well until now.
On my (DVDSP) burned DVD all video is working fine - the audio files are .ac3
No audio in the AUDIO_TS folder on disc - or in the cache (using finder).
Where did I go wrong?
How can it play perfectly on the Mac (DVD Player) and there be NO AUDIO on the stand-alone?
Thanks in anxious anticipation!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Panasonic HVX200 Mac OS X (10.4.9)
"I've taught you all I know, and still you know nothing".

Thanks both.
Talk about a fun Friday, we have HUGE floods here (no - nothing to do with the DVD problem, OR the vacuum cleaner) the UK's had an abnormal amount of rain recently and today's been hideous!
To get back to the topic, as in all pro studios, the DVD player is on the floor - and the carpet was vacuumed yesterday. I notice the player had moved but it didn't dawn on me to check the cables.
Typical of me - assume there's a really serious technical problem first - check the obvious last!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Panasonic HVX200 Mac OS X (10.4.9)
"I've taught you all I know, and still you know nothing".

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

I have trouble in building stand-alone application, "you must intall Labview run-time engine on any computer on which you want to run this application"

I have installed the LabVIEW 7.0 run time engine and checked all in the advanced setup on the installer setup slide. but I still get such a message saying that the target computer needs to have LabVIEW 7.0 run-time engine. What I want is a real stand-alone application even without having labview ... I used to think that's due to my program contains MATLAB nodes. But this is not true, since even without Matlab, it's still wrong. Please help, thanks!!!

As was stated elsewhere, you have the option of building the runtime engine into your application when you build it. However, you can also create a "runtime engine application" by simply opening the application builder and doing a build without adding any source code files. The result is a small program (named lvrt.exe) that can run any LabVIEW code--whether or not its built into an executable.
Such an application can be helpful if you are wanting to install several LV-based applications on the same computer in that it reduces the amount of redundant code on disk. All you have to do is make sure that Windows on the target computer associates the llb and vi file extensions with the runtime engine program.
It can also be helpful during testing to run test code that isn't built into an executable.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to include dll into a stand-alone application

Hi, I wrote a vi to process images from my camera, and I want to build a stand-alone application(exe), so I can share the application with my friends. I just do as wht's in the Labview help, but when I run the exe file in other PC, it tells me I haven't nivision.dll etc. My question is how to find out the dll files in my vi and include these files in the stand-alone application?

To be honest I am not sure. Its been a while since have used the vision run-time engine. Before I installed it on the target computer. I ddn't include it with my application build.
Take a look at this http://digital.ni.com/public.nsf/allkb/1A9A18AA574ABEDF86256F780062C240 it might help. Also look at the documentation supplied with the vision deployment license.
David

AMF connection working on browser, not in stand alone player

Greetings,
I'm trying to communicate my SWF file with PHP using Zend_Amf. I compile the flash side using Flex SDK 4.
Whenever I try to run the swf using the stand alone player (the projector), I always get a NetConnection.Call.BadVersion event. However, when running exactly the same file thorught the player of the browser (even not thoguht a server, just using the file:// kind of address), everything works OK, so I know my code is not completely wrong.
I thought this could be related with the security sandbox. However, I added the folder where my swf file is to the global trusted folder; and actually made sure that Security.sandboxType returns "localTrusted". How ever, that didn't fix anything.
So I'm out of ideas. Any suggestion on where to look next?

Here's my code, in case its needed (it's a pretty straightforward hello world example):
PHP SIDE:
$a = new Amf_Model_Test();
$server = new Zend_Amf_Server();
$server->setClass('Amf_Model_Test');
echo $server->handle();
class Amf_Model_Test
* return string
public function greet()
    return "hello";
AS SIDE:
public class main extends Sprite
private var _resp: Responder;
private var _nc: NetConnection;
private var tf: TextField;
private var _gateway: String;
public function main()
tf = new TextField();
tf.width = 500;
tf.border = true;
tf.borderColor = 0x0000FF;
addChild(tf);
      _gateway = 'http://cms.loc/amf';
_resp = new Responder(onResult, onFault);
_nc = new NetConnection();
_nc.connect(_gateway);
_nc.client = this;
_nc.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
_nc.call("Amf_Model_Test.greet", _resp);
private function onNetStatus(event: NetStatusEvent): void
trace(event.info['code']);
tf.text = "Status = "+event.info['code'];
private function onFault(result: Object): void
tf.text = "Fault = " + String(result);
private function onResult(result: Object): void
      tf.text = "Result = " + String(result);
In my browser, I get "Result = hello", as expected. In the stand alone player (which is exactly the same version) I get "Status = NetConnection.Call.BadVersion".

"Stand-alone" Installer Problems

Hi there.
I was hoping that there may be someone here who can advise me with a problem we are having with the stand-alone installer.
The problems we are having suggest that it is in fact not a stand-alone installer, although hopefully someone can prove me wrong!
After ADE is installed, using the stand-alone installer, no matter how many timnes I attempt to load a document, the DE detector tells me that ADE is not installed, and asks me to install. This is a never-ending loop. That's what happens in IE7.
In Firefox, the detector does detect it, but halfway through the install it fails.
The result of this is we can't open DRM protected eBooks on any of our open-access PCs due to ADE not working, even though we have installed it using the stand-alone installer.
All PCs are XP SP3, browsers are IE7 and FF3.0, and users log into the PCs with basic 'User' privileges. Student's 'My Documents' folder is mapped to a network drive when they log on.
Can anyone help?
Kind Regards,
Ian Lundell
University of Sunderland, UK

Open the "Console" application from Application/Utilities folder.
Select System.log from the log list on the left.
In the String Matching filter field, type Adobe AIR or Adobe Muse.
Odds are the console will display the path to where AIR is finding a beta version of Muse.
If that's not the case, pleaseelect all, and the copy and paste the log into a text file or e-mail and send it to us at [email protected] along with a link to this thread (for context).
Thanks.

Stand alone servers

Hi All
We have a weird situation and I think you guys can help me out.
I created two stand alone Managed server called ABC1 and ABC2 on a single domain. Where Admin and ABC1 is on one linux box and ABC2 is on other linux box.
Now my client want to deploy a single version of .ear application on both of the server. I know I can deploy the .ear one by one on both ABC1 and ABC2 through console.
But the concern we have is that is it feasible? I mean I think if i deploy the same .ear on two stand alone server then its going to failed because of conflict between jndi an all other resources.
Can any one help me out...
Thanks in advance.

Hi,
I am very Sorry for my Unclear statement. I will explain it again in another way.
We cannot Deploy exactly Same Application on two Different Servers...*From Admin Console<font color=red> One by One </font>(Means First time deployed and targeted to MS1 ...then again deploying the same app to Target MS2)*. In that case If we want to deploy the Same Application on two Non Clustered ManagedServers through AdminConsole...then We can do it At Once only(In a Single Turn...Later we can need to Just Add the New Targets Managed Servers to this application)...It Means While Deploying the Application we need to Choose MS1 & MS2 Both the Targets together. Now Suppose in future if you want to deploy the Same Application from AdminConsole to Third Managed Server ...then In that case you Add that ManagedServer as a New Target to the Application.
But Using ANT Build Script or Using WLST we can do it easily....Means Same Application can be deployed as many servers ...One by One as well as Together to all the independent Managed Servers at Once as well.
Regarding JNDI tree ....Yes Faisal's statement is very correct that..every Server has it's Own JNDI tree....Your Application should not cause any JNDI Conflicts there.
Once Again Sorry for My Unclear & Wrong Statement in previous post
Thanks
Jay SenSharma

Stand-alone DFS Share - Folder targets - wrong credentials

Similar Messages

Maybe you are looking for