Stand-alone konqueror, error.

Howdy guys,
Last night I had the wild idea that I wanted to use konqueror on this icewm-only box, so I installed kdebase and whatever else comes with it. when I try to run konqueror, I get this:
konqueror: symbol lookup error: /usr/lib/libkdecore.so.5: undefined symbol: qt_locale_initialized
Anybody know whether I'm missing something, or what I can do to fix this?
thanks.

I have no problems running konqueror in my IceWM currently, using a full kde install now.
Yet I remember it running flawlessly about two months ago having a base kde system only installed.
When you do a fresh start in your terminal, are there any hints when kbuildsycoca runs?
(See man kbuildsycoca4 for more info.)

Similar Messages

Stand alone exe errors using report generation vi's

I have a stand alone application that uses some report generation vi's. I have added the _wordsub.llb as a support file. In the main program I have told the report generations vi's where to find the _wordsub.llb so it can load the dynamic vi's as needed. The problem is when I run the stand-alone executable I get an open refernce error for one of the dynamic vi's that says that vi is not executable. But when I reconfigure the executable and include that vi as a dymaically loaded vi in addition to the _wordsub.llb, the stand alone works error free. Any suggestions?

It really depends on what version of office you are using. Some methods have different set of parameters or even different names, labview does not adjust them accordingly, even though the code might execute but it will fail during build process. You must reselect the methods manually in order to build the executable. Most time you need to build different executables for each office version.
-Joe

Stand alone application(.exe) : Error 7 occurred at Open File+.vi: Open File (error: L'erreur 7 s'est produite à : Open File+.vi:Open File)

Dear group members - as i am trying to build a stand alone application , i ran into this problem : "Error 7 occurred at Open File+.vi: Open File" (L'erreur 7 s'est produite à : Open File+.vipen File)
when i select continue i get this error message: "Error 7 occurred at open/create/replace file in Write spreadsheet string.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi"" ( "L'erreur 7 s'est produite à : Ouvrir/Créer/Remplacer un fichier dans Write Spreadsheet String.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi" )
i didn't get what's the problem with this vi, i have no problem running my VIs
Can any one here help me out ?
here is the project :

Neither can I. When I opened your Project, there were no VIs present on the top level. The Build Spec refers to a Mainv12, which I finally found buried in the folder Interface 2, but when I tried to open it, there were multiple missing VIs. I notice you have an Interface 2.llb -- is this the same as the VIs in the Interface 2 folder? If so, try getting rid of the .llb (at least for the purpose of sharing your code in the Forum) and re-post your code. As it stands, when I open your Project, virtually every entry is marked "Warning: has been deleted, etc." The fact that so much is "missing" means that I can't easily see/understand MainV12, hence can't guess where the File Not Found error is arising. Sorry.
Bob Schor

Error While Consuming Public Web Service through Stand Alone Proxy

Hi,
I am getting the below error when I am consuming a public web service through Stand Alone Proxy.
java.rmi.RemoteException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (407) Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ).
     at com.mindtree.examples.GlobalWeatherSoapStub.getCitiesByCountry(GlobalWeatherSoapStub.java:159)
     at com.mindtree.examples.GlobalWeatherSoapStub.getCitiesByCountry(GlobalWeatherSoapStub.java:168)
     at com.mindtree.examples.WebServiceClient.main(WebServiceClient.java:18)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (407) Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ).
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:903)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1346)
     at com.mindtree.examples.GlobalWeatherSoapStub.getCitiesByCountry(GlobalWeatherSoapStub.java:152)
     ... 2 more
Regards,
Venkatesh

Hi,
I am still facing the same issue.
Regards,
Venkatesh

Error while starting stand alone applicaitons in Web Center Content

Hi All,
I am getting this error while starting any standalone component in Oracle WebCenter Content Server :
WARNING: Jps platform factory creation failed. Reason: {0}.
java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-0
*0065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundExcep*
tion: oracle.security.jps.tomcat.JpsTomcatPlatformFactory.
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.ee.JpsPlatformFactory.getPlatformFactory(JpsPlatf
ormFactory.java:185)
at oracle.security.jps.ee.JpsPlatformFactory.getPlatformFactory(JpsPlatf
ormFactory.java:146)
at oracle.security.jps.internal.audit.AuditServiceImpl.initAuditor(Audit
ServiceImpl.java:319)
at oracle.security.jps.internal.audit.AuditServiceImpl.getAuditor(AuditS
erviceImpl.java:238)
at oracle.security.jps.internal.audit.AuditServiceImpl.getAuditor(AuditS
erviceImpl.java:373)
at oracle.security.jps.util.AuthZAuditUtil$3.run(AuthZAuditUtil.java:183
at oracle.security.jps.util.AuthZAuditUtil$3.run(AuthZAuditUtil.java:181
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.AuthZAuditUtil.initAuditor(AuthZAuditUtil.ja
va:181)
at oracle.security.jps.util.AuthZAuditUtil.isEventLoggable(AuthZAuditUti
l.java:136)
at oracle.security.jps.util.AuthZAuditUtil.auditAuthZ(AuthZAuditUtil.jav
a:427)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:554)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(C
sfUtil.java:643)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.getCred
entialMap(SspCredentialStore.java:497)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idc.conversion.jps.CSFKeyLoaderAction.run(CSFKeyLoaderAction.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at idc.conversion.jps.CSFKeyLoader.readKeys(CSFKeyLoader.java:166)
at intradoc.conversion.StandardKeyLoader.load(StandardKeyLoader.java:61)
at intradoc.conversion.SecurityObjects.loadKeys(SecurityObjects.java:528
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:133)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPas
swordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(Crypto
PasswordUtils.java:136)
at intradoc.server.IdcSystemLoader.managePasswords(IdcSystemLoader.java:
*3118)*
at intradoc.server.IdcSystemLoader.finishInit(IdcSystemLoader.java:396)
at intradoc.server.IdcSystemLoader.init(IdcSystemLoader.java:335)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:120)
at intradoc.apputilities.idcshell.InteractiveShellStartup.init(Interacti
veShellStartup.java:253)
at intradoc.apputilities.idcshell.InteractiveShellStartup.startup(Intera
ctiveShellStartup.java:52)
at IdcShell.main(IdcShell.java:27)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: oracle.security.jps.JpsException: JPS-00065: Jps platform factory cre
ation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.tomc
at.JpsTomcatPlatformFactory.
at oracle.security.jps.ee.JpsPlatformFactory$2.run(JpsPlatformFactory.ja
va:193)
at oracle.security.jps.ee.JpsPlatformFactory$2.run(JpsPlatformFactory.ja
va:186)
*... 41 more*
Mar 7, 2013 2:55:58 PM oracle.security.jps.internal.audit.AuditServiceImpl initA
uditor
WARNING: Failed to get server log directory. Reason: oracle.security.jps.JpsExce
ption: JPS-00065: Jps platform factory creation failed. Reason: oracle.security.
jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.
lang.ClassNotFoundException: oracle.security.jps.tomcat.JpsTomcatPlatformFactory
intradoc.common.ServiceException:
at intradoc.server.IdcServerManager.init(IdcServerManager.java:230)
at intradoc.apputilities.idcshell.InteractiveShellStartup.init(Interacti
veShellStartup.java:253)
at intradoc.apputilities.idcshell.InteractiveShellStartup.startup(Intera
ctiveShellStartup.java:52)
at IdcShell.main(IdcShell.java:27)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: intradoc.data.DataException: !apErrorWithTable,DocMetaDefinition
at intradoc.shared.MetaFieldData.initIndexes(MetaFieldData.java:171)
at intradoc.shared.MetaFieldData.init(MetaFieldData.java:84)
at intradoc.server.subject.MetaDataSubjectCallback.cacheMetaData(MetaDat
aSubjectCallback.java:42)
at intradoc.server.subject.MetaDataSubjectCallback.refresh(MetaDataSubje
ctCallback.java:35)
at intradoc.server.IdcSystemLoader.loadCachedTables(IdcSystemLoader.java
*:1255)*
at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:1164)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:132)
*... 10 more*
Caused by: intradoc.data.DataException: !syColumnDoesNotExist,dDecimalScale
at intradoc.data.ResultSetUtils.getIndexMustExist(ResultSetUtils.java:44
*7)*
at intradoc.shared.MetaFieldData.initIndexes(MetaFieldData.java:167)
*... 16 more*
Error with table 'DocMetaDefinition'.
The column 'dDecimalScale' does not exist in this table.
I am using 11.1.1.6 free version of webcenter content and using appropriate database with required tables created by RCU of appropriate version and also using required weblogic server.
Is there anything like , we are not allowed to use stand alone application in free version ? or problem is something else.
Thank you in advance.
Edited by: 957580 on Mar 7, 2013 2:01 AM

Hi Deepak,
Thanks for Reply.
But in /home/sapcs/conf/http.conf file its already maintained like this, sending you some part of httpd.conf file
Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the #<VirtualHost> # directive.
Change this to Listen on specific IP addresses as shown below to prevent Apache from glomming onto all bound IP #addresses.
Listen 1090
User/Group: The name (or #number) of the user/group to run httpd as.
It is usually good practice to create a dedicated user and group for
running httpd, as with most system services.
User sapcs
Group sapsys
</IfModule>
</IfModule>
even after restarting server i am getting same problem
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
I am using a non root user to start apachectl command
Regards
Gagan Sharma

Error in obtaining token using TokenManager thru a stand-alone java appln

I am trying to use the IS Java APIs to connect to the directory server and insert a user in the directory from a stand alone java appln.
I get an SSOException while trying to obtain a Token object from the TokenManager (TokenManager.createSSOToken() method ).
Following is the dump of the error:
Exception Message: LDAP authentication failed.
com.iplanet.sso.SSOException: LDAP authentication failed.
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProv
iderImpl.java:94)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:2
57)
at SampleUserOperations.main(SampleUserOperations.java:51)
However, the principal and password supplied in the code are correct. Following is the code that generates this error.
public static void main(String[] args)
          int count = 0;
          SSOTokenManager Manager = null;
          SSOToken Token = null;
          AMStoreConnection AMConn = null;
          try
               //create a token
               Manager = SSOTokenManager.getInstance();
               System.out.println("Got a token mgr");
               Token = Manager.createSSOToken(new AuthPrincipal("uid=admin,ou=administrators,ou=topologymanagement,o=netscaperoot"), "abcdefg123");
                              System.out.println("Got a token");
               AMConn = new AMStoreConnection(Token);
               System.out.println("Got a conn");
          catch (com.iplanet.sso.SSOException e)
               count++;
               System.out.println("COUNT = " + count + " : " + e);
The credentials provided in the code are correct. What could be the cause of the error?
TIA,
siddharth.

Tthis class is undocumented and this is the reason why you will not find any documentation. This is not the correct way for a client to authenticate to the is in v6. You need to use the JAAS API. I do not believe that the AuthPrincipal sample works in 6.
The package for the class is com/sun/identity/authentication/internal/
rdgs
Steve

Error building stand alone application, with LV.7.01

Hi to all....
I always get this pop up error (see picture attached) when trying to build a Stand alone application. I got the full version of Labview 7.01 and the Application builder also. the runtime engine is also 7.01.
Regards
HFZ.
HFZ
Solved!
Go to Solution.
Attachments:
Error Building App.JPG ‏51 KB

Hi GardW
All comm. problem are handeled.
The problem was based on the destinations for the .VI's.
Labview 7.1 isn't so got to manage these. It's something the user got to be carefully about.
Allmost solved. But now can't get the default 'labview Icon' to my finnished Application. You know... when you make a stand alone application..
then somewhere under the building process... you can choose if you want your own Icon added as the application starter icon! If you don't choose any.. Labview makes the Labview Icon as your application starter Icon.
And that is my problem now. Any ideas???
Thanks for trying to help , i appriceate it !!
Regards HFZ
HFZ

Stand alone client for remote EJB corba error

Regarding problem below, I've checked System env variables
that weblogic server is using for CORBA classes:
javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
org.omg.CORBA.ORBClass weblogic.corba.orb.ORB
javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
But these are server classes and not found in wlclient.jar and wljmsclient.jar. What classes should be used for client? What needs to be set in order to get successful remote RMI/EJB call to weblogic server?
Original post:
I have a stand alone spring client for simple stateless session EJB deployed on weblogic 9.2. I'm using spring (jdk 1.5) to call this remote EJB and the only way I can succeed is to have full weblogic.jar in my bootstrap classpath. Otherwise I get corba error:
CORBA BAD_PARAM 0 No; nested exception is:
org.omg.CORBA.BAD_PARAM: vmcid: 0x0 minor code: 0 completed: No
Interestingly, within same client I have JMS call to weblogic JMS and that fails if weblogic.jar is in boot classpath. Getting rid of weblogic.jar from boot classpath works if I have wlclient.jar and wljmsclient.jar in regular classpath (as per weblogic docs). I would think that for stand alone client all I would need is to weblogic client jars, why should I need to have full weblogic.jar?
I can't get those work together with same classpath. I wonder if anybody has some pointers and/or advice. I was looking to set system parameters for corba for weblogic client that maybe could help:
org.omg.CORBA.ORBClass
org.omg.CORBA.ORBSingletonClass
javax.rmi.CORBA.UtilClass
javax.rmi.CORBA.StubClass
javax.rmi.CORBA.PortableRemoteObjectClass
But I can't find definitive answer.
Regards,
-pp
Edited by mr.papini at 06/28/2007 9:05 AM

I'm stuck exactly with the same issue while trying to port my application from weblogic to jboss.
I tried to specify different ORB implementations (JacORB, OpenORB) for jvm option org.omg.CORBA.ORBClass, but JBoss couldn't get them instantiated. Native Sun implementation which is used in JBoss by default and can be instantiated, apparently is not fully compatible with weblogic security module.
So did you manage to find out the solution?
Edited by DigitalDude at 04/09/2008 11:47 PM

Error 10403 when using Stand-Alone Application and DAQPad 6020E

On the computer I have LabVIEW on, I can run my VI and also I can run the stand alone application of that VI. But I can NOT run the stand alone applicaiton of that VI on a 2nd computer with out LabVIEW. I get error # 10403. I belive I build the VI correctly and loaded the proper software/driver because I have found I can run a simple stand alone application VI that does not communicate with my DAQPad 6020E. The second computer does reconize the DAQPad 6020E under the Divice Manager. I tried using differnce divice numbers for the AO and AI...

Hi,
The first thing you need to check is make sure the same DAQ driver is installed on both computers. Then, you need to make sure that you can view the device in the Measurement and Automation Explorer (MAX). Once you can do this, then you will need to make sure the LV Run-Time Engine is installed on the stand-alone comp. This needs to be the same version as LabVIEW that is installed on the computer where the application was developed.
I hope this helps.
George

Error when execute Stand Alone Server

Hi All,
After installation Java Development Environment Release 6.20. I tried to execute the Stand Alone Server, but this error message occured:
Loading core services:
Starting core service monitor ... done.
Starting core service p4 ... done.
Starting core service log ... done.
Starting core service dbms ... done.
Starting core service security ... done.
System Exception * Fail to start Naming. Exception is: java.security.AccessContr
olException: access denied (com.inqmy.lib.security.DomainsEnumerationPermission
ProtectionDomainEnumeration)
java.security.AccessControlException: access denied (com.inqmy.lib.security.Doma
insEnumerationPermission ProtectionDomainEnumeration)
at java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java:269)
at java.security.AccessController.checkPermission(AccessController.java:
401)
at com.inqmy.core.policy.PolicyManager.getProtectionDomainStack(PolicyMa
nager.java:311)
at com.inqmy.core.service.context.container.security.DefaultProtectionDo
mainContext.getProtectionDomainStack(DefaultProtectionDomainContext.java:99)
at com.inqmy.services.security.domains.ProtectionDomainManagerImpl.getPr
otectionDomainStack(ProtectionDomainManagerImpl.java:96)
at com.inqmy.services.jndi.InitialContextFactoryImpl.getInitialContext(I
nitialContextFactoryImpl.java:72)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
62)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:175)
at com.inqmy.services.jndi.JNDIFrame.bindReferences(JNDIFrame.java:278)
at com.inqmy.services.jndi.JNDIFrame.start(JNDIFrame.java:176)
at com.inqmy.core.service.application.ApplicationServiceRunner.startFram
e(ApplicationServiceRunner.java:55)
at com.inqmy.core.service.container.ServiceRunner.run(ServiceRunner.java
:126)
at com.inqmy.core.thread.impl2.SingleThread.run(SingleThread.java:118)
Starting core service naming ... done.
Please Help.
Warm regard,
Edward.

The error is caused by JDK 1.4.*
Thank you
Edward.

Stand-Alone application with LabView 7.0 getting error can't find DAQmx clear task.vi

I have attempted to create a stand alone vi with the Build Application or Shared Library(dll) in LabVeiw 7.0
When I put it on another PC to test it I get the error "can't find DAQmx clear task.vi"
the other PC has Labview 7.0 and DAQmx 8.1 also.
I believe my problem is in the source tab where you are supposed to add support and dynamic vi's I have search the forums and Ni's data base and have not found a solution.
Solved!
Go to Solution.

Hi LabTech09,
When you run the executable on the other computer is when you get this error? Do you have the exact same versions of LabVIEW and DAQmx on both computers? Does the dialog allow you to navigate to the DAQmx clear task.vi? If so, you can find these VIs in C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb. Does the executable work on the development machine (the machine it was compiled on)?
Regards,
Jim Schwartz

AD LDS Stand Alone SSL gives error 81 (x51) when trying to connect with LDP.exe 3.0

I have a stand alone instance of ad lds on win server 2008 R2. Using ldp.exe 3.0 I CAN do a NON-ssl connection and eventually a bind using servername or the fqdn which is the servername followed by a period (i.e servername.) or using the
IP address. Note that the server is in a workgroup (not a domain).
However, when specifying the ssl port, ssl checkbox and any of the following servers in LDP.exe:
servername
servername. (note the trailing period)
ip addr
I get:
ld = ldap_sslinit("SRV9.", 50001, 1);
Error 0 = ldap_set_option(hLdap, LDAP_OPT_PROTOCOL_VERSION, 3);
Error 81 = ldap_connect(hLdap, NULL);
Server error: <empty>
Error <0x51>: Fail to connect to SRV9..
For SSL I expected the IP addr to fail because it has to be the FQDN. I expected the servername + period to work because it has on similar ad lds instances in the past.
I verified that the port is correct using dsdbutil. I have also tried changing the port using dsdbutil. Could this mess anything up if I specify that port in ldp.exe?
I have used the mmc certificate snap in to validate the certification path. The rootCA and subCAs are valid and work on other websites.
Under the details tab I have validated:
Issuer
Valid dates
Subject is SRV9
the template is WebServer
Server Authentication (1.3.6.1.5.5.7.3.1)
I have put the server cert in both the machine and service (for my ad lds instance) under the Personal store. I also have put the two "parent" CA certs in the Trusted Root Cert stores for both the service and the machine.
Additionally, here is some partial output from netstat -ano on the ADLDS machine:
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:50000          0.0.0.0:0              LISTENING       1256
TCP    0.0.0.0:50001          0.0.0.0:0              LISTENING       1256
TCP    [::]:50000             [::]:0                 LISTENING
1256
TCP    [::]:50001             [::]:0                 LISTENING
1256
UDP    10.200.41.75:40000     *:*
1280
UDP    10.200.41.75:50000     *:*
1256
UDP    127.0.0.1:59087        *:*
1256
UDP    127.0.0.1:59088        *:*
1280
UDP    127.0.0.1:59097        *:*
1300
UDP    [2001:0:9d38:90d7:245d:2f39:f537:d6b4]:40000 *:*             1280
UDP    [2001:0:9d38:90d7:245d:2f39:f537:d6b4]:50000 *:*             1256
UDP    [fe80::245d:2f39:f537:d6b4%13]:40000 *:*                     1280
UDP    [fe80::245d:2f39:f537:d6b4%13]:50000 *:*                     1256
UDP    [fe80::bd46:2e7e:708c:1c3a%11]:40000 *:*                     1280
UDP    [fe80::bd46:2e7e:708c:1c3a%11]:50000 *:*                     1256
Also Taskman reveals:
PID
1256   dsamain.exe   ADLDS
1280   dsamain.exe   ADLDS (another instance that I am not using)
1300   AD Webservices
MY pid is 1256. Port 50000 is non-ssl, 50001 is SSL. I have no idea what port 59087 (attached to my pid) is for.
Thanks!
leo

Lee you rock! Thanks!!
My problem was the missing read permission. I modified the instructions a bit from your link for Windows Server 2008 R2 for the permission issue:
To grant the Read permission on the server authentication certificate to the Network service account
First go into control panel > Folder Options and turn on view hidden files.
Navigate to the following default directory where the installed or imported certificates are stored:
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
Right-click the appropriate server authentication certificate, and then click
Properties. I see a strange filename convention. I just sorted the files by date and picked the latest one. Not sure how else to do it. Can someone please tell me the file naming convention of these files in MachineKeys?
On the Security tab, click Edit.
In the Permissions dialog box, click Add.
In the Select Users, Computers, or Groups dialog box, type
Network Service, and then click OK.
Turn off view hidden files in control panel Folder Options.
leo

Errors in stand-alone Sharepoint 2013 trial

Hi there, I have installed the stand-alone trial of Sharepoint 2013 on our Windows Server 2008 R2 Enterprise machine, Service Pack 1.
When I click on the 'Sites' link at the top right, I get the error:
"Not Found
The requested URL /my/_layouts/15/MySite.aspx was not found on this server."
And I get similar errors for any of the links at the top right: 'Newsfeed' and 'SkyDrive'
I have four Web Applications set up:
SharePoint - 20103 http://cr-dc-vygr01:20103/
20103
SharePoint Central Administration v4 http://cr-dc-vygr01:29235/
29235
Testing456 http://cr-dc-vygr01:8888/
8888
SharePoint - 9665 Currently Selected http://cr-dc-vygr01:9665/
9665
Could you please advise what might be wrong?
Many thanks,
Simon

look like your MySite host and UPA is not configured properly.
Central Admin > Application Management > Manage Services Application...On this page check if the User Profile service is listed their. Click on USer profile services, and check the configuration.
Follow the instruction below to configure Mysite and UPA
http://www.c-sharpcorner.com/UploadFile/Roji.Joy/how-to-configure-user-profile-service-and-my-site-in-sharepo/
http://www.c-sharpcorner.com/UploadFile/Roji.Joy/configure-user-profile-service-and-my-site-in-sharepoint-201/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Stand-alone application generates error with function 'Ramp Pattern' (bug in application builder?)

Hello,
in my program a main.vi links to a sub-VI via 'open VI reference' and 'invoke node'. In this sub-VI the function 'Ramp Pattern' is used. The program itself runs normally, but if I build a stand-alone application using application builder I get an error message 'error 1003 occurred ..'. I believe this error is directly related to the build specifications which are as follows: the main.vi is referenced in a main build specification, the sub-VI in its own specification where the target is a LLB.
I appended an example-program that exhibits the error (when executing 'Application.exe' and pressing 'calculate ramp'). The error does not occur when disabling the 'ramp pattern' function and rebuilding the application.
I would rate this to be a bug in the application builder and would appreciate any help on how to solve this problem. However, due to the structure of the whole program the sub-VI has to remain in its own LLB.
Attachments:
RampPattern.zip ‏198 KB

There can be reasons why a VI might appear broken when loaded from an executable. For example, if you have different versions of the same VI or enum that differ in such a way as to break the calling VI, that can cause a broken arrow when loaded from the executable. If you have DLLs being called and the runtime engine can't find the DLL, that can cause a broken arrow that you might not see otherwise. Finally, there is a bug related to a VI appearing broken when its not.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Need help in creating a web application that runs on a stand alone sys.

I am planning a small java web application complete with database. I need to know if there are any ways to deploy that application on a stand alone system and that if there is any way to make an executable for that application so that the user need not go through the process of deploying the app and starting the server whenever he restarts the system. Can anyone help me in this regard? Thanks in advance.

Hi Alex,
Since I had a Gmail test servlet kicking around, I ran it on the latest V3 nightly build.
On the first run, I encountered the following nested exceptions:
javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465
--> java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
--> java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
--> java.security.UnrecoverableKeyException: Password must not be nullThe UnrecoverableKeyException is a manifestation of [https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938|https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938]
I worked around this by adding the following JVM config options to domain.xml
<jvm-options>-Djavax.net.ssl.keyStorePassword=changeit</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStorePassword=changeit</jvm-options> (Note: the default master password is "changeit")
These lines are placed in /domain/configs/config/java-config of domain.xml for the particular server config you're using. There's only one server config in the default domain.xml shipped with V3. Then restart the server.
I retested the code on both port 465 and 587, with and without the above config changes. Without the change, they both fail the same way, and with the change, they both work. Let me know if this helps.
-Peter

Stand-alone konqueror, error.

Similar Messages

Maybe you are looking for