Standalone USB 3.0 "insert media #1 for the tasksequence...

Hi,
I have multiple USB 3.0 sticks with the standalone tasksequence (windows 7) on that stop installing. 
I can boot i WinPE and the stick is recognized (since I imported the USB drivers in winPE 4.0). So I can start the installation.
However, after the "apply OS image" step and after the "apply driver packages" step the system reboots in the new Windows 7 env to continue the TS but the USB stick is no longer recognized and i'm asked to insert media #1 ...
I have to remove the stick, and put it a second later back in the same USB port, then it gets recognized again and the installation can continue. I tried to resolve the problem by importing the USB3.0 drivers straight into the windows7 OS before my initial
capture... Same problem.
The drivers are there, the stick is just not recognized during the reboot... it only gets recognized when i remove, re-enter it.
This is a problem for years now, but since our new laptops no longer have USB2 ports, it gets a big pain...
Anybody an idea how to solve this ?
Thanks a lot !
Jeroen

Hi,
I suggest you ask this question in Windows 7 forum, you could get better support from there.
http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • OSD - USB insert media #1 for the task sequence

    Hi
    I'm creating a standalone media for USB
    Step that I did
    1. Create a Standalone media to .iso files
    2. Diskpart - I prepared the USB using the diskpart command
    3. Extract the standalone.iso files in the USB  (copy the contents)
    everything is work fine, exempt the packages that I included in the stanadlone TS is NOT installed and asking for "insert media #1 for the task sequence"
    This issue arise only when I used the USB
    Content of T.S  (stand alone task sequence)
    a. Windows 7 and company standard application
    b. Packages 1 : Install the 7Zip
    c. Packages 2 : Install the update for the acrobat reader
    I don't want to recreate the images due to minor changes and it will consume time also, that's why I added in the T.S place in USB
     Please advise , what is wrong
    Robert

    Hi,
    We also get the same problem, and at the time it occurs the USB stick does not show up in notepad, or in diskpart list disk.  
    It happens after the windows 7 image is apply just as it's trying to install the applications.

  • A Better Media Player for the N900???

    Just curious if anyone knows of a better media player for the N900....one that will allow the building of playlist like the N95 8GB did.  Basically just want to be able to better categorize my music and have specific playlists for different events...workouts, relaxation etc.  Thanks in advance
    Solved!
    Go to Solution.

    fardawg wrote:
    I just removed the 16GB SD card on which I had all my music stored.  I put it right back in....booted the phone up and now the phone doesn't even recognize that the card is installed.  Previously, it showed up in Settings....memory as N900 Micro.  Now it just shows a red icon indicating that no SD card is installed, when in fact it is.  What's up with this phone?  One glitch after another.  First it fails to find any contacts when creating a new SMS (I have 194 contacts in fact)....now it won't even recognize that the mini SD is installed.  I'm seriously considering returning it.
    Have you replaced the back on the phone? The phone won't find the card without the back in place.
    And you don't have to switch the phone off to remove the card, either.

  • Home Media experience for the whole family

    I'm new to using iTunes. I just recently got an iPhone 4s and even more recently; an iPad. I live in my house with my wife and 3 children.  We all have iPhones and iPads. I think everyone already has their own Apple ID account. I have a home wifi network and a Windows 2008 server with a file share of some .mp4 video files.  I bought iHome Server (software) and I like it because is auto tags the movie files meta data, and keeps iTunes up and running on the Windows 2008 server. Right now I have my iPhone, iTunes (on the server), and iPad all using my Apple ID and I can watch movies on the iPad and iPhone with the Home Share just fine.
    HOWEVER, how do I allow my wife and kids to stream movies to their Apple devices on our home network?  My understanding in that Home Sharing requires all devices to use the same Apple ID account. Can I create a new Apple ID account just for the media home share?  Is it possible to setup the iPhones and iPads to use one Apple ID account for buying apps and such from the iTunes Store, yet another Apple ID for streaming from the home share?  Will it allow all of these devices to connect? If every iPhone and iPad in my house were to connect to my media share that's 5 iPhones and 5 iPads!  If I get all of this figured out, I may even include a couple of Apple TV's!
    I'm trying to create a total home entertainment experience, and I'm just looking for how to accomplish this. 

    Sorry guys,
    after surfing through "More Like This" I found my answers

  • Restrict insertion of records for the second time.

    I have a Form with header and Details Block.I make an entry for the first time in both header and details block with some three field combination such as Item code,item category and region
    Records are Inserted in the respective tables.Now when i am going to enter in the form with that same three fiel;d combination, INSERT and DELETE should be Restricted.How to Implement the same.

    hi Amatulla,
    As u said i tried ur condition in "When create record".But that fails.
    So i tried the same in "When new Block instance".Getting 50% of my Desired Results.
    Here's the Condition i gave
    IF CNT > 0 THEN
    SET_BLOCK_PROPERTY('TI_PPS_DETAILS_V',INSERT_ALLOWED, PROPERTY_FALSE);
    SET_BLOCK_PROPERTY('TI_PPS_DETAILS_V',DELETE_ALLOWED, PROPERTY_FALSE);
    ELSE
    SET_BLOCK_PROPERTY('TI_PPS_DETAILS_V',INSERT_ALLOWED, PROPERTY_TRUE);
    SET_BLOCK_PROPERTY('TI_PPS_DETAILS_V',DELETE_ALLOWED, PROPERTY_TRUE);
    END IF;
    END ;
    after this condition is given, i am unable to update the already Entered Record.
    The condition is i can update my already entered Record for a given combination.
    Can anyone help pls....

  • Can I download the media player for the 8350i onto an 8330?

    I recently purchased a 8350i (but took it back because I don't want the Nextel feature from), however, I the media player on the 8350i was much improved from the 8330 from Sprint.  Is there any way to download the media player that is on the 8350i onto the 8330? 

    You can't change just the media player.  However, you can upgrade your OS on your 8330 to the latest and get a little better media player.  Spring doesn't have a 4.5 OS update but Verizon and other cdma carriers do.  Just use one of those.  It won't be the same as on the 8350, though, I don't think.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Insert several dates for the same event

    Hey guys,
    I have two tables joined. 1 with dates and venue, the other
    with speakers.
    How can I add more dates to the same speaker during his
    programme of appearance. i.e. Speaker A will be appearing for the
    following dates: 20/02/2007 - 27/02/2007 & 5/03/2007.....
    I was thinking of a Date fiels and a dropdown dynamic field.
    But I'm having problems figuring it out...
    Any help would be very much appreciated..
    Thanks

    Thanks Sabaidee,
    Please find below the whole code:
    <cfset CurrentPage=GetFileFromPath(GetTemplatePath())>
    <cfif IsDefined("FORM.MM_InsertRecord") AND
    FORM.MM_InsertRecord EQ
    "insert">
    <cfquery datasource="utcg302">
    INSERT INTO speaker (speakerName, venue, eventDate)
    VALUES (
    <cfif IsDefined("FORM.speaker") AND #FORM.speaker# NEQ
    "">
    <cfqueryparam value="#FORM.speaker#"
    cfsqltype="cf_sql_clob"
    maxlength="150">
    <cfelse>
    </cfif>
    <cfif IsDefined("FORM.Venue") AND #FORM.Venue# NEQ "">
    <cfqueryparam value="#FORM.Venue#"
    cfsqltype="cf_sql_clob"
    maxlength="50">
    <cfelse>
    </cfif>
    <cfif IsDefined("FORM.date") AND #FORM.date# NEQ "">
    <cfqueryparam value="#FORM.date#"
    cfsqltype="cf_sql_timestamp">
    <cfelse>
    NULL
    </cfif>
    </cfquery>
    </cfif>
    <cfquery name="rsInsert" datasource="utcg300">
    SELECT speaker.speakerID, speaker.speakerName, speaker.venue,
    speaker.eventDate, review.reviewID, review.review
    FROM speaker INNER JOIN review ON speaker.actID =
    review.actID
    ORDER BY speaker.eventDate
    </cfquery>
    <form
    action="<cfoutput>#CurrentPage#</cfoutput>" id="insert"
    name="insert"
    method="POST">
    <label for="textfield">Date</label>
    <p>
    <input name="date" type="text" id="date" />
    </p>
    <table width="200">
    <tr>
    <td><label>
    <input type="radio" name="Venue" value="Stoney" />
    Stoney</label></td>
    </tr>
    <tr>
    <td><label>
    <input type="radio" name="Venue" value="William Edwards"
    />
    William Edwards</label></td>
    </tr>
    </table>
    <p> </p>
    <p>
    <label for="select">speaker</label>
    <select name="speaker" id="Speaker">
    <option value="">Choose One</option>
    <option value=""></option><cfoutput
    query="rsInsert">
    <option
    value="#rsInsert.speakerID#">#rsInsert.speakerName#</option>
    </cfoutput>
    </select>
    <p>
    <label for="Submit"></label>
    <input type="submit" name="Submit" value="Submit"
    id="Submit" />
    </p>
    <input type="hidden" name="MM_InsertRecord"
    value="insert">
    </form>

  • Media Controls for the Qosmio x505 q870

    Hi there,
    I recently purchased the Qosmio X505 q870 machine, and it came with the side media center control panel. Everytime one of those buttons is pushed, a loud beep is produced, and even muting the speakers still causes this beep. I am wondering if there is anyway to remove this beep from the machine, and still keep the functionality of the media control panel.
    Thanks, Jesse.

    Thanks for pointing that out.
    For others who are looking at this thread...
    See the section TOSHIBA Hardware Setup on p. 155 of the User's Guide.
       Qosmio X500 Series User’s Guide
    You'll see the Button Setting tab in the HWSetup window.
    -Jerry

  • Is USB 3.0 a valid option for the 610-1280qd CTO?

    When I ordered my 610-1280qd CTO Prod No. QB912AV#ABA ten days ago the online customizer did not list a USB 3.0 option--and still does not today.  I definitely would have opted for it if it had it been a selectable option.   Is the online customizer in error, or are the following linked spec sheets which show a USB 3.0 option in error?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03014528&tmp_task=prodinfoCategory&cc=us&dlc=en...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02852315&cc=us&dlc=en&lang=en&lc=en&product=515...

    Hi,
    I suggest you ask this question in Windows 7 forum, you could get better support from there.
    http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Is there a DLNA compliant Media Server for the iMAC

    Is ther a DLNA compliant Media Server that will run on an Intel based iMAC running Lion?

    I used to have a 30 foot HDMI cable going from my Mac to my Denon receiver (which just turned in to a second monitor) and using Plex, I would play my HD MKV files without issue.  Now my Mac mini is in one room and the home theater is in another and I can't get any AVI or MKV files to play through my Samsung equipment.  Vuze SUPPOSEDLY supports streaming to thousands of DLNA devices but while I could see my files, none of them would play.  I've also tried Plex, VLC, EyeConnect, and TVMobili.  I have the same problem with all of them.  Either they won't play MKV files, or I'll select an AVI and it'll see the file but never play it.  Then each server, in its own way, disconnects from my device.
    Hardware:
    Samsung PN51D8000 Plasma
    Samsung BD-D5500 Blu-Ray
    Denon 3808CI
    Mac Mini - Intel 2.4GHz, 8 GB RAM, OS X Lion 10.7.2
    Thanks for any assistance anyone can provide.

  • What are compatible media files for the Tungsten E2

    I have a video clip that I'd like to put on my Tungsten E2.  The current file is saved as a .wmv.  When I attempt to sync using the Palm desktop software's media feature, I get the message that the file format is not compatible.   I can't find any information as to what are compatible file formats.  Any advice for me?
    Post relates to: Tungsten E2

    Avi's and mpg's are pretty safe.  Wmv's and .mov's won't sync.
    Wyrenut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but the automtic function doesn't see them. Can I insert a point for the layer split in DVD Studio Pro 3 or 4? It doesn't appear that the autom

    I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but auto function does not see them. Went back and put a small split in the timeline in fcp and exported to mpeg 2 again and auto function does not see that either? Manual msays to manualy enter split poind in DVDSP but can't find any way to enter that split point in DVDSP? How can I manualy enter a split point in DVDSP 3 or 4?
    Elizabeth/Roger Cook Films

    This is definitely not the behavior I see.  When I left click it adds a marker,
    When I right click, I see the following
    Do you have any OS hacks installed on your computer or have you changed the mouse behavior in system preferences:  mouse?  If not, I'd suggest you run digital rebellions preference manager and reset your dvdsp preferences. 
    https://discussions.apple.com/docs/DOC-2491

  • Is it possible to set a default media player for the iPhone?

    I have a music subscription with another company, therefore all my music is played through their app. When I plug my phone into my car to play music, it always opens iTunes and alerts me there is no music there so I have to open the app and select the music. Which is fine, but when the app stops (for whatever reason), the iTunes (which I'm not sure why they don't call iMusic or something equally silly) tries to play any music I have in iTunes. Is there any way to stop this madness? Thanks!

    There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

  • Social media management for the Q10

    Greetings all.
    First post.
    I'm looking for an app that I can use on my Q10 to manage multiple Twitter and Facebook pages.  I currently use Hootsuite on my laptop, but there's currently no Q10 equivalent, that I can see.
    Thoughts?
    Many thanks,
    Katrina
    ps - my computer also won't support Blackberry Link, but one issue at a time 

    Hi and Welcome to the community!
    I don't know if any have yet been ported to the Q10, but there are several side-loads available that may do what you desire. For me, Plume is my choice...but at present the FaceBook integration isn't working (I need to see about updating to a later Plume version, but have to work on how to create my own .bar files).
    If side-loading is of interest, you can research that in many places...with the DDPB app for Windows being my personal choice. And there are lots and lots of websites with .bar files already available, plus utilities for converting from IOS/Android install files over to .bar.
    If you are looking solely for a true native BB10 app, then your results will naturally be a bit more limited, and will likely require a fee-based app rather than anything free.
    I'm hoping that SocialScope will come out with a BB10 version, as that was truly my favorite aggregator ever.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can I convert a USB printer, Canon IP3000 to AirPrint for the Ipad

    Can I convert a USB printer, namely a Canon Pixma IP3000 to an Ipad? This printer has pict bridge but not air print. Are there adapters available to purchase to make this happen.

    The only printing the iPad supports is wireless printing. You could look into connecting that printer to a router and see if there's some support (I've never tried it but you could look into an airport express and see if it might work)

Maybe you are looking for