Standard 9, missing EDIT PDF PORTFOLIO side bar after recent update

I can't find the place to enable the view of the "EDIT PDF PORTFOLIO" sidebar.
I've always had it, but Acrobat updated recently, and it's gone.

That can't be correct.
I've had the function all along until a recent update.
In addition, I currently can still create and manipulate files within a portfolio.
I lost a functionality of changing order of contents, and need that sidebar to change the layout.

Similar Messages

New-host-5 under "shared" in finder side bar after Lion update

Just upgrade from Snow Leopard to Lion.
Intermittently I am now seeing "new-host-5" in the SHARED section of the side bar of a finder window. Switching WiFi off and back on makes it disappear and not come back.
Any help on tracking this down is much appreciated.
Thanks, C

Just did a little more digging and found that the IP address for "new-host-5" is the same as the one for my iMac, who is also on the network. Curiously enough the machine also shows up in the SHARED section with it's real name. Very puzzeling!

Photo stream added to side bar but not updating

I've added Photo Stream to the Finder Side Bar of OSX Mavericks through the Smart Folder Saved Search option.
However, the photo stream in the Finder Side Bar is not updating with new pictures taken from my iPhone.
Would anyone have a solution possibly to allow the photo stream to update and be shown in the Finder?

Hmmm... not sure about PC but I did have this same problem while syncing to my MAC... the cause was that my contacts sync was conflicting with other sync data... Once I changed settings for Mobile Me with contacts and address book it was resolved...
For PC... my only guess would be that a program that is told to sync contacts doesn't allow or is conflicting with the assigned photo you've set on iPhone...

Iphone device doesn't show up on the side bar after new driver installed. How do I fix this?

I had to install a new drive into my laptop. When I tried to download an audible book into my Iphone the device doesn't show on the side bar anymore. When I try to sync it from Itunes it doesn't do anything either. Any suggestions on how to get my phone device back on the side bar?

itunes/presentation/ show side bar

After recent update to firefox, can no longer read attachments in word or pdf. other computer can. what happened?

recently updated firefox, per suggestion. now, on computer with update, can no longer read word/pdf attachments. can still do so with adobe 5 on old computer. what happened? what do i have to do?
== This happened ==
Every time Firefox opened

Extensions that may '''interfere with Back Button''', and these are already listed in [http://kb.mozillazine.org/Problematic_extensions Problematic extensions] for other reasons
*McAfee Site Advisor see [https://support.mozilla.com/questions/805964 805964] (update perhaps 3rd week July 2011)
*Yahoo Toolbar (https://support.mozilla.com/questions/845691)
Back/Forward Home don't work in 7.0.1 due to '''network.http.max-connection'''s being upped to 256, reduce back down to 32.
*https://support.mozilla.com/questions/889087
Back/Forward: navigation/buttons are disabled (repair with an extension)
*http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

PDFs capped 34 pages after iBooks update

My entire PDF collection lost their front covers and are all capped to 34 pages after the update.
Any fixes for this yet?

Solved this way: Start up iTunes, de-select all the PDFs on the device, hit synchronize. Re-select all the PDFs again on the device and hit synchronize. Books will be removed then re-added to the device with front covers and correct no of pages.

HT201250 my Time Machine back up icon is missing form my finder side bar.

When i try to do a back up it says that "back up disk is not available" even though my external hard drive is connected via USB. I have also tried re-starting my computer and that didnt work. i also have tried connecting and resonnecting the USB, that didnt work either.

Launch Disk Utility. Is the backup volume listed? If so, is it mounted (the mount status is shown at the bottom of the window when the volume is selected)? If it's not mounted, can you mount it by clicking the Mount button in the toolbar?

Missing key figures from planning area after recent transports

Hi,
We are facing an issue of data not loaded to the planning area , realized this after planning book does not show any values in the current week bucket. However the required values show up in the Infocube. Our setup is as below on SCM 7
external FILE---> FILE DataSource -
>CUBE -
> /SAPAPO/RTSINPUT_CUBE program -
> Planning area ---> planning book
Recent transports included selelction variant for the above program and now we see that some Key Figures are missing from Planning area from the KEY FIG assignement tab option from the above RTSINPUT_CUBE program.
Can any one please help
Edited by: AAL123 on May 19, 2011 11:25 AM

Hi,
Did you check what all change objects have been selected in your trasport request which is causing this?
Best Regards,
Chandu.

No "reader" button in url bar after iOS5 update

I updated my iPhone 4 with iOS5. I don't see the "Reader" button in the URL bar in Safari.

I've noticed the same thing in both my iPhone 4s and iPad running iOS 5. I don't see the "Reader" button in Safari's url address window? Am I missing something?
Ooops... never mind. I understand now. It only appears when websites or articles support the feature

[SOLVED]libpcre.so.0 missing - reboot hangs after recent update

Hi,
I did an update today, the update for filesystem said that libpcre.so.0 is missing. Where can I find it? Do I need it? Thanks for a reply before I need to restart - and possibly lose my system...
Current stuff installed
grep 2.10-3
filesystem 2012.2-2
pcre 8.30-1
The trouble seemed to happen when adding a group that aleready exists...
Thor
Edit - trusting the post at https://bbs.archlinux.org/viewtopic.php … 3#p1060743 and more to the point, post 11 (by falconindy) - I'll reboot, hoping to be back...
Last edited by Thor@Flanders (2012-02-22 16:21:19)

Thor@Flanders wrote:The system wanted to start HAL up, not possible, as HAL was not loaded anymore. Udev got upgraded, HAL was out of the picture since then.
Not the case. HAL still works fine with the latest udev. The issue must have been elsewhere.
@karol: I'd say a lot of people had something installed that used hal. That something moved on, but people kept hal, not knowing they don't need it anymore.

Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808

Standard PCI to PCI bridge no longer working after BIOS update

Hey everyone,
Before I get into the details of what is probably the most frustrating computer problem I have ever faced I would first like to say hello because this is my first post and I give you my system specs.
Windows 7 ultimate x64
GA-M61PME-S2P (rev 1.0) MOBO
2x 120GB Mushkin SSD @3.5gbps Raid 0
AMD Phenom II x4 @2.2 GHZ (Old processor that I replaced)
AMD Phenom II 1090T x6 @ 3.2GHZ (New processor that replaced the Phenom x4)
MSI Cyclone GTX 550 TI OC (Nvidia)
8 Gigs 800mhz DDR2 RAM (Computer Bay)
I have had a GA-M61PME-S2P (rev 1.0) board for several years now and have never had any problems. I recently bought a brand new AMD phenom II x6 1090T processor because it was listed as being supported by my board. The BIOS version that I had installed before purchasing this processor (version F5) was unable to recognize my new processor and boot so I had to update to the latest version (version F7b). After flashing my BIOS with the new version I was able to boot and my computer recognized my processor with the correct name and clock speeds. Unfortunately it now no longer recognizes one of my standard PCI to PCI bridges. Of the two standard PCI to PCI bridges listed in device manager one of them has a yellow exclamation point and reads "error code 35 firmware does not contain enough info to configure this device". I have tried everything I can think of but just cant seem to get my processor and graphics card to work under the same BIOS version. I will now list every step I have taken;
1.) I have re-flashed several times between versions F5 and F7b but always get the same results
2.) I have used Driver cleaner in safe mode to wipe all drivers and then double checked programs and features to make sure nothing was still installed.
3.) I have installed all drivers for the board from Gigabytes website, although when I try to install the VGA driver i get an error saying that no device could be found that supports the driver.
4.) I once again wiped everything in safe mode and then found the latest chipset drivers for nvidia Nforce from NVidia's site but got the same results.
5.) I tried downloading the F7b BIOS from some random website just in case the file from Gigabyte was somehow broken but this did not change anything. (I know that's generally a bad idea but I am desperate)
6.) I uninstalled the problem standard PCI to PCI bridge in device manager and restarted my computer but got the same results.
7.) I tried installing my graphics card drivers from MSI but got an error saying that no supported hardware could be found.
8.) I tried installing a number of different versions of the Nvidia graphics card drivers for my series but kept getting that same error message
9.) I downloaded the Graphics card detector program that NVidia provides on their site but it told me that it could not detect my graphics card.
10.) I tried Flashing my BIOS to the F6 version for the rev 1.3 board but this turned out to be a huge mistake because my computer would no longer post after this and I had to use a FAT32 flash drive and the q-flash utility to bring it back to life.
11.) I checked over and over and over again that my BIOS settings were right and nothing was setup to only use on-board graphics.
12.) I tried downloading a driver that was supposedly for the PCI to PCI bridge but im fairly sure this was just a trojan because the install did not complete and I found tons of fun plugins installed afterwards (I reformatted shortly after this).
13.) I made sure that my new processor was plugged in and that my BIOS was version F7b and then completely wiped my hard drive and re-installed windows 7 ultimate x64 but got the same results.
14.) I made a bootable DOS flash drive and tried updating my Graphics card BIOS but found that I already have the latest version.
What I don't understand is that my graphics card works perfectly with BIOS version F5 and my processor works perfectly with BIOS version F7b but under no circumstance do they both work at the same time. It may be worth noting that with version F7b installed I am still able to use my graphics card ( my Monitor is plugged into it via DVI) It just gives me the error under device manager and I can not install any drivers.
If anyone out there can help me I will be insanely grateful and will refer to you from then on as the master of all things MSI. I'm at my wits end, If you need any further info just ask and I will provide.

Ah ok I was afraid you were going to say that. I will take this to gigabyte then but just so I know, This PCI to PCI bridge problem couldn't have anything to do with my MSI graphics card BIOS somehow not being compatible with the Gigabyte BIOS?
-Thank you!

Safari Not Showing Web Address in Address Bar after Lion Update

Sometimes the address bar is blank (save the "Go to this address" message.) Other times, it reads only the hompage address for a site I visit. For example, if I'm reading CNN.com, it will only show "www.cnn.com" no matter what page within cnn.com I go. So, for example, if I want to copy the address of a certain article, I cannot copy it from the address bar as that will only give me "http://www.cnn.com."
Other times, if I visit cnn.com, for example, and then create a new tab and go to apple.com, the new tab will not show apple's web address, but remain as cnn.com's address. If I decide I need to reload apple's website, it will reload CNN's as that is what's in the address bar.
Does anyone have a fix to this?

this happened to me too. for one reason or another, the url address disappeared and i kept getting "go to this address". but found this to work:
1. minimize your screen
2. under the "view" menu, click "show toolbar".
3. when you maximize your screen, the url address should now be there.
hope it works.

Problems with Menu Bar after recent security update

Ever since installing yesterday's security update I have been having problems with the menu bar. When clicking on the blue Apple in the upper left hand corner, no drop-down menu appears as it should. This problem also occurs in the drop-down menu named for the program in various instances (Thunderbird, Azureus, iTunes, Finder, Firefox) but not in others (Safari, Adium, VLC). Sometimes the menus are simply truncated and do not include all the options they should rather than not opening at all.
I have run Disk Utlity which found no problems and have performed a hard restart multiple times but the problem persists. Any advice would be very helpful. Thank you.

Thanks for the help. I tried most of the solutions listed in the link you supplied, but am still having the same problem. However, when I tried to run the Tiger Cache Cleaner, I got the following error message:
Runtime Error 4: Failed Assertion
Location: /Volumes/RBUS/Common/MacOs/MacOSMenu.cpp:420
Failure Condition: appMenu
Failure Message:
Please report what caused this error along with the details above.
Thoughts?

Blackberry frozen at 3/4 loading bar after software update

Hello I have blackberry torch9810, it suddenly started restarting after i disconnected from my laptop. The laodaing bar completes and starts again from the beginning so I guess it is in restarting loop. I tried removing the battery and connecting it with dektop software, it gave me the option to retry connecting or updtae it. I did the update, all went well it downloads the software, installs it and then at the end it gets stuck on the message "connecting to the device". The loading bar on the phone's screen freezes at almost 75%. Any suggestions? please help.......

You could try this......
http://crackberry.com/blackberry-101-how-install-or-upgrade-new-rim-blackberry-operating-system-os
Rich C (PKcable)
From Crackberry.com
If I have been helpful please click like! Use the Thumbs up icon below this message.

Standard 9, missing EDIT PDF PORTFOLIO side bar after recent update

Similar Messages

Maybe you are looking for