Standalone ITS 6.20 support?
How long do you expect that standalone ITS 6.20 will be supported? I know that the FAQ says "long term" but it said that the integrated ITS in 6.40 will only be supported through 2009. We're hearing that standalone ITS 6.20 is "going away". Can you provide any more specifics on the support end date for ITS 6.20?
We need to know because we are considering moving applications from ITS 6.10 to ITS 6.20 but we might do something different if support for ITS 6.20 will be going away soon.
Hello Krista,
As Henning said, the ITS 6.20 is planned for long term support. I don't think support of ITS 6.20 should be the major concern as there are other considerations you should make when deciding on which ITS (integrated or external) to use for your upgrade. For instance:
- Ease of maintenance. The Integrated ITS is usually easier to maintain as updates and upgrades can be done to the entire SAP system and you will need one less server.
- Future compatibility with SAP systems. Note that a 7.00 kernel system cannot be accessed using an ITS 6.20. Please see "Platforms and FAQ" in http://service.sap.com/sap-its for more details.
- Support for your applications. Please check that the applications you plan to use are supported on your target ITS version.
I'm sure there are others, but that should get you started.
Edgar
Similar Messages
-
Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.
Nevermind, I got it working.
I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed. -
HT201363 email that says its from itunes support
I keep receiving an email that says its from itunes support that says "warning! we need a little verification from you or your account will be closed" - is this a legitimite email?
http://support.apple.com/kb/HT2075
http://support.apple.com/kb/HT4933 -
Migrating from standalone ITS to internal ITS u0096 copy existing templates
Dear Sirs,
I am in the process of migrating from Standalone ITS to the internal one. I have found several documents on the issue and the help section for the migration, http://help.sap.com/saphelp_nw04/helpdata/en/cd/8a424089ff2571e10000000a155106/content.htm
Currently I am using a standalone ITS server, 6.20 PL13, to access/run IAC components on ERP2004 server ZXY. In the new setup I wan to run the internal ITS on server ZXY instead.
I have however a question regarding the process. Step one in the process is to Copy the existing templates.
If I enter the transaction SE80, I am not able to see all of the IAC component names which are referenced in my portal iViews. I therefore assume that the ones which does not show up, has not been converted properly.
I therefore go into transaction SIAC1 to look for them there (as described in ITS New storage structures as of Web SAP AS 6.40, 678904), but I am however unable to find them there either.
Do I have to go the current ITS server and somehow copy the files/IAC manually (save on disk), and then upload then with SIAC_UPLOAD (from se38) onto the R/3 system. Or do they exist already on my R/3 system just that they arent shown?
Could a solution be that the name of the IAC component in the portal iview, differs from the name actually used in the R/3 system.
Any pointers or hints on this issue are appreciated.
Best regards,
JørgenDeepak Sharma,
Thank you for your reply. But I have already published the services internally and actually have used the 'webgui' service successfully. What I am trying to do now is to copy the custom services (there are only 2) to the integrated ITS from my standalone ITS server. -
Portal 7 connection thru standalone its SSO connection problem
how can i connect to r3, thru standalone its with SSO
Hi,
If the question is regarding System connection. Below are the steps
1. Login to portal --> System adminitration --> System configuration --> System Landscape .
2. right click on the portal content folder and create new system from template
3. goto property, WAS and fill in the message server and port of the R3 system
4. goto property, User admin --> SaplogonTicket, and mapping fields as admin,user
5. goto property, Connector --> fill in the message server, r/3 system id, client, msg port, logon group.
5. goto system alias and add a alias.
Also check out
http://help.sap.com/erp2005_ehp_02/helpdata/en/0d/17df3d2cae445ae10000000a11405a/frameset.htm
Regards,
Thulasi -
TS1424 i was not able to activate my new email id its contact itunes support
i was unable to activate my new email id its asking contact itunes for support
my new email id was [email protected] kindly help usYou should contact iTunes Store Customer Support for assistance in this matter. You can do so via http://www.apple.com/support/itunes/contact/
You should provide the Apple ID you are attempting to set up your account with and the complete text of any and all error messages you may be receiving. -
Standalone ITS 6.20 - wgate install - web instances not all visible
When trying to install an ITS Wgate (dual host), I am not seeing all available IIS instances during the install process. Only 4 of about 10 available are there when I am at the point of designating which IIS site the ITS Wgate instance should use. I haven't seen this before and am trying to understand why some would not appear in that list.
Hello David,
are you talking about Administrator? But what about the IIS administrator? I am not sure if Adminstrator also has fully privileges for the web server.
With best regards,
T. J. Domsalla -
Configure standalone 1250 AP to support 802.11n
Been searching this forum about 802.11n setup. So far, I learned (from this forum) that to support 802.11n, I must use WPA2/AES (or open auth), and I need to ensure WMM is enable.
Q-1. Besides the above two, are there any other requirement I need to address in my configuration?
Q-2. Do I have to enable both 2.4Mhz and 5Mhz radio for 802.11n performance?
Q-3. Is there WPA2/TKIP option? If so, would this option support 802.11n? Or, it has to be WPA2/AES?
Q-4. From the command line, how can I verify if I have WMM enable?
I have read the 1250 AP Configuration guide, but I don't see specific discussion/chapter about 802.11n. If there is any good reading I can do, please let me know.
Thanks.I will try to answer your questions:)
Q-1. Besides the above two, are there any other requirement I need to address in my configuration?
You need to configure 40mhz channel width in the AP 802.11a radio
Q-2. Do I have to enable both 2.4Mhz and 5Mhz radio for 802.11n performance?
Only enable 'N' on the 5ghz side due to only having 3 non-overlapping channels on the 2.4ghz
Q-3. Is there WPA2/TKIP option? If so, would this option support 802.11n? Or, it has to be WPA2/AES?
AES is the supported encryption standard for 802.11N.... not TKIP. WPA2/AES or OPEN is your only option
Q-4. From the command line, how can I verify if I have WMM enable?
show wlan
Issue the config wlan wmm {disabled | allowed | required} wlan-id command in order to enable WMM mode -
Where is the standalone installer in the support web site?
I get "This disk cannot be used to start up your computer" when I use installer downloaded from the App store. This is on the volume I have started 10.6.8 (Snow Leopard) from. May work better from USB or CD/DVD.
There isn’t a “standalone” installer. The App Store one is the only one.
Open Disk Utility, select your Hard drive device (not the Macintosh HD Volume on the device).
At the Bottom of the window look for Partition Map Scheme:
If it says APM or Apple Partition Map, you need to re-partition your drive using GUID Partition Map (GPT). Yes, that will erase the drive.
If that is the case, we can walk you through the settings to alter the partition map. -
But the Firebox is still being recognized. Anyone know how to make this work? Hate to not use my expensive equipment simply becuase of a operating system upgrade.
Welcome to Apple Support Communities
Lion and Mountain Lion aren't compatible with PowerPC apps. If you want to run those apps, you have to update them to the most recent version or install Mac OS X Snow Leopard.
As you upgraded to Mountain Lion, you can make a second volume on your hard disk and install Snow Leopard there, so you will be able to run those apps. In this case, the virtual machine solution isn't valid because the virtual machine doesn't provide enough performance to run that type of app or they will run better in a second volume.
If you need help to create the volume, read > http://pondini.org/OSX/DU3.html -
4-year period expired on 12-th of December.
I have applied to an official Apple service on 4th of December with this problem with nvidia-8600 chip that was confirmed by the official Aplpe service.
I have a document that confirms the purchase date.
It was sent to Apple by the official service and they refused.
What we have is that Apple does not respond to obligations and all it declares can be considered as lie.The details:
Repair Confirmation Number: G141323406
Serial Number: W8******YJX
Reason for cancellation: Part is out of range, It does not qualify for quality program.
<Edited By Host> -
I bought i tunes card but in the app i cannot buy from it and when i click buy it deny it says contact support
Do exactly what it told you to do;
Contact itunes support -
my question is how do my kodak 5250 printer work with my imac 21.5 os lion
What steps have you take to install the printer and how are you connecting it? Please answer both questions!
-
Does SAP stop/terminate ITS support in the future? - truth or just gossip
I've heard a gossip about SAP will terminate the ITS functionality in the near future.
Does anyone know something exact about this theme, what is the SAP official slant in this question?
If it is true, what is the alternative solution instead of ITS functionality is WAS?
Message was edited by:
Andras HegerHi Andras,
SAP provides different frameworks to program user interface. The most often used framework is the SAP dynpro programming model which is probably used by 80-90 percent of SAP applications. ITS is the technology to display screens based on the dynpro framework in the browser. Because dynpros are so widely used it is very unlikely that SAP will terminate support for ITS in the near future. On the SAP Service Marketplace (http://service.sap.com) following official information can be found for the oldest release of ITS, ITS 6.20 standalone:
ITS 6.20 - supported 'longterm'
The date for end of support for release 6.20 depends on the maintenance deadlines for the SAP products which need the SAP ITS 6.20.
As long as one of these products is supported, the ITS 6.20 will also be supported.
Currently the product with the longest lifecycle is SAP ECC 5.0 (until 31st of March 2013).
For integrated ITS which is a functionality of SAP Netweaver 2004/7.0 the maintenance timeline is as long as for the SAP Netweaver release.
As you see you can expect ITS to be healthy for quite long time.
Please also check the ITS FAQ: <a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/itsFAQs&">https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/itsFAQs&</a>
Best regards,
Klaus -
Some problem about integrated ITS 640
How to change Webgui theme in integrated ITS 640
Dear all ,
My system is ECC5,the Package level it SAPKGPRC05,SAPKB64015,SAPKA64015,SAPKH500010.
now, I configure integrated ITS with T-code SICF .
I create a external aliases "/sap/bc/gui/sap/its/webgui" ,aAfter that I can connect to the
ITS with the following URLs:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
But now ,I have some problem cannot solve as follow:
1 When I logon ITS, the default language is English ,only English and Genman may be
selected,The requirement is that I want to use other language as the default logon language.
When I on the pop-up dialog box "Change External Alias" tab " Service data" ,"Anymous Logon
Data "select a Language "Chinese",the system pop-up a message box show "code page not
supported".how can i configure the default logon language ?
2 I hope use "https"-- Security Reqiurements ,as a security link ,so I selected "SSL",aAfter
that I can connect to the ITS with the following URLs:
https://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
IE show cannot find the web system .
And use the following urls:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
only show the logon page and notice the error "Logon not possible; none of the active logon
procedures is possible"
and how can I configure the "https" ? and must configure with se38 "W3_PUBLISH_SERVICES"
program together ,if like that ,i must republish all of the component again ?
3 I hope change the webgui theme , in ITS620 have theme 00,90 ,99 .and we can select
"EnjoySAP". but in integrated ITS 640 , i donot know where to find the its admin page to
setup the theme . can you tell me how can i find the admin page to setup the theme .
thanks all ,hope your reply !
Message was edited by:
Benson LuHi,
Hope this Information is useful.
The SAP Integrated ITS only supports the new "Tradeshow" design (unlike the "standalone" ITS which also supports the well-known EnjoySAP design). The new design is more easily incorporated into the Enterprise Portal and is better adapted to the design of other SAP Web UI technologies (BSP, WebDynpro).
There are also changes to the header area in SAP integrated ITS in Tradeshow: The menu bar and standard toolbar functions are collected on either side of the transaction code field in the buttons "Menu" (on the left) and "System" (on the right). The application toolbar elements are then displayed to the right. Instead of symbols, the system displays the text description. If there is insufficient space to display all buttons, you can display the other elements by choosing the "More" button to the right of the screen.
Exceptions:
In Release 6.40 (NetWeaver 2004) , the new design is only available for the Internet Explorer. As of Release 7.00 (NetWeaver 2004s), it is also available for Firefox and Mozilla Browser. For this reason, the Enjoy design continues to be supported for Mozilla and Firefox in Release 6.40 (but only for these browsers, and even then only for this design, and not Tradeshow).
Furthermore, in Release 6.40, there are some Internet Application Components (that is, Web applications that build on the ITS), which continue to be displayed with the "Enjoy" design. Of course, the "Enjoy" design continues to be supported for these applications.
You can use SITSPMON Transaction to monitor the integrated ITS.
Thanks,
Tanuj
Maybe you are looking for
-
So I havent been able to connect to the iTunes store since June. It's getting a tad annoying. I followed all of the troubleshooting steps that i could find, and I am currently on the last one, which involves making sure that the ports that iTunes nee
-
China App Store software to limit free often prompted to change the price, can not buy ", there is no way to solve?
-
Hi All i need help with this: Modify report RFUMSV00 to include customer detail, supplier details and withholding tax charged.
-
Hello, when using iCloud.com, the reminders appear in a different order then they do on my Mac, iPhone, etc. This has always been an issue. However, there is now an even more anoying issue... For the last few days, my first reminders list named "Remi
-
IPad2 won't connect to anything after IOS6 Update
Does anyone have any new ideas how to make an iPad2 connect to iStore/Internet/Anything network related after IOS6 Update? I have tried everything listed on Apple support Communities including release and renew IP/ Hard reset the iPad/ Let it go comp