Standalone applications in labview evaluation version

Can I make Standalone applications in labview 8.6 evaluation version??
Can this application work on other computers which do not have labview installed??

You cannot because in the evaluation copy there is no application builder.
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome

Similar Messages

Is it possible to download the LV code to pda in LabVIEW evaluation version?

Is it possible to download the LabVIEW code to pda in LabVIEW evaluation version?
For example:
I want to select New » Targets and Devices from the shortcut menu to open the Add Targets and Devices dialog box as shown in the below Figures.
Is it possible to do the same in evaluation version of LabVIEW 8.0

Prasada,
In order to target a PDA device, you will need to have the PDA module installed. Fortunately we do have evaluation software also available for the LabVIEW PDA Module 8.2. Once this has been installed, you should be able to target your PDA device. Please post back if you experience any trouble. Thanks,
Mike D.
National Instruments
Applications Engineer
Message Edited by Duffman Says: on 11-21-2006 04:59 PM

Error 1 when building my application in Labview 2010 Version 10.0f2

I am getting the following error trying to build my application in Labview 2010 Version 10.0f2 and I get the following error:
Error 1 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
Method Name: Linker:Write Info To File
I have searched and can find no real sollutions to this problem. I did the updates and still nothing. Now I can't even build an app with Laview 8.6. I reference several .NET items and refuse to rebuild each and every one of them. My only option at this point is to uninstall all Labview and then reinstall 8.6 so I can do something.
Help if you can.

Hello RBrown
I am really sorry for this inconvenience! This is a known issue.
Can you please attempt the following for me:
When you are building an application, under Advanced please check the last box "Use LabVIEW 8.x file layout"
If that doesn't work, you may need to rebuild the LLB in a separate directory with new names, and use it as the build inclusion.
Here are some forum posts strictly for your information:
I have found users that have had similar issues. I am trying to make this workaround work for you.
http://forums.ni.com/t5/LabVIEW/error-1052/m-p/912192
This is a known issue that some customers have already commented on:
http://forums.ni.com/t5/LabVIEW/NI-Please-don-t-put-illegal-vi-names-in-your-toolkits-thanks/m-p/745...
I have filed a corrective action for this issue and I will add you to the list of individuals who need this issue resolved.
Sincerely,
Greg S.

Standalone application without labview ?

Hi
I am trying to build an .exe file using application builder in LabVIEW 7.0. Is it possible to build an application without labview dependency ? In short, I want something like an .exe file which will run on systems without labview. I know visual basic has this facility. Please let me know.
Thanks
Sridhar.
Kudos always welcome for helpful posts

"Maximus00" <[email protected]> wrote in message news:[email protected]..
> . . . I wanted an option where he can view my application without having
to install anything on his PC. Looks like that is not possible ? Am i right
?<br><br>Sridhar.
You are not right. It is possible. With LV 7.0 and previous versions (I
don't know if this still works for 7.1), the executable will run correctly
if lvrt.dll and the other support files are in the same directory. So you
could, for example, put your executable on a thumb drive. Copy all files
and folders in the C:\Program Files\National Instruments\shared\LabVIEW
Run-Time\7.0 directory to the thumb drive as well. Then your supervisor
could just run the program from the thumb drive without copying anything to
his computer. Or, if you want the drive back, he could copy the entire
contents to his drive without using an installer.
But this begs the question, if your supervisor is evaluating executables you
are creating in LabVIEW, what's the problem with installing LV Run-Time on
his computer?

Labview evaluation version for linux

Sir i need evaluation version of labview for linux. kindly provide me
hyperlink if any, other wise provide send me CD for evaluation, if
feasible.
My postal address is
Murad Ali s/o Bagh wali
village and p.o babuzai.abakhel.pulha
distt and tehsil Mardan, NWFP, Pakistan
regards

Unfortunately, we do not currently offer an evaluation version of LabVIEW for Linux. We do offer evaluation versions of LabVIEW for Windows, so if you have a Windows system available, you can evaluate LabVIEW there. With the exception of a few Windows-specific features, the Linux version of LabVIEW is identical in both layout and functionality.
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

Using LabVIEW 7.0 Evaluation version

Hi all
I Installed the LabVIEW Evaluation version in "Evaluation Mode".But I've just open and created a new Vi once.When I open it again,I get an error message that it is expire.I think it just expire after 30 day.Can you help me about this problem.
Thanhks all

Hi anhdung,
From the posts that I've read, it appears that it has to do with the system clock settings. However, I could not open the information in the Knowledge Base. You may want to contact NI on this one.
However, please have a look at the links below:
http://forums.ni.com/ni/board/message?board.id=170&message.id=64272
http://forums.ni.com/ni/board/message?board.id=170&message.id=46557
You may want to try what is recommended below
http://forums.ni.com/ni/board/message?board.id=180&message.id=3088
Ray

Strange current VI`s path returned in standalone application

I know that there is a difference in the path returned when using the "Current VIs path" in the development environment and in a standalone application, but this is not what I had expected: This is the path returned from the Current VIs path in the standalone application:
C:\LabView-programmer\RADHAZ-programmer\RADHAZ\builds\rad.exe\RADHAZ-programmer\RADHAZ\rad.vi. Why is this the correct path to the VI?
If I strip this path once, and build a new path with the name of my dynamically called VI I get: C:\LabView-programmer\RADHAZ-programmer\RADHAZ\builds\rad.exe\RADHAZ-programmer\RADHAZ\instr.vi. It starts from this path, but It won`t load some text-files located at C:\LabView-programmer\RADHAZ-programmer\RADHAZ\builds\kal-data without making changes to the instr.vi.
I tried to used the App.Dir property to find the correct top level directory, and it returns C:\LabView-programmer\RADHAZ-programmer\RADHAZ\builds as expected. But this is not the path that the dynamically called VI need.
Any suggestions is appreciated..
I searched for a detailed tutorial for setting up the build specification, but didn`t find any that helped much.
Gunnar
Solved!
Go to Solution.

HI Gunnar,
have you tried the last point of the Advanced AppBuild settings as described in the help?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Standalone application for data acquisition using NI DAQ card

I have made a standalone application in labview GUI for data acquisition and signal processing. if i have to run this application in any other computer what all softwares should be installed other than labview runtime engine...NI DEVICE DRIVER CD alone is to be installed or do i have to install any other software for data acquisition using NI daq card??
thanks and regards
Solved!
Go to Solution.

You should only need the run time engine, The device drivers for the device, maybe need VISA drivers if you are doing serial or something of that nature, You may need the channels or tasks created in NI measurements and automation if you created them there.
There may be other things that you will need depending on what you include in your code and what tool kits that you have installed.
Tim
Johnson Controls
Holland Michigan

Building standalone applications?

Hi !
I am trying to build standalone applications in LabView, and I wonder is
this possible?
I have the application builder in LabView 5.1 with Imaq 4.01.
-- Sincerely
Roger Ohlund, Engineering Physics F95
Lovsele 83, 930 10 Lovanger
Sweden
Tel. +46 0913 410 41, +46 070 33 33 543
mailto:[email protected]
mailto:[email protected]
http://www.acc.umu.se/~angler/

Bing,
From your previous posts it looks like you would like to download your FPGA VI to your cRIO modules and then have the application run at start up without the need of a PC to initiate the start. If this is what you are intending it is possible to download an FPGA VI to the Flash Memory of an FPGA Device. Instructions for this can be found by launching the Embedded Project Manager and selecting Help >> VI, Function, How to Help >> FPGA Module >> Running FPGA VIs >> Downloading FPGA to Flash Memory. This should work well if you are intending to run application as completely stand alone. Since there will be no communication with the host there would be no need for a Host Vi and the you would only need the FPGA vi to run the application.
Are you intending to create an application that will not communicate with a host PC or were you wanting to create and executable that you could distribute?
Steven
Applications Engineering
National Instruments

LabView 6.0 Evaluation version load error (20)

Hi,
I wrote three vi files in LabView 6.0 evaluation version. Afte instaling the 6.1 full version the vi could not be load, giving a code 20 load error. All other vi files loaded normally.
I could not find any special instructions in these files.
Any ideas?
Yossi
Attachments:
Bessel_Function_j(x)-Spheric-011009.vi ‏146 KB
Read_From_V8_File.vi ‏58 KB
Read_File+_[V8].vi ‏67 KB

Yossi,
Refer to the following KnowledgeBase on our website:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5654f94cdf5954ff86256b37006758c0?OpenDocument
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

How can i measure only the valley voltages of a sine wave in labview 7 express evaluation version?

I am trying to convince my company to send me to purchase labview and send me to classes for labview.
I am trying to put together a small demo for them using the Labview 7 express evaluatin copy that I recieved.
What I am wondering is how can filter out everything besides the valley peaks on a sine wave.
What I am trying to accomplish, is create an example showing that Labview can sameple from a sine wave, read about 5 "valley" points of the wave, evaluate these based on a value that i can define, and signal pass or fail.
attached is a picture of what i have so far
Ryan
LV 7.1
Attachments:
progress.bmp ‏3841 KB

Hi,
I built a VI using LabVIEW 7.0 that detects the valleys in a sine wave. It uses the 'Peak detector' VI that I believe is available in the evaluation version.
(Functions palette >> All Functions >> Analyze >> Signal Processing >> Time Domain >> Peak Detector)
I have attached a VI as well as the screen shots its front panel and block diagram.
I hope this helps.
Sincerely,
Feroz
Attachments:
valley_detector_bd.jpg ‏36 KB
valley_detector_fp.jpg ‏72 KB
valley_detector.vi ‏29 KB

Does Instrument I/O Assistant only work in the activated version of LabView 8.0 and not in evaluation version?

I'm using the LabVIEW 8.0 evaluation CD and every time I try using the Instrument I/O Assistant I get this error message "Measurement and Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from the LabVIEW Driver CD." So I tried installing both from the Device Driver CD and still it didn't work. I also tried uninstalling all NI softwares and components and reinstalled everything from the LabVIEW evaluation CD and Device Driver CD and still the same result.
I was wondering maybe the Instrument I/O Assistant will only work after I activate LabVIEW. Is this the reason why I can't use it or does Instrument I/O Assistant also work even if I'm only using the evaluation version? Please help!

Glynster -
Yes, Instrument I/O Assistant does work with the evaluation version of LabVIEW 8.0. However, you need to install Instrument I/O Assistant from a version of the National Instruments Device Driver CD that shipped with LabVIEW 8.0 (or later).
NOTE: The link provided for Instrument I/O Assistant 1.0.1 DOES NOT work with LabVIEW 8.0. It is only for LabVIEW 7.x.
You will need to obtain a Driver CD to get Instrument I/O Assistant to work with LabVIEW 8.0
-Tommy

ActiveX not working with LabView 6.0i Evaluation Version

I am trying to run some ActiveX container samples in LabView 6.0i Evaluation Version.But it is not working and no error message is displayed. Is ActiveX supported in LabView 6.0i Evaluation Version.

[email protected] (pl) wrote in <506500000008000000CD610000-1031838699000
@exchange.ni.com>:
>I am trying to run some ActiveX container samples in LabView 6.0i
>Evaluation Version.But it is not working and no error message is
>displayed. Is ActiveX supported in LabView 6.0i Evaluation Version.
>
Don't know for sure, but with the Student editions this is certainly the
case so it is possible.
The student editions do not allow:
1.AxtiveX
2.External Code (DLL's, CINS)
3. and somethjing else that escapes me at the moment.
Try simple examples such as the MSBrowser and the Adobe PDF reader AX
controls - these always work if Ax is going to work at all.
Not a solution, sorry ;-)
cheers, Alex.
Alexander C. Le Dain, PhD
ICON Technologies Pty Ltd
http://www.icon-tech.com
.au
* The LabVIEW FAQ http://www.icon-tech.com.au/thelabviewfaq.html *

How do I install LabVIEW 6.0 over the evaluation version? I can't un-install the evaluation version.

I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?

I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
>

Evaluation version of Oracle Applications

Hi all,
is it possible to download a evaluation version of Oracle Applications? (like it is possible for the Oracle Database)
I would like to take a look at the features of Oracle Financials (Oracle General Ledger)
Thanks
Walter

Yes, there is :)
1) Go to "Oracle's Certification Matrices"
http://www.oracle.com/technology/support/metalink/index.html
2) Click on "View Certifications by Product"
3) Select "Desupport Advisories and Notices"
4) Select "E-Business Suite Desupport Notices"

Standalone applications in labview evaluation version

Similar Messages

Maybe you are looking for